Database Info

[ROM][CM7.1] Motorola Backflip (Motus MB300) - CyanogenMod 7.1

Warning:
I'm not liable if you screw up your device or warranty.
Read the full instructions before you begin, and beware of what you are getting into.
In case of any doubts you are subjected to ask the doubts in this thread.
This ROM has be tested working before uploading.
DO NOT USE THIS ROM IF YOU ARE UNSURE OF WHAT YOU ARE DOING.
Click to expand...
Click to collapse
Prerequisite:
1. Rooted Motorola Backflip (MB300) - of any country or provider. (AT&T or Non-AT&T)
2. Motorola USB drivers 32-bit or 64-bit.
3. You should have Android SDK installed and ADB on usb/wifi working.
4. Indeed, basic skills of using computer.
If you meet all the prerequisite you can proceed.
Installing the ROM:
Download and copy recovery.img to root directory of ur SD-Card.
Download and copy update-cm-7.1.0-BACKFLIP-signed.zip to the root directory of ur SD-card.
Your phone should be turned on normally and not in recovery mode.
Now open up your command prompt or terminal.
Type the following commands in command prompt or terminal:
Code:
adb start-server
adb devices
It will show serial number of your device under connected devices. If you got it work till here then continue to next step.
Type:
Code:
su
Approve the request on phone if prompted.
Now we need to install custom-recovery on the phone.
Type:
Code:
flash_image recovery /sdcard/recovery.img
Wait for 5 minz.
Now custom-recovery is installed on your phone.
Reboot the phone in recovery mode.
1. Power off the phone.
2. Press and hold camera button.
3. Turn on phone while keeping the camera button pressed.
4. Phone will enter fast boot, immediately press volume down key. (Ignore that it will show up key pressed).
5. Wait until recovery loads. It will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
If you don't get custom-recovery as shown in the image go back and redo the whole thing you've done something wrong.
On recovery menu select wipe and select "Wipe All". This will delete data and cache.
Click to expand...
Click to collapse
Press back button to go back to main recovery menu and select "Flash zip from SD".
Click to expand...
Click to collapse
You will see the "SDCARD: update-cm-7.1.0-BACKFLIP-signed.zip". Press home button.
ROM will start flashing here.
After the flashing is completed select "Reboot System Now".
Thats it! You've installed CyanogenMod 7.1 successfully on your backflip.
Installing Gapps:
Download your Gapps here or alternate.
Copy the downloaded "gapps-gb-20110613-signed.zip" to root directory of ur SD-Card.
Reboot into recovery.
Chose "Flash zip from SD". You will see "SDCARD: gapps-gb-20110613-signed.zip". Press home button. The Gapps will install.
Press back button and select "Reboot System Now".
You're done installing Gapps.
About ROM and Credits:
To all the people who put their efforts on building this ROM j_r0dd and of course cyanogen and amitheunlimited to help me testing this ROM and encouraging me to make this post.
This post is not for violating the laws I've not developed the ROM so naturally the credit goes to the developers. If anyone knows the developers please feel free to PM me. I will add you in credits.
Features:
Recovery:
1. USB-MS (Mount Storage)
Click to expand...
Click to collapse
2. Backup/Restore
Click to expand...
Click to collapse
3. Flash zip from SD
Click to expand...
Click to collapse
4. Wipe
Click to expand...
Click to collapse
5. Partition SD
Click to expand...
Click to collapse
6. Others (Includes Fix Permissions)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
CM7.1:
Booting up
Click to expand...
Click to collapse
Lock Screen
Click to expand...
Click to collapse
Home Screen
Click to expand...
Click to collapse
Tethering
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hit thanks if this helps. ​

This is awesome dude! I have successfully installed this on my Backflip and going to give it a try see how it all works

No problem
dontbejeff said:
This is awesome dude! I have successfully installed this on my Backflip and going to give it a try see how it all works
Click to expand...
Click to collapse
How is it workin?

Hey
This is great.. I bought Backflip mainly for the trackpad and qwerty..
Now I can upgrade..
Can you please tell me if the ROM is Gingerbread 2.3.4 ?
Awaiting...
Thanks

Yes
kingsrook14 said:
Hey
This is great.. I bought Backflip mainly for the trackpad and qwerty..
Now I can upgrade..
Can you please tell me if the ROM is Gingerbread 2.3.4 ?
Awaiting...
Thanks
Click to expand...
Click to collapse
Yes CM7.1 is Android Gingerbread 2.3.4
You can see here.

Hey again,
I am having issues with CM 7.1 ....
Can not use Tango or other voice calling.. it goes on rebooting itself..
Can you please gimme a link to froyo ROM with gapps for backflip?
I have CM7.1 custom recovery flashed.. So I guess I can flash froyo rom without a problem..
thanks again

kingsrook14 said:
Hey again,
I am having issues with CM 7.1 ....
Can not use Tango or other voice calling.. it goes on rebooting itself..
Can you please gimme a link to froyo ROM with gapps for backflip?
I have CM7.1 custom recovery flashed.. So I guess I can flash froyo rom without a problem..
thanks again
Click to expand...
Click to collapse
Yes you can install froyo ROM if you've custom-recovery installed
but the problem is that froyo is more unstable than gingerbread [CM7.1]
I'd suggest you install over-clocked kernel on CM 7.1 it might work better than before.
Reply with your results.

Thanks
Where do I get the overclocked kernel for CM 7.1 ?
I am a n00b.. Help much appreciated..
BTW now I am on CWM 6.1 froyo rom with the MB300..
What I observed is with Froyo the MB300 has more free memory than with GB rom..
Using Tango and Nimbuzz I dont get reboots.. But video is not working on Tango.. Could be firmware or memory issue ?
Also how can I get Flash installed for MB300? I dont find it on market.. Tried different markets with Enabler but still no Flash..
Maybe I am missing something..
Thanks again for the help

Information on Wifi tethering and flash player? I have installed the ROM and it's working great so far, just wish I could have these features.

work is in progress guys please wait

codices said:
Information on Wifi tethering and flash player? I have installed the ROM and it's working great so far, just wish I could have these features.
Click to expand...
Click to collapse
Tethering feature is available in cm7.1
go in settings >wireless & network settings>tethering

kingsrook14 said:
Thanks
Where do I get the overclocked kernel for CM 7.1 ?
I am a n00b.. Help much appreciated..
BTW now I am on CWM 6.1 froyo rom with the MB300..
What I observed is with Froyo the MB300 has more free memory than with GB rom..
Using Tango and Nimbuzz I dont get reboots.. But video is not working on Tango.. Could be firmware or memory issue ?
Also how can I get Flash installed for MB300? I dont find it on market.. Tried different markets with Enabler but still no Flash..
Maybe I am missing something..
Thanks again for the help
Click to expand...
Click to collapse
overclocked kernel for motus is here
signed-bf.MT.kernel.2.13.11.
this might work....not tested by me yet
&
At Last
... IM NOT RESPONSIBLE IF YOU TURN YOUR DEVICE INTO A BRICK...
Don't Forget to Say Thanks & to Raise Thanks Meter!!! If It WORKS!!!!

amitheunlimited said:
overclocked kernel for motus is here
View attachment 674410
this might work....not tested by me yet
&
At Last
... IM NOT RESPONSIBLE IF YOU TURN YOUR DEVICE INTO A BRICK...
Don't Forget to Say Thanks & to Raise Thanks Meter!!! If It WORKS!!!!
Click to expand...
Click to collapse
WOW!!! REALLY??? How lucky are we that i stumbled in here..... DO NOT USE THAT OC KERNEL!!!! OC for cm7 is BUILT IN.. and working. Settings>CMsettings>performance. Go play with the dragons.
EDIT.... For All those looking for flash... look hard, cause i havent found it. there's some arm6 flash 10.1 out there that works..eh. if its running of the sd (ext3/4)... actually thats a little less than fair. it works well for flash apps such as tinyshark but usually crashes when trying to run larger flash in the browser. There's also the puffin browser... which i HIGHLY recommend. Its about time someone made skyfire do some WORK. Puffin may very well be the best $1 you ever spent on your phone. remember where ya heard it. =D

amitheunlimited said:
Tethering feature is available in cm7.1
go in settings >wireless & network settings>tethering
Click to expand...
Click to collapse
When I go to this page it only has an option for USB tethering. What about Wifi tethering?
Thanks

codices said:
When I go to this page it only has an option for USB tethering. What about Wifi tethering?
Thanks
Click to expand...
Click to collapse
what u really want ....be specific?
you want to make your 3g gprs to wireless internet hotspot so tht u can use ur 3g net in ur lappy or other device???

