Please help.
While i try to upgrade the framware of my galaxy s phone showing the symble. Then i try the sites and found i can use the Odin3 software . Then i download the software and use the 3 butten procedure. then Odin 3 detect the phone.. I click start.after some time my phones yellow symble screen off and no action after that. Now i can't switch back on the phone. what i can do next. Anybody please please help.
Lack of info....
Sounds like you flashed wrong ROM with odin?
Related
Hello
I was flashing my Galaxy W but suddenly it stucked at AMSS....I just pulled of the cable and now when I turn on my phone, it says: Firmware upgrade encountered an issue.
How can I bring it back?!
TIA
You will need to put it in Download Mode, grab ODIN and flash one of these. Go back to stock, get it working, then start over
Good luck!
Firmware encountered an Issue...
Hi.
Im posting this here since this is the closest ive come to my own problem.
i was updating my samsung xcover when the update failed (due to bad cable) now i get the error message on my phone
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
only kies wont connect with the phone and the phone wont appear in the recovery tool. any help would be great!
The phone i have is a Galaxy Xcover with stock firmware
no mods nothing.
Any help would be great!
Thank you on beforehand
juzz86 said:
You will need to put it in Download Mode, grab ODIN and flash one of these.
Good luck!
Click to expand...
Click to collapse
Ah yes, but which one?
I've looked through the thread, doesn't seem like anyone's laid out a guideline for it. However, if you happen to know, could you tell me which one I'd need for my phone?
PDA: I8150XXLA2
PHONE: I8150XXKL3
CSC: I8150OXXKL4
Hello everyone i belive i have hard bricked my samsung galaxy s4 as i tried to root it and stupidly did save the current rom as a backup. Guess what it went pearshape and it does not boots up all the way only to where it says 'samsung galaxy s4 1905' then turns off. I can press home,down ,and power but not home up power it used to come up with all the info but not any more. I have tried using odin but it still did not work. Maybe i did something wrong using odin but i am not sure. Thankyou in advanced for the help many thanks Mike.
:cyclops:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Gonzo Mason said:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Click to expand...
Click to collapse
I am pretty aure i have already done that but i will try again tommorw morning.
If i does not work have you got any other idead mate?
Cheers
hi
Please forgive me English is very bad, brush into one recovery, then brush card, it is convenient
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try agai
Hi. I got the problem where I cant use my tab, because it just shows this message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
It happened because I tried rooting my tab in Odin. At first it failed, I tried it a second time and it kind of lagged.. so being my stupid self I disconnected the tab and since then I have this problem.
I tried looking for some resolutions, but half of them either uses Odin:
1. which I really dont know how to use
2. which considers the tab being in download mode. My tab cant even do that.. when I hold the Power+home+volume down buttons, the screen goes black and then the same message comes back.
The second half of resolutions is with Kies. I didnt know about Kies earlier, so it doesnt have my tab details stored there.
I dont know if Kies has to have your tab stored to use the 'Firmware Upgrade and Initialisation' option, but I tried in anyway. When I write in my model, which is SM-T230NU, it shows that the model information I entered cannot be verified.
When I charged my tab a bit and connected to my computer, Kies isnt able to find it. It finds that something is connected, because it shows that it's connecting, but then it stops, then connects, and the same over and over.
Anyways, I have a Samsung galaxy Tab 4 7.0, model SM-T230NU, and I really want to try and repair it on my own before I give it to service.
Please dont hate on my stupidity, because I'm not really into technology..
Hi, thank you for using XDA Assist. You're are going to have to flash the stock firmware in Odin. Go to sammobile.com for the firmware and see this on how to use Odin,http://forum.xda-developers.com/showthread.php?t=1372414. If you can't get into download mode that's going to be a big problem. You can look for help by posting here, http://forum.xda-developers.com/tab-4/help
Thread closed.
I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance
Bharan5484 said:
I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance
Click to expand...
Click to collapse
Bro you need to flash 3 part firmware with odin. Which galaxy core model you have? (G360H, G361 etc.)
Mr.Bola said:
Bro you need to flash 3 part firmware with odin. Which galaxy core model you have? (G360H, G361 etc.)
Click to expand...
Click to collapse
I have the same problem with my Gt-i8262. Pls explain how to flash 3 part firmware.
Regards Andbug.
andbug said:
I have the same problem with my Gt-i8262. Pls explain how to flash 3 part firmware.
Regards Andbug.
Click to expand...
Click to collapse
Use this guide http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-core-gt-i8262/ with pit file.(pit file is in attach) I hope you will fix your soft-bricked problem.
Mr.Bola said:
Use this guide http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-core-gt-i8262/ with pit file.(pit file is in attach) I hope you will fix your soft-bricked problem.
Click to expand...
Click to collapse
That's fine but how do i acess the bootloader. 3 button combo is not working. whenever I try it vibrates for some time and turns off(dead). But Odin still detects it. Pls help.
Regards Andbug
andbug said:
That's fine but how do i acess the bootloader. 3 button combo is not working. whenever I try it vibrates for some time and turns off(dead). But Odin still detects it. Pls help.
Regards Andbug
Click to expand...
Click to collapse
Bro buy a usb jig or do it yourself check this links
http://www.amazon.com/Generic-Unbrick-Download-Dongle-Samsung/dp/B00DC1ABI0
https://www.youtube.com/watch?v=Uq49XbzaFrA
https://www.youtube.com/watch?v=Rdn5GoRjhn0
https://www.youtube.com/watch?v=jKRrTZayRxU
Bharan5484 said:
I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance
Click to expand...
Click to collapse
Istall your device drivers. Search on google your stock firmware and download it, then open odin, and install it. Search a guide on youtube to install stock firmware.
Hello,
When the system was updated, Kies crashed. Nothing works anymore. Do not enter recovery mode. Only with a JIG I come into the DL mode.
The Samsung HL told me they have a software to repair that. But they do not give it to me.
Does anyone know the software? With Odin I could flash. But with what software? Can anybody help me?
With thanks in advance,
Dag
Hi
have a look at this guide here https://forum.xda-developers.com/galaxy-s2/general/guide-t2345831