{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help! I think my Mytouch 4G is bricked!!!
i have seen a LOT of these threads lately, and this thread is made to hopefully be able solve some of your problems.
most people think that a brick means "can't get into android system, phone is dead beyond repair." most of the time, this is NOT true.
Disclaimer: Please make sure you know what you are doing before proceeding. if your device wasn't bricked before but you somehow screwed it up, i will not be responsible. YOU are responsible for whatever happens to your device. i am just here to give you a few tips, and to help you out. once again, PLEASE MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE DOING IT!
Needed Things:
-computer
-android SDK, ADB. PLEASE TAKE THE TIME TO INSTALL AND LEARN TO USE ADB, IT COULD SAVE YOUR DEVICE BIG TIME. we have plenty of guides on how to use adb, please search them up and READ THROUGH THEM.
-a Mytouch 4G, or HTC Panache
-USB cable
-SDcard (doesn't matter what size)
ask and answer these two questions to yourself:
1) can you enter bootloader?
2) can you enter recovery?
if you've answered yes to any one of them, then chances are, you are still saved.
Note: if you can't enter either one of those, and your device doesn't show any signs of life, then don't bother reading on, you are truly bricked.
Notice: When you try flashing the PD15IMG.zip in bootloader, make sure the phone is NOT connected to the computer.
For S-On users:
Q: help! my phone is stuck on the Mytouch logo screen!
A: pull the battery, and see if you can get into the bootloader using volume down+power buttons
if you can get into the bootloader:
1) see if you can wipe data/do a factory reset in bootloader.
2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard, reboot into bootloader/hboot, and follow the onscreen instructions
note: if you are still unclear on what to do, read the "HOW TO RESTORE TO STOCK" section
Q: bootloader is giving me Fail-PU errors when trying to update
A: refer to the eMMC section
For S-Off Rooted users:
rooted S-Off devices are a bit more complicated.
Q: help! i can't get into the android system, phone stuck on Mytouch logo!
A: like for S-On users, see if you can get into either the bootloader, but also the recovery (usually clockworkmod).
if you can get into either of those, wipe data/factory reset, and reboot.
Q: bootloader factory reset, still stuck on Mytouch screen
A: well, if you have clockworkmod recovery (or 4EXT recovery) get into the recovery, wipe all user data/cache/dalvik cache and try reflashing a backup, or flash a new rom.
Q: reflashing didn't work, clockworkmod is giving me errors about mounting something.
A: new way! try to clear cache and dalvik in recovery, somtimes that works. thanks to urmothersluvr for reminding me.
A: there are two things that cause this. both have VERY similar symptoms. the first is because of the failed eMMC chip (refer to eMMC chip section), and the second is because the recovery got messed up, probably because you've been switching between a lot of EXT3 and EXT4 roms. if this is the case, just download the PD15IMG.zip (Android 2.2.1) file (IT WILL RETURN YOU TO STOCK) and start over again. OR you can reflash the recovery through adb (MUST HAVE ENG HBOOT 0.85.2007). thanks to Nicgraner for reminding me! if bootloader gives Fail-PU errors, refer to eMMC section.
HOW TO RESTORE TO STOCK
here are clear instructions on how to flash to stock using the PD15IMG.zip file:
1) download the PD15IMG.zip file:
Android 2.2.1 Android 2.3.4
2) rename the file to PD15IMG.zip if not already
3) place the file in the root of your SDcard, meaning not in any folders
4) power off your device, and reboot into hboot/bootloader by press and holding power + volume down buttons
5) hboot/bootloader should recognize the file, and ask if you want to update
6) select "yes", and wait for the update to finish
*Selections are made with the volume buttons, and hit the power button to select*
7) when the update is finished, hit reboot
8) wait for the device to boot up (may take awhile, first time boot only)
9) congrats, you are now back to stock Mytouch 4G, either 2.2.1, or 2.3.4
Click to expand...
Click to collapse
if you think you have a failed eMMC...
many things can cause the eMMC to die. if you suspect that your eMMC chip has died, please check your eMMC serial using this guide here using adb (for rooted users only, since you must be in recovery for the command to work).
symptoms of failed eMMC:
-massive lagging all of the sudden in android system
-phone suddenly shut down, and you can't turn it on, no matter what you do (if this happens, then yes, you're bricked)
-recovery showing errors about not being able to mount things
-BOOTLOADER SHOWING FAIL-PU WHEN TRYING TO RESTORE BACK TO STOCK USING PD15IMG.ZIP, IF THIS HAPPENS, THEN YES, THAT MEANS YOU ARE TRULY BRICKED. FAIL-PU MEANS FAILED PARTITION UPDATE, MEANING THAT YOU CANNOT WRITE TO THE PHONE/EMMC CHIP ANYMORE.
Click to expand...
Click to collapse
Ok, so my chip has died and i can't turn my phone on. can i send it in to t-mobile to replace it?
A: yes! BUT YOU MUST STILL HAVE YOUR WARRANTY WITH T-MOBILE. if you are S-On, you should have absolutely NO problems replacing at all. if you are S-Off, you might encounter some minor problems, but replacing should still be ok. what i did was play dumb with them, and they just sent me a new one. my old one died of bad eMMC, it was rooted, S-off and everything, even the splash screen said "rooted HTC Glacier" on it.
hopefully, this guide has helped you understand more of what has just happened to your beloved Glacier (MT4G).
if i forgot anything, or if you have anything to add to this, PLEASE LET ME KNOW
if i have helped, please hit thanks!
for the corrupted recovery you don't necessarily need to flash pd15img..you could boot into bootloader then fastboot and reflash the recovery img of your choice. Although some may not know how to.. just a thought
EDIT: Forgot to explain why lol, flashing pd15img will make you lose root whereas just pushing the new recovery will not!
Don't mean to be trollin, just some advice haha
Sent from my HTC Glacier using xda premium
Nicgraner said:
for the corrupted recovery you don't necessarily need to flash pd15img..you could boot into bootloader then fastboot and reflash the recovery img of your choice. Although some may not know how to.. just a thought
EDIT: Forgot to explain why lol, flashing pd15img will make you lose root whereas just pushing the new recovery will not!
Don't mean to be trollin, just some advice haha
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Where is the recovery pd15img.zip u speak of?
Sent from my HTC Glacier using XDA App
urmothersluvr said:
Where is the recovery pd15img.zip u speak of?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
It's in my OP. You can choose either the 2.2.1 version or 2.3.4.
Sent from my HTC Glacier Sense 3.5 using xda premium
saranhai said:
It's in my OP. You can choose either the 2.2.1 version or 2.3.4.
