Related
This might be a kind of noob-ish request, but I'm trying to avoid rooting (I know, I know) and wondered if there was a way to port over the dialer-contacts in APK form from 2.3.
I would appreciate any help/guidance.
Did anything change in the dialer between Froyo and Gingerbread?
Took these off my Nexus S. Not sure if they'll work but here you go!
sccrplyr13 said:
Took these off my Nexus S. Not sure if they'll work but here you go!
Click to expand...
Click to collapse
Be careful. Make a backup of the original apks first (or a full nandroid backup) . if they don't work, they're likely to cause the system to crash-loop (continuous FCs). Happened too me when trying a moded phone.apk before.
Aren't the dialers the same, I didn't notice any differences apart from the look, from froyo and now on gingerbread
Sent from my HTC Wildfire using XDA App
Thanks for the fast response, but I'm getting a parse error trying to install the APKs.
To everyone else: I'm mostly trying to get something more like AOSP over the stock HTC stuff, and most of what I've found on here is stuff designed to flash on top of ROMs for rooted phones.
Port of MIUI, with MMS working.
READ BEFORE YOU POST ANYTHING:
WIMAX?
NO. NEVER. If you want to know why, ask the Chinese authors of this ROM.
ROOT APPS NOT WORKING:
Make sure you have enabled root access in the settings of the Superuser app!
HINT: Look in the "Tools" folder.
A note on the built-in SMS splitting: I don't trust it. In my short testing, with the counter setting (e.g., the "(1/2), (2/2)" stuff) turned on, receiving the messages was inconsistent with version 1.7.22. Turning the counter off seemed to produce more consistent working behavior. With version 1.7.29, the multiple messages would send, but the phone will still report errors with sending. Personally, I'll still use Handcent.
Click to expand...
Click to collapse
I take NO credit for this, aside from just helping to put it together. Huge thanks to jefftet for ongoing help. Thanks to warttack for helping to get things started.
Kernel is the standard CM7 kernel. Any AOSP 2.6.35 kernel should work (e.g., mine!).
Current version:
DOWNLOAD THE LATEST VERSION FROM MIUI.us: http://roms.miui.us/
Thank you!
Thank you so much. I've been waiting for this issue to be resolved and was the only thing keeping me away. Thanks again for taking yours and others time and resources to work on issues that you were not obligated to do, its very appreciated.
Nice! Downloading as soon as link is fixed.
Been waitin for this. Time to back up my apps
Sent from my PG06100 using Tapatalk
Im so happy miui is back up working 100%. Thanks for all your guys hard work
can any of the aosp kernels be used with this? never flashed a MIUI rom before, so i'm wondering if i could still flash scary's newest kernel with this...
jwigley24 said:
can any of the aosp kernels be used with this? never flashed a MIUI rom before, so i'm wondering if i could still flash scary's newest kernel with this...
Click to expand...
Click to collapse
Yep, aosp kernels work with Miui..
Sent from my PG06100 using XDA App
MIUI.us_speedy_1.7.22_x99_v20110725.zip - [link down while I fix one last thing]
...i'm guessing you're fixing the audio output?
See now this is what I'm talkin about
Sent from my MiuiSpeedy
what was the mms issue?
DJAscendance said:
what was the mms issue?
Click to expand...
Click to collapse
Op states its a framework issue.
<Blaze One>
can you make a flashable zip for the MMS fix? im on 7-4-11 from a different dev and MMS is bogus on mines yo!
Please and thankx
popasmurfn23 said:
can you make a flashable zip for the MMS fix? im on 7-4-11 from a different dev and MMS is bogus on mines yo!
Please and thankx
Click to expand...
Click to collapse
There never was a 1.7.4.....
Sent from my MiuiSpeedy
Anxiously awaiting a headset fix..... seems we never get a 100% working miui!
Sent from my MiuiSpeedy
Actually it was your 7-8-11 anyway can u make a flashable? I don't want to wipe.
Oh and btw your 7-8-11 post says nothings broken???
Sent from my PG06100 using Tapatalk
I wiped cache and dalvik and flashed over what I already had with no problems!
Sorry about that, after we realized the bugs I never updated the OP. When I can get some extra time I'll continue messing with it.
