Which is the best battery-saving app 2012?
Mugen power
Sent from my GT-S5660 using xda premium
Hi,
In my little experience, there is no software that makes alot of diference, normaly what i do is:
disable motion
insert *#9900# and disable Fast dormacy - check is your network needs this
disable sync for accounts
disable GPS
disable wifi gps
disable wifi when not using
set brightness level to auto
set wifi sleep policy to when pluged in
Of course there are a couple more things you could do, and again this is what i do cant say it will work as good for you.
rooting.
Tasker
With it one can automate almost everything on the phone.
It's almost like programming i use it all the time and there are a lot of examples on this forum. http://forum.xda-developers.com/showthread.php?t=1110775
Juice Defender Ultimate + Battery Saver Pro (by Antutu).
I tryed a few battery saver apps but no longer use them as i found if i turn auto sync off, change wifi sleep policy to never, untick network notification, and use task manger frequently to kill unused apps my battery lasts a lot longer. I also use easy task killer and set it to kill all apps every 30 mins. im using king cobra v1.1 for evo 3d gsm and the battery life is amazing!! just swapping battery's over now and its nearly 9pm!!
If any one needs any help rooting or unrooting the evo 3d gsm hboot 1.4.9.0018 let me know as i have done it a few times now. I unrooted my phone back to ***locked*** s-on with no traces of rooting, then checked for ota updates, wouldnt of installed them tho even if there was one!! then downgraded back too 1.4.9.0007 and rooted it again with revolutionary.
---------- Post added at 09:22 PM ---------- Previous post was at 09:05 PM ----------
forgot to mention auto brightness is a must. and i also calibrate battery after installing roms . can anyone please tell me if calibrating the battery every time it gets to 100% is good or bad? thanks.
When you use an xperia mini pro like me, with just 970 mAh, you get to try all possible battery savers... and unfortunetly no one of them makes the exception... actually as said evilchild, they don't make difference...
just disable everything that may drain your battery, your launcher effects too can be in cause, get rid of unuseful apps, put your brightness to lowest levels or just get it to auto if your rom use it... choose the best profile for your CPU... and with this you are good for 10 new hours in your daily battery life.
I'm not sure a 'battery-saving' app is real.
They just disable some features that we can manually do that. They just make it automatically disabled.
But, 2x Battery is good. It could disable Wifi or mobile data while the display is off.
one touch battery saver is awesome. create a widget to enable/disable wifi,gps,sync,brightness,bt,data ect with one touch!. free on google play
lonestrider said:
I'm not sure a 'battery-saving' app is real.
They just disable some features that we can manually do that. They just make it automatically disabled.
Click to expand...
Click to collapse
+1
SmXtrem said:
+1
Click to expand...
Click to collapse
Yeah. There's a thread somewhere which gives real battery saving tips
I tried some apps, but I didn't found one which really improved the battery.
In my opinion the best method is to reduce the brightness.
juice
Juice Defender Ultimate + Battery Saver Pro
lonestrider said:
I'm not sure a 'battery-saving' app is real.
They just disable some features that we can manually do that. They just make it automatically disabled.
Click to expand...
Click to collapse
+1
From the apps I tried out and used, almost all of them just disabled certain things, or tweaked settings that I could have done on my own, and eventually did do.
I found it easier to just go on a sub forum for the phone I had at the time and look up tweaks, tips etc.. I'd say doing this helped me more than any app I found previously, and was easy to do.
Dolphin companion is good and gives more remaining of time.
I use juice defender and the setting: "Only 2G"
3G takes a lot of battery..
Matheus-007 said:
Juice Defender Ultimate + Battery Saver Pro (by Antutu).
Click to expand...
Click to collapse
i try yah friend.. i use script exacly but not best i think... thanks..
Sent from my GT-S5660 using xda premium
None. There are no working saving battery apps, not a single one.
What a battery saving application can do is to change the phone configuration to a lower energy one, just like lowing brightness, disabling data packages and such, to sum up, things you can do by yourself and you'll save the battery that that application consumes.
The best way to save battery is to make a proper use of your phone:
-Disable gps when you don't need it.
-Turn off bluetooth when not needed.
-Keep screen brightness low at all time.
-Disable data packages before going to sleep and enable them again when you wake up.
-Keep your phone clean by periodically uninstalling apps that you don't use anymore and that make unnecesary use of memory, cpu and battery energy.
-Check your battery use statistics and keep an eye on applications that are using energy unefficiently, and replace them with better alternatives. Facebook and facebook messenger are clear examples.
