I am not sure if i am on the right section. Just kindly move this thread to the right section if im wrong. Thanks.
So, i have flashed Cyanogenmod Rom on my GT 15800 phone using Odin Multidownloader v 2.252.
The flash was successful, then i tweaked on some settings on the recovery and got my phone bricked.
I can still access download mode through voldown+homekey+powerbutton.
Before, i can also access the recovery mode.
I have tried odin to reflash again CWM on my phone, but is stucked on factory.rfs for an hour so i tried to abort it. Closed Odin and unplugged the USB cable.
Now, i cant access the recovery mode. Whenever i open my phone and access recovery mode, i get this.
And Odin doesnt recognize my phone anymore.
Kies aren't running also.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But i can still access Download mode.
While trying OneClick Unbrick from here http://forum.xda-developers.com/showthread.php?t=1153310
I always get this error message.
Yes, my phone is connected to the computer and is in download mode. So i tried clicking on the resolution center.
So i tried the first solution and this is what i get.
Im running on Windows 7 Home Premium 64-bit.
When I tried the second one, everything worked fine.
And for the third one, it worked fine too.
Now, im running out of solutions on how to unbrick my phone. I have tried everything I can.
Can anyone help me?
Dannahsaur said:
I am not sure if i am on the right section. Just kindly move this thread to the right section if im wrong. Thanks.
So, i have flashed Cyanogenmod Rom on my GT 15800 phone using Odin Multidownloader v 2.252.
The flash was successful, then i tweaked on some settings on the recovery and got my phone bricked.
I can still access download mode through voldown+homekey+powerbutton.
Before, i can also access the recovery mode.
I have tried odin to reflash again CWM on my phone, but is stucked on factory.rfs for an hour so i tried to abort it. Closed Odin and unplugged the USB cable.
Now, i cant access the recovery mode. Whenever i open my phone and access recovery mode, i get this.
And Odin doesnt recognize my phone anymore.
Kies aren't running also.
But i can still access Download mode.
While trying OneClick Unbrick from here http://forum.xda-developers.com/showthread.php?t=1153310
I always get this error message.
Yes, my phone is connected to the computer and is in download mode. So i tried clicking on the resolution center.
So i tried the first solution and this is what i get.
Im running on Windows 7 Home Premium 64-bit.
When I tried the second one, everything worked fine.
And for the third one, it worked fine too.
Now, im running out of solutions on how to unbrick my phone. I have tried everything I can.
Can anyone help me?
Click to expand...
Click to collapse
I have faced the same problem with my home PC. But it detected with my office PC. Maybe windows stopped detecting it due to errors in drivers. Try on another pc or format your windows installation.
sekhargreen said:
I have faced the same problem with my home PC. But it detected with my office PC. Maybe windows stopped detecting it due to errors in drivers. Try on another pc or format your windows installation.
Click to expand...
Click to collapse
After trying it with another PC, you were able to unbrick your phone?
Try re-installing your drivers,that may help you out
it looks like you need a 32bit Windows version to use OneClick Unbrick
give it a try on another pc
I have the Problem
hello i have the same problem.
im using Odin 3 but it doesnt reconized it, i got all the drivers, the oneClick Unbrick was avaible to brick back the device, but now i cant flash it anymore, because Odin doesnt reconized it.
ive tried everything please help me.
Im running everything on Windows 7 32bits
Try this.
Take out the battery.now,while the battery is out,plug your phone into pc,and while holding vol down+home+power and phone plugged in,someone that can help you needs to put the battery while you are holding all this.it worked that way for me,i had the odin doesnt recognize problem.i tried two pc's,it didnt work.
Sent from my GT-I5800 using xda premium
First of all remember if you have usb debugging is ON.Secondly try on other pc Desktop,Laptop,Macbook and different versions.Thirstly use odin 3.Finally if it's stuck it's software problem try searching the right Stock roms for your phone.Hope this helps..Be careful with modding your phone you can no longer use android.
Try flashing zerofill tar first through force recovery mode. Refer to my old post from profile for step by step procedure.
Sent from my LG-E610 using xda app-developers app
Related
I just bought this phone off of eBay, and I'm trying to root it. From what I read I have to install CWM recovery then flash a rooted stock 2.3.3. So I try to install cwm recovery. http://forum.xda-developers.com/showthread.php?t=1056847 but I am stuck at step 4 after I plug in the usb to my phone while holding the volume bottoms... nothing pops up, no window saying detects a new APX device. Please help this noob.
