Hi everyone,
Noob here, looking for some phone specific info. After extensive research I have not found exactly what I'm looking for thus the reason for this post. Thanks in advance.
I'm looking for help finding the safest, simplest, most reliable way to root my 959v. I want to root so that I can a) delete preloaded browser bookmarks b) delete preloaded bloatware c) file share with my PC over WIFI (with Samba?) and d) block pop up ads (adfree). I need to be able to undo this in case of a warranty issue and I don't want to lose any of the function of the phone (i.e. front face camera, contacts sync, wifi).
Couple questions: Will factory reset take care of the bloatware and bookmarks?
Also, has anyone found a way to put a 4g toggle switch icon, like the power bar that comes with the phone, or do I need a new ROM to do this, and what does everyone recommend as for an O.S. / ROM. Thanks!
Firmware: 2.2.1
Kernel: 2.6.32.9
Build: FROYO.VUVKD1
i would suggest you flash ravers odin kj6 rom. then flash drhonks kj1 kernel with odin too in order to root it. both go in pda section. then flash through cwm soma's simplysimple rom wich is debloated or just use titanium backup to remove bloat from your rooted stock kj6.
I consider myself pretty technical but I don't completely understand Roms and kernels. By flashing a ROM, are you changing the OS and/or GUI? Does it overwrite the old OS or just make an amendment to it? Will any old Roms be left taking up useless space in memory? What about kernels? Thanks,,
Joe
Flashing a new rom is like re-installing windows on a PC. you need to backup your data before you flash.
The best way to root, is to either use ODIN to flash a new kernel that already had root (doesn't replace the whole rom), or use the latest superoneclick to root. Rooting does not erase your data. Then you can use a program like titanium backup to remove bloatware.
check out the dev form, and look for the bible thread, there are links to roms and guides on how to safely flash your phone. You are going to have to read up a bit to become familiar with how this phone works.
good luck.
Normally, I follow FB's ext4 guide.
But since my phone has been UnBrickable Modded, I've made a kj6 Back-To-Stock One-Click. This oneclick will basically get your phone to where it would be if you got your phone new with kj6 preloaded. RaverX3X tested for me, so I know it works well. After you run the one-click, odin kj1 from drhonk or extract the zImage and Heimdall it to KERNEL and RECOVERY partitions.
If you run the One-Click a second time, you will also get the right bootloaders for GB.
What if I have the KD1? What is all this KJ6/KJ1 about? Do I have to find and manually reinstall drivers for my device? Does a ROM need to be compatible with a Kernel or vice versa? How do I know what ROMS/Kernels will work with my device?
Farlander said:
What if I have the KD1? What is all this KJ6/KJ1 about? Do I have to find and manually reinstall drivers for my device? Does a ROM need to be compatible with a Kernel or vice versa? How do I know what ROMS/Kernels will work with my device?
Click to expand...
Click to collapse
Well, KJ6 was just released (leaks and source).
KJ1 (kernel) was the last voodoo kernel that drhonk made.
There isn't a KJ6 voodoo kernel, yet.
KD1 is Froyo.
Drivers... If the drivers you have now work, then don't change them
The roms and kernels we are all talking about will work with your device, because they are modified leaks for your device.
Just don't go off flashing stuff from other device forums. That is stupid.
You're basically safe if you mix froyo kernels with froyo roms, and gingerbread kernels with gingerbread roms.
Ok thanks a lot that I can understand. I'll need to brush up on differences between gingerbraed vs. froyo, and whether or not ice cream sandwich is going to be worth the headache. I'm actually happy with the stock rom, it's just that I hate bloatware, and any spy programs, and I want total control over my file access, wifi file sharing, bookmarks/etc. So really all I need to do is root the phone, I was thinking of superoneclick, but I'm not sure the device is supported.
Okay. You NEED to READ. Really dont know if SuperOneClick works with our phone? Come on. Do some research first.
There's a lot of techno jargon babble out there I'm trying to sort through, I'm not 100% literate on everything smartphone yet. When you flash a new kernel, say, KJ6, what happens to your applications? In a windows system they would stop working, but their data files would still exist. Are programs unchanged, do they leave useless data files, or can they somehow be reactivated, like the installer package and the data are in the same folder, just need a little help filling in the blanks Thanks
I know how you feel, but there is not "do it just like this and you will get this result," because development has been fast and furious, even a little ad hoc. The Bible is useful to a point, but in the end you are just going to have to read and cautiously test. If you stick with stock KJ6, your phone should work as intended. If you move to a custom ROM, some things may be buggy and other things may work even better than stock. For instance, battery life is improved via a couple roms I have tried, but wifi (dynamic dhcp) suffers. You just have to proceeed CAUTIOUSLY. Tha's the best advice I can offer.