nextpimp said:
WOW!!! REALLY??? How lucky are we that i stumbled in here..... DO NOT USE THAT OC KERNEL!!!! OC for cm7 is BUILT IN.. and working. Settings>CMsettings>performance. Go play with the dragons.
Click to expand...
Click to collapse
Thanks to warn us abt the OC kernel for NOT installing in CM7.1 and we are aware that Cyanogen has their own over-clockin' settings.
n well amitheunlimited just posted it here to get all the resources in one place.
This is a forum where we all developers try to collect global resources and test on our devices to seek BEST performance from our gadgets. Please be kind to everyone else, and if you've tested the kernel please let us know the flaws.

amitheunlimited said:
overclocked kernel for motus is here
signed-bf.MT.kernel.2.13.11.
this might work....not tested by me yet
&
At Last
... IM NOT RESPONSIBLE IF YOU TURN YOUR DEVICE INTO A BRICK...
Don't Forget to Say Thanks & to Raise Thanks Meter!!! If It WORKS!!!!
Click to expand...
Click to collapse
Hey Friends
Today I tested this kernel....this kernel is actually for backflip 2.1 rom & supported multi touch too...
But NOT WORKED IN CM 7.1
after installing completed ...device continously reboots
So dont try in CM 7.1

New Recovery Rom WITH Rom Manager
Hey Friends
Today I got New Recovery...yuppie!!! For All Of Us
Credit goes to the developers who developed...
Tested working greatly
Attachment:
Motorola MB300 ClockWork Recovery.
Enjoyy.
Hit thanks if you like.

Procedure for installing kernel
Procedure for installing kernel
For windows Users
go to run>Cmd
write in cmd
adb start-server
adb devices
su
flash_image recovery /sdcard/4005cwm.bf.img
wait 2mins
voila!!! Completed!!!
REBOOT NOW UR DEVICE
Don't Forget to Say Thanks & to Raise Thanks Meter!!! If it work!!!!

Features & See ur New Recovery!!!
Images for Proof
Don't Forget to Say Thanks & to Raise Thanks Meter!!! If You Like My Work!!!!

