hi.
i was installed the last CM9 on my samsung galaxy s2 i9100, and iv'e got a very annoying problem.
every time that my phone is sleeping on the lock screen for more then 20 seconds- it stocks and won't turn on (i need to put out the battery and reboot..)
please help me because i really like this rom and i can't use it normally with that problem.
*i was trying to install an AOSP 4.0.3 KP4 rom,and i had the same problem.
-all the installation was with full wipe!!
how can i fix this?
thank you.
please someone!!! :\
it seems like i'm the only one that have this crashes...
what did i did wrong..??..
Try increasing the minimum cpu frequency.
Dark3n said:
Try increasing the minimum cpu frequency.
Click to expand...
Click to collapse
and how can i do it? where should i need to go to put the CPU down? by "antutu cpu master" ??
and one last question- will it help me for sure?
thank's bro
I have had the same problem. I have installed SetCPU then set screen off profile using 500 as a minimum. So far so good .
Edit. 10 hours so far and no crashes.
Sent from my GT-I9100 using Tapatalk
You can set your CPU speed using SetCPU app
SOMEONE ???
amitzzxx said:
SOMEONE ???
Click to expand...
Click to collapse
go to stock if you can't fix this little problem
amitzzxx said:
SOMEONE ???
Click to expand...
Click to collapse
CM9 is beta, so live with it.
ITS HAPPENING WITH ANY ICS ROM THAT I'M TRYING TO INSTALL.
i tried beta 1.1 aosp/cm9/tw version/kp8/kp4/kp2/kp1
and all of those does crashing on lockscreen!!! is there a problem with my phone??
this way a only way for u is just going back to stock (or other non-ics rom) or try installing setcpu o deamoncontroller with andrev_oc (that is the better solution as i think)
If you bothered to read through the thread that you downloaded the Rom from, you would see:
A. You are not the only person with the problem
B. There is no fix at the moment, after all it is still EXPERIMENTAL!
killall said:
If you bothered to read through the thread that you downloaded the Rom from, you would see:
A. You are not the only person with the problem
B. There is no fix at the moment, after all it is still EXPERIMENTAL!
Click to expand...
Click to collapse
thanks good to know
תודה גבר..
But I guess someone got his 10 posts
please someone!!! :\
it seems like i'm the only one that have this crashes...
what did i did wrong..??..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi frends! I today instal oficial RUU ICS for my desire S. ITs very slow and have bug and lag. I very hate ICS. I before use GB 2.3.5 with htc sense 3.0 and he work perfect, no bugs no lags. How to back GB 2.3.5? Or which rom to instal, rom must be stable, quickly very, no bugs, no lags. Help me please. I very nervous...
milosrdni94 said:
Hi frends! I today instal oficial RUU ICS for my desire S. ITs very slow and have bug and lag. I very hate ICS. I before use GB 2.3.5 with htc sense 3.0 and he work perfect, no bugs no lags. How to back GB 2.3.5? Or which rom to instal, rom must be stable, quickly very, no bugs, no lags. Help me please. I very nervous...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How many times do people need to ask the same questions over and over again. Read, read and read some more - it has been answered many times.
again
Frend, my english is bad, so, for me is hard to find answer. why you problem to ask me. I new here. forum is very large. can you help me?
use google translate
edit: look at that! 2 mins of searching..
http://forum.xda-developers.com/showthread.php?t=1879364
giel123 said:
use google translate
edit: look at that! 2 mins of searching..
http://forum.xda-developers.com/showthread.php?t=1879364
Click to expand...
Click to collapse
Thank you very much! :good:
Use thank button. Ask a mod to close this thread.
Sent from my HTC Desire S using xda app-developers app
Skanob said:
Use thank button.
Click to expand...
Click to collapse
That's the other thing that is really starting to bug me with the majority of the newcomers round here
I'm not a thanks 'whore', but it really does get a bit of a pi$$-take when you help people out and get no thanks in return. Is it that much effort to press a button?
device info:
Sony Ericsson Xperia J
model #: St26i
android version: 4.1.2
build: 11.2.A.0.21
unlocked bootloader + rooted.
