Since USB jig doesn't work exactly the same way on our SGR compared to SGS II, I recommend an alternative solution.
How to make jig work?
1) Entering the Download mode:
pull the battery out -> plug jig -> insert the battery
or
turn off device -> plug jig -> press power button
2) Resetting the download counter:
Enter DM using one of those two methods above. Once you're there just remove jig, plug usb-cable and install your stock kernel (just to reset the counter) or firmware (in case you want to reset the counter and unroot simultaneously). Right after installation process is started you should see the green text: Success to erasing the record of custom OS! (You can see it on attached picture.)
Remember:
1) This method works only on DM Protocol Version 2.0, for those of you that have v. 2.1 USB jig won't work at all. In your case procedure is more complex, please visit this thread:http://forum.xda-developers.com/showthread.php?t=1528256
2)You don't have to flash the whole fw-package to reset the counter. It's ok with just stock kernel (only the .tar file though and remember that replacing the kernel WON'T UNROOT your device. To unroot and clear the counter you should reinstall your stock firmware!)
I attached some stock kernels. Please don't ask me to add more. First of all I don't have them and second... you can easily get your own by replacing boot.img from one of the tar-packages below with the original one from your preferred firmware. (USE Total Commander, don't extract packages, simply open them with [ENTER] and copy file from one package to another (F5))
I am trying the second method (insert jig and press power botton), not working. After flashing custom ROM (kernel), it simply reboots as expected (should I disable reboot option in ODIN?).
Would appreciate if someone suggests how to do it right.
Excuse me, but can you write step by step what you did. You cannot enter Download Mode? Or you entered DM and flashed FW but it didn't reset your counter?
Make sure that USB-debugging is checked.
1)enter DM with USB jig
2)remove jig
3)plug usb cable and flash STOCK firmware
It has always worked for me that way.
(Maybe I misunderstood you but...why should you disable auto-reboot option in Odin. Flashing custom kernels increases counter and it has nothing to do with the method I posted above. IT's actually totally opposite. This method is only useful if you just want to erase flashing record, but it won't let you have insecure kernel and 0 on counter.)
m.kochan10 said:
Excuse me, but can you write step by step what you did. You cannot enter Download Mode? Or you entered DM and flashed FW but it didn't reset your counter?
Make sure that USB-debugging is checked.
1)enter DM with USB jig
2)remove jig
3)plug usb cable and flash STOCK firmware
It has always worked for me that way.
(Maybe I misunderstood you but...why should you disable auto-reboot option in Odin. Flashing custom kernels increases counter and it has nothing to do with the method I posted above. IT's actually totally opposite. This method is only useful if you just want to erase flashing record, but it won't let you have insecure kernel and 0 on counter.)
Click to expand...
Click to collapse
I put USB jig in, pressed power button, phone went to download mode.
Tried uploading custom kernel, it wasn't doing the trick. However as you suggested, installing stock ROM worked! But thats quite weird as in SGS2 it works just by inserting the jig.
I agree it's weird
Hello.
I don't want to be off topic but, I would like to ask you when you flashed 2.3.6 from 2.3.4 or 2.3.5 , did your download counter increase?
Of course not it never increases when you flash stock firmware. Only if you flash custom software (with the exception of custom recovery like cwm) via Odin e.g. insecure kernels, custom roms etc.
Sent from my GT-I9103 using XDA App
hey kochan could you shed the goodie on where you get the stock 2.3.4 rom? i tried legion's stock KK5 without getting the magic green words on my screen after the the install kicked start... *frustrated*
I'm flashed 2.3.6 and this tutorial works just fine.
I did the same two days ago with 2.3.6, and everything worked as it was supposed to again. So you must check the jig.
okay.. i got a new jig from the guy, USB debugging checked, tried both methods with ZSKK5 on PDA flashed without luck... argh this is pissing me off what have I done wrong!!!
s4sixty, kochan, did you both flash the stock rom off a custom rom to clear the counter? i have tried dozens time from stock to stock. the only thing i suspect that went wrong was when i enter download mode after jigged, i m always coming from stock-to-stock flash. would that be the case?
guess i m luck out. i m trying different cable to see whether things get better... argh
Tell me: how many custom flashings do you actually have on the counter? What's the number?
i got three bro... would that be the case that i m flash-jigging from a stock to stock rom that's why i m luck out? i m trying different cable.