Sent from my MiuiSpeedy
Dont know how exactly the headphones are controlled, but I took a look inside framework.jar and at path "/smali/android/media/AudioSystem", it looks like there are a bunch of references to output and headphones there.
Hopefully that'll help you a little. I always hated searching for simple smali edits to change one stupid thing.
<Blaze One>
I need verification that this works. It worked on mine for the headset issue.
NANDROID BACKUP BEFORE YOU DO ANYTHING!!!
1. copy file from miui 1.4.29 system/etc/TPA2051_CFG.csv to sdcard.
2. with root explorer copy file to system/etc/
3. reboot and test.
I tested it with my sirius app which did not play with headphone before and now does.
So this seems to be the standard of all standard mods for Sense 3 so I thought I'd port it first and post it for everyone to use.
Requirements
rooted
using a DEODEXED ROM
must know how to use ADB or have CWM installed
I used Paul's deodexed stock ROM to build this from.
Had my buddy jface test it out and it seems to be working, here's a screenie he sent me back
Installation
You can either flash the attached zip (untested, someone test it for me!), or push the attached SystemUI.apk to /system/app/SystemUI.apk.
MAKE A NANDROID BACKUP! Just do it. Always. It's so much easier than having to recover from a bad flash or something.
good look bro you beat me to it hahaha thanks man!!
Nice. Trying this out now. Now I can get rid of my profile widget lol.
Sent from my MyTouch 4G Slide
awesome mod! thanks a lot
Thank you! Work's great!
Lily.
can this be merged with UOT? that mod themes the battery and also patches SystemUI.apk.
So only 1 sticks .
The flashable zip does not work for me.
CRT ON/OFF HERE
Has anyone tested to see if this works on Sense 2.1 Gingerbread ROMS?
Sadly I'm still rocking an HTC HD2 and I'm running 2.3.3 with Sense 2.1.
I don't mind being a guinea pig after a nandroid backup but I just figured I'd ask if anyone tried it yet first.
It won't work. You will get a systemui fatal error and a force close loop.
Sent from my myTouch_4G_Slide using xda premium
Undeadk9 said:
It won't work. You will get a systemui fatal error and a force close loop.
Sent from my myTouch_4G_Slide using xda premium
Click to expand...
Click to collapse
Good to know. Does anyone here in this thread know how I can apply these same changes to my current systemui.apk?
I really like the Extended QuickSettings but I'm not too interested in running a Sense 3.0 ROM on a less than capable device like the HD2.
dharvey4651 said:
Has anyone tested to see if this works on Sense 2.1 Gingerbread ROMS?
Sadly I'm still rocking an HTC HD2 and I'm running 2.3.3 with Sense 2.1.
I don't mind being a guinea pig after a nandroid backup but I just figured I'd ask if anyone tried it yet first.
Click to expand...
Click to collapse
From the code I've looked at on Sense 3 ROMs, they typically define whether something is Sense 3 or 2 compatible. So in a real-world example when you're looking at Rosie it has two completely different implementations between 2.1 and 3 and they're both there in the code base. There was no such distinction with quick settings
Dumb ranting aside, I don't see a reason why it won't work on a Sense 2.1 device running Gingerbread. Shoot me over your SystemUI.apk and I might be able to port it. No promises, blind developing sucks
Romanbb said:
From the code I've looked at on Sense 3 ROMs, they typically define whether something is Sense 3 or 2 compatible. So in a real-world example when you're looking at Rosie it has two completely different implementations between 2.1 and 3 and they're both there in the code base. There was no such distinction with quick settings
Dumb ranting aside, I don't see a reason why it won't work on a Sense 2.1 device running Gingerbread. Shoot me over your SystemUI.apk and I might be able to port it. No promises, blind developing sucks
Click to expand...
Click to collapse
Never asked for a promise. The fact that you're willing to give it a shot, even though you don't have the same device as me is MORE than enough for me.
Here's my SystemUI.apk. Just did a nandroid backup so I'm more than happy to go flash happy right about now lol.
dharvey4651 said:
Never asked for a promise. The fact that you're willing to give it a shot, even though you don't have the same device as me is MORE than enough for me.
Here's my SystemUI.apk. Just did a nandroid backup so I'm more than happy to go flash happy right about now lol.