-Some people say that connecting to 2G networks instead of 3G helps as well.
-Activate wifi at home, it seems to eat less battery than connected to 3G.
There are more tips out there, just gogle it and make a responsible use of your phone. Keeping phone clean and lowing brightness will probably make the biggest difference.
Moreover, if android S.O. is on the top of the list of battery use, your phone's software entered a weird condition. Reboot it and if it persist, consider a factory reset.
I hope this helps
I just started evaluating Juice Defender Ultimate to see if it can save battery life, but there are many options that I don't fully understand. I have attached a screenshot of the Notificatin pulldown window from my Galaxy Nexus which shows the JD status. There are 9 objects just to the right of the JD shield. They include 3 icons, 3 colored circles and 3 lines of text. Can anyone explain what each of them mean? I have checked the JD online info, without luck.
My best guess is:
the up/down icon represents mobile data
the red circle next to the up/down icon means mobile data is disabled
the radiation icon represents WiFi
the green circle next to the radiation icon means WiFi is enabled
the 3G icon represents 3g mode
the red circle next to the 3g icon means 3g is disabled and 2g is enabled
As mentioned, these are just my best guesses. I have no idea what the 3 lines of text mean?
Pete
Hey guys so I know there are a few things that can improve battery life and some things that are supposed to help but may be a mith? Things as only draining battery to 10% and charging to 90% or something like this. What are tips that help? Also if you guys have changed your cpu settings that really improved the battery life let us know!
I drained my battery down to 0% after the second time I used it and it pushed my battery up from 3:30 to 5:30. I also use batterybar to see the stats and whatnot. Another thing you can do is go into power options in the Control Panel and change the plan settings > advance power settings. I usually change the Processor power management settings and the Intel Graphics Settings.
Kraize said:
I drained my battery down to 0% after the second time I used it and it pushed my battery up from 3:30 to 5:30. I also use batterybar to see the stats and whatnot. Another thing you can do is go into power options in the Control Panel and change the plan settings > advance power settings. I usually change the Processor power management settings and the Intel Graphics Settings.
Click to expand...
Click to collapse
do you ever charge it to 100%
Does leaving it on the charger like when playing a game or something matter? Does it stop charging once it reaches 100
AFAIK, leaving it on the charger shouldn't matter. It's a smart charger. I always charge it to 100%, but never go lower than 10%. I try to recharge around 15%.
Best thing I've done is disable my bluetooth since I have no devices that use it.
Second is lower the brightness while on battery.
I'm getting around 5:30 of battery life doing things like browsing, email, news reading, and using Autodesk Sketchbook Design.
Disable automatic brightness. Change the screen timeout to the lowest value that works for you. Turn off BT. Turn off live tiles and notifications for apps you don't need to update on your main screen and lock screen. Run the troubleshooter for power and see if you can deal with what it changes.
Hey everyone, first I'm not really sure if this belongs in a Tasker forums. Seeing as I use a N5, I figured it could also go here. Anyway, I've been having some problems with Npl wakelocks. I downloaded wakelock terminator with xposed and it seemed to have helped, however something didn't seem right as my battery was draining the same amount as when the wakelocks were happening. The only time I wasn't having the drain was when location was set to device only, which makes sense.
I'm completely new to tasker. I've watched a few tutorials and I've messed around with it a bit but with not much luck. I wanted to do one of two things. Either have location set to battery saver/high accuracy when the screen is on, and have it set to device only when the screen is off. Another option is to have it set to battery saver/high accuracy when google now/maps is open and device only the rest of the time. I feel like this shouldn't be that hard but I messed around with it and got no where. Anyway, what are your guys' opinion about this strategy and would anyone be able to help me with implementing these tasks. Thanks!
I wouldn't go the route of using tasker for your problem. And I would ditch that xposed module for wakelocks too. I run rooted with xposed on high accuracy at all times. My battery life is great. You need to find the source of your battery drain and eliminate it. Don't look for a bandaid fix using tasker. My guess is you have some rogue app killing your battery. Give us a list of all your apps, or delete them all, and install them one by one to track down the culprit. Also, are you running stock Rom and kernel? What other mods do you have?
Lokke9191 said:
I wouldn't go the route of using tasker for your problem. And I would ditch that xposed module for wakelocks too. I run rooted with xposed on high accuracy at all times. My battery life is great. You need to find the source of your battery drain and eliminate it. Don't look for a bandaid fix using tasker. My guess is you have some rogue app killing your battery. Give us a list of all your apps, or delete them all, and install them one by one to track down the culprit. Also, are you running stock Rom and kernel? What other mods do you have?
