Database Info

O2 XDA II Mini Original Rom WWE - PLEASE!

Hey guys,
Well I succeeded in upgrading to Anansky's BigStorage ROM and was very satisfied, but now my stupid speaker broke (I have a similar problem to other users where they can hear sound if they blow into the speaker). I have to return the Magician so I need to revert back. Can someone PLEASE upload the original XDA II ROM PLEASE???
Here's a list of instructions on how to backup the ROM:
Backing up your ROM can be done by connecting your Magician to the PC through the data cable when you first uncheck the USB connection of active sync.
If your Magician connects with active sync because you didn't uncheck the USB connection in the active sync connection settings then you will not be able to backup your ROM to an SD memory card.
1. Before connecting your Magician you should bring it into the boot loader mode. This can be done by simultaneously pressing power + camera buttons and at the same time the soft reset button with the stylus.
2. After connecting your Magician to the PC through the USB in boot loader mode and having your SD card inserted into the MDA, you run romupdate.exe.
3. Then choose the USB connection in the connection settings of romupdate.exe window and click on ok. After that a terminal window will popup in that window.
4. Type d2s and press enter. Your Magician will start copying the ROM to the sd card. The screen of your Magician will be dark (no light), but you will see it counting up to 100%. When it reaches 100% it will say it is calculating the checksum. Give it some time till its done and it will say checksum ok.
5. After finishing the transfer of the ROM from your Magician to the SD card, put your SD card into an SD card reader connected to your pc. Your pc might pop up a warning message that says your SD Card is not formatted would you like to format? Click No and open a Command prompt (DOS) window.
6. Change directory to your root directory (cd c:\) and run the command ntrw read o2orig.nb1 x: where x is the drive letter of your sd card. That command will create the ROM Backup file of your ROM into your C drive root directory by the name of o2orig.nb1. Make sure you keep o2orig.nb1 in a safe place and use a copy of that file for the rest of the procedure. Note that after finishing the copy from your SD card to o2orig.nb1 file ntrw might give you an error, just don’t pay attention to it.
7. WinRAR the o2orig.nb1 file, then upload it to the XDA Developers FTP .[/i]

No one wants to help?

The question is why havent you got a backup?? You were told to do this in the first instance should anything go wrong!!

somebody apparently has uploaded the O2 mini original rom, check it out!

The answer to this was I was using my digital camera as an SD reader...and the backup didn't work properly for some reason. So now I have nothing.
The backup (I think you're talking about the O2 Original Dump Rom) doesn't work for me. I have a 1.11 version of the O2 Asia ROM, but I'd rather have the original WWE. Oh yes, and I've tried several times with the "Original Dump Rom" using 220, 415 and 416 bytes...nothing works.

This may work for you - use the romupdate software to get the rom image of your device to the sd card. By this stage you have an edited rom image on the pc. Use ntrw to write that image over the top of the sd card that you have just written to with romupdate. Then plug it into the ppc. Do not format the sd card in the immediate procedure at anytime. For whatever reason I think the romupdate software puts a format on the sd card which the ppc recognises. There were a number of errors on the ppc screen just after installation however when you push the reset button hey hey the original splash screen boots up. Prior to this check that the edited rom header is 416, in my efforts it was not 415. The RomMiniOrg.nb1 image was good with the only NON change being the radio which remained at version 1.11 but I downgraded it to 1.05. I don't think the service centre will worry to much about this should you need it. Goodluck with this, it worked for me.

Hi yozhek,
Thanks for the help. I did what you said but it still didn't work. However, I used O2_mini_asia from the FTP to downgrade my extended rom, protocol and rom version...then I found the Radio downgrade on the FTP and downgraded to version 1.01.
now everything is original!
I didn't know that the Nb1 files did not include the radio stack downgrade so I had to downgrade that seperately.

the command in the romupdate program basically determine which image to backup.
d2s for rom, but I am not sure what's the other command for extended rom and radio. Anybody?