[ROM] SilverLight™ 5 - alpha released ! | Spice Mi-350n

Disclaimer: I'm not responsible for any damage caused to your device by following these instructions(though it may not happen!)
Screen Shots are in the 2nd post !!
Change Log is in the 5th post
Things i'm thinking to add are at 4th post.
My sincere credits to Yuweng & casacristo for being with me in trying to make a2sd work in MTK phones !!
Pre-requisites:
For your Computer:
- 7zip
For your phone:
-Rooted, of course !
- Modded Recovery [Get it from here]
-Make a nandroid recovery of your phone before installing.
-Full wipe/factory reset, either through phone or modded recovery is recommended required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah ! Bala's ROM is SilverLight™ |
Click to expand...
Click to collapse
Click to expand...
Click to collapse
SilverLight™
SilverLight™ 5 - alpha !​
Hi friends, sorry i'm too late than i expected. Day's passed on swiftly and i'm here to just release the alpha of Silverlight 5.
SilverLight 5 bug fixes are here : http://forum.xda-developers.com/showthread.php?p=30734779#post30734779
Important feature is that it is based on Android 2.3.6 !
It has been ported from Alcated 918D [MTK 6573]
Everything works fine. (Special thanks to yasir bro for testing it !!!)
I also named it as Stock Android 2.3.6 update for Spice Mi-350n.
It is just stock, for now
Another important thing is that, I'm making this port an open-source port. Since, i saw new rom makers emerging, it would be easy for them to cook/build custom ROMs from this port.
One thing, if someone wants to use it, do give me an information and a credit in your thread !!
Click to expand...
Click to collapse
Sorry, if i have disappointed you, but full version will be released as soon as possible.
Whats more to come:
Suspense !
You can even come to the time when i ported this one and how i suffered from there on without time to add features, in the download page !!
FROM HERE, ALL DOWNLOADS WILL BE AVAILABLE AT OUR GOOGLE CODE PAGE:
http://code.google.com/p/silverlight-roms-350n/
Click to expand...
Click to collapse
In the downloads page, download
2.3.6-update-2.zip
&
a2sd-p1.zip
First flash a2sd-p1.zip and then flash 2.3.6-update.zip.
NOTE: Flash Dark-tremor a2sd and any equivalent if you want to use it.
SilverLight™ 4:
Change Log:
*Bugs fixed
*Added new tweaks:
---Forced launcher into memory
---Raised JPEG quality to 100%
---User Interface will e rendered with GPU
---The time that a black screen is seen after a call is reduced
---Better Touch screen & Scroll responsiveness
---Better Battery life
---3G,Net-Speed & Photo,video recording quality incresed.
*Added SilverLight custom script & Loopy smoothness script at init.d
*Removed SuperCharger script
*Replaced FileExplorer with a new MIUI one - try it!
*Replaced Music app with ICS Music app - try it !
*Removed XDA app (causes few problems)
*Removed Go-Launcher EX (for space)
*Tweaked Youtube app to load 720p videos with Wi-Fi as well as 3G !
*Added a new boot_logo !
Try it now !!!
It is a SIGNED update.zip. So don't extract it as the other version.
Flashing this zip is enough if you are on SilverLight™ 3.
If you are on stock V2, then download PART1.zip only and flash it before flashing SilverLight™ 4 ! (no need PART2.zip - no problem even if you flash it).
SilverLight™ 4
DOWNLOAD: http://www.mediafire.com/?q92e83s4zn3arhh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
EXTRAS:
PART 1:(not signed) http://www.mediafire.com/?rx7gmqpj9d6il62
PART 2:(not signed) http://www.mediafire.com/?i6l67a2176l7no9
FOR A2SD:
After installing the ROM, install Terminal Emulator app from market.
Open the app and type the following one by one:
su
a2sd install
##Phone will reboot
Open the app again,
su
a2sd datasd
##Phone will reboot
Open the app again,
su
a2sd cachesd
##Phone will reboot.
THATS ALL !!!
XXXXXXXXXXXXXXXXXXXXXXXXXXX----------------------------------------------XXXXXXXXXXXXXXXXXXXXXXXXXXXX
SilverLight™ 3
Features:
>> Based on Official Spice build v2 !(thanks to yasir bro!!)
-- If you are on Bala's ROM v1.5/1.01(or did not flash your phone by following this guide), then do please flash your phone with official build v2 using this guide. It takes a mere 7 minutes for you to flash it but it takes hours together for me to make one for v1.5. If you want, i can make one for v1.5 also, but it can't be released within one week. So, bear with me & do upgrade your phone to official v2 !!!
NOTE1: If you are on Bala's ROM v1.5, then you won't lose your apps. Just flash official v2 with the help of flashing tutorial and the flash SilverLight 3 !
NOTE2 (read this only after reading the flashing guide above): If you are upgrading, then in the flashing guide linked above, in step 5, i did it like & it worked : After loading the scatter file, with battery inserted,i connected the phone by pressing Back+Menu buttons. My pc detected it and i clicked Format->Download. I kept holding it till the red process completed and from there everything went fine and flashing was successful.
Click to expand...
Click to collapse
>> ICS Themed
--This is the reason why this update took a lot of time !! My first hands on theming. So, if you have anything to say, feel free.
Click to expand...
Click to collapse
>> V6 Supercharged
--Get ready to fly with the V6 Supercharger (script created by zippelinrox). Read more about it here. To set your custom settings, just open terminal emulator, type: su --> hit enter --> type: v6
Click to expand...
Click to collapse
>> No Bloatwares !
--The spice bloatwares are removed and its a clean ROM !!
Click to expand...
Click to collapse
>> Beats audio & Bravia Engine
-- Beats audio & Bravia engine mods are included !!
Click to expand...
Click to collapse
>> DarkTremor A2SD v2.7.5.3 beat4
--Enjoy installing unlimited apps with the a2sd !! Read more on using it in the following 3rd post !!
Click to expand...
Click to collapse
>> Pre-installed apps:
--A2SD GUI
--Adfree(no more ads)
--Barcode Scanner
--GO Launcher EX v2.87 (latest)
--ICS Clock Widget
--ICS search bar
--New ICS Launcher
--MobileUncleTools
--Experia Arc S Launcher
--SpiceUp - official app of the Spice Mi-350n Support site!
--Update Me Smartphone - check & download future ROM updates from phone itself!
--XDA app
Click to expand...
Click to collapse
>> Misc features
-- Busyboxed
-- Rooted !!
--Deodexed
--Zipaligned
-- Added ICS boot animation
-- Disabled boot sounds
-- Added Galaxy Nexus's Ringtones !
-- Home button Wake up mod included(it is up to you to install NoDeepSleep.apk)
-- Replaced default font with Roboto font (stock ICS font !!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOADS:
Download: http://www.mediafire.com/?i3sk5jqd9whi2g8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Installation Instructions (SL-v3):
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing. Do not boot your phone in between.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'SilverLight-3_by_balamu96m.7z'. Extract it. Then you'll have SilverLight_Part1_by_balamu96m.zip , SilverLight_Part2_by_balamu96m.zip & SilverLight_Part3_by_balamu96m.zip(These are flashable zips. So do not extract them)
Click to expand...
Click to collapse
2) Copy all the three & place it in your sdcard. (preferably at the root).
Click to expand...
Click to collapse
3) Now boot into recovery (modded or CWM) and choose - flash zip from sdcard --> select zip from sdcard --> select SilverLight_Part1_by_balamu96m.zip.
Let it install without any error. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Now, before installing SilverLight_Part2_by_balamu96m.zip, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install SilverLight_Part2_by_balamu96m.zip by steps followed above !. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Again, with similar steps followed before, SilverLight_Part3_by_balamu96m.zip.
Click to expand...
Click to collapse
5) After installing SilverLight_Part3_by_balamu96m.zip, a do a full wipe/Factory reset in the recovery. (It is a must)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
THATS ALL !! You have successfully installed SilverLight™ 3 !!
Now boot your phone. First boot may take long time (even 10 minutes !), but don't worry. It will boot !!
STEPS TO ENABLE A2SD after installing the ROM:
NOTE: If you had done this already for Bala's ROM v1.5, no need to do again.
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
XXXXXXXXXXXXXXXXXXXXXXX_--------------------------------XXXXXXXXXXXXXXXXXXXXX
__________________________________________________________________________________________________________________________________________
VERSION 1.5
__________________________________________________________________________________________________________________________________________
Features (v1.5):
---Removed all Spice bloatwares !
---Added the following as default programs:
--A2SD GUI !~HOT~
--Mobile Uncle Tools~HOT~
--AdFree (No more Ads) ~HOT~
--Android Assistant
--Barcode Scanner
--GO Launcher EX
--Google Play Store[updated Market app] !
--Google Search[updated]
--Terminal Emulator
--YouTube
---Darktremor A2SD v2.5.7.3 beta 04~HOT~
---Added BEATS AUDIO - enhances sound. You can feel it in earphones.~HOT~
---Added Sony BRAVIA IMAGE ENGINE - enhances image quality. Try it!~HOT~
---DEODEXED !!~HOT~
---Zipaligned all apks to optimize RAM usage !
---Modified Status bar (fading error fixed) & Drop-Down with transparency & modded battery icon! (see screen-shots [v1.5]!)
---Added new colourful wallpapers to the default wallpaper gallery !
---Added Nexus One boot animation and shut animation!
---Added Samsung Vibrant's boot and shut sounds!
---Added Nexus default ringtones and notifications(error fixed!)
---BusyBox added !
---Pre-rooted, of course!
INSTALLATION INSTRUCTIONS [v1.5] :
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'Bala's_ROM_v1.5.7z'. Extract it.
You will have a folder named 'Bala's_ROM_v1.5'
In that you'll have PART-1.zip , PART-2.zip & PART-3.zip(These are flashable zips.So do not extract them)
2) Copy the folder & place it in your sdcard's root.
3) Now boot into recovery and choose - flash zip from sdcard --> select zip from sdcard --> #open folder#'Bala's_ROM_v1.5' --> select PART -1.
Let it install without any error. Now try booting your mobile. The phone will not boot (more clearly: should not boot if installation completed correctly ! lol !)
4) Now, before installing PART-2, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install PART-2 by steps followed above !
[Now try booting. It should boot now !! LOL ]
[WHAT YOU BOOTED ABOVE IS NOT THE FULLY WORKING ROM, MANY THINGS DOESN'T WORK !! SO BOOT AGAIN TO RECOVERY ]
4) Again, with similar steps followed before, install PART-3.
5) After installing PART-3, a do a full wipe/Factory reset in the recovery. (It is a must)
THATS ALL !!This is Complete Version 1.5. You have successfully installed VERSION 1.5. Sorry for making it large. I'll try reduce it later.
STEPS TO ENABLE A2SD after installing the ROM:
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
DOWNLOAD LINK::
http://www.mediafire.com/?nt6idp7vw2qdl3x
(sorry for making it large !)
_________________________________________________________________________________________________________________________________________________
VERSION 1.01
_________________________________________________________________________________________________________________________________________________
Deodexed version 1.01 added !! Same installation instructions !! Check Downloads !
Features (v1.01):
(updated 20 Mar)
1.Removed all Spice bloatwares !
2.Added the following as default programs:
-Android Assistant
-Barcode Scanner
-GO Launcher EX
-Google Play Store[updated Market app] !
-Google Search[updated]
-Nexus Revamped Live Wallpaper!
-Terminal Emulator
-YouTube
2. Zipaligned all apks to optimize RAM usage !
3.Modified Status bar & Drop-Down with new battery icon! (see screen-shots [v1.01]!)
4. Added new colourful wallpapers to the default wallpaper gallery !
5.Added Nexus One boot animation and shut animation!
6.Added Samsung Vibrant's boot and shut sounds!
7.Added Nexus default ringtones and notifications!
8. Pre-rooted, of course!
Overall it looks to be an Ultra fast & Stable ROM !!
INSTALLATION INSTRUCTIONS [v1.01] :
(instructions updated 20 mar)(fixed all reported errors!)
1. Download the file 'Balas_ROM_v1.01_GB_signed_update.zip' and copy it to your sdcard - root of the sdcard is preferred.
2. Flash it as 'update.zip' in modded recovery.
(i.e) [for beginners] Go to recovery --> Flash zip from sdcard --> choose zip from sdcard and select Balas_ROM_v1.01_GB_signed_update.zip
NOTE: Since the file is signed there is no need to disable signature verification !!
Let the installation process complete without any error.
Then reboot.
Voila !! Your new ROM is booting !!
Deodexed version may take some more time to boot than normal. Don't get afraid !
Try and post your comments !!
DOWNLOAD LINKs (update.zip)(Mediafire) :
- Normal odexed version - Bala's_ROM_v1.01_GB_signed_update.zip
- Deodexed version - Deodexed_Bala's_ROM_v1.01_GB_signed_update.zip
Screen Shots in the second post !
An extract of review posted by yasirmujtaba: (here)
yasirmujtaba said:
The rom porvided by bala is supercool
I m trying to rate it..
Style:-
1-Go launcher
2-Custom battery icon
3-Modified Notification bar
4-Custom wallpapers and ringtones & notifications
OVERALL:- 9/10
Performance:-
Very Very good response no lagging even
when skyfire dolphin and opera are running simultaneously
Ram consumption is very effective
Overall- 9/10
So the rom scores a huge number of 9
Click to expand...
Click to collapse
Hit THANKS if you like my ROM !!

Screen Shots !!
SCREEN SHOTS - SilverLight™ 3:
SCREEN SHOTS v1.5:
SCREEN SHOTS v1.01:

NOTE:
-The android version displayed there (in Bala's ROM v1.01&v1.5) is just change in number. The actual version is 2.3.4 only !! Only you know that it is 2.3.4. For others it is 2.3.7 !!
USING A2SD GUI [For v1.5+]
'A2SD settings' on the app's main screen.
------You can choose where apps that you install should be saved either in sd-ext (sdcard partition) or your internal memory.
------ 'Zipalign on boot is off' - is recommended because the ROM is already zipaligned and doing it again on boot will take more time to boot.
------'Swap is deactivated' - I have not used it.....maybe you/anyone can try and reply !
DALVIK:
-- You can choose where Dalvik cache should be saved. Go more info on Dalvik-cache, try googling n reading the wiki about it.Other things can remain the same......
---other tabs, you yourself can read & understand !!
Some more:
One thing to remember - sd-ext is like internal memory for phone, but phone can't find how much space is used or left in sd-ext. Titanium backup will help you there......
All third-party/system apps will tell that apps are installed in phone memory......you should understand that sd-ext is also like internal memory for phone and all other apps !!
Apps should be installed normally .......but your free space in internal memory will remain the same even after installing apps.....you'll notice that ur sd-ext space will be reducing........
Phone can't find how much space is left in sd-ext but titanium backup will help you to know !!
If you find decrease in phone memory even when a2sd in enabled, use a2sd gui to reinstall all app to sd-ext.....u can also type this command in terminal emulator :
su
a2sd reinstall
More over one should not move apps to sdcard in 'application settings' when using a2sd !!