Click to expand...
Click to collapse
I can run the phone as normal today with location and everything on and post my BBS log after. Basically, when I'm at home the battery is great. However, ever since updating to the new google search app I've been having extreme wakelocks from the Npl whenever I would leave my house. Which is why I found a thread on xda that was talking about that exact wakelock. You're right though. I'm going to get rid of the app because it seemed weird. The wakelocks weren't showing up on BBS but I feel like it didn't get rid of them. Who knows though, maybe you're right and it is something else that's draining the battery which is why the wakelock app didn't help.
Anyway, I'm running stock ROM/kernel with xposed. I use greenify module, appOpsX, snapshare, gravity box, and gesture navigation module. With gravity box I just use custom quick settings, smaller nav bars, some status bar mods like the day and double tap to sleep. However, again I have had the same GB mods since before the drain. I use a pebble however I've never had a drain from that and I've been using it since Dec. Most of my apps are greenified including facebook, instagram, as well as all my music streaming apps. A lot of the google services I don't use are disabled like books/magazines/movies. I have snapchat, but I don't use it too much, and facebook messenger that I don't greenify. When I check GSam stats though, android system and kernel take the most battery, followed by music players if I was streaming music that day. The rest of the apps are way down the list.
I posted in the battery thread asking if anyone had the same problem with the wakelocks after having the latest google play services. I noticed mine is still 4.3 for some reason so I might just update manually from androidpolice and see if theres a difference. But yeah, I will keep this updated with todays logs.
Try this. Use titanium backup to uninstall Google play services and Google search. Then launch maps, and reinstall both from the play store.
PsychDrummer said:
Another option is to have it set to battery saver/high accuracy when google now/maps is open and device only the rest of the time.
Click to expand...
Click to collapse
This is what I ended up doing. You will need the secure settings plugin for tasker.
Set up a new profile for application "Maps".
When on, launch task GPS On (Secure settings, configuration GPS enabled)
Exit task, launch task GPS On (Secure settings, configuration GPS disabled)
I used the app factory to create an app for this, and use that on my N5 and my second phone too. Works great. Enables GPS when I launch Maps for navigation, and switches to battery saving when I exit Maps
PsychDrummer said:
I can run the phone as normal today with location and everything on and post my BBS log after. Basically, when I'm at home the battery is great. However, ever since updating to the new google search app I've been having extreme wakelocks from the Npl whenever I would leave my house. Which is why I found a thread on xda that was talking about that exact wakelock. You're right though. I'm going to get rid of the app because it seemed weird. The wakelocks weren't showing up on BBS but I feel like it didn't get rid of them. Who knows though, maybe you're right and it is something else that's draining the battery which is why the wakelock app didn't help.
Anyway, I'm running stock ROM/kernel with xposed. I use greenify module, appOpsX, snapshare, gravity box, and gesture navigation module. With gravity box I just use custom quick settings, smaller nav bars, some status bar mods like the day and double tap to sleep. However, again I have had the same GB mods since before the drain. I use a pebble however I've never had a drain from that and I've been using it since Dec. Most of my apps are greenified including facebook, instagram, as well as all my music streaming apps. A lot of the google services I don't use are disabled like books/magazines/movies. I have snapchat, but I don't use it too much, and facebook messenger that I don't greenify. When I check GSam stats though, android system and kernel take the most battery, followed by music players if I was streaming music that day. The rest of the apps are way down the list.
I posted in the battery thread asking if anyone had the same problem with the wakelocks after having the latest google play services. I noticed mine is still 4.3 for some reason so I might just update manually from androidpolice and see if theres a difference. But yeah, I will keep this updated with todays logs.
Click to expand...
Click to collapse
Just run device only all the time, like everyone else does. It's a problem with Google's code, and the same bad coding is clearly seen throughout their entire app lineup.
Lokke9191 said:
Try this. Use titanium backup to uninstall Google play services and Google search. Then launch maps, and reinstall both from the play store.
Click to expand...
Click to collapse
What would that do though?
jj14 said:
This is what I ended up doing. You will need the secure settings plugin for tasker.
Set up a new profile for application "Maps".
When on, launch task GPS On (Secure settings, configuration GPS enabled)
Exit task, launch task GPS On (Secure settings, configuration GPS disabled)
I used the app factory to create an app for this, and use that on my N5 and my second phone too. Works great. Enables GPS when I launch Maps for navigation, and switches to battery saving when I exit Maps
Click to expand...