Can I use MaUpgradeUt_noID.exe to change the ROM on my mini with the o2mini_asia.nb1 ?

miniuser: no
you will have to use the process as described in procedure.doc (available in the FTP under anansky's bigstorage folder)

I did as described in the procedure.doc. I have run this command
ntrw write o2mini_asia.nb1 e: and then inserted the SD card into my mini and pressed the power+camera+soft reset button
but it is not doing anything, it has stopped at "Serial" above and v1.00 below for an hour now. Any suggestions?
cheers
mini_user

I tried it second time, now it says
SD DOWNLOAD
==========
SECTIONS=1
Not Allow Update
Any Suggestions?
Cheers

Sorry for the last post, was trying out something else.
I am using a 256MB SD card and the size of the rom is only 127MB after ntrw, does it make any diff??

you can always ntrw write a 127mb rom image into a 256mb sd card.
the rom flash will not work (and hence the no update allowed message) if your rom image in your sd card is invalid for some reason. I make a bobo previously, trying to copy 416byte of anasky rom into my original rom, instead of the other way round. And it give me that error message. After realising my mistake, and did the right modification, the flash went through successfully. so double check your rom header edit if you are not able to proceed to the flash step.

I have a mini with qteck 1.11.00 WWE
and I have download the o2mini rom from xda ftp and have got a 256 mb card
if I want to flash my mini with the o2mini rom the are these the steps to follow
1. dump qtek rom into card
2. copy it to pc
3. copy 1st 416 bytes of qtck into o2mini rom
4. dump o2mini rom into card
5. put mini into bootloader mode
6 update with mini rom
cheers

zenkinz said:
somebody apparently has uploaded the O2 mini original rom, check it out!
Click to expand...
Click to collapse
where is the file?

guys i need help !!!!!

hey guys i was using JW rom from last 1 year and few hrs back i tried upgrading it to tomals latest rom but was unsuccesful and now my device is not working . my device is showing just USB and Version 2.01 below i tried everythng . I am using windows 7 ultimate on my pc . please help me guys i am also attaching the error i am getting ( plz see the images ) please help me out and rep me asap

Hi japun,
Have a read of this:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista

thanx for the rep simon but i have tried it my device is in bootloader i tried this but still its giving me those error the 1 i showed through pics . have no idea what to do reply if u have any other method

Errrrr.....
have u tryed flashing with rhe SD card and Simc ard taken out?
becuase the SD card can trip up the flashnig sometimes

Try to do a doc format and reflash without sim card and sd card
Hope it helps,

i tried flasing without sd and sim card still no sucess

hey what is doc format > can u tell me hw to do that thanx

HI JAPUN
japun said:
i tried flasing without sd and sim card still no sucess
Click to expand...
Click to collapse
DO this ... but you need windows xp for this I don`t think you can do on vista or windows7 ... anyway good luck.....
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like.
mtty is here >>
http://forum.xda-developers.com/attachment.php?attachmentid=32963&d=1168450223

japun said:
hey what is doc format > can u tell me hw to do that thanx
Click to expand...
Click to collapse
Have a read on the Wiki and you´ll find it
Most likely will fix the prob

ramtajogi said:
DO this ... but you need windows xp for this I don`t think you can do on vista or windows7 ... anyway good luck.....
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like.
mtty is here >>
http://forum.xda-developers.com/attachment.php?attachmentid=32963&d=1168450223
Click to expand...
Click to collapse
ramtajogi is right, u need Windows XP to flash on (either upgradeing or Downgrading)

THANKS!!
I'm not sure about the original poster, but you guys saved MY ass... I tried to upgrade my Universal from Vista, and got stuck in bootloader screen. Using the mtty tool and the explanations in the wiki I managed to re-initialize the rom upgrade process on my other pc running windows XP....
Thanks a million!!

[Q] No image found

I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)

super2 said:
I have windows7 on my pc, and when i try to install Rom it just says img not found... Same if i just copy it onto the sd(via usb transfer if it matters)
Click to expand...
Click to collapse
If you could give more information about the complete process that you have done, it would be easier for someone to help you.
For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
I am also running Windows 7 on my computer and have no trouble at all.
I think it may be something to do with the process you are doing.
Let us know what it is. I'm sure we'll be able to help in some way.