Sent from my LG-P999 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1056847
Try this.. Your battery must be out. Double check in device manager that apx is not there. Sometimes it won't show an error or pop up Windows stating "apx device found". Also reboot your computer and try again. My computer for some reason doesn't recognize usb sometimes. Oh and use same usb port
Sent from my LG-P999 using XDA
Thank you but I have tried that post also. Just can't get the apx error to pop up so I can browse the apx folder. I tried just connect my phone to the PC with the phone on but it just doesn't connect....I wonder if my phones usb port is messed up...it charges just fine though.
Sent from my LG-P999 using Tapatalk
Try another one. Reboot both phone and computer. Try a different usb port. It should pick it up. Then continue with your steps. Try installing lg drivers. 1st
Sent from my LG-P999 using XDA
I think did install LG drivers....if you mean that one .exe file call lgdriver...well I guess I'll keep trying hopefully it works.
Sent from my LG-P999 using Tapatalk
It should work then. Try a different usb cable and computer if possible.
Sent from my LG-P999 using XDA
Oh BTW is there any easier way?
Sent from my LG-P999 using Tapatalk
What version windows r u using? Vista have dat problem
I was using window 7. Going to go home later and try another cable with another laptop
Sent from my LG-P999 using Tapatalk
okay, so i tried 4 different types of usb cables and 3 different computers...2 are windows 7 and 1 is windows xp...still stuck at step 4...i dont understand...
There is no easier way. This is the simplest way. I just don't understand why your computer is not recognizing the phone. Maybe it's hardware problems? Did you check under device manager and didn't see apx???
Sent from my LG-P999 using XDA
No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk
lilviet93 said:
No I don't see apx anywhere
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Ok, humor us for a sec (or maybe just me) open up your device manager, with battery out, proper button combo (power+both volume buttons?), phone plugged in and hit print screen on your computer keyboard, then open paint and hit paste. Save that as a JPEG and upload it here.
Sent from my LG-P999 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.
Did you click to open usb controllers. Apx should be in there
Sent from my LG-P999 using XDA
yeah i did, the phone just seem to won't connect at all my nokia phone connects just fine
lilviet93 said:
There...I even did power+volume bottons. I think there is something wrong with the usb of the phone. I plugged it in the pc with power on and nothing pop up dont even ask me to mount my sd card.
Click to expand...
Click to collapse
Weird... I am not seeing any LG drivers in your image? On my PC I have one LG driver under modem (this computer isn't set-up for flashing this phone, my laptop is)
I also used NVFlash (as One click wasn't working at that time due to having 2.3.4 from TMo) and I remembered that I had to install the LG updater tool first to get the latest drivers installed before I used NVFlasher and got everything to work.
I remember it was a real pain at the time due to having GB 2.3.4 from factory, I know you have 2.3.3 but try that step out as it might help.
so how would I use NVFlash to root my phone? If you could please explain the steps thank you
lilviet93 said:
so how would I use NVFlash to root my phone? If you could please explain the steps thank you
Click to expand...
Click to collapse
Wow...it's been so long...
I know I used the LG Updater tool to install the latest LG drivers on the computer
Then I DL'd and used the NVFlasher, following the directions for it (with out the drivers the computer won't see your phone, so you can't update/root it)
This is where it get fuzzy.. I'm sure this loaded CWM recovery on the phone, so all I had to do was boot into it and make a back-up recovery of the phone. Rebooted the phone as normal. Still had phone connected to PC.
From there I loaded the update.zip (of Eagle's Blood current file) to the mem card
Rebooted to recovery, wiped cache, etc.. as in the instructions. Updated zip from mem card. when done, rebooted. Went thru Googles setup. Rebooted again and phone was rooted.