Hi. Just recently flashed ParanoidAndroid 3+ on my phone. But I am having some issues with it. The biggest issue was It seems I can't access to HYBRID SETTINGS. When I tried to apply some settings, it says reboot, I reboot, after reboot, nothing changes, nothing happened. I wanted to change the size/resolution because its too small but its not working. I am having a hard time hitting the options due to small fonts/resolution. 2nd issue was I can't send SMS because it says service not available.. What's wrong with my phone?:s Did I do something wrong upon installation with ParanoidAndroid?
Here are some screenshots of what I have been takling about:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it is not what i expect to look like. As you can see only the PA colors has a description.
see?its too small.
As you can see, the size setting is set to 0. which is too small. when i try to move the button to right to change size, it won't move :/
the system says, cant send SMS due to unavailable service..
I really hope someone would help me because Iwould really like to use ParanoidAndroid for my device :crying:
Post these problem in the ROM thread. The OP seems very active there, you will get quick answer there.
auni said:
Post these problem in the ROM thread. The OP seems very active there, you will get quick answer there.
Click to expand...
Click to collapse
Thanks for the advice. But sorry for this very noob question :| Where is exactly the ROM thread? I'm still kinda lost in this forum..
shael1992 said:
Thanks for the advice. But sorry for this very noob question :| Where is exactly the ROM thread? I'm still kinda lost in this forum..
Click to expand...
Click to collapse
Rom thread means, the thread from where you downloaded the ROM.
This is the one i believe.
http://forum.xda-developers.com/showthread.php?t=2229432
auni said:
Rom thread means, the thread from where you downloaded the ROM.
This is the one i believe.
http://forum.xda-developers.com/showthread.php?t=2229432
Click to expand...
Click to collapse
Oh I see.. Yes I downloaded it from that thread and followed the instructions from the thread.. Thanks again for the info :good: Now, I reposted it in there..
Hey all,
With the new 4.3 rollout for Note2, Samsung introduced many features and tweaks but they decreased the size of phone icon in Call log list.So I made a MOD by which you can increase its size according to your need.
Screeshot-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download-
Want to increase/decrease size your own?
Unzip the file and navigate to
Code:
X:\Contacts\contacts\vrtheme\system\app\SecContacts.apk\res\drawable-xxhdpi
Here you will see "log_list_call_btn.png". Resize it according to your need, zip it again and flash.
not successful in DN3.1.1
sumondhk1 said:
not successful in DN3.1.1
Click to expand...
Click to collapse
What error you getting?
BTW i tried this on Phoenix and its working fine but it will work with other roms too.
mannyvinny said:
What error you getting?
BTW i tried this on Phoenix and its working fine but it will work with other roms too.
Click to expand...
Click to collapse
Size remains same small as before
need help urgently
Hi manny I got a real problem
Firstly I am on dn3.1.1 rom and I flashed the contact.zip file
After phone reboots the contacts and call buttons disappeared from my phone
What should I do now
Should I flash the rom again !!!
Thanks for your help
mr.inspiration said:
Hi manny I got a real problem
Firstly I am on dn3.1.1 rom and I flashed the contact.zip file
After phone reboots the contacts and call buttons disappeared from my phone
What should I do now
Should I flash the rom again !!!
Thanks for your help
Click to expand...
Click to collapse
Don't flash the whole rom again instead push the original apk in system/app.
Sent from my GT-N7100 using XDA Premium 4 mobile app
sorry for stupid question but how to enable phone button in call list? Im on DN 3.1.1
Thanks so much working like a charm on Dn 3.1.1
Sent from my GT-N7100 using XDA Premium 4 mobile app
Had anyone tried this to flash in our device?
http://www.androidiani.com/forum/sa...ding/349999-rom-dirtydev-cm10-1-cm10-2-a.html
it has different kernel and had an update. It says 10.2 had low battery drain, i want to flash it but i cant understand thier language and i dont know if that rom support English language:laugh::good::angel:
Ask himhttp://forum.xda-developers.com/member.php?u=5660193&nocache=1&z=7802578343544155
Or translate from italian
ANDROID-000 said:
Had anyone tried this to flash in our device?
http://www.androidiani.com/forum/sa...ding/349999-rom-dirtydev-cm10-1-cm10-2-a.html
it has different kernel and had an update. It says 10.2 had low battery drain, i want to flash it but i cant understand thier language and i dont know if that rom support English language:laugh::good::angel:
Click to expand...