Farlander said:
There's a lot of techno jargon babble out there I'm trying to sort through, I'm not 100% literate on everything smartphone yet. When you flash a new kernel, say, KJ6, what happens to your applications? In a windows system they would stop working, but their data files would still exist. Are programs unchanged, do they leave useless data files, or can they somehow be reactivated, like the installer package and the data are in the same folder, just need a little help filling in the blanks Thanks
Click to expand...
Click to collapse
If you are looking to JUST ROOT your SGS4G then I would recommend SuperOneClick. Version 2.2 worked for me running stock 2.3.6.
I'm rooting my phone as we speak using superoneclick 1.6.5 shortfuse. I enabled usb debugging, download samsung drivers to pc, installed drivers to pc, then started superoneclick and plugged in the phone. Clicked rageagainstthecage, "ROOT", then after about 10 minutes my girlfriend called me, which I had to answer, only to find out that she was breaking up with me, then it got to the part where it says "running rageagainstthecage" and now it's basically frozen after 30 minutes, superoneclick icon saying "(Not Responding)" Great...
Update: No combination of rebooting and rageagainstthecage was compatible with my device/os/version of superoneclick. I used SuperOneClick 1.6.5, my OS is stock 2.2 froyo, and the with usb debugging enabled, it froze every time. Using psneuter, it worked ok, the superuser icon is there... so, for a test. I went to the browser, still cannot delete those annoying bookmarks. Ok, so now to try and delete some bloatware.... still cannot delete any factory installed programs. So, that seems a bit pointless, I'm going to play with wifi filesharing, file explorer, and see what I can access, will report back.
My ultimate goal is to have a fast as **** phone, complete functionality, no bloatware, all custom apps, I want to be able to shortucut ANYTHING to the desktop, especially a 4g toggle switch. How close am I? So far the phone runs a lot slower than before I rooted.
<< Another wierd glitch, when I went to the market without rebooting the phone first, the screen went black, it vibrated in sets of 3 pulses, and I had to hard power down to reset. Went back to market and problem did not reoccur>>
Ok so I installed Titanium Backup, umm yay now for some fun, started deleting everything that didn't look familiar including those pesky sec.android.acore.blahblahblah and now my phone does that 3 vibe thing and I have to reboot. Ok so next chore is reflashing the rom I guess....
Glad you got it working... ummm, sort of?
From what I understand about where you are, I would
1. Use odin 1.8.5 to flash KJ6 stock.
2. Let it reboot and do its thing for a bit (say, 5 minutes?)
3. Check to see if everything is working, stock--4g, wifi, browser, market etc.
4. Use SuperOneClick 2.2 (after setting usb debug in settings-->applications) to root. May take a few tense minutes, but it works. Least it did for me.
5. Load your titanium and uninstall stock apps as you desire.
6. Get a full charge and calibrate your battery.
7. Lust after the roms (especially the great looking 2.3.5 based one by Raverx3x) that require CWM, but cry over your fear of a no-stock recovery.
Should get you where you want to go.
Farlander said:
Ok so I installed Titanium Backup, umm yay now for some fun, started deleting everything that didn't look familiar including those pesky sec.android.acore.blahblahblah and now my phone does that 3 vibe thing and I have to reboot. Ok so next chore is reflashing the rom I guess....
Click to expand...
Click to collapse
Well, I'm officially the master of this sheeet box. DAAAAANG SKIIPPPY FOLKS I had a soft brick condition, didn't know what the f to do, started getting lost on google and good old you tube led me home, can you believe I was bout to cut my usb wire to make a jig no no no not necessary, just hold both volume button and plug in usb, it goes to download mode. Next I couldn't get odin to recognize the phone but eventually went straight to pc (not through my usb hub) and it popped up, I flased the zip of the closest thing I could find to my stock 2.2 froyo, now I have KB5, kernel 2.6.32.9 wtf wow it almost the same but noticeably different, the settings menu is different, it came pre-rooted, but video skype works perfectly and on front facing camera booyah
been fun fellas talk again soon
I am glad you are where you want to be, but DUDE! I assumed you knew how to get into download mode up vol+down vol+plug in usb. Jeeez! That's frickin' basic! Anyway, glad you're sailing. You should be able to Odin 2.3.6 and root it with SuperOneClick 2.2 now, if you want. I am still trying to get upo the nerve to load CWM and try Raverx3x's Octane. It's a downgrade from 2.3.6, but the screenshots look tasty!