Sent from my HTC Glacier Sense 3.5 using xda premium
Click to expand...
Click to collapse
If it fails can I still use my phone I'm on? I know my cache won't mount
Edit: fixed it by formatting cache and rebooting recovery. U should add that up there for cache not mounting.
Sent from my HTC Glacier using XDA App
urmothersluvr said:
If it fails can I still use my phone I'm on? I know my cache won't mount
Edit: fixed it by formatting cache and rebooting recovery. U should add that up there for cache not mounting.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Alright i'll add that when I get home
Thanks!
Sent from my HTC Glacier Sense 3.5 using xda premium
EDIT: OP updated, thanks urmothersluvr!
OP updated with instructions on how to return to stock using the PD15IMG.zip file.... if you have any suggestions, PM me
I'm trying to load the pd15img.zip. I have a completely stock phone and for some reason it got stuck on the bootup screen so I'm trying to flash it to fix it.
However after I enter the bootloader and it finds the file, loads it and then checks it, it just returns to the bootloader screen. It never asks me to flash it.
Does anyone have a solution??
Exact same issue as mupepe. Does this mean the phone isn't saveable?
RussianSpring said:
Exact same issue as mupepe. Does this mean the phone isn't saveable?
Click to expand...
Click to collapse
is your phone connected to the computer? just wondering.
also, might be a bad download, try downloading again.....
It is not connected to the PC when flashing. I'll try redownloading the IMG. I get a "Wrong or bad image" thing in Hboot. Formatted SD card to fat 32 and tried a different card. This is a weird issue. I warrantied out the phone but TMO sent me a replacement with the washed out screen so I'd love to fix this.
Mine isn't connected to the computer. I get no sort of error. I'll redownload the image in a bit and report back. Thanks!
thanks a lot
Anyone have luck fixing the No Image or Wrong Image problem or the IMG file just checking loading then doing nothing?
RussianSpring said:
Anyone have luck fixing the No Image or Wrong Image problem or the IMG file just checking loading then doing nothing?
Click to expand...
Click to collapse
try redownloading..
could be a bad download
I downloaded it again and it still doesn't work
****. well 2.3.4 send me back to the bootloader screen and 2.2.1 gives me the main version is older error. All the solutions I've found to that error say to install 2.3.4 which doesn't work! ahhhhhh!
Problems
I bought a MyTouch 4G from Craigslist today (for $ 80, it has the superior screen, is cosmetically a 9.5/10 and it came with all accessories) and it is stuck at the MyTouch 4G screen. One of the local phone places told the seller that the phone needed to be flashed which I tried to do. I downloaded the file in this thread for 2.3.4, put it on the freshly FAT32 formatted MicroSD card, I booted into the bootloader, it found the PD15IMG.zip file, it loaded and checked it and went into the screen with the two green arrows and the one green arrow pointing downwards. Then every time in the middle of it, the phone turns itself off (battery is fully charged). It never asked if I wanted to update either. What could be the problem?
PCLiteratesJax said:
I bought a MyTouch 4G from Craigslist today (for $ 80, it has the superior screen, is cosmetically a 9.5/10 and it came with all accessories) and it is stuck at the MyTouch 4G screen. One of the local phone places told the seller that the phone needed to be flashed which I tried to do. I downloaded the file in this thread for 2.3.4, put it on the freshly FAT32 formatted MicroSD card, I booted into the bootloader, it found the PD15IMG.zip file, it loaded and checked it and went into the screen with the two green arrows and the one green arrow pointing downwards. Then every time in the middle of it, the phone turns itself off (battery is fully charged). It never asked if I wanted to update either. What could be the problem?
Click to expand...
Click to collapse
...lol i'm starting to think the link to the 2.3.4 PD15IMG.zip is wrong..
sorry guys if it is...
hmm have you tried to use the 2.2.1 instead?
I bought two MyTouch 4G's from the same seller (a couple) and his phone works fine, only hers is corky LOL. Both HBOOT screens are identical too, I checked his software version and it is the latest one (2.32.531.1), so I assume that hers is the same, it also shows the same date, July 15 2011 and the same radio 26.13.04.19_M in HBOOT. Maybe there is no PD15IMG.zip file for this latest updated ROM yet? After trying both different PD15IMG.zip files (2.3.4 and 2.2.1), I've been getting the "main version is older" errors on both. No Fail-PU though, so that makes me hopeful I'm thinking that she updated to the latest version and somehow it got corrupted, that is why the phone is stuck at the MyTouch 4G loading screen and won't go any further.
Update: I'm up and running again !! I found a PD15IMG.zip file on the t-mobile support website that worked specifically for the latest 2.32.531.1 update !! Here is the download link (I've uploaded it to megaupload): http://www.megaupload.com/?d=X1EAIPBJ
Related
I'm working on a single-package solution for S-ON full factory reset. It's a PD98IMG type package that, in addition to the program itself, contains the complete factory stock 1.80.502.3 RUU. It runs in three phases:
Overview:
Installs itself as a PD98IMG type package (it contains a stripped down CM6 OS with a single app--the app that does the restoration, the correct radio/kernel combo for gfree exploit, and a data partition containing the RUU); Simply copy the file to the SD card (with an adapter if you can't do it through the phone), rename it to exactly "PD98IMG.zip", then boot into HBOOT (disconnect USB if connected, pull and put back battery, then hold VOL-DOWN and momentarily press POWER).
Boots and runs the restoration program as the only app in the OS, prompting the user at each step to make sure all goes well. The last step copies the RUU from the data partition to the SD card, thereby replacing the PD98IMG.zip that installed everything with the RUU, then reboots to HBOOT for the final phase.
The final phase is loading and running the RUU on the newly restored (S-ON) device to return it to full factory status. The RUU copied in phase 2 is a genuine HTC stock 1.80.502.3 restoration RUU. Allow it to unzip and self-check, then press VOL-UP to write it to the device.
Once completed successfully, you should be in the same condition as an out-of-box new phone.
If you do have to send your phone back for warranty or insurance purposes, it should be a lot easier than the currently available methods.
Important! The newest batch of Inspires shipped from HTC (probably anything bought new after Aug. 2011) have hardware that is incompatible with the hboot in the Froyo update as listed here. If your Inspire is a later model Inspire, do not run the Froyo version on it. Use the Gingerbread version only!
Instructions:
Do a nandroid and/or Titanium backup! It never hurts!