Click to collapse
It's cool. Try it ! It's a good rom, i think is better than the Viking cm10.2 because it is not a port, it is more optimized(has ION) etc ...
They do not want to release it on xda at the moment. They will do this when the rom and the team will be ready
smartandroidtech said:
It's cool. Try it ! It's a good rom, i think is better than the Viking cm10.2 because it is not a port, it is more optimized(has ION) etc ...
They do not want to release it on xda at the moment. They will do this when the rom and the team will be ready
Click to expand...
Click to collapse
Had you tried it? Or anyone tried it?
I'm running it now. 3hrs ain't much to give you some deeper insight in ROM. There is still same bluetooth problem, and camera status is same as in vicky's, third party app works fine.
If you don't want to go through hustle of redownloading your apps and connecting accounts, just do a backup in cwm of current ROM and when you flash new one, let it boot once, but don't set any accounts just chose to skip that. Once booted, reboot in recovery and chose advanced recovery, than recover only data and you should be fine. Tho if you use xposed you'll have to just activate it(install/update thing) and reboot. Don't try it if ROM versions aren't same, as in trying to restore data to CM10.2 from GB backup. It might work but it's better not to push it to much.
Btw offtopic question since somebody mentioned it, what is ION?
@MegaBoyX9 what else,i mean are there any other bugs?? and what about battery drain ??
So far batery is fine. Charged it to 100% last night, and left over night and it droped only 10%. I forgot to change governor so it was on ondemand with row and wifi was on entire time. Switched to intellidemand2 now to see how it'll be.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANDROID-000 said:
Had you tried it? Or anyone tried it?
Click to expand...
Click to collapse
I'm currently running this rom !
Hello i have a q about this bug or what is it so after i charge my phone sometimes there are portions of the display that wont respond to touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
something like that ... It hapend twice first time i dont know how i fix it ...any ideas
Sent from my Nexus S using xda a ppm developers app
rdk00 said:
Hello i have a q about this bug or what is it so after i charge my phone sometimes there are portions of the display that wont respond to touch View attachment 2610705 something like that ... It hapend twice first time i dont know how i fix it ...any ideas
Sent from my Nexus S using xda a ppm developers app
Click to expand...
Click to collapse
have the same issue a bit lower on my screen(broken digitizer) and it can be fixed only with a new display
Screen Tile Not respondig
Having the same issue here, as described above , but it only happened like 2 weeks ago tops , like when i updated to latest Kitkat (slimKat stable 3 back then )...
Is this definitely a hardware issue or some broken code?
Been reinstalling some kitkat here, but the problem persists,...
I thought the problem was the firmware because of some post i spotted pointing at slimkat or something...
Did any of you get this problem AFTER installing slimkat or even latest TWRP (2.7.0.0) ? (i updated both kind of the same time)
I had that problem on 4.1/2/3 roms. Disappeared on kitkat, fyi.
Sent from my Nexus 5 using Tapatalk
ej8989 said:
I had that problem on 4.1/2/3 roms. Disappeared on kitkat, fyi.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
thnx for reply,
it emits hope... which i needed for this phone...
weird issue though...
Do you mind to share your last working configuration ...?
Rom+kernel+recovery ...
that would be tremendous help...
I also noticed you ve hardbricked your Nexus s ... though..
Ic3_C0ld said:
thnx for reply,
it emits hope... which i needed for this phone...
weird issue though...
Do you mind to share your last working configuration ...?
Rom+kernel+recovery ...
that would be tremendous help...
I also noticed you ve hardbricked your Nexus s ... though..
Click to expand...
Click to collapse
ROM: euroskank cm11
Kernel: default
Recovery: TWRP
My phone was bricked because of a design flaw somewhere in the exynos chip. Samsung wants me to pay $200 for board replacement.