Hi
Just got a nexus s today, but when i have the phone flat and turn it from portrait to landscape, the phone doesnt change the image from portrait to landscape, only turns when i pick it up, and the phone has to be at a angle of 45 degrees of greater then will it turn. Is there any reason for this?
Yes gravity
As far as I understand you are talking about spinning your phone around when its laying flat on let's say a table. There is no way for the motion sensor to know what is portrait and what is landscape unless you pick it up and hold it vertically aligned to the earth's gravity. The sensors are based on that. So they can't tell which side of the table you're standing at to be able to position the screen and the sensors leave the orientation at the last position it was. If you know what I mean.
So you must lift (tilt) the phone off the table at least 45 degrees to change the orientation and then you can lay it flat again.
Accelerometer direction is relative? It doesn't know where you are in proportion to the phone (lying down, sitting upright, on monkey bars, etc). The general idea is that you hold it as if you were standing upright using it, then rotate as necessary. If you then lay it flat it will stay how you just told it.
edit: beat me to it obsanity
Harbb said:
edit: beat me to it obsanity
Click to expand...
Click to collapse
Hehe... that was a first for me on a question like that. Never thought someone might not know how that works.
Same here. Took some thinking to be able to describe something that feels natural to me.
Harbb said:
Same here. Took some thinking to be able to describe something that feels natural to me.
Click to expand...
Click to collapse
I just thought of something. If you lay the phone on the table flat in landscape while the phone is displaying portrait and spin the table around, assuming the phone doesn't slide off the table, with certain cylindrical force grater than earth's gravity, you should be able to observe it switch to landscape without the need of picking it up.
Just a 2nd option in case the first one was too hard
You make a valid point, but that assumes the accelerometer is what handles all rotation - the nexus also has a gyroscope which probably gets factored in. Can't trick it now can you?
The phones will become self aware soon..
Actually I think it will still trick it since the gyroscope (if factored in) does account for motion. I think I'll test this since now I'm curious
After a good 5 minutes spinning my phone like a madman over my bed.. it confuses the hell out of the camera (something which rotates regardless of the autorotate setting), but cannot budge an app such as the browser (which won't autorotate if the setting is switched off).
Damn thing knows more about where it is than i do.
you could try and spin it like a top and try to get one side to flip up then land flat on the table again, that could trick it. be a good youtube video haha
Related
I had this feature with my TP2, and used it a lot.
Is there any mod of some sort I can install on my EVO 4G to allow the speakerphone to automatically activate when the phone is facedown?
I'm sure others would be interested in this as well.
Thanks!
yea there definitely is because it worked like that on the hero, someone will make it happen hopefully
I did not know that about the Hero!
Hopefully some awsome members here at xda could port that mod/app to the Evo sometime soon...
bump!
I'm curious to know if anyone else has heard anything about re-instating this feature on the EVO 4G!
Thanks
I would def use it
-------------------------------------
Sent via the XDA Tapatalk App
Me too why would they remove features out of sense?
i'm interested in this too, loved it on my tp2
it's 3am, in my bed, talking to someone (doesn't matter to who, that's not the point here). i flip to my side, incidentally making my phone's orientation matching the criteria - facing down, out the blue now i'm on speaker (!)... lol, not that i'd be doing this but this is one case where this "feature" would be more of a "bug"
frifox said:
it's 3am, in my bed, talking to someone (doesn't matter to who, that's not the point here). i flip to my side, incidentally making my phone's orientation matching the criteria - facing down, out the blue now i'm on speaker (!)... lol, not that i'd be doing this but this is one case where this "feature" would be more of a "bug"
Click to expand...
Click to collapse
I'd imagine you could code it not to look for a certain orientation, but to look for a rate of change of the Z axis that would indicate that it suddenly stopped face down on a surface. If it is coded like that, in your scenario you would only trigger it if you brought it off your face than slapped yourself with the phone. The impulse you get from a hard object is much different from a soft object and I imagine that for most people, they're talking about tables and counter tops here which are much harder than your face.
Minjin said:
I'd imagine you could code it not to look for a certain orientation, but to look for a rate of change of the Z axis that would indicate that it suddenly stopped face down on a surface. If it is coded like that, in your scenario you would only trigger it if you brought it off your face than slapped yourself with the phone. The impulse you get from a hard object is much different from a soft object and I imagine that for most people, they're talking about tables and counter tops here which are much harder than your face.