Ok, number is actually out of relevance (if it's different than 0). Maybe it has something to do with the cable. I thought that flashing FW rewrites bootloader (because it's inside the .tar package). So it shouldn't have major significance here since u used both 2.3.4 and 2.3.6.
You know the only thing that has to be done to succeed is to boot into Download Mode with the help of USB jig (NOT WITH 3buttons combination), then remove jig (DO NOT RESTART) and plug in usb cable directly, then just chose your firmware and press start in Odin. (I always close Kies and all processes related to it before I started any operation in Odin) It has always worked on my device. I have no idea why it doesn't work for you.
Moodaleon said:
s4sixty, kochan, did you both flash the stock rom off a custom rom to clear the counter? i have tried dozens time from stock to stock. the only thing i suspect that went wrong was when i enter download mode after jigged, i m always coming from stock-to-stock flash. would that be the case?
Click to expand...
Click to collapse
It doesn't matter dude when custom roms are installed via CWM and not Odin. I have almost always reflashed from stock to stock. But maybe...I'm not sure but it doesn't harm to start....try to flash stock again, then flash custom kernel, and then turn off mobile, insert usb jig, press and hold power button, u should boot directly into DM, then remove jig -> plug usb cable and ref lash directly. If this doesn't work, then try to find somebody with galaxy R and try the methods i posted on other handset just to make sure if it's hw-related.
yea im totally beat from jigging my SGR these couple days. ah well i guess it is time to fall to the dark side and tune the phone to a no-beater! thanks for the coaching kochan
m.kochan10 said:
Enter DM using one of those two methods above. Once you're there just remove jig, plug usb-cable and install your firmware (I've tested both 2.3.4 and 2.3.6). Right after installation process is started you should see the green text: Success to erasing the record of custom OS! (You can see it on attached picture.)
Click to expand...
Click to collapse
I've tested with 2.3.5 and works perfectly.
Best regards,
Siwy ;-)
Hi m.kochan10, can I know more about using the USB jig?
As you mentioned, after booting up using the jig, I need to unplug it and then plugin my USB cable to flash stock ROM thru Odin3. By means of stock ROM, you mean only the factoryfs.img? or the whole things including boot.img, cache.img, factoryfs.img, hidden.img, modem.bin & recovery.img?
Thanks a lot
ardatdat said:
Hi m.kochan10, can I know more about using the USB jig?
As you mentioned, after booting up using the jig, I need to unplug it and then plugin my USB cable to flash stock ROM thru Odin3.
Click to expand...
Click to collapse
Exactly!
ardatdat said:
By means of stock ROM, you mean only the factoryfs.img? or the whole things including boot.img, cache.img, factoryfs.img, hidden.img, modem.bin & recovery.img?
Thanks a lot
Click to expand...
Click to collapse
Ardatdat I'm sorry but in order to reset the counter I have always flashed the whole tar-package that included all those parts you mentioned.
Though...it's worth to test since counter gets erased immediately after installation process is started, so perhaps it can be concluded that...the first part that is being installed is responsible for resetting the number of custom flashings.
I'll try to test it today.
EDIT: IT's boot.img that makes a difference So Ardatdat...take your old .tar file and simply replace your kernel with the stock one, run Odin3 and voila No need to flash the whole FW!
I am thinking of getting an USB Jig and keeping it, just in case (rather than ordering one when needed and waiting for it, till I get it ).
I went through the FAQ's for USB Jigs in this forum. I got an SGR, and from that FAQ what USB Jig is shouldnt be specific for SGS II or SGR. Can you please confirm this before I get one as there were only couple of sellers with I9103 mentioned and most of them had mentioned I9100 specifically.
Thanks.
USB Jig is the same for every samsung device! Just the way it works, differs. On SGS it boots into download mode, removes the triangle and resets the counter right after you inserted it to your phone. On SGR it does each of those things above but not equally automatically. It works and it works effectively, but we have to insert jig, press power button and fe. reflash the stock kernel to get the same effect. No need to worry.