These are few things that i'm trying to add:
Trying to add few requests by some users!!
Extended Power menu with Reboot, Recovery & download - working on it.
Click to expand...
Click to collapse

Change log:​
SilverLight™ 3:
*Removed Terminal Emulator
*Removed Android Assistant
*Based on Official spice build v2
*Highly modified framework-res.apk & SystemUI.apk with ICS theme.
*Added new ICS Launcher
*Added ICS search bar & ICS Clock
*Added V6 SuperCharger!
*Added Xperia launcher
*Added SpiceUp app
*Added Update-Me-Smartphone app
*Added XDA app
*Changed boot animation with ICS's one
*Disabled boot sound
*Added Roboto font
*Added Home Button wake up mod
Bala's ROM v1.5:
*Removed Nexus Revamped Live Wallpaper
*Added A2SD GUI
*Added Mobile Uncle Tools
*Added AdFree
*Added DarkTremor A2SD v2.7.5.3 beta 4
*Added Beats audio & Bravia Engine
*Added Busybox
Bala's ROM v1.01:
*Initial release

what is special in it I've already done all the things you've
done.
and what about ram consumption ......
but thanks for your hard work.....

your Balas_ROM_v1.01 not getting installed
hey.... balamu96m
your nandroid- custom ROM [Balas_ROM_v1.01] is not getting installed....
what is the problem????
i hav followed all the above steps...
i am able to Restore my nandroid backup done by me.... but when i tried your.. its not getting installed....
it shows "Oops... Something went wrong..." message.
[ i am using same recovery (fly blackbird iq260) in my phone as u hav posted screenshots above....
wanna try this rom...
help me out...

same problm here.........
Oops... Something went wrong...

balamu96m said:
please elaborate your problem.......is your phone not booting ?? or not able install in modded recovery ??
try making a wipe data/factory reset and then install the ROM......also disable 'Signature Verification' (it is a must) and try.............reply !
Click to expand...
Click to collapse
1. i hav wiped all data
2. i hav wiped SD card
3. disabled sign verification
4. unzipped yor rom and puted in proper folder.
5. but i selected to restore yor rom its shows some ..... (dots) for few second and shows oops something went wrong...
6. i am not able to install yor rom... using and testing its a later thing...

i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!

hey friends! uploaded update.zip !! It is also Zipaligned to optimize RAM usage !! check first post !! i checked it in my phone and its working !!! try it and reply !!!

balamu96m said:
i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!
Click to expand...
Click to collapse
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........

yasirmujtaba said:
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........
Click to expand...
Click to collapse
Thanks for the review dude !! now working on deodexing.........!!
will try to post it soon !

Deodexed version uploaded !! check first post !!

balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...

yasirmujtaba said:
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.

djgj said:
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.
Click to expand...
Click to collapse
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
when updating error comes up
that
zip is corrupt

deodexing !
yasirmujtaba said:
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
edit: already posted the ans !! any way i'm posting it !!
Harassing ?? Not at all !! i have no problem dude !!
Well, i don't think flashing will affect your phone because i'll have to do it many a times a day and not just 4 times !!
When ever i try and flash my ROM and many a time it'll get struck at boot screen. So i'll be restoring/flashing it many a times a day !
Still thats my view.....i dunno really !
Deodexing.........in simple terms it is like this:
Our phone splits the apks and jars (only system apks and jars) into '.odex' files for fast processing of those files ..........but when the app is split into .apk/.jar file and .odex file, it not possible to edit them and make changes. when those files are deodexed or when we flash a deodexed ROM, the two files, '.odex' file and '.apk/.jar' are combined together and we will have only the apk or jar file and not the .odex file.......hence it makes editing or modifying possible. Also,only because of this, deodexed ROM takes some more time to boot!!
So because of this we can say that it related to theming........that too 'native' theme and not just Launcher' theming which are provided by GO Launcher etc.
I hope you understand...........!! Now any one can easily make themes for our phone !! just edit framework-res.apk and SystemUI.apk, modify,test and upload !!

yasirmujtaba said:
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
when updating error comes up
that
zip is corrupt
Click to expand...
Click to collapse
error ?? i didn't get any...........try disabling signature verification...........also try clearing cache, dalvik cache and data [clear data only after a backup via Titanium Bakup or nandroid]
Try n reply !!
Currently trying to add extended power menu with reboot, recovery and download !!

hey balamu96m
i installed yor deodexed signed rom.
works good with 10mb more then other roms.
but there is some problem with status bar(notification bar)...
it stops working when i connect usb cable wid my pc...
so i think problem is with battery application.
overall nice work man

[ROM][TUTORIAL][UNOFFICIAL] Cyanogenmod 7.2 for HTC EXPLORER/PICO A310e

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FINALLY THE GREAT GUYS HERE ARE SUCCESSFULL IN BRINGING CYANOGENMOD 7.2 FOR OUR BELOVED EXPLORER
cyanogenmod 7.2 is a free, community built, aftermarket firmware distribution of android 2.3.7 (gingerbread), which is designed to increase performance and reliability over stock android for your device.
Click to expand...
Click to collapse
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Code:
desclaimer--
#you are flashing this rom (which i may add is awesome) on your own risk
#we are not responsible for any bricked devices or fried sd cards
FIRST OF ALL I HAVE NO HAND IN COMPILING THIS ROM I AM JUST BUILDING A NEW NOOB FRIENDLY THREAD (No offence to noobs as i am kinda one myself :silly: ) CREDITS BELOW
Working Features--
- WiFi
- Hardware acceleration
- RIL
- Gps
- Audio
- Usb Mass Storage
- Bluetooth
- USB Tethering
- Fm Radio
- Everything else except below
Not Working--
- Camera
- Phone sometimes reboots when playing videos
Click to expand...
Click to collapse
NOW INTRUCTIONS--​[--Unlock bootloader and root your explorer (if you haven't already) follow this link http://forum.xda-developers.com/showthread.php?t=1415223 to root. Dont create a partition just yet.
--Download cm-7-20120807-UNOFFICIAL BUILD #4-pico.zip from mediafire link below and copy it anywhere on sdcard.
--Download gaaps from link below and copy it on sdcard
--Boot into recovery
-- (optional but recommended) go to backup and restore and select backup. This will backup your phone just as it is so that if u ever wanna revert back you can just restore from recovery. (Thanx Liverpool_fan for tip)
--Go into mounts and storage and format /system and /boot and come back and wipe data/factory reset (even if you have any custom rom installed)
--Select Install zip from sdcard-> choose zip from sdcard-> browse to where you have copied the zip file and select it
--Wait for the installation to complete and download latest kernel from link below and flash it in recovery. (format of kernal MDD so update to the latest one)
--flash gaaps to install basic google apps.
--Now select reboot and wait for your phone to boot up.
--If you want to move your dalvik cache to sdext first you will have to partition your sd card. 512mb partition is enough. Use minitoolwizard to partition your sdcard. Partition it in only ext2, ext3 or ext4 format because fat32 is not supported. You can also use recovery (advanced>partition sdcard) to partition but it will erase all data on your sdcard so back it up.
--Now dowload a2sd.zip (credit- Sakindia) and flash it through recovery. You can find a2sd.zip where the kernals are uploaded (check below)
--Reboot and go into Terminal emulator and type "a2sd cachesd" (without quotes)
--Wait for the working to finish and reboot. You have 148mb internal memory free now. :good:
--Alternatively people are saying that s2e is more stable. So download s2e from play store.
--check everything except application data. Reboot.
NOTE: Either flash a2sd or install s2e.
--Enjoy.!!
(OPTIONAL)--
--Download titanium backup and come to the app list now long press on any app and select move data to sd. It will ask you to create a directory, accept! Now select menu button while still in titanium backup and select batch. Come down to option "move app data to sd". Run it to get more internal memory but I recommend to use class 6 sdcard if you are moving app data.​
LINK FOR KERNALS AND A2SD(CREDIT- sakindia)--
http://goo.im/devs/sakindia123
Click to expand...
Click to collapse
LINK FOR BUILD #1
http://www.mediafire.com/?2hash35eaw61ibn
Click to expand...
Click to collapse
LINK FOR BUILD #2
http://www.sendspace.com/file/h8s855
Click to expand...
Click to collapse
LINK FOR BUILD #3
http://www.sendspace.com/file/x14u9i
Click to expand...
Click to collapse
LINK FOR BUILD#4
http://www.sendspace.com/file/ci209s
http://www.mediafire.com/?oy3mrrf6ts9olim
Click to expand...
Click to collapse
Gapps
http://goo.im/gapps/gapps-gb-20110828-signed.zip
Click to expand...
Click to collapse
If you want to help in development or want the source code check out this link
http://forum.xda-developers.com/showthread.php?t=1793026
Click to expand...
Click to collapse
Now importantly THE CREDITS--
- lirokoa
- derefas
- LiVeRpOoL-FaN
- rom2maru
- sakindia
AGAIN I HAVE NO HAND IN DEVELOPMENT OF THIS PORT
I will be uploading screenshots and mediafire links soon! Please be patient!!