Click to expand...
Click to collapse
It would be based off of the proximity sensor.
use flipit in the android market, works pretty good
zeeyo987 said:
use flipit in the android market, works pretty good
Click to expand...
Click to collapse
+1 on this. Works just like the TP2 did
+2 so far works awesome, just like the TP2
Awesome! +3 Just what I wanted.
does anyone know if there is a way to hang up without turning the screen back on? Sometimes when driving and talking on the speakerphone its such a pain to wake the screen and then press end. Sometimes the other end hangs up and i end up pressing a button on the home screen instead. annoying not having a hard button for hanging up!
Hey, yes you read it correctly, mirror the screen!
i was thinking the other night as i was driving back from a concert with my phone standing against the spedometer, as i passed a speed bump, it fell flat behind the steering wheel, and in the front window of the car i could perfectly see the navigation software, only, it was mirrored if i place it better.
this got me thinking, is there a way or an app that lets you mirror the screen?
like width "-100%" height "100%".
this way my phone can lay flat in front of the spedometer at night, and so can get an OSD Navigation on my front window
this seems like an extremely safe way, cause it isn't to bright, and you can see the road an the navigation at the same time!
anyone know where to get an app or hack for this?
I love that idea
Sent from my ADR6300 using XDA App
greeeeat idea...! I have a slot on my car to put the phone layed up to the rear glass and alredy thinked about someone could make screen inverted...
will try it out!
Hi, guys, have you noticed that if the right side of the sliding mechanism is slightly nudged, the display lights up? Here is a video:
http://www.youtube.com/watch?v=XNQ1nK3cutY
When answering, please share what phone and keyboard layout do you have.
Same problem with me.. (link)
Personally, I don't like the capacitive buttons.. and I'm becoming increasingly annoyed with the search button!
Also, I don't know if anyone else has this problem..
If my keyboard is slightly moved/nudged, it wakes the phone up. See video..
http://www.twitvid.com/CHP21
Click to expand...
Click to collapse
Oh, that's a relief, I thought I was the only one
Well, that's not a big problem, even if the phone is waked up, it's still locked and goes to sleep again in 3-4 seconds.
This is weird!
Mine's display light up after I slide it past the bottom keyboard row, it can stay locked while I can clearly see the spacebar!
How can the same device act differently like that? mine is a 7 Pro (not an Arrive), and I can see from your video that yours is a 7 Pro too.
hassanselim0 said:
This is weird!
Mine's display light up after I slide it past the bottom keyboard row, it can stay locked while I can clearly see the spacebar!
How can the same device act differently like that? mine is a 7 Pro (not an Arrive), and I can see from your video that yours is a 7 Pro too.
Click to expand...
Click to collapse
If I push the sliding mechanism evenly, with two fingers, mine also lights up after the first row of the keyboard, just like yours. But try to push only the right side...
The screen is triggered based on a magnet I believe. So the amount that the screen must be moved to trigger the screen to come on isn't a precise thing.
Doesn't happen on my Arrive.
Hey, folks, do your phones light up when you divide the two halves?
http://www.youtube.com/watch?v=Yc6zNYu-La8
Please write what phone do you have - HTC Arrive, HTC 7 Pro, QWERTY or QWERTZ kejboard.
Mine doesn't light up if I nudge the right or left side. It also does not light up If split it in half like the above video.
It only lights up when I slide it over the first row of keys.
tiny17 said:
The screen is triggered based on a magnet I believe. So the amount that the screen must be moved to trigger the screen to come on isn't a precise thing.
Click to expand...
Click to collapse
This is correct.
I don't have the manual for that phone. (it's similar to the mechanism shown for the TyTn however www.mikechannon.net or see here to get the general idea http://forum.xda-developers.com/showpost.php?p=2677085&postcount=3 ) HTC tightened their document security and it's almost impossible to get Service Manuals current devices these days.
However, as tiny17 commented, in HTC phones, the sliding keyboard activates "wake-up" by means of a small magnet which is glued onto the inside of the casing. As this moves past the magnet operated switch it wakes up the phone. You will see similar behaviour if you bring a magnet near certain parts of the case and in fact this is a way to locate where the magnet switch is located.