While still in ClockWorkMod recovery, do a "Factory Reset/Wipe Data". This is necessary if you've got an ext4 cache or CM7 dalvik-cache on /cache. If not it will cause boot hang after installation. EXT4 cache will not work with this tool. If your recovery has ext4, be sure you format the cache to EXT3.
Download from the URL below, copy to the SD card and rename to "PD98IMG.zip"
Reboot to HBOOT: Shutdown completely (disconnect USB if connected and pull battery if necessary) then while holding down the VOL-DOWN key, press the POWER key for about half a second. The phone should boot into HBOOT, check the PD98IMG.zip for consistency, then prompt you to install. Select VOL-UP to install.
Once installed, HBOOT will prompt you to reboot by pressing the POWER button. Do this.
The operating system in this tool is a stripped down CM6 install with only the minimum features necessary to run an apk. The apk for the tool will run after the HTC splash screen, then prompt you through the process. Depending on the speed of your SD card, the last step, copying the RUU to the SD card, may take several minutes.
Once successfully completed, the phone will automatically reboot to HBOOT and begin the process of installing the RUU. The only thing you have to do at this point is acknowledge the prompt to install by pressing VOL-UP. (Note: the RUU install may skip a couple of images during the install but this is normal.)
Once the RUU is installed, press POWER to reboot and your phone should be in 100% factory out-of-box condition.
Changelog:
13-SEP-2011 -- Added emphasis to step 2 to drive home the fact that this will not work if you have an EXT4 cache partition.
21-AUG-2011 -- 1.07: Removed "beta" designation. Added both Gingerbread (2.3.3) and Froyo (2.2.2) versions since 2.3.3 is now officially released for Inspire. Cleaned up the launcher a bit, fixed some typos and scrolling issues.
11-AUG-2011 -- 1.06b: Reverted to a PD98IMG that does NOT erase the cache. This was causing boot hangs. There is now a new step 2 in the instructions. Be sure to clear your data/cache.
10-AUG-2011 -- 1.05b: Fixed black screen for some Inspires with different mfg. LCD panels. Added cache wipe to main image as a dirty cache partition could cause bootloops in some situations. Disabled screen timeout so screen doesn't blank out while copying RUU.
Download (restores to official Froyo 2.2.2) (315MB):
http://hoxnet.com/droid/s-on/PD98IMG_Inspire_S-ON_FactoryRestore_FR_1.07.zip
MD5: 4402961aef54f2928a757bd385e6c151
Download (restores to official Gingerbread 2.3.3) (309MB):
http://hoxnet.com/droid/s-on/PD98IMG_Inspire_S-ON_FactoryRestore_GB_1.07.zip
MD5: f6d519b11cc6229eb02c3ba274680c1e
--
Special thanks to ATTN1 and the rest of the crew at #liberatedAria for their guidance in producing this. Thanks to m0biusace and kem52 for alpha testing this. Thanks to XDA crew for all the help they've provided with this forum.
When I try to do the power and holding the volume up button what happens is the phone vibrates and the led light just keeps flashing ? Any ideas ?
Sent from my Inspire 4G using XDA Premium App
whiteman0vette said:
When I try to do the power and holding the volume up button what happens is the phone vibrates and the led light just keeps flashing ? Any ideas ?
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Whoops. First typo. It now reads:
(pull and put back battery, then hold VOL-DOWN and momentarily press POWER).
Click to expand...
Click to collapse
Sorry about that.
It's all good. :0)
Sent from my Inspire 4G using XDA Premium App
I'm actually wanting to flash my phone back to an "out of the box" state, I'm downloading the .zip now, I'll post the results in a few. If this works, you will have made me a happy man!
I'm going to get the Motorola Atrix (I hope it's actually better...)
*EDIT* so I need to have S-ON BEFORE running this package?
I downloaded the above, renamed it, booted to HBOOT, ran the update however I still have S-OFF. Boots to a black screen... (Brick??)
if you have s-on, you probably never rooted in the first place so what are you looking to "restore"?
Zbor said:
I'm actually wanting to flash my phone back to an "out of the box" state, I'm downloading the .zip now, I'll post the results in a few. If this works, you will have made me a happy man!
I'm going to get the Motorola Atrix (I hope it's actually better...)
*EDIT* so I need to have S-ON BEFORE running this package?
I downloaded the above, renamed it, booted to HBOOT, ran the update however I still have S-OFF. Boots to a black screen... (Brick??)
Click to expand...
Click to collapse
No HTC splash screen? It should boot into a minimal android system. Try pulling the battery and power on.
ill test for ya..
downloading now. i have to get my phone to stock to show my friend how easy is is to root and use custom roms. hope this works...
The atrix sucked for me I sold my first inspire and got one it just sucked it might be good in the winter for a hand warmer it gets smoking hot so if you get one good luck
Sent from my Inspire 4G using XDA Premium App
Great tool, downloading
works
It worked as it should. S-on and back to stock, very easily. great work.
Nice job, GenePoole. This was well thought out and executed.
is there a specific place to put the PD98IMG or is anywhere fine?
This didn't work for me. I wanted to try out the new Gingerbread release from AT&T and when I run through this process, I'm stuck at a black screen after step 4. I tried twice just to make sure I didn't screw something up. Black screen, both times.
thanks
so i haven't tried this method yet, im wondering if i return my inspire to get a new replacement inspire, will it be as easy to root my new inspire as it was a couple months ago, the reason i ask is because anyone with a rooted evo 4g better take good care of it because if they send it in to get a new one they will be stuck with stock, the new evo 4g is unrootable lol, sucks for them, any ways i just dont want a stock inspire that cant be rooted, thanks for this tool mate, i will surely use it once i know i can root my replacement inspire
This worked perfect and checked for update and told me I can download gb right away. Thanks and keep up the good work.
Sent from my Desire HD using XDA Premium App
does this make the splash screen the default or does it stay coustom
Zbor said:
I'm actually wanting to flash my phone back to an "out of the box" state, I'm downloading the .zip now, I'll post the results in a few. If this works, you will have made me a happy man!
I'm going to get the Motorola Atrix (I hope it's actually better...)
*EDIT* so I need to have S-ON BEFORE running this package?
I downloaded the above, renamed it, booted to HBOOT, ran the update however I still have S-OFF. Boots to a black screen... (Brick??)
Click to expand...
Click to collapse
Did you check the md5 sum?
Sent from my Desire HD using XDA Premium App
greentrees89 said:
so i haven't tried this method yet, im wondering if i return my inspire to get a new replacement inspire, will it be as easy to root my new inspire as it was a couple months ago, the reason i ask is because anyone with a rooted evo 4g better take good care of it because if they send it in to get a new one they will be stuck with stock, the new evo 4g is unrootable lol, sucks for them, any ways i just dont want a stock inspire that cant be rooted, thanks for this tool mate, i will surely use it once i know i can root my replacement inspire
Click to expand...