Farlander said:
Well, I'm officially the master of this sheeet box. DAAAAANG SKIIPPPY FOLKS I had a soft brick condition, didn't know what the f to do, started getting lost on google and good old you tube led me home, can you believe I was bout to cut my usb wire to make a jig no no no not necessary, just hold both volume button and plug in usb, it goes to download mode. Next I couldn't get odin to recognize the phone but eventually went straight to pc (not through my usb hub) and it popped up, I flased the zip of the closest thing I could find to my stock 2.2 froyo, now I have KB5, kernel 2.6.32.9 wtf wow it almost the same but noticeably different, the settings menu is different, it came pre-rooted, but video skype works perfectly and on front facing camera booyah
been fun fellas talk again soon
Click to expand...
Click to collapse
Really wtf. Download phone drivers, Odin program, Ravers Odin Kj6 ROM and drhonk KJ1 kernel. You need nothing else.
SOC 2.x
How many times and in how many (slightly) different ways can one say the same damn thing? If he has flashed KJ6 already and wants to keep that kernel, then I still say SuperOneClick 2.2 will root his device. Am I wrong? Why do people keep using SOC 1.x then complain about not getting it to root their gb 2.3.6 successfully?
SOC 2.x...use it!
http://shortfuse.org/
chris31jct said:
Really wtf. Download phone drivers, Odin program, Ravers Odin Kj6 ROM and drhonk KJ1 kernel. You need nothing else.
Click to expand...
Click to collapse
I've been sitting on my stock Rogers Infuse 4G since I got it, hoping that they would at the very least release an update to ICS. I've pretty much given up all hope, especially now since the Infuse was listed as one of the "violators" in the recent lawsuit. So, in giving up there, I've started to try and get up to speed with what's available in terms of custom ROMs for the Infuse, etc...
I previously had a Captivate (seems like I pick the wrong phones) and have kept that one stock as well (now my wife's phone) aside from the official 2.3.3 update Samsung came out with for it. I checked in here once in a while to try and keep track of some of the updates as I thought about going for a custom rom, but I never had the balls to try anything (I've only ever flashed one phone in my life, and it was bought 2nd hand for $20 ) since I actually *must have* a working phone due to having a kid (daycare calls are kind of important!). However checking today, it seems like I am totally out of the loop and I just don't have the time to try and wade through thousands of pages on various threads to find out what the current "ways" are and such... but I know what I want to achieve so I'm hoping you folks are nice enough to at the very least give me a "search you noob" and point me to some threads :silly:
Since I'm totally stock, from what I'm gathering I think I need (and really I more of need a complete checklist of things to do rather than a "do it for me" kind of thing) to do is:
1) jot down my modem and apn settings and such (already done)
2) back up everything i need, pop out sd card (know how to do this)
3) wipe/clear to factory default (... and this)
4) back up the current rom - everything in case I want to return back to exactly the way the phone is stock
5) figure out what i need to do to flash CWM or something so I have the necessary recovery mode options?
6) flash to ICS (since from what I gather, I need to do that if I want to go to JB)?
7) follow instructions I found on the unnoficial CM10 JB thread to flash to JB
?) flash a new kernel? (is this done already during a rom flash; are there any new kernels?)
As commented, I can figure out 1-3 since I'm not stupid, but I have no idea what is even needed to do 4, nor do I know exactly all the tiny, necessary, steps to do the rest after that... especially since reading some things it seems like most of this is for AT&T users and since I'm on Rogers with a I997R (I assume the R means Rogers), I don't want to mess up my modem or other things to prevent the phone working for me... and these are the steps I'm hoping people can help me with.
So far, in prep, I've noted my phone info (basically everything in Phone settings) and I can back up all my apps and such that I care about, and I've downloaded the unofficial CM10 JB download and the Google apps apk as well, and on the same thread was a link to a 1-click ICS flash or something... so I got that too. Since I want to end up with JB, I'm not too concerned (or should I be?) with it being AT&T stuff to get to ICS, since it's the JB flash that I'd really want to ensure works for me.
