Related
I am not sure if this is the right section where to post this, but I didn't find any general software dedicated sections.
Mobile Tracking System is a complete solution for GSM and GPS tracking and for SMS or e-mail (push) messaging.
Some of the Mobile Tracking System features:
- displays on the mobile phone the current location (like Celltrack and the rest)
- displays on the mobile phone the information from the GPS receiver (geographical coordinates, speed)
- access the live reporting tools through a simple web page
- any user can send and receive text messages to and from any other MTS user no matter how long or how many there are
- any user can send and receive e-mail messages no matter how long or how many there are (currently only plain text supported)
- if the internet connection on your mobile device is not present you can use the built in local database system - however the live reporting tool will not work in this case. Also, if the internet connection is temporarely down, MTS automatically reverts to the local database system
- if two users (with previously configured settings) are in the same cell, the software will notify them
- you can stop server communication automatically when you are in some designated cells (for example, if you are home, you have little need for live tracking and thus gprs traffic will be spared). However note that the GPRS traffic is extremly small because only a few bytes are sent in each transaction
- you can specify how often your mobile device should communicate with the server
- MANY others
Notes:
- right now every feature mentioned above is free for any user that signs up. Registration is also free.
- the users that add the most cells will be rewarded
- the project is available with any GSM network from all over the world (if you don't see your network operator, please tell us and we will add it in a few moments).
- the project works with any GPS receiver with NMEA support
Requirements:
- mobile phone or pocket pc that runs Windows Mobile 2003 or 5
- internet connection available on your mobile device (if you don't meet this requirement, the local database will be used, however the live reporting features will not be available)
- GPS receivers are optional - MTS works perfectly without any GPS receiver. Also, if your device is not compatible with the GSM location feature, you can use only the GPS feature or if you don't have a GPS receiver or GSM location feature compatible phone, you can use only the messaging features
Screenshots:
http://www.fightersoft.ro/mts/screenshots.htm
Tracking report demo:
http://86.105.56.50/v015trkstargate
Satellite image demo:
http://86.105.56.50/v015satstargate
The tracking and satellite demos are generated from this page - http://www.fightersoft.ro/mts/services.html . Also, forum/blog signatures are available - such as this one - http://www.fightersoft.ro/sigs/stargate.png
Info and download:
http://www.fightersoft.ro/mts/index.htm
User feedback is always welcome and appreciated!
stargatesg1 said:
I am not sure if this is the right section where to post this, but I didn't find any general software dedicated sections.
Mobile Tracking System is a complete solution for GSM and GPS tracking and for SMS or e-mail (push) messaging.
Some of the Mobile Tracking System features:
- displays on the mobile phone the current location (like Celltrack and the rest)
- displays on the mobile phone the information from the GPS receiver (geographical coordinates, speed)
- access the live reporting tools through a simple web page
- any user can send and receive text messages to and from any other MTS user no matter how long or how many there are
- any user can send and receive e-mail messages no matter how long or how many there are (currently only plain text supported)
- if the internet connection on your mobile device is not present you can use the built in local database system - however the live reporting tool will not work in this case. Also, if the internet connection is temporarely down, MTS automatically reverts to the local database system
- if two users (with previously configured settings) are in the same cell, the software will notify them
- you can stop server communication automatically when you are in some designated cells (for example, if you are home, you have little need for live tracking and thus gprs traffic will be spared). However note that the GPRS traffic is extremly small because only a few bytes are sent in each transaction
- you can specify how often your mobile device should communicate with the server
- MANY others
Notes:
- right now every feature mentioned above is free for any user that signs up. Registration is also free.
- the users that add the most cells will be rewarded
- the project is available with any GSM network from all over the world (if you don't see your network operator, please tell us and we will add it in a few moments).