I had all the treads subscribed on my old account, but I lost the log-in info and had to create a new one :-(
well this bring me back to being stuck at step 4 at the beginning of the post. when i try to install cwm via nvflasher my phone won't connect to the pc at all to install apx drivers
Hello all, so i have a problem. I have a completely stock samsung infuse 4g, running 2.3.6 gingerbread. I would like to root my phone and install a custom rom as i have done before on my last phone, the samsung captivate. I have been running into a problem that continues to annoy me... When i connect my phone to my pc via usb, i get the message on my phone telling me to choose the method i would like to connect, i choose mass storage as i would like to make a backup before i do anything, however, when i choose it, i get the green android logo with the button at the bottom that says "connect to pc". When i click it, the screen thats supposed to show up, shows up, the orange android, however, almost immediately it dissapears before i can even go to "My Computer" to look through the files, and this will happen every time i try it. This has happened since i first got the phone two years ago and has never fixed itself. I have tried multiple usb cables and multiple computers, all to no avail. I'm not new to androids or rooting, but this is just blowing my mind, i cant figure it out. If you guys could help me out, i would greatly appreciate it.
Can you go in to download mode???
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
Can you go in to download mode???
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I havent tried, but would that allow me to transfer files, root, etc?
slayersabre5 said:
I havent tried, but would that allow me to transfer files, root, etc?
Click to expand...
Click to collapse
No but if you can boot in to download mode you can use this to flash the UCLB3 gingerbread 2.3.6 rooted with CWM recovery http://forum.xda-developers.com/showthread.php?t=1613523
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
No but if you can boot in to download mode you can use this to flash the UCLB3 gingerbread 2.3.6 rooted with CWM recovery http://forum.xda-developers.com/showthread.php?t=1613523
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, i can go into download mode. How can i root my phone though without the ability to sync it to my computer?
backup
slayersabre5 said:
Hello all, so i have a problem. I have a completely stock samsung infuse 4g, running 2.3.6 gingerbread. I would like to root my phone and install a custom rom as i have done before on my last phone, the samsung captivate. I have been running into a problem that continues to annoy me... When i connect my phone to my pc via usb, i get the message on my phone telling me to choose the method i would like to connect, i choose mass storage as i would like to make a backup before i do anything, however, when i choose it, i get the green android logo with the button at the bottom that says "connect to pc". When i click it, the screen thats supposed to show up, shows up, the orange android, however, almost immediately it dissapears before i can even go to "My Computer" to look through the files, and this will happen every time i try it. This has happened since i first got the phone two years ago and has never fixed itself. I have tried multiple usb cables and multiple computers, all to no avail. I'm not new to androids or rooting, but this is just blowing my mind, i cant figure it out. If you guys could help me out, i would greatly appreciate it.
Click to expand...
Click to collapse
This method is only going to let you see the internal SD memory . Its not a true backup of your system. Just the storage part. I would like to see a picture of the screen when it is green . This after you selected Mass storage. What version of windows. ? what USB driver for INFUSE are you using. Google account has backed up mostly everything. NOT the ROM. I will be flashing the i997ucb3-CWM-root-deodex-extras.rar Using the Odin Method. Let me know if I can help.
1252 schoobr
Rickrocks013 said:
This method is only going to let you see the internal SD memory . Its not a true backup of your system. Just the storage part. I would like to see a picture of the screen when it is green . This after you selected Mass storage. What version of windows. ? what USB driver for INFUSE are you using. Google account has backed up mostly everything. NOT the ROM. I will be flashing the i997ucb3-CWM-root-deodex-extras.rar Using the Odin Method. Let me know if I can help.
Click to expand...
Click to collapse
i am going to try the method that was suggested, using ODIN to flash everything, including the root. I just gotta see if i can ever get kies to recognize my phone....... once it can i'll begin the ODIN process, but i cant start it till i know if my computer can even communicate with it. and i am using all drivers as provided by the latest version of kies. Windows 7.
[EDIT] i keep getting an error when the drivers try to install, which prevents my computer from being able to recognize my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not trying to double post, but i have come to the conclusion that i cannot get this phone to connect to my computer ODIN cant find it, kies cant find it, nothing. and yes it is on the official samsung binary, official gingerbread, everything. I have restarted muy computer multiple times after deleting and re installing drivers, nothing works i dont get it. This is the only thing stopping me........
slayersabre5 said:
Not trying to double post, but i have come to the conclusion that i cannot get this phone to connect to my computer ODIN cant find it, kies cant find it, nothing. and yes it is on the official samsung binary, official gingerbread, everything. I have restarted muy computer multiple times after deleting and re installing drivers, nothing works i dont get it. This is the only thing stopping me........