PS. It's so cheap so don't hesitate to buy it!
Related
Today my Samsung galaxy R i9103 turned into brick..
My phone have been rooted following this thread: http://forum.xda-developers.com/showthread.php?t=1406880 for 5 months and worked well until today
I can't turn on my phone trying all the methods..like taking off the battery and putting it on, removing my SIM and microSD card, pressing volume-+home button+power button...
But the notebook recognizes it as APX when I plug it in
Later, I installed something like a NVIDIA driver
I have found a .bat on other forum, run it and can get into odin 3 download mode now
Under the title(Odin 3 download mode protocol v2), it writes
Reason: No Kernal
Check Signature: Check
Custom Binary Download: No (0 Counts)
Current Binary: Samsung Official
Waitting USB Cable...
and I don't have any other options even rebooting my phone as it just shows me the same page.
1. With this situation, can I simply flash the original ROM using Odin? (someone said it is likely to be a hardware problem but not a software one)
2. Will Samsung know that my phone is rooted and refuse to fix it if I sent it to them ?
3. If yes, will flashing to the original ROM before sending it to them work?
4. Is there any way that I can fix the phone without losing my data inside?
Thanks so much!!!
Your counter is '0' so I think Samsung shouldn't be able to tell you that it was rooted but if they as a policy don't accept handsets in APX mode then we can't be sure about what would be their response.
But did you try your luck with the following method ?
http://forum.xda-developers.com/showthread.php?t=1528256
'cooleagle' said:
Your counter is '0' so I think Samsung shouldn't be able to tell you that it was rooted but if they as a policy don't accept handsets in APX mode then we can't be sure about what would be their response.
But did you try your luck with the following method ?
http://forum.xda-developers.com/showthread.php?t=1528256
Click to expand...
Click to collapse
Just the same thing as what I have used
Do you know will I still have my data inside after I flash the original rom again?
And what about the counter, will it increase?
Anyway, thanks
1.Yes. You can Flash a stock ROM in the download mode.
2. If you flash a stock ROM, your download counter will not increase and Samsung will not know you played around with your device.
If you flash some insecure kernel (modified ROMs) via ODIN then counter will increase.
3. You dont have to flash if wanna send them to repair. You are very safe to send it to repair as it is.
4.What ROM version were u on before? Determine that first and try to flash the the boot kernel and see whether u can make it work?
If no luck you can flash a full ROM. You SDcard/usbstorage files will not be deleted. Only the system partition is going to be modified.
leon090807 said:
Today my Samsung galaxy R i9103 turned into brick..
My phone have been rooted following this thread: http://forum.xda-developers.com/showthread.php?t=1406880 for 5 months and worked well until today
I can't turn on my phone trying all the methods..like taking off the battery and putting it on, removing my SIM and microSD card, pressing volume-+home button+power button...
But the notebook recognizes it as APX when I plug it in
Later, I installed something like a NVIDIA driver
I have found a .bat on other forum, run it and can get into odin 3 download mode now
Under the title(Odin 3 download mode protocol v2), it writes
Reason: No Kernal
Check Signature: Check
Custom Binary Download: No (0 Counts)
Current Binary: Samsung Official
Waitting USB Cable...
and I don't have any other options even rebooting my phone as it just shows me the same page.
1. With this situation, can I simply flash the original ROM using Odin? (someone said it is likely to be a hardware problem but not a software one)
2. Will Samsung know that my phone is rooted and refuse to fix it if I sent it to them ?
3. If yes, will flashing to the original ROM before sending it to them work?
4. Is there any way that I can fix the phone without losing my data inside?
Thanks so much!!!
Click to expand...
Click to collapse
Thanks.
I flashed the stock ROM with re-partition and need to wipe all my data to get it working...
if not, it will stuck in a rebooting loop
Do you think it is likely to be caused by rooting?
Or it's a bug which will bring down the whole system?
leon090807 said:
Thanks.
I flashed the stock ROM with re-partition and need to wipe all my data to get it working...
if not, it will stuck in a rebooting loop
Do you think it is likely to be caused by rooting?
Or it's a bug which will bring down the whole system?
Click to expand...