RESERVED for FAQs and troubleshooting!!

ReSeRvEd just like that :silly:

:cyclops:
Reserved for Changelogs ....too lazy to do it now

Fantastic work!
But I suggest you to change the thread name, and including the following "[TUTORIAL]", because poeple will think that is the main thread to this rom.
Regards!

a nice guide to help people:good:, one thing to though is you need to say "backup your old rom with cmw 1st before installing any other" (just incase) and also to stop conflicts from other roms that have been installed you really need to format system, boot, in mounts/storage menu aswell as factory wipe..............

You sir just made my day.

LiVeRpOoL-FaN said:
a nice guide to help people:good:, one thing to though is you need to say "backup your old rom with cmw 1st before installing any other" (just incase) and also to stop conflicts from other roms that have been installed you really need to format system, boot, in mounts/storage menu aswell as factory wipe..............
Click to expand...
Click to collapse
Not really. You'd only ever need to do a factory wipe/reset and then dalvic-cache wipe Cheers.

Txask said:
Fantastic work!
But I suggest you to change the thread name, and including the following "[TUTORIAL]", because poeple will think that is the main thread to this rom.
Regards!
Click to expand...
Click to collapse
Did it ..thanx for the heads up!!(sorry reached thanx limit of the day will surely do it tomorrow)
LiVeRpOoL-FaN said:
a nice guide to help people:good:, one thing to though is you need to say "backup your old rom with cmw 1st before installing any other" (just incase) and also to stop conflicts from other roms that have been installed you really need to format system, boot, in mounts/storage menu aswell as factory wipe..............
Click to expand...
Click to collapse
Did this too..thanxx for the tip!!

AIndoria said:
Not really. You'd only ever need to do a factory wipe/reset and then dalvic-cache wipe Cheers.
Click to expand...
Click to collapse
thats what i thought..and dalvik cache also gets cleared by factory wipe!! Anyway whats the harm in being extra cautious!!

ToinouAngel said:
You sir just made my day.
Click to expand...
Click to collapse
I aim to please :angel:

vshl2995 said:
I aim to please :angel:
Click to expand...
Click to collapse
Yeah well I can't unlock the bootloader, thanks to HTC Sync who doesn't recognize my phone. So I'm screwed.

ToinouAngel said:
Yeah well I can't unlock the bootloader, thanks to HTC Sync who doesn't recognize my phone. So I'm screwed.
Click to expand...
Click to collapse
Did you download the latest htc sync software? Here
http://www.htc.com/sea/software/htc-sync/

vshl2995 said:
Did you download the latest htc sync software? Here
http://www.htc.com/sea/software/htc-sync/
Click to expand...
Click to collapse
Yeah, but no luck. I'll try on another laptop when I have a chance.
EDIT: Windows 8 seems to be the problem, I can't update the drivers with the unrevoked f.ile. So yeah, I'll try with Windows 7.

ToinouAngel said:
Yeah, but no luck. I'll try on another laptop when I have a chance.
EDIT: Windows 8 seems to be the problem, I can't update the drivers with the unrevoked f.ile. So yeah, I'll try with Windows 7.
Click to expand...
Click to collapse
You shouldn't really use consumer preview as your primary OS..u should install it in a different partition!!

vshl2995 said:
You shouldn't really use consumer preview as your primary OS..u should install it in a different partition!!
Click to expand...
Click to collapse
I know, I installed the Consumer Preview in order to try it out, problem is I was doing multiple things at the same time and accidentally installed it over Vista.
I was too lazy to reinstall Vista back so I just decided to wait for the final version to be released as the preview works just fine for everything I do with my laptop... Well until now anyway, ha.

ToinouAngel said:
I know, I installed the Consumer Preview in order to try it out, problem is I was doing multiple things at the same time and accidentally installed it over Vista.
I was too lazy to reinstall Vista back so I just decided to wait for the final version to be released as the preview works just fine for everything I do with my laptop... Well until now anyway, ha.
Click to expand...
Click to collapse
Lol..

(I would use jaggy's tutorial to ask but since it hasn't been active for ten days I thought I'd be better to ask here instead of bumping the other thread, if I'm wrong I apologize)
So yeah, I'm still at the rooting process and it seems I'm definitely out of luck on this one.
So first off, I apparently managed to unlock the bootloader (and it IS unlocked, when I'm in bootloader mode I do have the "*** unlocked ***" on top of the screen) and at the same time keeping my apps, settings, etc...This was the first flag that something was wrong.
Adding the Recovery seems to have worked out fine, however when I tried to install the Superuser.zip I got the apparently not-so-uncommon "(Status 0) Installation aborted" message. I did some research and tried the method of removing the extra "updater-script~" from the archive but it did not work. Tried the method of doing a nandroid backup and then installing Superuser but no luck either.
I'm getting seriously hopeless, any idea on what I might have done wrong and how to get Superuser working?

Which recovery did you install, I was having some problems flashing anything with non-yannou's (I know i wrote it stupid but, you've got the idea )
Anyway, give a try to flash some rom, not sure if it will work without superuser installed, but nothing worse can happen (I think)

shortyoko said:
Which recovery did you install, I was having some problems flashing anything with non-yannou's (I know i wrote it stupid but, you've got the idea )
Anyway, give a try to flash some rom, not sure if it will work without superuser installed, but nothing worse can happen (I think)
Click to expand...
Click to collapse
I installed the Recovery given by jaggy's tutorial. But Recovery isn't the problem as far as I know, since I've the option to install .zip file when in Recovery mode. My only issue comes from the fact that the Superuser file won't install itself.

{{ROM}}|UPDATE|[Custom rom for micromax A57]|v 2|

Custom rom for Micromax A57 ..NINJA3
***Updated version***
(BASED ON Stock rom 2.3.5)
FEATURES
Added data/app functionality
added xloud and beats audio
new settings mod
Fast remount and mount
fully moded UI
Transparent settings widget
Link2sd and titanium backup were added
New bootanimation and shutdown animation
icecream sandwhich ringtones
walkman as default music player
Rooted with latest su
Busy box added
zipaligned
freed up internal memory
optimized RAM for better performance
Modded settings
new bootanimation added
Increased battery performance
Increased touch responses
Increased camera recording quality
Improved 3G handling performances
Improved proximity sensor
Improved net speed
init.d support
and lots of tweaks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD:cyclops::cyclops::cyclops::cyclops::
Dont forgot to download this update fix...
Update fix
How To Flash This RoM
Use Cwm Recovery to flash This Rom
If you already have Cwm installed then Go on with below steps to install the Rom
0.
Recreate or format Ext2/3/4 partitions if any
1.
Download the Rom Zip
2.
Place the zip In Sdcard
3.
Go to Cwm Recovery
4.
Wipe Data & Cache
5.
Wipe Cache
6.
Select Mounts and Storage>format system>yes
7.
Select Advance>wipe dalvik cache>yes>
8.
Then Flash Rom
9.
After flashing again do wipe data/factory reset..thats it
10.
now again select install zip from sdcard..
11.
And flash the update fix
12.
Reboot the phone
13.
Now enjoy with the new rom​
Credit:-
1. Sahil Deep,
2.Violet Edges
2. [URL="https://www.facebook.com/Dhinesh77"]Dhinesh Kumar[/URL] ...:victory::victory::victory::victory:

help
how to flash cwm

navinkumar1892 said:
how to flash cwm
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=36056920

any easy way to to flash cwm.. because i dont have any sdk tools

__JOhnny said:
any easy way to to flash cwm.. because i dont have any sdk tools
Click to expand...
Click to collapse
FAstboot method...
and the recovery is here
http://forum.xda-developers.com/showthread.php?p=36056920