Click to expand...
Click to collapse
Turn off your computer anti-virus and try again!
Sent from my SGH-I997 using XDA Premium 4 mobile app
This might help
http://forum.xda-developers.com/showthread.php?t=2397092
[HOW-TO] ROOT, CMW, AND JB 4.3 from stock 2.2.1 without a computer [HOW-TO]
Sent from my SGH-I747 using xda app-developers app
I have been trying to use odin, version 1.85, to flash a stock root of gingerbread. when i use odin to flash it, i keep getting stuck here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have tried multiple times, nothing changes. i cant get kies to recognize my phone so it can fix the firmware, only odin even recognizes it..... And i cannot enter download mode, only the screen on my phone that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" this is the only screen on my phone i can get. and odin keeps freezing at that cache point. i ned help i cant do anything with my phone!
replace CABLE
slayersabre5 said:
I have been trying to use odin, version 1.85, to flash a stock root of gingerbread. when i use odin to flash it, i keep getting stuck here:
i have tried multiple times, nothing changes. i cant get kies to recognize my phone so it can fix the firmware, only odin even recognizes it..... And i cannot enter download mode, only the screen on my phone that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" this is the only screen on my phone i can get. and odin keeps freezing at that cache point. i ned help i cant do anything with my phone!
Click to expand...
Click to collapse
version is not the same. I downloaded from http://forum.xda-developers.com/showthread.php?t=1705260
slayersabre5 said:
I have been trying to use odin, version 1.85, to flash a stock root of gingerbread. when i use odin to flash it, i keep getting stuck here:
i have tried multiple times, nothing changes. i cant get kies to recognize my phone so it can fix the firmware, only odin even recognizes it..... And i cannot enter download mode, only the screen on my phone that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" this is the only screen on my phone i can get. and odin keeps freezing at that cache point. i ned help i cant do anything with my phone!
Click to expand...
Click to collapse
Here try the unbrick package http://forum.xda-developers.com/showthread.php?t=1705260
And make sure you have the android debugging allow.
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
Here try the unbrick package http://forum.xda-developers.com/showthread.php?t=1705260
And make sure you have the android debugging allow.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
its kinda hard to allow debugging when i cant turn the phone on :/
How to enter download mode in Samsung infuse 4g if it is stuck on firmware upgrade encounter an issue
Hi! I recently purchased Lenovo S820 and I'm ultra happy with this device from any aspect! But.. Well, I searched but didn't find CWM for S820 to flash zips, so I decided to try Flash Gordon to flash a zip file, which, all in all, drove my device to have a boot loop, meaning that it stucks on the boot logo and never turns on. I know that the developer of Flash Gordon isn't responsible at all for my brick, but I don't know what to do now because the default recovery of Lenovo S820 is in chinese and I cannot understand a single thing. Can you help me translate it please? You can see the recovery pic below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I googled it and found this, do you think it could work, I mean can I install a whole new rom via SP Flash Tools?
Thanks!
Re flash ur unit with stock ROM using flashtool
Sent from my Lenovo S820_ROW using xda app-developers app
Same problem!
My Lenovo s820 is also stuck in a bootloop after I tried to flash a cwm to it using mobileuncle mtk tools
Now the phone won't go into recovery mode. Everytime I try, it gets stuck in the bootloop where it only shows the lenovo logo and goes off and boots to the same point again, and the loop continues.
It still goes into meta mode and factory mode.
I don't know where to find the stock rom, although I have a backup of it which I took using mtk droid tools
I tried restoring the backup while keeping my phone in meta mode but it did not work
Is it possible to flash the backup using flash tools? Could you give me a tutorial if possible? I'm new to android and don't know much
Please help! I'm panicking and don't know what to do!
First,install MTK preloader drivers
then dL SP_Flash_Tool_v3.1332.0.187
reflash with Stock ROM S820 ROW
after flashing stock rom,you can install
CWM Recovery using Flashtool again.
bakuLaw said:
First,install MTK preloader drivers
then dL SP_Flash_Tool_v3.1332.0.187
reflash with Stock ROM S820 ROW
after flashing stock rom,you can install
CWM Recovery using Flashtool again.
Click to expand...