Is anyone willing to help me out? I really wish I didn't have to be the "next loser" to make a thread like this but I just haven't had the time to be able to keep up with all the info going around (voodoo mods and whatever else?!) to be able to make sense of all this myself!
Thank you!
This looks like a good place for you to start
http://forum.xda-developers.com/showthread.php?t=1197248&highlight=how+to+root+rogers
First thing to do of course is read, read, read. Understanding what you are doing and why you are doing it is the most valuable resource you can have.
The gist of it is though: to install the custom updated roms, you need root. For Rogers infuse users that is very easy to do; all you have to do is install a rooted kernel in odin. After you do that you make a nandroid (and/or EFS) backup, and install whatever rom you want. CM9 and CM10 have their own kernel, so don't worry about that.
adfurgerson posted the step-by-step guide above me, although the links in the OP may be down. I have the mirrors here: http://minus.com/moAvVibed/
the 3 files in there are:
Odin_Infused_Gingerbread_Kernel_v1.zip - This is the rooted kernel you are flashing
Odin_Stock_Rogers_UXKG3_Kernel.zip - This is the stock rogers unrooted kernel if you want to unroot and go COMPLETELY stock for whatever reason (I doubt you will ever need to use this tbh)
Odin_UXKG3_rooted_no_bootloaders_v2.zip - The stock Rogers FIRMWARE. If you ever mess up you use this to "start from scratch". You will still be rooted though if you don't use the stock kernel above.
So yeah, just flash the kernel in odin as described in the above thread and you will have root + cwm.
From there you reboot into cwm (turn off, turn on holding vol+ and vol- buttons) and make a nandroid backup of your stock rogers rom (or an EFS backup with the infuse toolkit: click here), flash CM9 as per the instructions in the OP, and finally CM10 as per the instructions in the OP.
Also remember:
1. The infuse is almost impossible to hard brick. The only real way to do so is to improperly flash bootloaders, which a rogers infuse user will never have to do. Only AT&T users coming from Froyo have to do it. So keep that in mind.
2. On the chance that you get soft-bricked (screen won't go past samsung logo for example) you can always go back to flashing the stock rom/rooted kernel again in odin and start all over again.
The only thing that I can add to Threi's excellent reply is to mention the one click to ICS. It is in the first post of Scott's CM10 thread,it should give you the ICS recovery that is needed to flash JB without flashing a full ICS ROM.
I suppose I should have mentioned that I also have rooted my phone already (used SuperOneClick, worked fine). Is there any reason why I would use that "rooted kernel" versus just having root on my phone (ie, having su installed... dunno what else it did, I don't think it did anything to my kernel)?
I guess my biggest unknown is all the backup processes that can be done and how to do them? Is "nandroid" a one stop shop for doing backups of everything? Although there's the complete stock Rogers rom linked above (which I'll nab anyways!), I was thinking I would try to make a complete copy of my own phone (just in case)... I guess next step is to search for "nanroid"
Are there any other backup tools I could use/check out (not apk backup tools... those are easily located in the app store, or performed with adb myself).
j.smith said:
I suppose I should have mentioned that I also have rooted my phone already (used SuperOneClick, worked fine). Is there any reason why I would use that "rooted kernel" versus just having root on my phone (ie, having su installed... dunno what else it did, I don't think it did anything to my kernel)?
I guess my biggest unknown is all the backup processes that can be done and how to do them? Is "nandroid" a one stop shop for doing backups of everything? Although there's the complete stock Rogers rom linked above (which I'll nab anyways!), I was thinking I would try to make a complete copy of my own phone (just in case)... I guess next step is to search for "nanroid"
Are there any other backup tools I could use/check out (not apk backup tools... those are easily located in the app store, or performed with adb myself).
Click to expand...
Click to collapse
Flashing a kernel is how you obtain cwm which allows you to flash custom ROMs(cwm is clockwork mod recovery). A nandroid is a backup you create in cwm that is copy of your phone that will return your phone to the exact state it was at the time backup was made.
adfurgerson said:
Flashing a kernel is how you obtain cwm which allows you to flash custom ROMs(cwm is clockwork mod recovery). A nandroid is a backup you create in cwm that is copy of your phone that will return your phone to the exact state it was at the time backup was made.