- the project works with any GPS receiver with NMEA support
Requirements:
- mobile phone or pocket pc that runs Windows Mobile 2003 or 5
- internet connection available on your mobile device (if you don't meet this requirement, the local database will be used, however the live reporting features will not be available)
- GPS receivers are optional - MTS works perfectly without any GPS receiver. Also, if your device is not compatible with the GSM location feature, you can use only the GPS feature or if you don't have a GPS receiver or GSM location feature compatible phone, you can use only the messaging features
Screenshots:
http://www.fightersoft.ro/mts/screenshots.htm
Tracking report demo:
http://86.105.56.50/v015trkstargate
Satellite image demo:
http://86.105.56.50/v015satstargate
The tracking and satellite demos are generated from this page - http://www.fightersoft.ro/mts/services.html . Also, forum/blog signatures are available - such as this one - http://www.fightersoft.ro/sigs/stargate.png
Info and download:
http://www.fightersoft.ro/mts/index.htm
User feedback is always welcome and appreciated!
Click to expand...
Click to collapse
does this actually work on the wizard yet? downloaded it last night, and cant get it to work at all....
Yes, starting with this version - 1.19 (launched a few hours ago) it does work with most of the pocket pc models.
This is the changeslog for 1.19:
- greatly increased the number of supported devices (virtually any Windows Mobile 2003 or newer smartphone or pocket pc should be compatible)
- fixed some minor bugs
Make sure that in Options - Settings - Hardware "COM Port (specify below)" and COM port 9 are selected.
stargatesg1 said:
Yes, starting with this version - 1.19 (launched a few hours ago) it does work with most of the pocket pc models.
This is the changeslog for 1.19:
- greatly increased the number of supported devices (virtually any Windows Mobile 2003 or newer smartphone or pocket pc should be compatible)
- fixed some minor bugs
Make sure that in Options - Settings - Hardware "COM Port (specify below)" and COM port 9 are selected.
Click to expand...
Click to collapse
Thanks, i will re-download it again and give it another go
woo hoo, works on the wizard!! except i cant register now, i guess the servers are down or something
Yes, the MTS server is down due to some ISP problems. It should be back up soon. Until then you can play around in offline mode (you can add or edit locations). To go to offline mode press Options - Settings - Work Offline.
are you sure all isp's report antenna the user is connected to ?
It's a matter of functionality. Without this information a cell phone can't work. All MTS does is to tap into the phone's memory if you will and get this information.
now that i have gotten registered and what not, i noticed a bug... and tried all different settings with the same result... But when working online it constantly drops my data connection and restarts it.... What i think is happening is this.. i am using Push Mail from an exchange server, so my data connection has to stay connected, when the connection drops the phone automatically restarts it to stay connected with the email. I think this program tries to disconnect the data connection after it recieves the data it needs from the server, after it disconnects it the phone restarts it... seems like it sends it into a loop
It shows nothing on my HTC TyTN.
It can't locate its database thinking that my MicroSD is mounted under \Storage Card directory, while the system settings clearly call its mount point as \Карта памяти (I have a Russian ROM). I wonder why you hardcoded the card mount point name if it can be retrieved from the system... Also note for me it's in Unicode or UTF-8.
shogunmark, MTS needs to disconnect from GPRS in order to get the LAC-CID combination. This only takes a few miliseconds. Granted, it's an inconvenience when trying to surf the net while MTS is on auto mode. Unfortunatly this is a "by-product" when getting the LAC-CID data and cannot be helped.
Lurker0, if you want to use another path, use a registry editor (such as RegeditSTG) and update the path in the smartdevice's registry at \HKEY_CURRENT_USER\MTS\mtsfolder.
Ok, I've corrected that. I also added my operator to their database manually. Still it shows nothing on the screen.
You mean it shows nothing when you press Refresh? Make sure that in Options - Settings - Hardware COM Port (specify below) and COM9 are selected.
Yes I mean it, and I have COM9 selected. It was selected by default, and also I tried other ports, incl. manual selection of COM9 again. Blank fields.
Ok then. Extract the files from this archive - http://www.fightersoft.ro/uploads/mts_debug.zip anywhere in your smartdevice and run mts_debug.exe. Select port 9 and press Refresh.
Note: before pressing refresh, make sure that you are not connected to the internet via GPRS (check that the G character is NOT present near the signal strength indicator).
Let me know what the greyed textbox says (if it says anything at all).