Click to collapse
It isn't getting flashed! I've tried a lot of times
I put the phone in meta mode and started the flashing process
A pink progress bar happened about 3 or 4 times and then it just stops at 0% and nothing happens at all
Screenshot attached
:crying::crying::crying:
bakuLaw said:
First,install MTK preloader drivers
then dL SP_Flash_Tool_v3.1332.0.187
reflash with Stock ROM S820 ROW
after flashing stock rom,you can install
CWM Recovery using Flashtool again.
Click to expand...
Click to collapse
Thanks! I finally found it!
rohit16 said:
It isn't getting flashed! I've tried a lot of times
I put the phone in meta mode and started the flashing process
A pink progress bar happened about 3 or 4 times and then it just stops at 0% and nothing happens at all
Screenshot attached
:crying::crying::crying:
Click to expand...
Click to collapse
tick preload image
more GUIDE
Same problem here. And when i try to install the preloader drivers i have a massive problem and its really annoying. when i plug in my usb without the battery in into my pc to install the preloader drivers it keeps disconnecting itself i tried using USBDeview but it doesnt help I really need help what is causing my phone to keep disconnecting? Pease Help
please help!?
My s820 was very excellent, after updating my phone, my phone when booting, battery from 100 down to 32, then I charged it. When charging my phone, it is really slow. Please help???
Komander_Krispy said:
Same problem here. And when i try to install the preloader drivers i have a massive problem and its really annoying. when i plug in my usb without the battery in into my pc to install the preloader drivers it keeps disconnecting itself i tried using USBDeview but it doesnt help I really need help what is causing my phone to keep disconnecting? Pease Help
Click to expand...
Click to collapse
You have to install the preloaded drivers first. Then start the flashing process on SP Flash Tools. You'll be prompted to connect your phone. That's when you have to hold the volume down button and connect it without the battery. Your phone will be connected then and the flashing process will happen normally. I had the same issue as you initially but I think its normal because I could still flash my phone and restore it.
rohit16 said:
You have to install the preloaded drivers first. Then start the flashing process on SP Flash Tools. You'll be prompted to connect your phone. That's when you have to hold the volume down button and connect it without the battery. Your phone will be connected then and the flashing process will happen normally. I had the same issue as you initially but I think its normal because I could still flash my phone and restore it.
Click to expand...
Click to collapse
The problem is I can't even install the preloader drivers I'm scared if i use Sp flash tool I cant recover my phone anymore since the preloader drivers cant get installed cause my phone keeps disconnecting from my device manager when i want to update the drivers
bakuLaw said:
First,install MTK preloader drivers
then dL SP_Flash_Tool_v3.1332.0.187
reflash with Stock ROM S820 ROW
after flashing stock rom,you can install
CWM Recovery using Flashtool again.
Click to expand...
Click to collapse
I can not download the stock rom. Link is not working!!!
Link is not working
Hey guys just a quick question. I recently saw a kitkat ROM for the S820 on needroms so I'm assuming lenovo finally rolled out an update and someone made some variations for it. What I want to know is if anyone has tried it, is it good, does it cause any problems, and is it easy to root?
Link to official ROM: http://www.needrom.com/download/lenovo-s820-vibeui-2-0/
Unofficial variations:
1. http://www.needrom.com/download/cyanotek-v1-0/
2. http://www.needrom.com/download/hexnus-snapshot-os-4-4-3/
3. http://www.needrom.com/download/flatdroid-os-4-4-3/
4. http://www.needrom.com/download/nexus-5-os-4-4-3/
Reply
Komander_Krispy said:
Same problem here. And when i try to install the preloader drivers i have a massive problem and its really annoying. when i plug in my usb without the battery in into my pc to install the preloader drivers it keeps disconnecting itself i tried using USBDeview but it doesnt help I really need help what is causing my phone to keep disconnecting? Pease Help
Click to expand...
Click to collapse
Its normal that it got disconnected by itself. You will see it only for few seconds like 2-5 secs. The moment you see it, you need to right click on it and need to install the driver. The driver too is quite small it merely 10Kb. Check this http://forum.xda-developers.com/showthread.php?t=2180436
Hope this helps.
I will be straightforward:
I bought an used OPO, I booted it up, configured the phone, took a photo and then decided to reboot it (turn off and then turn on), then my device simply hard bricked.