Also, using phone cases that have magnet clasps on them can also operate the switch and wake up the phone when sliding it in and out of the case/pouch.
So technically this is not a fault, but it can be annoying.
Mike
Ok I have to say this is getting to me, frustrating as hell. My phones camera REFUSES to focus on ANYTHING (refuses to focus as in re-focuses an infinite number of times and never stops unless moved back quite a distance) that is within half a foot of it & if its set on auto focus it sometimes just completely blacks out everything except the item its set on. & if focused on a white screen you can't see anything except a white screen...no paragraph the size of the Titanic no nothing. Is this some sort of defect? Also on the bottom of the screen when taking pictures you can notice when you move it up and down theres this one little line looking thing that when that area is on something its practically blurred from view, is this the lens stuff I keep hearing about that you need to peel off of the camera?
(refuses to focus as in re-focuses an infinite number of times and never stops unless moved back quite a distance)
What do I do and whats wrong with it?
S1L3nTShaDoWz said:
Ok I have to say this is getting to me, frustrating as hell. My phones camera REFUSES to focus on ANYTHING (refuses to focus as in re-focuses an infinite number of times and never stops unless moved back quite a distance) that is within half a foot of it & if its set on auto focus it sometimes just completely blacks out everything except the item its set on. & if focused on a white screen you can't see anything except a white screen...no paragraph the size of the Titanic no nothing. Is this some sort of defect? Also on the bottom of the screen when taking pictures you can notice when you move it up and down theres this one little line looking thing that when that area is on something its practically blurred from view, is this the lens stuff I keep hearing about that you need to peel off of the camera?
(refuses to focus as in re-focuses an infinite number of times and never stops unless moved back quite a distance)
What do I do and whats wrong with it?
Click to expand...
Click to collapse
Does the camera look distorted or foggy on the back? If you try to wipe it off the fog won't go away. If so it is the film and you need to get it off.
Options:
1) qtip and rubbing alcohol
2) qtip and toothpaste
3) Mr clean magic eraser
4) scrape it off with your fingernail
5) use your htc advantage replacement to get a new phone and hope it doesn't have a defect.
Either one of those should work.
Sent from my HTC6525LVW using Tapatalk
I just recently gotten my Zenfone 6 and I've noticed that the flip-up camera has some play when touching it or placing it on a table. Every time it touches something it makes a very faint click sound. I'm wondering if this is normal or if only my smartphone has this issue.
Yeah, this is normal. The hinge moves a bit but it doesn't affect its durability. If you can stand this type of movement in a phone, you will kinda get used to it after a while.
I've noticed this as well, especially after I've had in a loose fitting pocket and it can swing around a bit while walking. There is a retract camera icon on the tool shade, tap this and it will tighten it up again.
Sent from my ASUS_I01WDX using Tapatalk
^^ What they said. It seems to be normal until Asus states it isn't. Seems to be fine and isn't causing any issues other than my own "Whatwasthat!?" whenever I hear some kind of noise from the phone when putting it down or anything.
I did just find out that dropping the phone outside in a parking lot and catching it about 3" from the ground can cause the camera to go from closed to slightly open. Assuming the inertia of my grabbing the phone during the fall snapped it open a bit. The phone gave me an alert saying I should not try to force the camera open, and clicking the retract camera icon put it back where it should be (flips like normal).
Glad to hear it isn't just mine. So far the only thing I would knock this phone for is that wiggle, that causes a rattle when vibrating, setting it down or a sharp tap on the screen. Otherwise couldn't be happier with the beast.
ASUS's employees told that having a lock or braking mechanism would decrease lifespan of a hinge and could eventually break. If they say that those movements are safer that tight positioning I can handle that.
aleksander002 said:
ASUS's employees told that having a lock or braking mechanism would decrease lifespan of a hinge and could eventually break. If they say that those movements are safer that tight positioning I can handle that.
Click to expand...
Click to collapse
Yep same here, minor issue, however it is good to get it out there. I'm sure for some that would bother them more than say you or I.
On a side note, I was looking through the settings and saw the flip camera calibration, went ahead and calibrated it and it definitely seemed to tighten it up a bit atm.
According to some posts on reddit, using the calibration tool fixes/improves the problem.