Tried it:
MTS_debug.exe
CommPortException
CreateFile Failed: 55
Application::Run+0xf
Form1::Main+0xa
If it matters, I have .NET Compact Framework 2.0SP1 intalled (or whatever is the latest version).
GPRS was off. BT/Wi-Fi off as well. Launched just after a soft reset.
I see. It looks like it can't open the port itself. Do you happen to know what COM port is used by the builtin GSM modem in your PPC? Perhaps the product documentation will reveal that. In either case, try different ports (including 0). If none is working the only logical conclusion is that either the GSM modem is in use or there is no GSM modem installed. Let me know if you have any luck.
At the same time try to setup your PPC to work as a modem for your PC (so that the PPC will be available as a modem in Control Panel - Phone and Modem Options). Click on the PPC modem (in the Modems tab) and press properties. If it responds to Diagnostics - Query Modem then launch mts_debug.exe FROM the DESKTOP PC (not the PPC itself) and use the port from Control Panel - Phone and Modem Options - the selected device. Let me know what happens.
Oh, no! I don't need it as much! I'll better wait for a working version.
The ideea was that without knowing how your device works with the mts_debug application, I will never be able to create a working version.
You see, I just installed phoneAlarm, and it showed me Cell IDs w/o asking for a COM port with GPRS enabled. You're on the wrong way as it seems to me. At least for me your approach is useless and inacceptable.
Hi xda, my buddy and I just released a totally redesigned version of our app, NetTech, and we'd love to get feedback from xda.
Some of the features include:
-On a wireless connection: public ip, internal ip, MAC address, subnet address, broadcast ip, DNS entries, the SSID and MAC address of the router you are connected to as well as your signal strength.
-On a mobile connection: public ip, internal ip, phone type, network type, and signal strength.
-On both wireless and mobile you are able to run ping tests and speed tests against Google.
-Google Map interface showing your location along with the nearest cell tower that you are connected to or the location of your IP address if you are on WiFi
-Ability to take a snapshot your current network configuration (WIFI only) and be able to compare configurations at different locations. For example, you can take a snapshot at home and a snapshot at work and compare the two network environments!
-(NEW) WiFi Scanner that allows you to see wireless networks available in your area, including various information about the networks in range
-(NEW) New interface designed to improve the user experience of the app
-(NEW) More mobile information and WiFi information has been added
Both our free and full versions include the same feature set, the only difference is that the free version is ad supported.
You can find the full version here:
https://play.google.com/store/apps/details?id=com.crypticapps.nettech
You can find the lite version here:
https://play.google.com/store/apps/details?id=com.crypticapps.nettech_lite
Any feedback would be awesome! Thanks guys!
Seems awesome, what would you say are the benefits over WiFi analyser?
sabret00the said:
Seems awesome, what would you say are the benefits over WiFi analyser?
Click to expand...
Click to collapse
Hey, so it appears that Wifi Analyzer is doing a lot of the same stuff we are, but we are doing all the same things for mobile as well, which doesn't seem like the case for Wifi Analyzer. Also, we do provide Google Maps of your Wifi location and mobile cell tower as well. Our snapshot feature also shows you exactly where snapshots were taken using Google Maps, so that's also a handy feature.
I thought it sounded cool enough to check out. There a few design issues like a lack of spacing or odd buttons. Also kept crashing on the network location but seems it'll be a cool app. Definitely one I'll keep an eye on.
RantCell application is a true network benchmark tool to measure the key performance indicators (KPI) such as data speed, voice calls, ping (latency) ,dropped calls of 2G,3G ,4G ,Wi-Fi and CDMA phone network by performing repetitive speedtest ,ping (latency) and voice calls.
Features
• Only android app in the world to transform your smart phone into network test tool.
• Perform outdoor drive tests and indoor tests with RantCell app
• Perform long repetitive speedtest to get average values on of 2G,3G ,4G ,Wi-Fi and CDMA
• FTP download and upload for speedtest
• Everything about your network coverage, performance ,signal quality and data speeds.
• Tests download speed (downlink), upload speed (uplink), packet drops, round-trip delay time(RTT) values and latency
• Two data units in kbps, Mbps
• Performs voice calls to get the call setup success rates % (Dropped call) and setup time.