Click to collapse
NOOOO... re-partition needs to be "UNCHECKED"... i.e. there shouldn't be any tick in the box of re-partition...
sagarwadhwa1 said:
NOOOO... re-partition needs to be "UNCHECKED"... i.e. there shouldn't be any tick in the box of re-partition...
Click to expand...
Click to collapse
there's a PIT doc and people on the internet says it needs to undergo re-partition or else there will be error
Did you re-partition you system? You can try the stock boot kernel if you dint repartition/ wipe.
leon090807 said:
Thanks.
I flashed the stock ROM with re-partition and need to wipe all my data to get it working...
if not, it will stuck in a rebooting loop
Do you think it is likely to be caused by rooting?
Or it's a bug which will bring down the whole system?
Click to expand...
Click to collapse
I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug
So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.
I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I've spent weeks surfing the forums trying to get past the common recovery file rename and replacement with a system manager that is in super user mode etc. I don't know if it's the particular version of the recovery file that I've replaced being bad, but the first time I was soft bricked I was able to physically reset with a guitar wire in that whole ( was weird cuz it seemed like the button wasn't going to work cuz after minutes of turning the phone on and off it just randomly worked) Let me explain better because after chosing a different recovery file it soft bricked again however the reset isnt working. Ok so if I have USB cable in it brings up charging battery logo (showing the battery as dead which isnt true because the time it did reset... when it worked, the icon illuminated green suddenly. If the USB isnt connected upon turn on the samsung comes on indefinitely (forever)... tried with sim in & out etc. If I reset into download mode it just says downloading (let it go for three hours before stopping it once). Ive installed odin and tried to fix it that way... I made a Jig with 3X100k resistors and 1 1ohm 1watt ..( attempting to get the 301k resistance between the 4th and 5th pin in the micro usb connection... Didn't work ( used a voltmeter to test the jig but I didn't know what the reading should be but I saw a difference ( thougt the 1 watt addition was messing it up so I omitted that resistor. Still didnt work.... guess I could splurge and buy a jig online as a back up if I cant beat it differently. Lastly and more promising was downloading ADB and getting it running correctly... at first because of the inability to adjust bugging or not the device wasnt recognized... miraculously I left it alone andcame back and tried it... device is recognized... tried to adb pull recovery.orig file to C: to rename and push back but I didn't see it on the PC to rename after Adb says the pull file command was done. Thanks for your patience with all this info on first message. Im new to this. Im sad that I have to get into this just to take control bake but there is a user and or group that is runing in my background and changing my permissions and running so many processes its like slow motion. doing this so I can run the roms to control my traffic and get some Ram back... I wish I could just ask him to please stop. Thank you for any help.
If I reset into download mode it just says downloading (let it go for three hours before stopping it once)
Click to expand...
Click to collapse
What exactly are you doing with it when you have it in download mode? If you can get into DL mode already, what's the point of the jig?
What was the exact procedure you used with Odin, and at what point did the flash fail? Maybe I'm missing something in that wall of text, but it seems like, if Odin isn't working for you, you could always try to Heimdall back to stock and then flash a kernel & CWM one-click installer.
http://forum.xda-developers.com/showthread.php?t=1629079&highlight=uclb3
BTW, please separate your paragraphs. One big block of text is kind of a pain in the ass to read through.
Odin
ApexPredatorBoids said:
What exactly are you doing with it when you have it in download mode? If you can get into DL mode already, what's the point of the jig?
What was the exact procedure you used with Odin, and at what point did the flash fail? Maybe I'm missing something in that wall of text, but it seems like, if Odin isn't working for you, you could always try to Heimdall back to stock and then flash a kernel & CWM one-click installer.
http://forum.xda-developers.com/showthread.php?t=1629079&highlight=uclb3
BTW, please separate your paragraphs. One big block of text is kind of a pain in the ass to read through.
Click to expand...
Click to collapse
Odin wasn't recognizing the device before at all, but since I set up ADB and ran the adb sync comand, now when I run Odin it recognizes the device as com5 not com++ (not sure if that matters). I'll try and start a pit and see what happens.
If I went back to stock what kernel do you recomend I flash and do you know a good recovery file to replace the original one to get past the signature verification when reinstalling packets.