Deep inside DD-GB v2 (Custom ROM for Micromax A57 by dinesh77)
Deep inside DD-GB v2
================
There were few friends like Priyank Thakur, 'Deadman Akshay' & Monty Kumar faced..(Serious) Screen OFF (Deep Sleep) issue with DD-GB v2
--I confirm that the raised issue is the Valid problem.... I too faced the same
and has to be verified. In addition I have almost researched on this ROM I have interesting outcomes..please go steady..its really serious for Ninja 3 Development in future.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Success of this ROM:
I congratulate the Develope Dhinesh Kumar (dhinesh77) on successful edition of DD-GB v2
-- Yes this is definitely a Successful Custom GB ROM for Micromax A57 and was got praised by almost all at including me
-- All basic functions working perfect and no issues at all
-- All though no much build prop tweaks added but enough to get us speed and added functionality as there are required init.d tweaks
-- xloud and beats audio: sound enhancements also works up to some extent but personally I want so much insist on that
-- This ROM has got additional framework files from Sony framework to support audio enhancement.
-- You can have good gaming experience on this ROM without adding any additional Tool for the same
-- And several additional Features. For details visit: http://forum.xda-developers.com/showthread.php?p=37207089
-- My overall Experience with this ROM is quite better compared to other custom ROM published till now.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- I saw apps2sd working OK with this ROM
-- apps2sd transfers all apps automatically to apps2sd partition
-- even Titanium backup apps restores in apps2sd partition and TB shows capacity of this partition when it starts
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
However folling are findings that might have stunned me:
========================================
CWM BAckup of DDGB 2 Works ???
-- CWM backup of DDGBv2 is not at all working. Someone try this..
-- When I tried CWMbackup to restore it landed up into bootlop at all 3 times; where as the same time my other CWM backup could restore my device fully..
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Re-Flashing DDGB V2 ROM is an issue for me: Very Amazing observation
-- Some how, I while trying New mods of JT along with several other apps. When I installed many things all together and got a bootloop (somehow)
-- I when failed to load CWN Recovery; tried to flash the DDGBv2 ROM itself. I tried this for 3 times but all 3 times it stuck into booloop.
-- But when I tried to Flash other ROM it worked.... I want to know the reason !!!
Expert Comments on this, Please: Jyothis Thaliath, Sree Atitde Adjstmnt, Dhinesh Kumar, Hardy Ahir, Shashank, Meet and any one who friendly enough on doing things with their devices NOTICE AND COMMENT PLEASE...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Boot Sound has been added but its not working coz, added sound is not in required format. It has to be boot.wav, shutdown.wav and android_audio.mp3 (here Dhinesh have provided all .mp3 files, so no boot sound on reboot or shutdown)
-- Note: No need to add any additional files in library or etc for getting boot audio or shutdown audio as discussed by our friend Panneer.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
'Linux partition' and 'androidswap' thing working with this ROM and got Good Gaming experience with this ROM although it wasn't consistent every time and for that I dont blame this ROM but the Linux partition. I tried all this to play Temple Run 2.
-- I am still confused on this Linux partition whether it works always or sometimes. Lags still there many a times and some times its like a FISH !!!.
-- but the fact was that I created the Linux partition when I was on GINGER XF and i also configured swappaines during that time only.
-- When I tried all method to configure Linux partition with DDGB v2 I could not configure swappines and the error every time was something like " the said partition is busy"
-- To overcome that I rebooted into recovery and tried creating swappines but failed. Why I tried this coz i was successful with this method while giving demo (setting up) this linux partition on Ashish Chopra 's device (a member here) using TV8. Lol but the same method did not work for myself.( Ashish Chopra )
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PLEASE MARK THIS:
Remember Friend DO NOT take my words here as a criticism on DD-GB v2. I also voted this ROM as the best till now and liked it as well. HEre my too much detailed post is to get some underneath hidden facts behind issues occurred with ROM flashing and Backups
Let find out the reasons behind it so that If its a real issue then can be corrected in Next versions of ROMs but our fellow members...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What can be the ISSUE behind all this ????
I had several doubts and at the top of the list is: APPS2SD as Kitchen warns that apps2sd is not compatible with A57
So the Doubt List comprised of following:
1. Apps2SD
2. Added files in /system/Framework in this ROM
3. Added files in /system/bin and /system/xbin
4. 'XLoud function' or 'Beats Audio' functionality and related files in /system
5. Configuration of 'Linux Partition' and the 'androidswap' file in init.d
I really want the Developer and other experts to take this post seriously. Hope we can get something out of it...
Files Attached : Logcat.txt attached (this was after I tried to Flash CWM backup of DDGB V2)

__JOhnny said:
any easy way to to flash cwm.. because i dont have any sdk tools
Click to expand...
Click to collapse
Download and rename it to recovery.img
Place it in Factory_update.zip (by replacing the stock recovery.img)
Now flash the Update.zip in recovery mode.
Done the CWM is no on yr Device on reboot.:good:

VioletR said:
Deep inside DD-GB v2
================
There were few friends like Priyank Thakur, 'Deadman Akshay' & Monty Kumar faced..(Serious) Screen OFF (Deep Sleep) issue with DD-GB v2
--I confirm that the raised issue is the Valid problem.... I too faced the same
and has to be verified. In addition I have almost researched on this ROM I have interesting outcomes..please go steady..its really serious for Ninja 3 Development in future.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Success of this ROM:
I congratulate the Develope Dhinesh Kumar (dhinesh77) on successful edition of DD-GB v2
-- Yes this is definitely a Successful Custom GB ROM for Micromax A57 and was got praised by almost all at including me
-- All basic functions working perfect and no issues at all
-- All though no much build prop tweaks added but enough to get us speed and added functionality as there are required init.d tweaks
-- xloud and beats audio: sound enhancements also works up to some extent but personally I want so much insist on that
-- This ROM has got additional framework files from Sony framework to support audio enhancement.
-- You can have good gaming experience on this ROM without adding any additional Tool for the same
-- And several additional Features. For details visit: http://forum.xda-developers.com/showthread.php?p=37207089
-- My overall Experience with this ROM is quite better compared to other custom ROM published till now.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- I saw apps2sd working OK with this ROM
-- apps2sd transfers all apps automatically to apps2sd partition
-- even Titanium backup apps restores in apps2sd partition and TB shows capacity of this partition when it starts
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
However folling are findings that might have stunned me:
========================================
CWM BAckup of DDGB 2 Works ???
-- CWM backup of DDGBv2 is not at all working. Someone try this..
-- When I tried CWMbackup to restore it landed up into bootlop at all 3 times; where as the same time my other CWM backup could restore my device fully..
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Re-Flashing DDGB V2 ROM is an issue for me: Very Amazing observation
-- Some how, I while trying New mods of JT along with several other apps. When I installed many things all together and got a bootloop (somehow)
-- I when failed to load CWN Recovery; tried to flash the DDGBv2 ROM itself. I tried this for 3 times but all 3 times it stuck into booloop.
-- But when I tried to Flash other ROM it worked.... I want to know the reason !!!
Expert Comments on this, Please: Jyothis Thaliath, Sree Atitde Adjstmnt, Dhinesh Kumar, Hardy Ahir, Shashank, Meet and any one who friendly enough on doing things with their devices NOTICE AND COMMENT PLEASE...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Boot Sound has been added but its not working coz, added sound is not in required format. It has to be boot.wav, shutdown.wav and android_audio.mp3 (here Dhinesh have provided all .mp3 files, so no boot sound on reboot or shutdown)
-- Note: No need to add any additional files in library or etc for getting boot audio or shutdown audio as discussed by our friend Panneer.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
'Linux partition' and 'androidswap' thing working with this ROM and got Good Gaming experience with this ROM although it wasn't consistent every time and for that I dont blame this ROM but the Linux partition. I tried all this to play Temple Run 2.
-- I am still confused on this Linux partition whether it works always or sometimes. Lags still there many a times and some times its like a FISH !!!.
-- but the fact was that I created the Linux partition when I was on GINGER XF and i also configured swappaines during that time only.
-- When I tried all method to configure Linux partition with DDGB v2 I could not configure swappines and the error every time was something like " the said partition is busy"
-- To overcome that I rebooted into recovery and tried creating swappines but failed. Why I tried this coz i was successful with this method while giving demo (setting up) this linux partition on Ashish Chopra 's device (a member here) using TV8. Lol but the same method did not work for myself.( Ashish Chopra )
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PLEASE MARK THIS:
Remember Friend DO NOT take my words here as a criticism on DD-GB v2. I also voted this ROM as the best till now and liked it as well. HEre my too much detailed post is to get some underneath hidden facts behind issues occurred with ROM flashing and Backups
Let find out the reasons behind it so that If its a real issue then can be corrected in Next versions of ROMs but our fellow members...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
What can be the ISSUE behind all this ????
I had several doubts and at the top of the list is: APPS2SD as Kitchen warns that apps2sd is not compatible with A57
So the Doubt List comprised of following:
1. Apps2SD
2. Added files in /system/Framework in this ROM
3. Added files in /system/bin and /system/xbin
4. 'XLoud function' or 'Beats Audio' functionality and related files in /system
5. Configuration of 'Linux Partition' and the 'androidswap' file in init.d
I really want the Developer and other experts to take this post seriously. Hope we can get something out of it...
Files Attached : Logcat.txt attached (this was after I tried to Flash CWM backup of DDGB V2)
Click to expand...
Click to collapse
Viloet edges first of all i want to convey my thanks for submitting review on DD_GB rom.....
``````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
I think the major issue here is phone not booting when tried to reflashing or restoring CWM backup...
This issue is solvable when we perform additional step after reflashing or restoring rom..the step is wipe data/factory reset alone...
After that when we reboot our phone will boot normally...
Next is linux swap error:
``````` `` ``````` ``````` ```````
IN my phone i have created linux swap partition using mini tool.as third partition...However i never configured that partition using any special software like swapper2 & etc..But heavy games r working well like gta3,temple run 2 and so on..
For configuring swap I think we dont want any softwares It will got automatiically working (Solution for testing)
If it not works fell free to post reply...
Regards,
Dhinesh Kumar