• Perform long repetitive ping test and voice call test
• Vital information about the test IP address, operator name, connection type, signal strength (RSSI), MNC, MCC, Cell ID (CID), LAC and PSC
• Information about signal strength RSRP, RSRQ and Physical cell ID (PCI) for 4G
• Finds location of the device (Latitude, Longitude) and also can find where you did tests.
• Ability to customize time interval between tests, the number of FTP connections and number of iterations.
• Detailed information about the tests (measured value of download/upload/ping, connection type and call status)
• Logs maps information while running tests
• Test results shown on graphical UI
• Maintains history of test results data.
• Perform post analysis by export of test result and share results in csv format (Requires In app purchase)
• Identify areas with coverage issues and dropped calls.
• Perfect android app for test automation of speedtest, latency and call test.
• Percentage of call setup success and average data speed can be measured.
• Capable of identifying dropped calls through test automation.
• All vital information such as signal strength, coverage, Cell ID and operator name is captured in the background while tests are progressing on the RantCell app.
Use Cases:
• As a field test tool for speed test and benchmark cellular net.
• Identify ping (latency) on GSM, UMTS, LTE, Wi-Fi and CDMA
• App can be installed on multiple devices and use it as a load generator.
• Identify phone congestion issues by running long iterations test campaign (Load Generator)
• Comparison of performance (KPI) with other operators for example Vodafone, EE, 02 (With multiple devices)
• Validation of services on cellular net.
• To get phone coverage information
• Configure your own FTP server to get more accurate measurements.
Download our android app from google play store, test your network, and if you like it please share our app.
I recently faced a nasty problem with my device, I had to keep on re-entering the Wi-Fi key of a specific hotspot even if I had managed to connect successfully on previous attempts.
Also as I leave the Wi-Fi on most of the times, I started to get a bit uncomfortable when the device connected by itself to an Open Network (one of the many around my place) and got notifications (Adverticements).
I am sure I had connected before to that Open Network but did not bother to 'forget' it.
As a result, I created this app which helped me resolve the next problems:
a. Having to re-enter the Wi-Fi of certain hotspots by removing all instances of the same secured network that may have been mis-configured.
b. Slow loading time of Wi-Fi settings by maintaining a shorter list of configured networks.
c. Automatically forget Open Networks.
d. Assign a friendly name to a network (while being displayed in this app).
e. Assign a friendly name to a hotspot (BBSID) of a network (while being displayed in this app).
f. Automatically restrict connection to a specific BBSID (Further changes are planned to restrict the connection to a set of BBSIDs, this is still experimental).
As an overall,
this app offers the possibility to forget (remove them from the configured list) Wi-Fi Networks (Open, Secured) from your device in a convenient way:
- Assign a friendly name to a network (and its hostspots - BSSIDs) (Touch the 'Name' label of the network).
- Display the signal level of a network (and its hotspots - BSSIDs) and be able to connect to it (Touch the 'Signal Level' indicator of the network).
Also it is possible to explicitly connect to a hotspot for a network (restricts any automatic connections to this specific BBSID).
[Experimental] Connection can also be restricted to a set of BBSIDs.
- Forget manually selected Secured Networks/Open Networks with a few clicks (Favorites are excluded).
- Automatically forget Open Networks when not in use (Favorites are excluded).
- Mark a Network as 'Favorite' so that is not forgotten by mistake either manually or automatically.
- Show a Notification if the Wi-Fi is on but no connection yet.
This is the Google play link:
https://play.google.com/store/apps/details?id=cs.anddev.wificleanup&hl=en
No root access required.
Permissions Explanation:
- Connect and disconnect from Wi-Fi. Needed to get the Wi-Fi status.
- View network connections. Needed to get the status of a Wi-Fi connection.
- View Wi-Fi connections. Needed to get the list of Wi-Fi connections.
- Run at startup. Needed to get the Wi-Fi connection status without running the app.
Changes for v.3.0:
- Show a Notification if the Wi-Fi is on but no connection yet.
- Assign Friendly name to a hotspot (BBSID) of a network (Touch the 'Name' label of the network).