Click to expand...
Click to collapse
I need your com.htc.resource.apk too
Undead how do I use this on ur sense rom??? I tried replacing the system app thing and it got forced close... Any suggestion?
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App
Should just flash right over.
Sent from my myTouch_4G_Slide using xda premium
Cool got it to work... The flashed worked but the replacing the system app didn't...
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App
Romanbb said:
I need your com.htc.resource.apk too
Click to expand...
Click to collapse
Here you are good sir.
http://www.megaupload.com/?d=MH4YSVW6
m0j09987 said:
Cool got it to work... The flashed worked but the replacing the system app didn't...
Sent from my Supercharged MT4G Slide Running Undead's Stock Sense ROM using XDA App
Click to expand...
Click to collapse
When you do the copy and paste method you must change the permissions. Flashing is much easier.
Sent from my myTouch_4G_Slide using xda premium
dharvey4651 said:
Here you are good sir.
http://www.megaupload.com/?d=MH4YSVW6
Click to expand...
Click to collapse
So, I think it IS possible, but it would take quite some time to go through and merge all the changes and match up all the IDs. I don't have the time or patience to do this as it takes a long time to communicate back and fourth for one single change, or error, etc etc.
Maybe an experienced smali hacker from the HD2 can port it over?
Sorry man
Romanbb said:
So, I think it IS possible, but it would take quite some time to go through and merge all the changes and match up all the IDs. I don't have the time or patience to do this as it takes a long time to communicate back and fourth for one single change, or error, etc etc.
Maybe an experienced smali hacker from the HD2 can port it over?
Sorry man
Click to expand...
Click to collapse
No worries. Like I said, I thought it was cool and figured it would be nice to have. I never expected you to spend a ton of time porting it over. Figured if the current one worked for Sense 2.1 then I'd try it. If not, maybe some other time. The fact that you even took a look at it was good enough for me.
Thanks again man.
-Dan
For anyone wanting to try out the new HTC Amaze camera. Here it is. I've only briefly tested it on Nils' Business Gingersense 3.5 but it should work on any 3.5 ROM. It may also work on 3.0 ROMs but I haven't tried it. I know it does NOT work on pre 3.0 ROMs.
Let me know how it works for you.
-xdadevelopers-user
EDIT: The attached file isn't really an APK. It's a flashable zip. When I zipped it up I forgot what I was doing and named it wrong. To use it just rename it to a .zip and flash from recovery as normal.
The apk won't install since it is actually a flashable zip file.
The script assumes that system apps are in system which may or may not work on all 3.5 ROM's Symlink should make it work.
The camera works nice with just a slight learning curve. For example, the picture taking function is the trackpad
The video does not work at all. Atleast in my tests.
will try this out later
NilsP said:
The apk won't install since it is actually a flashable zip file.
The script assumes that system apps are in system which may or may not work on all 3.5 ROM's Symlink should make it work.
The camera works nice with just a slight learning curve. For example, the picture taking function is the trackpad
The video does not work at all. Atleast in my tests.
Click to expand...
Click to collapse
Arghh.. I forgot what I was doing. You are right. Just rename it to .zip and flash as normal.
Sorry.
-xdadevelopers-user.
Almost 40 downloads and only one comment? I guess I can assume that it's working OK for those of you who tried it?
-xdadevelopers-user
What I noticed is that the camcorder doesn't work and there is a big button looking thing on the right side. Other than that its faster than the other 3.5 cameras
Sent from my HTC Droid Incredible using XDA App
Can't this to work
I'm on the $Prime XL 3D$ ROM V3. Not sure how much this differs from what he has on this ROM already, but I'm always looking to try another camera!
Will this add zero shutter lag? or is that not overcome able with older phones?
Thank you for sharing.
Is the latest recovery required for this? I am still on CM 3.0.8 and just get an error.
Tried this out the other day on newts 3.5 Rom didn't really see any difference.
Sent from my ADR6300 using XDA Premium App
Thanks
Sent from my ADR6300 using xda premium
I have picked up an old project I was working on, getting Eclair on our phones.
Now you might think, why Eclair, it is much older than Froyo and we already have Gingerbread!?