Click to collapse
Thanks! So, how would I set this up using device only/high accuracy? I'm also super new to tasker so if you don't mind I might PM you asking for help.
Aerowinder said:
Just run device only all the time, like everyone else does. It's a problem with Google's code, and the same bad coding is clearly seen throughout their entire app lineup.
Click to expand...
Click to collapse
Well, I actually like to use maps and google now. However, I don't actually need the location on when I'm not using either of the two services which is why I wanted to setup tasker.
It'll change them from being system apps to user apps. This has solved nlp wakelocks for many others experiencing the same problems.
PsychDrummer said:
Thanks! So, how would I set this up using device only/high accuracy? I'm also super new to tasker so if you don't mind I might PM you asking for help.
Click to expand...
Click to collapse
Sure.
It isn't that hard - install the secure settings plug in first, and when prompted, give it Superuser access. Then, create a new profile in tasker - call it whatever you want. Set up the profile for the application "Maps"
When Maps is launched, set it up to fire a new task (I called it GPS On) - this task just enables the GPS setting in the secure settings (under third party plugins)
GPS on -> high accuracy
GPS off -> battery saving mode
Set up an exit task (I called it GPS Off) - this turns the GPS settings in the secure settings off.
I can send you the apk if you want (but you don't really know me, so you probably shouldn't use an apk from a stranger! lol!), or you can try to import this attached xml into tasker (rename the file to remove the .txt extension - filename will be AutoGPS.prj.xml) - the xml option should be safe.
I haven't tried importing an xml, but it should be fairly straightforward (Save profiles in /sdcard/tasker/profiles and then, in tasker, long press the profiles "tab" and "import"). Before doing this, backup your existing profiles in tasker, just in case. Also, make sure you have secure settings set up before you import this.
jj14 said:
Sure.
It isn't that hard - install the secure settings plug in first, and when prompted, give it Superuser access. Then, create a new profile in tasker - call it whatever you want. Set up the profile for the application "Maps"
When Maps is launched, set it up to fire a new task (I called it GPS On) - this task just enables the GPS setting in the secure settings (under third party plugins)
GPS on -> high accuracy
GPS off -> battery saving mode
Set up an exit task (I called it GPS Off) - this turns the GPS settings in the secure settings off.
I can send you the apk if you want (but you don't really know me, so you probably shouldn't use an apk from a stranger! lol!), or you can try to import this attached xml into tasker (rename the file to remove the .txt extension - filename will be AutoGPS.prj.xml) - the xml option should be safe.
I haven't tried importing an xml, but it should be fairly straightforward (Save profiles in /sdcard/tasker/profiles and then, in tasker, long press the profiles "tab" and "import"). Before doing this, backup your existing profiles in tasker, just in case. Also, make sure you have secure settings set up before you import this.
Click to expand...
Click to collapse
Cool, thanks I will give it a try. And it would be the same if I want to have location on when using google search/now?
PsychDrummer said:
Cool, thanks I will give it a try. And it would be the same if I want to have location on when using google search/now?
Click to expand...
Click to collapse
Yes, it should be. But in my experience, I haven't found Google Search/Now really requiring high accuracy GPS level location for any of the features yet. It gets by fine with just battery saving mode. So, I only enabled this for the Maps application.
Actually, now that I think about it, I don't know how you'd enable it for Google Now - since it runs in the background to notify you about upcoming events. Since you aren't launching Google Now most of the times, I don't know how you'd set up Tasker to enable the high accuracy GPS for that (and it is possible that Google now using active GPS may be part of the battery drain issue - I don't know for sure)
jj14 said:
Yes, it should be. But in my experience, I haven't found Google Search/Now really requiring high accuracy GPS level location for any of the features yet. It gets by fine with just battery saving mode. So, I only enabled this for the Maps application.
Actually, now that I think about it, I don't know how you'd enable it for Google Now - since it runs in the background to notify you about upcoming events. Since you aren't launching Google Now most of the times, I don't know how you'd set up Tasker to enable the high accuracy GPS for that (and it is possible that Google now using active GPS may be part of the battery drain issue - I don't know for sure)
Click to expand...
Click to collapse
I actually wanted to keep the device on "device only" location instead of battery saving. For Google now I wanted the traffic card, but I would only need it if I physically open google now. I don't really need the notification.
PsychDrummer said:
I actually wanted to keep the device on "device only" location instead of battery saving. For Google now I wanted the traffic card, but I would only need it if I physically open google now. I don't really need the notification.
Click to expand...