- Display the signal level of a network hotspots and be able to connect to any of them (restricts any automatic connections to this specific BBSID). Further changes are planned to restrict the connection to a set of BBSIDs. This is still experimental and can be used once it is enabled from the Settings menu.
- Access Wi-Fi settings
- UI changes
Wi-Fi CleanUp v.1.1
Hi all,
new version is out (v.1.1) with the next added functionality:
- Automatically forget Open Networks when not in use (Favorites are excluded).
- Mark a Network as 'Favorite' so that is not forgotten by mistake either manually or automatically.
Enjoy
Chris
Wi-Fi CleanUp v.2.0
Hi all,
new version is out with the next added functionality:
- (v.2.0) Assign Friendly name to a network (Touch the 'Name' label of the network).
- (v.2.0) Display the signal level of a network and be able to connect to it (Touch the 'Signal Level' indicator of the network).
Also bug fixes and UI changes.
Enjoy
Chris
Would you be willing to pick up where Wi-Fi Ruler left off? I've emailed the author, with no luck, several times to ask if he can help me troubleshoot whether its my phone (SM-G920T) or his app that needs tweaking. Basically, his app allows us to rank what SSIDs are more desirable (in our eyes), and is *supposed* to allow us to use BSSIDs to make choices. Prime example: "xfinitywifi" is all over the country now, but I only want to connect to the 'xfinitywifi' signal in one location, not everywhere. I can't tell if his app is working perfectly, but it's my Samsung GS6 (5.1.1) that keeps usurping the app because it only knows that I "remembered" xfinitywifi once, so I must want to connect to it everywhere and anywhere.
Where to find the app? Link? Am I blind? Can't find...
great
@bwb8771
Sounds interesting idea, let me do some investigation and I will revert. @Technical
This is the Google play link
https://play.google.com/store/apps/details?id=cs.anddev.wificleanup&hl=en
Hi bwb8771
I am in the process of making a prototype as a proof of concept, will you be willing to test it for me?
If yes, pm me an email to send you the apk.
Thanks
Technical said:
Where to find the app? Link? Am I blind? Can't find...
Click to expand...
Click to collapse
me too, cannot find it..
I have added on the first post the Google play link.
chrisstavrou said:
I have added on the first post the Google play link.
Click to expand...
Click to collapse
great
Wi-Fi CleanUp v.3.0
Hi all,
new version is out with the next added functionality:
- Show a Notification if the Wi-Fi is on but no connection yet.
- Assign Friendly name to a hotspot (BBSID) of a network (Touch the 'Name' label of the network).
- Display the signal level of a network hotspots and be able to connect to any of them (restricts any automatic connections to this specific BBSID). Further changes are planned to restrict the connection to a set of BBSIDs. This is still experimental and can be used once it is enabled from the Settings menu.
- Access Wi-Fi settings
- UI changes
Enjoy
Chris
WiFi Companion, a new way to manage your WiFi.
WiFi Companion switches your WiFi in a smart way by turning it on only when is needed in order to save battery. You can set when and where your WiFi turns on or turns off, how often it connects, at what time or even which days. It is all up to you.
Additionally, it records relevant information of every network you use so now you will not wonder where this "default" network is located, or when was the last time you used it. For every network you use, WiFi Companion (privately in your phone) stores:
- Name of the network.
- BSSID.
- Last IP address.
- Maximum speed reached.
- Precise location. This location is determined once per each network and uses GPS if available, so you can see its location on a map. You can also manually set its location.
- Last time of connection/disconnection.
In addition, for each network you can:
- Set a label to help you recognize it later.
- Set a password reminder, or even the password itself if you want it. Since Android doesn’t let you see passwords once you set them, now you can use them later or share them with someone else.
- Enable location optimization. Some networks are not related to cell towers location, such as mobile access points, so you can ignore them while searching nearby networks.
- Save map location. Here you can choose if you want to save the network precise location on a map.
- Control master synchronization based on the current network. Useful for limiting data transmission over insecure or non-trusted networks.
WiFi Companion provides a notification that shows you when your WiFi is turned on, so now you can easily check when you are wasting battery by not being connected. It also shows current network name, IP address and last time of connection/disconnection.
Play Store