Flash entropy's dd kernel. There is no need to replace any recovery file in GB (that's only on froyo).
Sent from my sweet & buttery Infuse
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
pistol865 said:
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
Click to expand...
Click to collapse
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
bhundven said:
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
Click to expand...
Click to collapse
Thank you so much for getting back to me. A couple of questions if I may?
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
pistol865 said:
Thank you so much for getting back to me. A couple of questions if I may?
Click to expand...
Click to collapse
Well, seeming it is the Q&A forum
pistol865 said:
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
Click to expand...
Click to collapse
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
pistol865 said:
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
Click to expand...
Click to collapse
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
pistol865 said:
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
Click to expand...
Click to collapse
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
bhundven said:
Well, seeming it is the Q&A forum
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
Click to expand...
Click to collapse
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
pistol865 said:
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
Click to expand...
Click to collapse
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
bhundven said:
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
Click to expand...
Click to collapse
Ran into a new problem now...
It's me again... Sorry if I'm being a pain..
So I downloaded the link.. I have it on my desktop...I put my phone into download mode..(Yellow Triangle> Do not unplug).. I clicked on your OneClick... it loads but then tells me to connect my device... It keeps telling me I'm disconnected..
When I plug my phone into my compt via USB.. it now tells me that my device is unrecognized.
Now what did I do wrong?
I was hoping I was close to a resolution... another roadblock.
Can I fix it?
Once again, thank you for any and all the help and advice you have given me.
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
limeaide said:
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
Click to expand...
Click to collapse
I already installed usbDview.. ran as admisistrator... removed anything that said samsung or android.. plugged in my samsung phone and Still is not recognized. Also downloaded Zadig.. to install the drivers to the phone.. but it doesn't recognize the phone.
Anything else that I'm missing? Can I download something online so that when i plug in via USB it will recognize my phone?
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Tried different usb ports as well as a different computer.. When I hoked up to a different computer, at first it said it was installing the drivers.. then it stopped and said USB device Unrecognized.
Is it a matter of drivers? Can I get them offline? and then plug in my phone?
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Computer pop up says: usb device has malfunctioned and windows does not recognize it.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
I just went to the samsung website and downloaded the drivers from there.. Still having the same problem... usb device has malfunctioned and windows does not recognize it.
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
ALMOST THERE.. I think..lol
I think I successfully ran the program.. phone turns on now.. Yayyy...
New Problem:
The screen now says:NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED
The SIM card is already installed... the phone is not recognizing it now.
What now??
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
One more thing, I installed Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)... That should mean the phone is rooted.. correct? although I don't see SUPERUSER in my apps list.. Also does this have CWM installed? Can I flash a custom rom moving forward?? If so which one do you consider the best? I originally was having trouble because I was running into low internal memory and couldn't download many apps. That's why I wanted to flash BLACK ICE originally.. I thought that would fix my problem..
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
limeaide said:
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
Click to expand...
Click to collapse
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
pistol865 said:
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
Click to expand...
Click to collapse
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
bhundven said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
Click to expand...
Click to collapse
No..no.. I'll definitely take your word for it.. I'll stick with the blue. I just thought that with the lagfix, it would fix my problem with internal memory.
My problem now is my SIM card.. The phone reboots and I get : NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED]
I did as you said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Should I still install: download blastoff v2.5?
Thank you again for ALL your help.. You guys saved my phone..
Hello community,
I regulary use some custom or stock firmware for my Samasung phones for several years (since My first Galaxy S1 !)
I love refurbirsh old phones withh new relases of android when operators and Samsung stop maintenance. I Limit my experimentation to last stock roms from Sammobile or CyanogeneMod/LineageOS wihth open Gapps.
Last days it was my galaxy S7's turn, to give it to my daughter : New battery,new back cover and new ROM.
My goal was to install Android 9/lineageOS 16 herolte version from operator stock rom.
First try : install TWRP with adb and linux heimdall. Tricky part was to reboot in recovery mode before it is overwritten by stock rom.
Not so easy without battery removal. Result, I ended in boot loop because of crypted data partition. First mistake.
2nd try : Format system and data via TWRP install lieageos zip and nano Gapps. Worked OK.