Click to collapse
Yes, the new ace hack kit by ATTN1 fully supports the new AT&G Gingerbread update.
cordell507 said:
does this make the splash screen the default or does it stay coustom
Click to expand...
Click to collapse
The RUU has the default splash screen (white with green "HTC") so I would assume that if you have a custom screen, it will overwrite it, but I have no first hand information. I'll try installing a custom splash on mine and see what happens.
here is my issue.
2 weeks ago, i rooted my phone. all was well. flashed CWM Recovery 5.0.2.1 for my Thunderbolt. I made a backup just before i rooted so that in case ANYTHING went wrong, it would unroot me and fix any problems. So, here i am, backing up apps with Titanium Backup, and it backed up fine. The next thing i did was start to uninstall HTC Bloatware... I knew which ones were the ones i could remove, plus even if i removed the wrong one, i could just restore using my image backup. After removal, the phone instantly ran better. i had over 65% free memory space... This was all well and good, until i rebooted the phone. the instant i rebooted my phone, i was getting the flashing HTC Quietly Brilliant screen. i had done NOTHING to it to cause this. It would alternate from HTC splash to Thunderbolt animation.
So, knowing what was wrong, (UI not loading) i went to recover my image from CWM. that went fine. but things just got worse. After a successful recovery (according to CWM) i rebooted, but to my surprise, now its worse. its stuck at the HTC boot logo. ALL MANNER OF ROMS DO NOT WORK!!! recoveries, new OS, anything, all the same result. AT LEAST with the thunderstick full blown ROM, i can get back to the looping splash screen, but not any further. i DONT KNOW what is wrong but i am hoping one of you mad phone geniuses out there can get my phone working. i tried getting s-off with revolutionary, but it failed because the phone has to be booted up for it to work, and is something i obviously cant do at this point... relocking the phone made things worse too because i unlocked using the HTCdev method.
This is not a boot loop, as it doesnt loop. it just sits there. i have tried every available resource on this, and other sites. i must have read over 1,000 posts in the past week to try and gather what the devil happened to my phone... If its any help, i did accidently delete the settings storage APK file, but a restore should have fixed that. i want to lock up the phone to send it in for repair but i cant gain s-off to flash a new radio with the phone in its current state. i know how to do all if these things but the phone wont let me.
Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium
Does your computer recognize your device?
Sent from my ADR6400L using xda app-developers app
i am nearly pulling my hair out...
smtom said:
Reformat the sd card to fat32 and flash an RUU file to put you back to stock.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...
cyberkeeper1 said:
any RUU downloads that would have been available on multiupload.com are disabled and redirects to to "the internet vs., holywood". besides, as i said, any attempt to flash any rom no matter what it is fails. Well, technically it FLASHES ok, but doesnt actually work. as far as i know, the phone has 2 bootloaders in any given android phone. There is the primary HTC Bootloader (Hboot) and a secondary ROM UI Bootloader. (Android Boot) i think what has happened is that this part has become corrupted and i wanted to know how to access this and reformat that. supposedly you cant because its partitioned, and formatting the partitions would fix my issue. problem is that i have done all of this. to answer the second reply, yes, i can get the phone to be recognized in any mode as long as its fastboot, or recovery. Fastboot.exe works, and adb recognizes it in recovery as being IN recovery mode. unfortunately, with my device still locked, i cannot flash a new bootloader, which might solve my problem. this is not like any issue currently on XDA so far as i read, so this is why i created a new thread.
I am sure the Moderators will agree that my problem seems to be unique. After reading what seems to be hundreds of forums, i cannot solve the issue. While technically i am a newbie here, i am no stranger to modding phones. i have been at it for over 4 years now. THIS problem is absolutely a first for me. At least before i could restore using CWM, but even that failed. i checked my MD5 Sum for CWM backup and it checked out.
If someone can provide me a link to an ORIGINAL, unmodded, RUU that shipped with the phone, (PRE OTA 2012) that ISNT that stupid file-factory corrupted crap, i would be extremely indebted to that person. last time i used File-factory, it took THREE hours and the download was corrupted according to CWM. it refused to flash the phone even though Chrome said it completely downloaded (Error: Bad - Installation Aborted). There was no MD5 SUM to compare with so thats also another problem. i absolutely need that info to properly flash the phone. All the other ROMS i downloaded like TSGB and Lightning Rom technically flashed fine after a full wipe, but refused to go past their own "Open Mobile" splash screen.
So you see, i am at a loss with this phone, as all i did was reboot after rooting it, and nothing i did could have possibly caused this kind of failure...
Click to expand...
Click to collapse
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2
will this really work??!? lol
trter10 said:
https://dl.dropbox.com/u/61129367/Stock-ROM.zip
013CBDD3A9B28BC894631008FA2148E2
Click to expand...
Click to collapse
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.
new problem... i think...
cyberkeeper1 said:
If this works, i will be forever grateful. and something that mere Custom ROMS wont do, is repair any boot issues and lock up my phone again right? i hope at least it fixes the issue.
Click to expand...
Click to collapse
ok. so the download finished fine so far as i know, but now CWM says ITS bad too. i will try again but i cant seem to flash any stock rom no matter if its OTA or pre-OTA from CWM. is there a way to flash a rom from the PC via adb or something?
Ohh! They're not flashed through CWM. They're flashed through hboot. Just rename it to PG05IMG.zip and put on SD card and boot to hboot it will ask you to flash
Sent from my ADR6400L using Tapatalk 2
i will try that. previous hboot flashes always fail. it reads the archive, but never goes to "checking zip". it loads, checks, and then parses. i was successful with my evo shift earlier today, but that thing is ancient compared to my thunderbolt. With the Shift, i was able to gain root AND s-off with an old bootloader and i dont even need a new one.
i wanted to do the same with my bootloader in case another disaster hits because then i can flash whatever RUU i want with s-off. i will make sure the MD5 SUM matches before flashing. i forgot to do that anyhow.
Hboot flash failed. went through the motions of scanning it and it scanned the whole thing and then did nothing. it returned me to Boot Choices. Like Fastboot, recovery, etc... i tried twice. are you absolutely certain that is the shipping firmware that formats the entire phone, and not just updates it? i cant send it to verizon even though they know it was illegal to lock up my phone... Anyhow, i realy need this thing working and i have racked my brain enough to damage it already... lol. if it fails again i will try to redownload it. So far it loads and does NOT ask me to start the update. could be a version issue because it does not complain about anything else.
Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app
lemew said:
Have you tried following the instructions in the return to stock thread in the android development section stickies? This may help you.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
yes i have. i cannot do what it asks because it requires my phone to be functional to flash it using hboot. i need a signed copy of an older RUU. hboot doesnt do anything with it. its a valid copy, and i can see all the images and contents in windows and linux, but all i can get hboot to do is read it, then it doesnt ask me to update. i dont know what to do now.
I believe there is a ruu image without hoot download there.
Sent from my ADR6400L using xda app-developers app
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
Try http://shipped-roms.com/index.php?category=android&model=Mecha
Sent from my ADR6400L using xda app-developers app
ok well i will literally try ALL of the signed images. i will see if hboot will update it.
If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app
How i fixed my tbolt stuck at the white HTC screen
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.
mpcapps said:
I had this exact same problem literally yesterday (stuck at HTC screen) with some different cwm symptoms. I'm guessing my cwm was corrupted because the phone would reboot after about 30 seconds being in cwm, preventing me from flashing any roms. oh, and my backup image was corrupted as well. awesome. Flashing other CWMs did not fix the CWM problem.
Your problem sounds similar in the fact the CWM won't flash properly. You're trying to fix it by trying to flash a rom in HBOOT that isn't configured to be flashed that way. for example, i put the skyraider rom (named properly) in the root folder and tried to flash with HBOOT. it scanned and parsed but didn't give me the option to flash.
What I did was go here and grab a stock like image:
androidforums.com/thunderbolt-all-things-root/418539-thunderbolt-root-unroot-thread.html
(won't let me make a link, i'm too new)
Go to the "Putting current stock firmware and s-on back onto the phone" section.
Download file 1 and flash it using HBOOT. I had to pull my sd card to get the file on there since cwm was crashing. Only flash that rom and nothing else. It flashed for me; if it doesn't flash for you then maybe your HBOOT is corrupted, and if so i don't know if you can fix it.
Once that flashes, reboot the phone and it should return to some level of functionality. You'll have S-off but no recovery or root tools installed. I ran revolutionary at this point, which recognized i already had S-off...then it offered to load CWM. This i did. in the meantime i deleted the unrooted image and put the image of the rom i wanted on the sd card. i then booted into recovery(it won't flash in HBOOT) and loaded that rom (skyraider zeus). That worked fine and the cwm didn't crash out.
I hope this works for you. I was getting ready to fire back up my OG droid before i did this.
Click to expand...
Click to collapse
I have read that post you provided probably 100 times its not working for me. flashing a custom rom actually got me past the HTC white screen and into a splash screen loop (Open Mobile). Also, I havent even been able to use the REV tool because my phone is not recognized by it without it being fully functional. you have to be fully booted up for the REV tool to use adb and start the process. thats why i need a signed copy of an older ROM with hboot flashing capability so i can fully restore my phone. i am 100% sure its a corruption issue, but i am out of clues as to how to actually get it to flash over while being s-on. with the evo shift it worked perfectly. it only took me 20 minutes to root, s-off and flash a custom rom. this phone has been a thorn in my side ever since i accepted that STUPID FOTA... i regret not knowing before hand what that OTA was and what it prevented. Now i know, too little / too late.
without s-off, i cant unlock hboot to flash it, and the fastboot mw whatever command failed also because its locked tight.
lemew said:
If your hboot is flashed with revolutionary I believe you have to unlock it before anything thing else can be flashed over that. Hboot or emmc could be corrupted as well.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
thats what i thought. is there a way to change out that eMMC, or remove it to format it manually? i mean based on the description, its technically external which implies removable.
Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app
lemew said:
Yes you can format emmc I do not know if this will solve your problem. You wipe abd format through adb but need to see if it is being mounted first.
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
too bad i cannot repartition it to allow for more RAM instead of app space. i dont care about app space because i have a 32gb card... lol. i just want that phone to be faster than what it is currently once i finally get it running.
Hi guys,
My phone now currently running android 2.3.4. My phone originate from Hong Kong and already unlock by the seller.
I received an update which include security fix by HTC.
I download the update and it require me to reboot to complete update. While installing, the error signal show up and i was stuck over there.
I tried factory reset and also hard reset, but the result still the same.
Below are the picture, please have a look :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you
Do you have a custom recovery (like Clockwork Mod or 4ext) installed and if so have you tried rebooting the phone in recovery?
Sent from my HTC Sensation 4G using xda premium
Vaporizers said:
Do you have a custom recovery (like Clockwork Mod or 4ext) installed and if so have you tried rebooting the phone in recovery?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Nop, any idea how to format this phone with official ROM ? because i think the current ROM got problem.
Not sure it will work or not
Remove battery , insert battery ,press volume down + power button at same time... And from bootloader select factory reset . And then reboot
Btw r u sure u dont have custom recovery ????
Sent from my HTC Sensation using xda app-developers app
Itsakash said:
Not sure it will work or not
Remove battery , insert battery ,press volume down + power button at same time... And from bootloader select factory reset . And then reboot
Btw r u sure u dont have custom recovery ????
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Thank you for the reply. I did that before. The problem still the same.
I'm pretty sure for that, it's because the device i just brought it few days.
Have you tried downloading the ruu you need and trying that? I've had to ruu back to stock a couple times....doesn't hurt to try.
Sent from my HTC Sensation using Tapatalk 2
MunkyButt said:
Have you tried downloading the ruu you need and trying that? I've had to ruu back to stock a couple times....doesn't hurt to try.
Sent from my HTC Sensation using Tapatalk 2
Click to expand...
Click to collapse
Actually i not really know how to do. Can you provide me a link for RUU?an official ROM link for me to download perhaps.
I did try to ask the repairing shop, they not dare to help me to reformat, the reason is, they say my phone originate from Hong Kong and i currently now in Malaysia.They do not want to take the risk. I'm so Helpless =(
Before you do any more flashing of anything, go back to the bootloader (pull battery, then power button + volume down) and post here EXACTLY what you see on the screen. If possible just take a picture of the screen.
It makes me nervous that you got your phone from Hong Kong and then an update didn't work. There are a lot of fake Sensations coming out of China. They look like the real ones, but the hardware is different and firmware/roms/radios made for the Sensation won't work on them.
If you have a fake one, trying to flash an RRU on it will deffiantely kill it and kill it badly.
Skipjacks said:
Before you do any more flashing of anything, go back to the bootloader (pull battery, then power button + volume down) and post here EXACTLY what you see on the screen. If possible just take a picture of the screen.