Click to expand...
Click to collapse
Aha, perfect description. I didn't realize I had to get a new kernel to have CWM... and I'm guessing because of signing and such, that a custom kernel (with CWM) is required in order to flash a non-signed rom, which is why you couldn't just do it on stock, right?
Ok, so now armed with that info that clears up a lot, I guess I have just one question left (which I can probably find the answer to with some searching). I have read what that voodoo lagfix is and is this something that is standard now on all kernels (because if it can cause issues, I'd rather just have a kernel without it)? Are there any "rooted" kernels without the lagfix built in so I don't have to remember about disabling the lagfix? ...or is there a way to install CWM on to my current kernel?
*edit* Ok, I realize I might be a bit too picky about the voodoo lagfix thing. I found two good threads on dealing with Rogers specifically, so I'll read over those (and suck it up about voodoo) and see how it goes. Since my vacation got unfortunately cancelled due to a sick kid, I have some time to experiment this weekend... hopefully ending up with JB on my phone!
Glad to see your on you're on the way to JB. After you install a custom kernel be sure to make a nandroid in the backup and restore option of CWM before you flash a ROM. That is like your safety net, if you wiped everything and had a bad download that wouldn't install, you will have a nandroid to restore.
adfurgerson said:
Glad to see your on you're on the way to JB. After you install a custom kernel be sure to make a nandroid in the backup and restore option of CWM before you flash a ROM. That is like your safety net, if you wiped everything and had a bad download that wouldn't install, you will have a nandroid to restore.
Click to expand...
Click to collapse
Yep, just flashed the rooted cwm kernel and performed a backup. I read somewhere that you can/should back up your efs in case you lose your imei... so I'm just going to quickly look in to that, then i wipe and do some flashes to jb... shouldn't take long hopefully!
Ok, I seem to be stuck at trying to get the one-click ICS install to work. I've got the EZUpdater package to ensure I have the right drivers, yet everything I try with the one-click seems to tell me that the drivers aren't installed and then launches an installer which also doesn't seem to detect the phone... yet EZUpdater will run fine, etc...
I'm just about to reboot and launch device driver in a mode to list all hidden/previously installed devices and nuke them from history to hopefully purge my system of all traces of any drivers and install EZUpdater one more time to get the drivers installed.
Any reason why my phone wouldn't show up in this one-click (it uses heimdall or whatever) program, but seems to work in most everything else (adb even runs fine)?
*edit*
Got it all working! I couldn't get the one-click ICS to work for the life of me... it just didn't see the drivers even though they were there and working. I guessed maybe it had to do with me running Windows 7 x64 and having x64 drivers, but the one-click maybe being 32bit. I even tried installing the x64 Java JRE but didn't seem to make any difference.
I ended up having to flash CM9 which worked fine, then going to CM10. Had no issues doing that... wish I had just tried that before since that one-click wasted hours of my day and got me somewhat frustrated!
Hi all...
OK, so I've rooted and ROMed a few phones in the past, and I generally know what I'm doing. However, I think I may have gotten a little bit overconfident this time and not done enough research...
I had a friend give me one of these phones and I decided that before making it my daily driver, I was going to install CM11. The phone was given to me unrooted with the stock 4.3 ROM. So, I found a guide to root the 4.3 version of the phone w/o triggering the warranty killbit, and that all went well. Once rooted, I decided to use Clockwork ROM Manager to throw CM11 on it. I installed CM and, without giving it a second thought, told it to flash the latest CM recovery (apparently my root method had come with TWRP). When I rebooted, I expected to see the nice recovery screen I was used to, but instead I was informed that I needed to take my phone to the nearest Verizon store and have them restore it (no thanks). I can, however, still get in to the Odin downloader, but this is uncharted territory for me. Assuming everything is OK with my firmware, what is the best/fastest way to recover from this point? I think I understand how Odin works, but I don't know much about it. Can I use Odin to flash the latest TWRP and fix it that way? Would it be better to try and flash completely back to stock and start over? If I'm forced to use Odin anyway, can I just flash CM11 from there? I have no idea what to do...
I would greatly appreciate any guidance anyone of you ROM wizards is willing to part with...
Fix with this:
http://forum.xda-developers.com/showthread.php?t=2586319
Then read all of this, no AOSP on 4.3:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my HTC6525LVW using Tapatalk