For example, what is the name of the ROM?
How are you decompressing it?
Are you trying to flash via WMDC or SD Card?
It is http_://forum.xda-developers.com/showthread.php?t=536751 this one and i already have installed max sense on the phone, and what to change it tolower ram usage and etc... Tried titantium and sense 2.1 no success. I tried via the usb connection. but cannot locate a device, after it is being rebooted. And then i tried to transfer the divimg.nbh to the sd card and reboot, no success - no image found.

one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck

Please post [Q] in general section.

borisku said:
one thing is clear: if you try to install the rom from sd card, your Rom name ("divimg....") is wrong. It should be something like "raphimg.nbh".
How do you establish connection between PC and your TP? There are reported some difficulties connecting your TP with the PC via Windows 7 using device center. Using the search may help...
good luck
Click to expand...
Click to collapse
I see, that should be the problem, thank you. Yes i am using the device center.

Divimg.nbh? Where'd you come up with that, lol?
It needs to be named RAPHIMG.nbh. Make sure the extension is correct, and you don't have RAPHIMG.nbh.nbh, or something like that. And the card has to be formatted to FAT32, and the image must be on the root of the card. That's all there is to it. You also need to have hard spl.

It worked just with the normal file.

same problem
Hi there...
I try to flash the new rom on my TP, and:
1) HardSPL is done, I flash one time a month ..
2) via SD card is written: Image not found - card has been formatted to FAT32, name of the image IS RAPHIMG.nbh.
3) via USB installation goes to the installation screen where "Image not found" is written also ... Active sync has been made, I've checked, that "USB support" is OK.
I have placed ROM and the *.exe file into one folder ..
Can anyone help me?
EDIT: Win XP Prof. 32BIT, Touch Pro and the ROM is ENERGY 23699 Sencity/Touch of Glass - tried both of them.

[Q] [Prob] Goldcard doesn't work - "not allow"

Hello,
I've decided to unlock and flash my HTC 7 Mozart. So, I have to downgrade SPL. I thought the method via goldcard would be best for this and so I tried it. Soldered a perfect USB cable for that according to the pictures shown on separate threads here.
First of all, my phone specs:
HTC 7 Mozart
Got it with Mango 7.5
Firmware version atm: 2250.21.51201.401
-> So I think Phone ROM version: 5.12.401.01
B/c of my CV I have a HTC_Europe operator.
To downgrade SPL, I downloaded this:
3.2 BR: RUU_Mozart_HTC_Europe_1.26.401.03_Radio_5.51.09.06 _22.30.50.09U_by_ansar
Right until here, or am I false?
I've put the .nbh (called MOZAIMG.nbh) to my SD card (also tried USB stick), used the GoldCardtool 0.0.5 and patched the GoldCard.img (a generic one) to my removable stick/sd card. Then I just put everything in and started my phone in USB host mode. Well, it worked flawlessly, but as it loads the data from my stick/sd card, it shows up:
"not allow"
...
and later: "serial"
I don't know why this happens. I think, the gold master patch wasn't done properly? Do I have to do the thing manual in a hex editor? I've read that, but is it truly the thing I have to do?
Thank you!
Keynot

why you dont use the ansar slspl rom?

Well, I just followed this tutorial:
http://forum.xda-developers.com/showpost.php?p=21054629&postcount=3
Thanks for your hint.
I've tried several ROMs and always get the same Errors...
When trying with goldcard, every ROM I tried shows "Not allow".
And every time I try with standard USB flashing, I get an Error: "invalid Vendor ID".
Is it possible, that my device is no "Europe device"?. I've found several threads about this topic, but none helped...:-(
Tried following ROMs:
RUU_Mozart_HTC_Europe_1.26.401.03_Radio_5.51.09.06_22.30.50.09U_by_ansar
RUU_Mozart_HTC_Europe_5.11.401.01_SLSPL_Signed_by_ansar
RUU_Mozart_S_HTC_Europe_5.13.401.01_5.71.09.02a_22.51.50_RELEASE - to upgrade SPL to 5.13. some claimed SLSPL could work then. but nothing changed. Error or "Not allow"...
Pls help!