It makes me nervous that you got your phone from Hong Kong and then an update didn't work. There are a lot of fake Sensations coming out of China. They look like the real ones, but the hardware is different and firmware/roms/radios made for the Sensation won't work on them.
If you have a fake one, trying to flash an RRU on it will deffiantely kill it and kill it badly.
Click to expand...
Click to collapse
I check from HTC already. They asking me provide them my IMEI, after they check, they told me my phone was originate from Hong Kong.
I think should be original..haha..hopefully..
and here is my screenshot
fookelvin said:
I check from HTC already. They asking me provide them my IMEI, after they check, they told me my phone was originate from Hong Kong.
I think should be original..haha..hopefully..
and here is my screenshot
Click to expand...
Click to collapse
Yeah that looks all legit.
I didn't mean to scare you. But that's been happening lately where someone buys a knock off, tries to install Sensation software, and bricks the phone.
To fix your problem you may have to use ADB to install a custom recovery. Or you should be able to do it using a PM58IMG file. I'm pretty sure there's a PM58IMG file for flashing 4EXT in the 4EXT thread in the dev section. Just put the file on your SD card (using a computer, obviously since the phone doesn't work) boot into bootloader, and let it run. You should then have 4EXT
You can also upgrade the firmware the same way if you want to get ICS or Jelly Bean.
I think your problem is a lot more fixable than it seems. So don't stress. You should have this up and running oon.
Skipjacks said:
Yeah that looks all legit.
I didn't mean to scare you. But that's been happening lately where someone buys a knock off, tries to install Sensation software, and bricks the phone.
To fix your problem you may have to use ADB to install a custom recovery. Or you should be able to do it using a PM58IMG file. I'm pretty sure there's a PM58IMG file for flashing 4EXT in the 4EXT thread in the dev section. Just put the file on your SD card (using a computer, obviously since the phone doesn't work) boot into bootloader, and let it run. You should then have 4EXT
You can also upgrade the firmware the same way if you want to get ICS or Jelly Bean.
I think your problem is a lot more fixable than it seems. So don't stress. You should have this up and running oon.
Click to expand...
Click to collapse
=) you seriously scare me T_T..haha..! By the way, can u show me the steps and link maybe or require software? I will really really appreciate you~
Use this guide, follow the steps exactly!! for installing 4ext second method, and the remainder of the document for firmware and the arhd rom. Your phone is already s-off.
http://forum.xda-developers.com/showthread.php?t=1472298&highlight=4ext
mb_guy said:
Use this guide, follow the steps exactly!! for installing 4ext second method, and the remainder of the document for firmware and the arhd rom. Your phone is already s-off.
http://forum.xda-developers.com/showthread.php?t=1472298&highlight=4ext
Click to expand...
Click to collapse
my kernel version is 2.6.35, there is nothing with kernel in order to do that right?
everything is official ROM? follow exactly step 1-step 5?
fookelvin said:
my kernel version is 2.6.35, there is nothing with kernel in order to do that right?
everything is official ROM? follow exactly step 1-step 5?
Click to expand...
Click to collapse
Yes if you want ics ARHD rom.. Follow both the first post and second post
Edit: wait you just want to do an official ota update?
Then maybe you are rooted..
Did you have any superuser or supersu app?
Otherwise might be recovery... From the bootloader (screen shot one).. Select recovery and the tell me what it shows
Sent from my HTC Sensation using xda premium
ganeshp said:
Yes if you want ics ARHD rom.. Follow both the first post and second post
Edit: wait you just want to do an official ota update?
Then maybe you are rooted..
Did you have any superuser or supersu app?
Otherwise might be recovery... From the bootloader (screen shot one).. Select recovery and the tell me what it shows
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Nop, i pretty sure i do not have superuser app inside my devices. Because once i get my phone, first thing i do is,
search for the update.
then i failed to update. So i think the current android version have problem. I wanted to fix it with official rom
fookelvin said:
Nop, i pretty sure i do not have superuser app inside my devices. Because once i get my phone, first thing i do is,
search for the update.
then i failed to update. So i think the current android version have problem. I wanted to fix it with official rom
Click to expand...
Click to collapse
anyway, how can I install "OTA_Pyramid_LE_hTC_Asia_HK_1.73.708.3-1.73.708.2_release_220041l8r0sjvypo1sal7n" this zip file VIA PC?
ganeshp said:
Yes if you want ics ARHD rom.. Follow both the first post and second post
Edit: wait you just want to do an official ota update?
Then maybe you are rooted..
Did you have any superuser or supersu app?
Otherwise might be recovery... From the bootloader (screen shot one).. Select recovery and the tell me what it shows
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
anyway, how can I install "OTA_Pyramid_LE_hTC_Asia_HK_1.73.708.3-1.73.708.2_release_220041l8r0sjvypo1sal7n" this zip file VIA PC?
Hey guys, i have new discover. I found Status(7) and installation aborted. What error is' it actually? i was trying to install the official update manually.
[/IMG]
fookelvin said:
Hey guys, i have new discover. I found Status(7) and installation aborted. What error is' it actually? i was trying to install the official update manually.
[/IMG]
Click to expand...
Click to collapse
It seems md5 mismatch.. The update is probably not for this phone or might have missed a intermediate update or the downloaded zip is corrupted
Sent from my HTC Sensation using xda premium
ganeshp said:
It seems md5 mismatch.. The update is probably not for this phone or might have missed a intermediate update or the downloaded zip is corrupted
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
so what should i do know ? T__T sad~~
Hello folks!
So, I got this HTC Sensation today which comes with ARHD v6.8.0.0. The phone came from UK and I'm in Portugal (if that makes any difference on this). The problem is that when I put my SIM card it says that the phone is locked. Ok, so I searched here ways to unlock it, but there is a problem. When I get into the bootloader I am not able to choose the recovery option, for some reason. I press volume down and it doesn't work. Not even, volume up or even the power button. It stays like the picture below and I need to take the battery off. Any ideas on how I can solve this? Plus, the phone is S-OFF, so shouldn't it be like simunlocked already?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
scanferr said:
Hello folks!
So, I got this HTC Sensation today which comes with ARHD v6.8.0.0. The phone came from UK and I'm in Portugal (if that makes any difference on this). The problem is that when I put my SIM card it says that the phone is locked. Ok, so I searched here ways to unlock it, but there is a problem. When I get into the bootloader I am not able to choose the recovery option, for some reason. I press volume down and it doesn't work. Not even, volume up or even the power button. It stays like the picture below and I need to take the battery off. Any ideas on how I can solve this? Plus, the phone is S-OFF, so shouldn't it be like simunlocked already?