VioletR said:
Download and rename it to recovery.img
Place it in Factory_update.zip (by replacing the stock recovery.img)
Now flash the Update.zip in recovery mode.
Done the CWM is no on yr Device on reboot.:good:
Click to expand...
Click to collapse
Way is factory Update zip if not much trouble
Can you do it for us who don't no much about it
Sent from my GT-I9103 using xda premium

:good::good::good: Version 2 Is Really Good
I am on it at present... :angel:

Easy way to FLASH CWM RECOVERY in just 5 minute
Downlaod CWM: A57recovery.img : http://forum.xda-developers.com/showthread.php?t=2073337
Download Recovery Manager : pm me for the link
1. Copy A57recovery.img in SD card root,
2. Now install the recovery manager.apk normally
3. Now open the recovery manager app you recently installed.
4. Click on recovery in app menu.
5. There click on install recovery
6. Then click on the recovery image name of ‘A57recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your recovery
Thanks to violetR
Please press thanks if it helped

VioletR said:
:good::good::good: Version 2 Is Really Good
I am on it at present... :angel:
Click to expand...
Click to collapse
Thanks violet: :laugh::laugh::laugh:

Is it possible for someone to make notification toggle for our device

Where can I get stock ROM and recovery ?It is better while claiming for warranty.
Sent from my GT-S5570 using xda premium

i flash this rom.. Works Good
Btw will you please share Stock ROM

__JOhnny said:
i flash this rom.. Works Good
Btw will you please share Stock ROM
Click to expand...
Click to collapse
Link for stock rom:
`````` ``` ```````` ```````
http://www.mediafire.com/?b1vvdyxdnz6z66k
Note:
U need stock recovery for flashing stock rom..
U can get stock recovery from stockrom.zip itself....
so no problem to switch between roms...

Aniruddhagupte11 said:
Where can I get stock ROM and recovery ?It is better while claiming for warranty.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Link for stock rom:
`````` ``` ```````` ```````
http://www.mediafire.com/?b1vvdyxdnz6z66k
Note:
U need stock recovery for flashing stock rom..
U can get stock recovery from stockrom.zip itself....
so no problem to switch between roms..

small fixes would be great
Great job guys and Thanks for Rom, I am currently running this Rom. I found some problems if u may fix it would be great
-- I am unable to install facebook app in the device, I used to install the updates in the Stock Rom as the stock rom already contains the facebook. So what i have done is taken the stock rom facebook app and installed but unable to update it and even the fruit ninja, etc., It shows device is incompatible.
-- The dialer app. It doesnt show the call time and date. I have tried to replace the dialer with samsung dialer but it doesnt work ( for me ). if there is a app which shows the time and date of the call and from which sim the call comes from. that app would be great like exdialer but with this app it doesn't show what sim the call came from.
-- my humble request to please increase the ear piece volume, i dont know whether it is hardware or software problem. I have tried all the tweaks and apps which are available in market but nothing works.
Please reply me, I am ready to test the ROM, i have once bricked the phone went for hardware replacement also . he gave the hardware part which have damaged lol...

Help !!
dhinesh77 said:
Custom rom for Micromax A57 ..NINJA3
***Updated version***
(BASED ON Stock rom 2.3.5)
FEATURES
Added data/app functionality
added xloud and beats audio
new settings mod
Fast remount and mount
fully moded UI
Transparent settings widget
Link2sd and titanium backup were added
New bootanimation and shutdown animation
icecream sandwhich ringtones
walkman as default music player
Rooted with latest su
Busy box added
zipaligned
freed up internal memory
optimized RAM for better performance
Modded settings
new bootanimation added
Increased battery performance
Increased touch responses
Increased camera recording quality
Improved 3G handling performances
Improved proximity sensor
Improved net speed
init.d support
and lots of tweaks
DOWNLOAD:cyclops::cyclops::cyclops::cyclops::
Dont forgot to download this update fix...
Update fix
How To Flash This RoM
Use Cwm Recovery to flash This Rom
If you already have Cwm installed then Go on with below steps to install the Rom
0.
Recreate or format Ext2/3/4 partitions if any
1.
Download the Rom Zip
2.
Place the zip In Sdcard
3.
Go to Cwm Recovery
4.
Wipe Data & Cache
5.
Wipe Cache
6.
Select Mounts and Storage>format system>yes
7.
Select Advance>wipe dalvik cache>yes>
8.
Then Flash Rom
9.
After flashing again do wipe data/factory reset..thats it
10.
now again select install zip from sdcard..
11.
And flash the update fix
12.
Reboot the phone
13.
Now enjoy with the new rom​
Credit:-
1. Sahil Deep,
2.Violet Edges
2. [URL="https://www.facebook.com/Dhinesh77"]Dhinesh Kumar[/URL] ...:victory::victory::victory::victory:
Click to expand...
Click to collapse
My A57 hanged on reboot startup screen and dont working please help asap!!..

pratimdutta said:
My A57 hanged on reboot startup screen and dont working please help asap!!..
Click to expand...
Click to collapse
do you have installed cwm recovery..If yes go to recovery do wipe data/factory reset. done