Buddy me to same problem but I may say that u must get cid of an sd card generate proper gold card img file then flash it.
Have u patched it(sd card) with its own cid or anyone else.
try to get gold card img for the one of your sd card ie get CID of sd card.
Refer this link-
http://forum.xda-developers.com/showthread.php?t=1248095
make ur sd card gold card and try again.
Tell me if it works.
Good luck mate

Hey bro belive me this problem is very easy...
Me too have same phone and same operator(EUROPE)401 and i already flashed custom rom.
I also encounter this same problem my SDcard(2gb)didn worked not allow showing then i dont know how but i downgraded my mozart by patching my sd card's goldcard to my 4gb flashdrive its of sandisk.
This problem lies in Goldcard and wrong usb storage(pendrive,sd,etc) device.
PSS both hex editor and goldcard patcher do same work tested by me
For a rom you can check this http://forum.xda-developers.com/showthread.php?t=858599 it worked for me.

Need for Phicomm e670 ROM

Last night i updated my Phicomm e670 and now i'm stucking, staring at my phone's logo unable to start. So i decided to do a flashing myself but i would be needing the specific ROM for my phone model. Can someone help me find it? Where can i get the file? Please ...

Go to phicomm website. There you will get updated latest firmware of e670. Download it. Place it on your memory card. Then restart phone pressing power' and voume up button together in stock recovery. There u can update ur mobile to stock rom updated. Hope it helps.

Problem!
Thnks 4 da rply. I still have a problem regarding to that because when i enter update from sd card, nothing shows except sd card not mount. When i connect with cable my computer cannot detect my device. What to do? Please help..

have u download the updated stock rom (around 785mb) from phicomm website? If yes then Just place it in ur sd card by a card reader. Then insert sd card in ur mobile. Then proceed in mobile as i stated in above post. U need not connect ur mobile to pc. Feel free to ask. It should not show mounting problem if ur sd card is not damaged.

Still problem
Yes i've downloaded the updater rom from phicomm.in. My problem is that when i enter recovery mode like u said and enter update from sd card, there is nothing even though i copied the rom into my sd card (which is fine) from my pc and it still shows unmount problem. When i tried using cable, my computer cannot detect properly. What could possible be the problem? I've bought this just last week. This is happening all because i updated the system which shows about 38mb which I should have never done it.

Sorry for late response. I can understand your problem. I had also faced same issue when i updated the 38mb file because i was trying to update it without unrooting my mobile which was previously rooted by kingroot apk. After 3/4 days i have updated it using the method i had mentioned already. I m now out of idea, which caused u the upgrading issue. Small thought, did u tried to upgrade it when it was connected to pc by usb ? It doesn't need to connect to pc while installing.
---------- Post added at 12:41 AM ---------- Previous post was at 12:32 AM ----------
Another thought. Back up sd card data in pc. Format the sd card in fat32 system in 'hp usb formatter ' (download googling it on net) or pc's native formatter applicatin in pc. Then place rom and try to upgrade as mentioned earliar.
---------- Post added at 12:46 AM ---------- Previous post was at 12:41 AM ----------
Or try a new sdcard

hello
Brother one solution for your mobile
Go to phicomm e653 firmware from Google search
File approximately 800 mb
After download install Qualcomm driver in your PC
And also download QPST software latest version
from Google all formalities complete then you
contact me what's app 9888105864

conformation abou the download of stock rom
Romery said:
Yes i've downloaded the updater rom from phicomm.in. My problem is that when i enter recovery mode like u said and enter update from sd card, there is nothing even though i copied the rom into my sd card (which is fine) from my pc and it still shows unmount problem. When i tried using cable, my computer cannot detect properly. What could possible be the problem? I've bought this just last week. This is happening all because i updated the system which shows about 38mb which I should have never done it.
Click to expand...
Click to collapse
bro where and how to download the stock rom of phicom e670

how to update phicomm e670 android version...lollipop to marshmallow

need for phicomm e670 orignal rom
anant sachdeva said:
Brother one solution for your mobile
Go to phicomm e653 firmware from Google search
File approximately 800 mb
After download install Qualcomm driver in your PC
And also download QPST software latest version
from Google all formalities complete then you
contact me what's app 9888105864
Click to expand...
Click to collapse
sir pls share phicomm e670 orignal flash file