Any ideas?
Click to expand...
Click to collapse
Try again without the sdcard in pal. Assuming that solves your issue then look for the sim unlock thread but use a different sdcard.
Tapped out from my sexy nexus 7
I tried without the sdcard and surpsingly it worked. But then I tried with another 2 sdcards I have and it still doesn't work...
scanferr said:
I tried without the sdcard and surpsingly it worked. But then I tried with another 2 sdcards I have and it still doesn't work...
Click to expand...
Click to collapse
It all depends on the sdcard tbh. Sounds odd but the more offical the better. Sometimes the bootloader won't register the sdcard unless it can read the cid of it, or the bootloader will loop waiting for it to load :-\ I've used official sandisk sdcards all the time and some work and others fail :-\ have you tried fresh formatts?
Tapped out from my sexy nexus 7
I have 2 sandisks and another one unbranded I guess. Format through PC? I can boot into recovery if I use ROM Manager but I can't get back into bootloader, it always get stuck in there...
scanferr said:
I have 2 sandisks and another one unbranded I guess. Format through PC? I can boot into recovery if I use ROM Manager but I can't get back into bootloader, it always get stuck in there...
Click to expand...
Click to collapse
Aye the PC should suffice. Also if you have your adb set up you can use adb reboot recovery .
I've also found that some phones just take there sweet time about reading the sdcard in hboot. Just give like 3 minutes and if it shows no signs of searching the sdcard then the sdcard is not good for the bootloader :-\
Tapped out from my sexy nexus 7
So the problem is the sdcard? WIth all the 3 sdcards, none of them will work? But I know, that the previous owner could go into bootloader and it worked nice. I don't see what's the problem here...
I'm trying to follow this guide:
http://forum.xda-developers.com/showthread.php?t=1232107
Is there any way to unlock the simcard without going into bootloader? Is that, I really wanna use the phone, otherwise it's gonna be useless...
scanferr said:
So the problem is the sdcard? WIth all the 3 sdcards, none of them will work? But I know, that the previous owner could go into bootloader and it worked nice. I don't see what's the problem here...
I'm trying to follow this guide:
http://forum.xda-developers.com/showthread.php?t=1232107
Is there any way to unlock the simcard without going into bootloader? Is that, I really wanna use the phone, otherwise it's gonna be useless...
Click to expand...
Click to collapse
The sdcards are fine enough for use with everything else bar the bootloader :-\ but that is the correct guide have you tried step one? And are you trying to put the sdcards in with the pg58img.zip / .nbh on it already? As you could try that and see how you get on, and then anytime you need to go to the recovery from bootloader then just take out the sdcard?
Tapped out from my sexy nexus 7
I did try step one mate, but I can't use it. And I did try to go on bootloader with the file on the sdcard... I don't know what else to do.
scanferr said:
I did try step one mate, but I can't use it. And I did try to go on bootloader with the file on the sdcard... I don't know what else to do.
Click to expand...
Click to collapse
Hmm. What sizes are the sdcard? Also are you on ics firmware?
tapped out from my sexy sensation XE
sdcards are 8GB each. How can check the firmware?
So, I updated to last firmware (3.33) and now I can get into bootloader but once I get there it starts loading for the PG58DIAG.zip but I don't have any file there with that name. Phone boots up normally tho, it's not in bootloop. I changed to SuperCID too and can't use my SIM card yet. Any ideas?
scanferr said:
So, I updated to last firmware (3.33) and now I can get into bootloader but once I get there it starts loading for the PG58DIAG.zip but I don't have any file there with that name. Phone boots up normally tho, it's not in bootloop. I changed to SuperCID too and can't use my SIM card yet. Any ideas?
Click to expand...
Click to collapse
You need to drop to ginger bread firmware for the file to work. Also if you have the pg58diag.nbh you can simply zip the file with no compression and place it in the root of your sdcard. But make sure to name it PG58DIAG.zip in caps as that seems to help. And if you can see if you can get access to a 2gb sandisk to test with
tapped out from my sexy sensation XE
heavy_metal_man said:
You need to drop to ginger bread firmware for the file to work. Also if you have the pg58diag.nbh you can simply zip the file with no compression and place it in the root of your sdcard. But make sure to name it PG58DIAG.zip in caps as that seems to help. And if you can see if you can get access to a 2gb sandisk to test with
tapped out from my sexy sensation XE
Click to expand...
Click to collapse
Do I need to flash a GB firmware now? I tried what you say mate but it doesn't work... It gets stuck on bootloader saying SD Checking... Loading... [PG58DIAG.zip] and nothing happens. I'm starting to lose my mind
It stays like this...
So, I can't get out of there...no matter how much I try, it never finds the goddamn file. Any ideas??
The user solved his issue in the end by buying a unlock code after a downgrade to gingerbread firmware and the bootloader would not register the diag file.
tapped out from my sexy sensation XE
Sorry for not updating, but that is correct. I got an unlock code and it worked. Flashed back to firmware 3.33 and ARHD 6.8.0.0 and all is working fine. But if I go on bootloader it still says that, it still tries to load that file even though I don't have any kind of those files on sdcard... Weird?
scanferr said:
Sorry for not updating, but that is correct. I got an unlock code and it worked. Flashed back to firmware 3.33 and ARHD 6.8.0.0 and all is working fine. But if I go on bootloader it still says that, it still tries to load that file even though I don't have any kind of those files on sdcard... Weird?
Click to expand...
Click to collapse
That is common behaviour of hboot.. Ignore it
Sent from my HTC Sensation using xda premium
Ok, mate! Thanks!
So I just got my Sensation today(unlocked, Bell version z710a) and followed this guide(http://forum.xda-developers.com/showthread.php?t=1631861) up to step 4A. The problem is, I forgot to enable smartflash(step 3A) before flashing the rom(same rom attached in step 4A). Now my phone won't boot up and I keep getting a message saying, "touch input stopped"(included pics of what it looks like).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this message keeps popping up. Sometimes I'll remove the battery and turn it back on and this will come up:
And I will be able to go through the normal setup with the message popping up every 2 seconds. But as soon as I press "finish" after going through the setup, the phone will still not boot up properly and get stuck on either the htc logo or a blank screen.
I would truly appreciate any help, I've tried wiping data and rebooting as well, and I have no idea what to do now. Thanks!
Try running an RUU
Sent from my Sense 5 powered Sensation
@noodleyhead
did you not forget to flashing boot.img too after installing the new rom with manual flashing.. after you know it's that you already forgot to enabled smartflash form 4ext recovery..?