1. I already tried turning it on, the device does nothing (no vibration).
2. I already tried using Power + Vol Up and Power + Vol Down, nothing happens (no vibration).
3. Windows recognizes the device as "QHSUSB_BULK", I already tried installing the drivers and using ColorOS flashing tool from here http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 , the device IS RECOGNIZED by the tool, but when I start flashing, it starts a loop when trying to flash the "8974_msimage.mbn" file (the progress bar goes until the end and then the process repeat in the same file).
Yes, the device has the bootloader unlocked, because the previous owner flashed a custom ROM, custom kernel and SuperSU.
No, the device isn't recognized by adb.
No, the device isn't recognized by fastboot.
I already tried searching on Google for this issue, everyone who had this issue never replied saying that they fixed the issue...
I never had any kind of soft/hard brick on my Moto G 2014 (and I flashed custom ROMs constantly on it)... so... can someone help me? Thanks!
I'm also willing to give 5$ on PayPal to someone who can fix this issue.
Also, if I try to use the ColorOS flashing tool, the device disconnects in the middle of the process, causing the infinite flash loop.
First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English
sino1641 said:
First, if you have a computer which installed Windows XP, just flash the ROM with COLOROS tool.
Second,if you a using Windows7 or later,,give me a photo of what the COLOROS tool showed.
Thanks for forgiving my poor English
Click to expand...
Click to collapse
Nah, your english is fine, I could understand what you are saying.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After I clicked "Start"
Then the "device plugged in" sound plays and the process repeats...
It keeps doing this:
(If you can't view the images, click here:
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-39-42.png
http://lori.mrpowergamerbr.com/sharex/Msm8974DownloadTool_2016-07-22_10-40-18.png
http://lori.mrpowergamerbr.com/sharex/2016-07-22_10-41-05.gif
)
Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.
sino1641 said:
Morning,my friend.
I tried to brick my OPO for testing.
Here's the solution.
First,open Device Manager and checked this(dont know how to speak in English):
Second, open COLOROS tool,click start and it will show the situation like what happened to you.
NOW,check Device Manager again.
Has three ways.
1.shows 9006 and MMC storage.COLOROS tool wil continue later.
2.shows QHSUSB_BULK with a yellow ! before,means no driver.
3.shows unknown device,means not enough elec.
You should be the second way.
Third,Disable Signed Driver Enforcement in Windows 7 or later.
My laptop company's suggestion:
http://acer.custhelp.com/app/answer...windows-10:-disable-signed-driver-enforcement
After that, reinstall the bricked driver and everything will be in way 1.
At last,wait for the imgs downloading,unplug microUSB,press power and reboot twice,then you can unlock bootloader and do what you want.
Click to expand...
Click to collapse
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers
MrPowerGamerBR said:
Thanks for replying!
Sadly, your suggestion didn't work, I plugged in the OPO, opened Msm8974DownloadTool.exe and clicked "Start", closed drivers manager and reopened it and nothing changed (It was like your first screenshot)
EDIT: And yes, I'm on Test Mode + Allow Unsigned Drivers
Click to expand...
Click to collapse
Open Device Manager.
Press Power &Vol Up for about 10 seconds.
See if it will change between 9008 and 9006.
I have same thing did it work
I am just wondering if u managed to fix it.
I had the exact same issue. To stop the device from disconnecting, I needed to remove all existing drivers, let the phone charge, plug it into the PC. Hold volume up + power until the PC recognises it. Then I used the color OS flashing tool.
I had to run it as administrator, and it worked fine on Windows 10, without anything extra. However remember you'll lose all your stuff. Lucky for me I had a backup of my entire phone on my PC when I switched file system to F2FS.
This issue in itself has really baffled me. It happened to me when flashing sultans rom, and the phone completely bricked. However I'm using the rom now after fully recovering the device... I guess it's just down to bad luck?
mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Nope, never fixed it, I don't even have the device anymore (now rocking a Moto G Turbo)
mark1320 said:
I am just wondering if u managed to fix it.
Click to expand...
Click to collapse
Don't use "msm8974-download-manager" use qfil to recover the phone. Worked for me.
http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/
Download 2012 qhs diagnostic driver and use xp machine.It will work just fine.
install a fresh windows either x32/x64 winxp/win 7 extract color OS and install the correct drivers