Click to collapse
To keep device only, you should use Location mode (in secure settings) and set it to Device only or whatever you need, instead of GPS.
Note that "Device only" still uses active GPS and "This mode may use more battery power and take longer to determine your location" (Ref: https://support.google.com/nexus/answer/3467281?hl=en)
The traffic card still works on "battery saving" because it uses cellphone triangulation, and shows you the traffic in your vicinity, and based on your destination.
jj14 said:
To keep device only, you should use Location mode (in secure settings) and set it to Device only or whatever you need, instead of GPS.
Note that "Device only" still uses active GPS and "This mode may use more battery power and take longer to determine your location" (Ref: https://support.google.com/nexus/answer/3467281?hl=en)
The traffic card still works on "battery saving" because it uses cellphone triangulation, and shows you the traffic in your vicinity, and based on your destination.
Click to expand...
Click to collapse
I know, I have always used battery saving. The problem is that with battery saving, I'm having these extreme wakelocks and Google is constantly searching for my location which is what I think is the cause of the drain I'm having. I'm going to use my phone today by just using device-only location and see how the battery lasts. It should be much better since I'm hoping the phone will be deep sleeping longer. Basically, when I take my phone off the charger in the morning and I'm still at home for the first 2 hours of the day the standby time is great. It usually goes down 1-2% in those 2 hours even if I use the phone a little. However, once I leave the house is when I get constant wakelocks from location services and the battery stats to deplete a lot faster. I mean, I can still get through a day just because I don't use the screen a lot. I tend to only use about 1 hr 30 min on a regular day but I just want to play around with settings to see what works.If I can get the same standby time throughout the day that I get within the first two hours when im at home that would be great.
PsychDrummer said:
I know, I have always used battery saving. The problem is that with battery saving, I'm having these extreme wakelocks and Google is constantly searching for my location which is what I think is the cause of the drain I'm having. I'm going to use my phone today by just using device-only location and see how the battery lasts. It should be much better since I'm hoping the phone will be deep sleeping longer. Basically, when I take my phone off the charger in the morning and I'm still at home for the first 2 hours of the day the standby time is great. It usually goes down 1-2% in those 2 hours even if I use the phone a little. However, once I leave the house is when I get constant wakelocks from location services and the battery stats to deplete a lot faster. I mean, I can still get through a day just because I don't use the screen a lot. I tend to only use about 1 hr 30 min on a regular day but I just want to play around with settings to see what works.If I can get the same standby time throughout the day that I get within the first two hours when im at home that would be great.
Click to expand...
Click to collapse
That's strange. With battery saving mode, I get no wakelocks, which with device only or high accuracy, I used to get a lot of wakelocks by the location services.
But yes, no harm in trying out the options. Tasker+secure settings should be able to set up the battery saving or device only (as described above)
jj14 said:
That's strange. With battery saving mode, I get no wakelocks, which with device only or high accuracy, I used to get a lot of wakelocks by the location services.
But yes, no harm in trying out the options. Tasker+secure settings should be able to set up the battery saving or device only (as described above)
Click to expand...
Click to collapse
You get Npl wakelocks? So far I haven't gotten it and that's the wakelock that usually keeps my phone awake for 2 hours or so. basically, I think the way it works is that the device only setting uses more battery when using apps that use location such as maps but when the apps are not in use it uses no battery on location.
PsychDrummer said:
You get Npl wakelocks? So far I haven't gotten it and that's the wakelock that usually keeps my phone awake for 2 hours or so. basically, I think the way it works is that the device only setting uses more battery when using apps that use location such as maps but when the apps are not in use it uses no battery on location.
Click to expand...
Click to collapse
No. Ever since I switched to battery saving (and tasker toggling to high accuracy when I use maps), I have no location based wakelocks (no NPL wakelocks)
jj14 said:
No. Ever since I switched to battery saving (and tasker toggling to high accuracy when I use maps), I have no location based wakelocks (no NPL wakelocks)
Click to expand...
Click to collapse
Interesting, I've been having the opposite. I even took a screen shot of the wakelocks on the stock battery app where when the screen is off there's a huge amount of individual lines for awake (of course this is backed up by BBS). However when using device only the awake and screen on match almost perfectly.
PsychDrummer said:
Interesting, I've been having the opposite. I even took a screen shot of the wakelocks on the stock battery app where when the screen is off there's a huge amount of individual lines for awake (of course this is backed up by BBS). However when using device only the awake and screen on match almost perfectly.
Click to expand...
Click to collapse
Not sure why the difference, but regardless, as long as the individual 'fix' works, that's all that matters