Go to recovery ( remove battery , insert battery , hold volume down and power button )
Wipe data cache ,
Enable smart flash and flash Rom again
Itsakash said:
Go to recovery ( remove battery , insert battery , hold volume down and power button )
Wipe data cache ,
Enable smart flash and flash Rom again
Click to expand...
Click to collapse
I've tried that as well, but get no results. I also tried relocking bootloader and unlocking again, but i still end up and the lockscreen and go through setup wizard, only to end up stuck at the htc logo.
I tried doing RUU also, but I have a Bell Sensation, which is 3.32.666.13, and there isn't an ruu file available for that.
Any other ideas?
JJeamy said:
@noodleyhead
did you not forget to flashing boot.img too after installing the new rom with manual flashing.. after you know it's that you already forgot to enabled smartflash form 4ext recovery..?
Click to expand...
Click to collapse
Yeah i realized afterwards and tried that also, but i get the same results.
ShadowCodeGaming said:
Try running an RUU
Sent from my Sense 5 powered Sensation
Click to expand...
Click to collapse
I was about to, but I have a bell sensation on 3.32.666.13, and I haven't been able to find a download for my particular version. If you know of any others that will work, let me know.
noodleyhead said:
I was about to, but I have a bell sensation on 3.32.666.13, and I haven't been able to find a download for my particular version. If you know of any others that will work, let me know.
Click to expand...
Click to collapse
I think any z710a ruu should work
Sent from my Sense 5 powered Sensation
Ok, I tried wiping data and enabling smartflash, then reflashing the rom, but now when i try to boot it up, it won't go past the white screen with the htc logo, no quietly brilliant coming up.
Anyone else have an idea of what I can try? I'm getting desperate now, nothing seems to be working.
ShadowCodeGaming said:
I think any z710a ruu should work
Sent from my Sense 5 powered Sensation
Click to expand...
Click to collapse
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
noodleyhead said:
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
Click to expand...
Click to collapse
I think this one http://www.shipped-roms.com/downloa...0U_10.12.9007.21_2M_release_200555_signed.exe but ill have a closer look when I get home in a few hours
Sent from my Sense 5 powered Sensation
ShadowCodeGaming said:
I think this one http://www.shipped-roms.com/downloa...0U_10.12.9007.21_2M_release_200555_signed.exe but ill have a closer look when I get home in a few hours
Click to expand...
Click to collapse
Thanks, but I think that is the older version(from gingerbread I think) and after I searched around I think that one will not work. I may be wrong, so you are certainly welcome to take a closer look whenever you have tim after getting home.
Thanks so much for taking the time to help me! At this moment, my phone will not boot up past the white screen with the htc logo(no quietly brilliant coming up) and I am getting very desperate. I wiped everything that I possibly could in recovery, reflashed the rom after enabling smartflash, and my result is being stuck on the same htc screen. Am I bricked beyond repair? I am seriously getting very scared now. Anyways thanks for helping, any other ideas are welcome.
noodleyhead said:
Can you link me to one? I can't tell which ones are z710a and which ones aren't.
If you can find one on here that might work for me: http://www.tsar3000.com/Joomla/index...oads&Itemid=98
or here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid
or anywhere else you might be able to find one.
Again I have a bell sensation 3.32.666.13. I was able to find a zip file here: http://www.androidruu.com/?developer=Pyramid (3rd one down)
but its a zip file, not exe, so not really sure what thats for. Thanks so much for the help!
Click to expand...
Click to collapse
your version show with zip file in here http://www.androidruu.com/?developer=Pyramid is a update OTA version..not full completed RUU..
anyway may i know what custom rom do you installed before..?, did you already tried another custom rom..?
RUU
noodleyhead said:
I've tried that as well, but get no results. I also tried relocking bootloader and unlocking again, but i still end up and the lockscreen and go through setup wizard, only to end up stuck at the htc logo.
I tried doing RUU also, but I have a Bell Sensation, which is 3.32.666.13, and there isn't an ruu file available for that.
Any other ideas?
Click to expand...
Click to collapse
http://htc.vi8.info/Stock-RUU/
I thing here you will find what you need
JJeamy said:
your version show with zip file in here http://www.androidruu.com/?developer=Pyramid is a update OTA version..not full completed RUU..
anyway may i know what custom rom do you installed before..?, did you already tried another custom rom..?
Click to expand...
Click to collapse
I was following this guide: http://forum.xda-developers.com/showthread.php?t=1631861
and went up to step 4A, and used the same rom linked to dropbox download in that step.
Problem was, I forget to enable smart flash before flashing(step 3A), so I followed extra step 1 in that same thread, which is flashing boot.img, but that didn't work either.
Abdullahku said:
http://htc.vi8.info/Stock-RUU/
I thing here you will find what you need
Click to expand...
Click to collapse
Thank you, but I have a bell sensation, I dont think any of those would work? Or would they?
noodleyhead said:
I was following this guide: http://forum.xda-developers.com/showthread.php?t=1631861
and went up to step 4A, and used the same rom linked in that step(its a version of Android Revolution).
Problem was, I forget to enable smart flash before flashing(step 3A), so I followed extra step 1 in that same thread, which is flashing boot.img, but that didn't work either.
Click to expand...
Click to collapse
just tried installing another custom rom and don't forget to anabled smartflash first...try this ROM
then after that if your phone success to booting normally..then you can make a goldcard to prepare..if sometime while you needed return your phone to the stock..then you don't worried again to searching RUU that are suitable with your phone..
noodleyhead said:
Thank you, but I have a bell sensation, I dont think any of those would work? Or would they?
Click to expand...
Click to collapse
I don't know :\... but also you can try to turn off your device, and remove the battery, and put it back, then press power button + volume up button & choose factory rest, it might work
JJeamy said:
just tried installing another custom rom and don't forget to anabled smartflash first...try this ROM
then after that if your phone success to booting normally..then you can make a goldcard to prepare..if sometime while you needed return your phone to the stock..then you don't worried again to searching RUU that are suitable with your phone..
Click to expand...
Click to collapse
THANK YOU SOOOOOO MUCH. It worked.
noodleyhead said:
THANK YOU SOOOOOO MUCH. It worked.
Click to expand...
Click to collapse
glad to hear that..mate..
now you can make a goldcard to your sd..to prepare..someday while you needed it to return your phone to the stock you just need find the latest RUU..
and just a tip..just do a backup of your rom now first from recovery..before you flashing any other rom again later..
hope you'll enjoy that rom..