BUT, impossible to power off the phone. Only reboot was possible even power off with TWRP.
Not happy with this.
3rd try : reinstall last stock Firmware from sammobile via Odin. Process successfull reboot OK. Minimal configuration to check all is working as expected.
4th try : Install TWRP via Odin. Process Successfull but haven't succeed to get Recovery mode befor normal boot.
Then things became bad : After boot to welcome screen (with the hour and notifications), phone became completly stuck. No touchscreen or button responsive.
I forced reboot with volume down + power.
And I fell into the green screen of death with the error message "emergency recover".
Since then I can still boot in download mode and Odin detect the phone correctly, but impossible to write anything back in the phone.
after clicking start button, Odin failed with timeout either at the begining, or at system.img from stock rom.
I have tried others USB cables, Other releases of Odin, others stock roms.
I although tried repart with PIT file, even "erase all" option. But Nothing else than timeouts, and reboots in green screen of death.
I'm afraid internal memory has been definitiveley corrupted.
I ended up with reopen the phone and remove battery to keep it safe.
Before I seek for another motherboard, I ask here if there is something else to try.
Thanks for your help.
Yes
1. Reinstall drivers
2. Try new Odin version
3. flash latest available stock firmware for your region.
4. Try to Run Odin with Administrator rights
5. Flash 4 file firmware
6. Flash one by one file firmware
7. Extract boot, kernel and recovery files from stock firmware and flash one by one, then do full firmware flash...
If can go to download mode can reflash stock firmware with odin.
Teddy Lo said:
Yes
1. Reinstall drivers
2. Try new Odin version
3. flash latest available stock firmware for your region.
4. Try to Run Odin with Administrator rights
5. Flash 4 file firmware
6. Flash one by one file firmware
7. Extract boot, kernel and recovery files from stock firmware and flash one by one, then do full firmware flash...
Click to expand...
Click to collapse
Which version of MS Windos? I have tried windows 7, and 10 neither worked!
What drivers?
I have tried 3.14.1, 3.14.4 - neither worked!
1. Samsung drivers :
Samsung_USB_Driver_v1.7.48.0.zip
drive.google.com
2. Latest stock firmware by using your full model name, and region for your device otherwhise it will fail all the time...
Latest stock firmware by using your full model name, and region for your device otherwhise it will fail all the time...
Hi thank you for suggestions. I have prepared flash with heimdall by untar unlzm4 the imgs. But something went wrong maybe by unplug the battery. The phone never woke up.
Use multimater and check battery voltage it must be minimum 3.8v to boot up.... Since you messed up your bootloader you wont be able to charge your phone most likely. So you need then or buy new battery or charge manually direct...
Here is example:
Red wire is +
Black Wire is -
on your battery
See picture where is + and where -
Once you are Successfully charge your battery, put your phone into the Download mode Vol+ / Home /Power button, etc...
Good luck
Hi, I'm back with some more news. I've tried th above solution, Test battery with multimeter showed me 1V. I then tried to charge the battery. Tricky part was to stick the wire on such small pins. Anyway It sort of worked as I could measure 3.8V after charging
But bad luck, the phone still doesn't want to power up.
didou691 said:
Hi, I'm back with some more news. I've tried th above solution, Test battery with multimeter showed me 1V. I then tried to charge the battery. Tricky part was to stick the wire on such small pins. Anyway It sort of worked as I could measure 3.8V after charging
But bad luck, the phone still doesn't want to power up.
Click to expand...
Click to collapse
Make sure that the power button, and volume buttons has good connection, also check charging port if it is good connected and clean all dirt inside usb port.
My take on the battery would be buy a "new" one.
didou691 said:
Hi, I'm back with some more news. I've tried th above solution, Test battery with multimeter showed me 1V. I then tried to charge the battery. Tricky part was to stick the wire on such small pins. Anyway It sort of worked as I could measure 3.8V after charging
But bad luck, the phone still doesn't want to power up.
Click to expand...
Click to collapse
From past experience any fiddling with the contacts and "plugs" on the battery or else where is a very dodgy proposition. My suggestion is (as above) buy a new battery, the very low voltage (1V) makes me think that the battery is shot.
Good luck