[GB 2.3.5] One~ROM | YXTEL G926 Triple SIM | China Phone |

[GB 2.3.5] One~ROM | YXTEL G926 Triple SIM | China Phone | Deodex | by .:: brijeshep ::.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
# One~ROM is a Deodexed Custom ROM based on Stock firmware
# It is not ICS/JellyBean.
# This ROM is based on 2.3.5 Stock GB Version.
# Device Supported : YXTEL G926 Spreadtrum build Cheap Triple SIM China Phone. I bought this phone from china mobile market for Rs.2500/-
# Android development community is free and open sourced. So you need not to pay for using this ROM.
# All the applications included in the ROM are free. There is no warez. If you found any paid app please PM me.
# This is not a Copyrighted ROM. You can use any part of my ROM (APKs, Mods etc). Just list my name in credits... Check my Credits section for some original works.
Click to expand...
Click to collapse
More info about this Phone,
Yxtel G926 - YouTube
ebay.in
tradus.com
shopclues.com
shopping.rediff.com
coolicool.com
Caution: This update should be strictly applied to the devices which are having the model number as YXTEL G926 Triple SIM. If you still continue to update in other device, then we should not be held responsible for any damage happened.
Disclaimer: Neither this website, nor developer should be held responsible for any damage happened to your device in the process of following the instructions mentioned in this article. It’s very unlikely that there will be any issues but just in case if at all there are any issues then we are committed to help you in solving the same.
I'm not responsible for bricking your phone but that probably wont happen..
Deodexed Applications and Framework.
Blotware Removed. Smooth, Fast Performance.
Modified 3 Colored Signal Bars
More Battery themes with OG Battery Mod.
Modded Holo Launcher for G926
Modded Boat Browser Free as Chrome
Some FW UI Resources changed according to Ace-i-Sure ROM.
More Wallpapers added
Root Browser Free as Default File Manager
Hot Reboot for 4 way reboot.
JB Themed Stock Alarm app.
Google Play Store v.4.6.17
Ad-free
ROM Change Log: 2014.03.23
Initial Release
Before doing anything wrong while installing this rom to your phone, make sure that you have the following items in your hand.
Do you have a PC/Laptop ? :laugh:
Do you have Spreadtrum Drivers ? Find out it from here...
Do you have the USB Cable for your phone? :laugh:
Do you have STOCK FIRMWARE for your YXTEL G926 Triple SIM Phone ? Find out it from here...
Do you have Research Download Tool for Flashing? Find out it from here...
Do you have ClockWorkMod Recovery (CWM) ? Get it from here...
Do you have Mobileuncle MTK Tools App ? Get it from here...
Do you Backup your Contacts, Apps & Messages or A Full Backup?
All the above tools are ready? Then Read ROM Flashing Instructions carefully...
Now proceed to ROM Download and Flashing ! :victory:
One.ROM.G926.2014.03.23.zip (Google Drive, 93 MB)
Want to download it to Mobile? Put your QR Scanner here...
No QR Scanner? Get one from Play Store...
You've to Root your phone. Guide is here...
Copy recovery.img (CWM) and Mobileuncle MTK Tools.apk to SD Card.
Install Mobileuncle MTK Tools.apk
Run it and Grant Root Permission.
Select Recovery Update and Choose recovery.img in Recovery file in SD Card. Confirm the action and Reboot to Recovery to verify.
After confirming ClockworkMod Recovery 6.0.2.9, Reboot Phone.
You have to download the ROM zip file.
Copy it to your phone's SD Card.
Turn off your phone
Go to recovery mode (ClockWork Recovery) (Volume (-) button + Power button) or using Mobileuncle MTK Tools or Hot Reboot App.
We appreciate to BACKUP your Current ROM before moving to next step
Mount /system & /data
Select wipe data / reset and Confirm the action
Select wipe cache partition and Confirm the action
Select install zip from sd and select the rom zip file & Confirm the action
Enjoy!
Installing ClockWork Recovery - Screens:-
Known Bugs / To do / Tips:
No Battery Icon on First Boot? Multiple click on the Blank Battery Area. And apply any of the 8 battery icon styles
Need to fix more FW-UI Layouts. Wait for next Update!

Flashing Firmware with Research Download:- (If you were stuck on boot logo/boot loop)
Turn off the phone.
Keep holding the "- volume"-key. Connect USB
Install Drivers
Research Download - Configure as per screens below
Start
Remove Battery
Hold (-) insert usb then battery
After pass, Remove battery
Remove usb and reboot phone
Installing Stock Firmware - Screens:-

Version: 2014.03.23 Screenshots:

Patches:-
It's better to replace default Chinese superuser concerning malware security issues.
Download SuperSU app from here... and Flash it with CWM after mounting /system.

ElectronikHeart & thedevilashish for ClockWorkMod Recovery For Spreadtrum Phones
xUltimate Tool for Deodexing Stock ROM.
SuperSU for SU binary & Superuser app
OGBatteryMod by Osama Ghareeb
Android 4.3 Boot Animation collected by DamnTarget
Virtuous Ten Studio - Recompiling apks
Notepad++ - Editing xml, smali
ZipSigner - Signing rom zip files
Adobe Photoshop - Editing pics
7Zip & WinRAR - Extracting resources
Search Everything Tool - Quick Searching files in my PC
QtADB Tool - ADB File transfer
wallpaperswide.com - Wallpapers
www.android.com/kitkat - Android Versions Wallpapers
Google Chrome Browser in PC - Getting those Android Versions Wallpapers from it's cache & It's my best internet gateway...
Google Images - Searching Icons...
My HCL Me Netbook
BSNL Broadband...
If I forget anyone... Just PM Me before Firing me...

Hey Buddy. Thanks a ton. Just 1 small request. Is it possible to create a ROM for Android ICS or Jellybean?

y2knarayan said:
Hey Buddy. Thanks a ton. Just 1 small request. Is it possible to create a ROM for Android ICS or Jellybean?
Click to expand...
Click to collapse
I don't think so... These Cheap China Phones have little RAM, So it bundled with 2.3.x and Faked as 4.x by editing build.prop. We've to tweak the old os to get the best results.
THANKS! Don't say it, press it!

thanks buddy !!

y2knarayan said:
thanks buddy !!
Click to expand...
Click to collapse
Hey Bro.Can you please edit Android Version to 4.2.2 in the Build.Prop file and attach only that file. Won't change much, but just a feel good factor

y2knarayan said:
Hey Bro.Can you please edit Android Version to 4.2.2 in the Build.Prop file and attach only that file. Won't change much, but just a feel good factor
Click to expand...
Click to collapse
:laugh:
May be you'll get a full JB/KK Appearance with this Set... I'm working on that.. But, I'm busy right now... Expect it after the General Election here in India....

brijeshep said:
:laugh:
May be you'll get a full JB/KK Appearance with this Set... I'm working on that.. But, I'm busy right now... Expect it after the General Election here in India....
Click to expand...
Click to collapse
Hey Bro. Elections are done. Ab Ki Baar Modi Sarkar.
Just wanted to follow up if you've managed the full KK/JB appearance and / or anything else?

y2knarayan said:
Hey Bro. Elections are done. Ab Ki Baar Modi Sarkar.
Just wanted to follow up if you've managed the full KK/JB appearance and / or anything else?
Click to expand...
Click to collapse
I've been working on that... Finished working on Settings.apk and SystemUI.apk. Now Working on Proper Indic Language Rendering... I think it may take some time... :cyclops:

brijeshep said:
I've been working on that... Finished working on Settings.apk and SystemUI.apk. Now Working on Proper Indic Language Rendering... I think it may take some time... :cyclops:
Click to expand...
Click to collapse
Thanks Bro. And eagerly awaiting for the same. And please, edit the Android version to 4.4 in the Build Prop file too

Hey Bro, am not an expert, but wouldn't it be easier to embed one of the existing kitkat launchers into the rom? Given below is the link to one such launcher for Android 2.3.
http://forum.xda-developers.com/showthread.php?t=2514743

Hey Bro, really appreciate your effort. But any luck with the Language rendering. Am having problems with whatsapp hindi font
Also, if you could add a Kitkat launcher, it would be really great

Nyc
Hello Sir I m a dev of mmx a65 & mmx a35
me & my team Cyanokat made Universal ROM for all Spreadtrum devices
Must Try this
forum.xda-developers.com/android/development/rom-invincible-s5-returns-sc6820-sc8810-t2907725/
World's First Universal rom & its tested on 12devices till now
plz test it on ur device too

brijeshep said:
Flashing Firmware with Research Download:- (If you were stuck on boot logo/boot loop)
Turn off the phone.
Keep holding the "- volume"-key. Connect USB
Install Drivers
Research Download - Configure as per screens below
Start
Remove Battery
Hold (-) insert usb then battery
After pass, Remove battery
Remove usb and reboot phone
Installing Stock Firmware - Screens:-
Click to expand...
Click to collapse
the firmware u gave has sc6820_Android_scatter_mtd_DH , how to flash wit downloader? .pac file is to be flash with sp flashtool? i am confuse here plzz help me, i have this phone stuck on logo