The answer is simple, just because we do not have Eclair roms for our phones
Some people here think newer is always better, but that is not always the case
Eclair is already booting, but I have some FC's and launcher does not work correctly. Neither any other things work.
I was trying to get a logcat, but could not connect using adb.
Perhaps someone else can give me a solution for enabling adb?
What did I use to get eclair booting up?
Froyo bootimage
Compiled Eclair using Froyo-libs and kernel.
If you want to take a look at it, here is a pre-pre-alpha where nothing works
It is not the latest, because I'm already solving some problems.
Reserved for future use
Why are you doing this?????
Raffy 97 said:
Why are you doing this?????
Click to expand...
Click to collapse
Damn ---^^^open your eyes wide n read d first post!
Sent from my LG-P500 using Tapatalk
First: Congrats
Second: Provide some logcat,maybe you have same problem as mine in OMFGB (missing resources in apks)
Third: Upload to your gitHub,I'll have a look
BTW: Could you check if you have any /build/core/kernel.mk? Really getting mad with that error on CM6.
Could not get any logcat
But it's solved
Launcher is working now!
Updated build.prop, checked if some files existed, but some were missing.
Guess I forgot something in device-files
Now working on sd-card mounting, gsm and wifi, if these are fixed I will provide an updated zip (this zip contains generic build.prop )
_Arjen_ said:
Could not get any logcat
But it's solved
Launcher is working now!
Updated build.prop, checked if some files existed, but some were missing.
Guess I forgot something in device-files
Now working on sd-card mounting, gsm and wifi, if these are fixed I will provide an updated zip (this zip contains generic build.prop )
Click to expand...
Click to collapse
Non-working RIL could be caused from three things:
You missed LG services into makefiles/.rc files (if you want I can PM you some strings to add to .rc files)
Wrong libs (easy to check)
Non-prelinked libraries (define TARGET_PRELINKER_MAP (or some like that) into device_thunderg.mk and modify prelink-linux-arm-msm7xx7 or some like that with names of unlinked libs. You can see what stuff isn't prelinked with a debugging-enabled linker you can find into Swift-sense Mur4iK GT540 post. For prelink address,use google because I don't know
Would this have any actual speed benefit?
Sent from my LG-P500 using Tapatalk
You will absolutely encounter speed differences with Gingerbread.
You will even have more space available, romsize is rather small
_Arjen_ said:
You will absolutely encounter speed differences with Gingerbread.
Click to expand...
Click to collapse
yes performance will be 2x(low) xD
If you can't contribute anything usefull, do not react here, I was glad SWEATTAIMI has stopped with it after many warnings and now you start
Anyway, Eclair is more smooth than Gingerbread on our phone (at least this version)
ccdreadcc said:
yes performance will be 2x(low) xD
Click to expand...
Click to collapse
Reply to my private message
Sorry for offtopic
Sent from my LG-P500 using XDA Premium App
CAF Code right?
BTW,Did you build kernel together with the system? If so check your kernel.mk into /build/core. I'm getting mad at it.
Sent from my LG-P500 using XDA Premium App
No, this one is just AOSP with some LG crap
And booting using original LG Froyo kernel for now
Seems most compatible
Perhaps later a custom kernel will be used
Sorry for this off topic, but, good job and good luck ^_^ i hope you can successfully do this i loved the older builds of android an would love to go back to it, i wish i could help in some way and this is the best i can do :3 but good luck
What's up with RIL Arj?
_Arjen_ said:
If you can't contribute anything usefull, do not react here, I was glad SWEATTAIMI has stopped with it after many warnings and now you start
Anyway, Eclair is more smooth than Gingerbread on our phone (at least this version)
Click to expand...
Click to collapse
whaa xD what now lmao,
good to see we can use eclair hope the look is as i remember D:
It is still as simple as Eclair is, it still uses the KISS principle
_Arjen_ said:
It is still as simple as Eclair is, it still uses the KISS principle
Click to expand...
Click to collapse
It didn't boot for me so i were not able to test
Sent from Mexico
The one posted here just boots to UI but launcher etc FC. (that is why it is called pre alpha)
Got one with working launcher now, but spent some time on OMFGB with Bytecode and CM9.
As soon as all is working I will release a beta.