[Q] Bootstrap/Safestrap - Motorola Atrix 2

http://forum.xda-developers.com/showthread.php?t=1315982
I tried this on my A2 and it works.. Not sure if it helps yall to know that or not. I was able to boot into recovery by holding volume up and down while powering on then selecting bp tools. Idk where to post this either.. Could we use this to install custom roms? The droid 3 has similar hardware to ours, What would happen if I used safestrap and installed a droid 3 rom?

Do not try to install a Droid 3 rom. While this may help us in some way the architectures of the devices are very different and you will more than likely end up with a bricked device.

If your able to dual boot with this then wouldn't that mean that i'd be unable to brick my phone because the os that i'm flashing is installed to a second partition? ...It is able to dual boot android on a droid 3.
Nvm.. It cant mount /emmc

Jimmy273 said:
Do not try to install a Droid 3 rom. While this may help us in some way the architectures of the devices are very different and you will more than likely end up with a bricked device.
Click to expand...
Click to collapse
Please listen to Jimmy, you are talking about installing something that was not meant for our phone. As similar as they may seem they aren't the same. No one wants to see you brick your phone but at the same time YOU'VE BEEN WARNED AND WE HAVE NO WAY OF HELPING YOU RECOVER RIGHT NOW!

I didn't flash it.. It cant mount /emmc which i assume is where the second file system goes so, I don't wanna brick my 4th atrix just yet.. But the backups that the safestrap recovery make are just over 200mb bigger why is that? and there is a boot folder but its empty. Will this be any help in the custom roms area?

Someone already posted something like this from the Bionic which is even cloder to our phone. Like they said PLEASE DONT FLASH THAT ROM...or any ROM not made for the Atrix2. To answer your questions
EMMC is internal media space, or internal storage that is user accessible. We do not have that space, our 8gb of internal space is not user accessible.
The backups are 200mb bigger because of Webtop (assuming you are comparing it to a Droid 3 backup)
I do not know why the boot folder is empty. A reason why it may not be safe to use this bootstrap.

Nope, I'm comparing backups I made from my a2. one with the atrix bootstrap and one with the droid safestrap. the one made with safe strap is actually over 300mb bigger. Is that because of webtop?

Not that i want to see you brick your A2, but were you able to restore a backup? That is the only that scares me about doing any kind of tweaks. I like to do backups anytime I am doing any kind of changes, just in case i blow it up. Once we get an SBF to flash back to stock, I won't be worried.

Related

[Q] how 2 b pr0 leik u guys

Okay. Ignore the title, I couldn't think of anything to put. In short, I want to know about roms, about clockworkmod, cyanogen mod, and stuff like that. What they do, how to put them on, and I pretty much wanna know about the general stuff you do past rooting your phone. And I know that the section says No Noobs, but technically, I'm a newb, as far as I know i'm not annoying anyone or being completely nooblike.
Mainly with cyanogen. I read the instructions, and they seem too, I dont know, simplistic. I'd prefer exact details. Like, after I have clockwork mod installed, and I flash cyanogen, can i restore all the stuff I had on it? And once cyanogen is on there, is it already rooted, or must i root again? And if someone would explain to me how clockworkmod works in the first place. And how would I flash cyanogen? I thought it'd be through clockworkmod, but if I wipe everything and factory reset, wouldn't clockworkmod be gone?
My phone is a Samsung Galaxy S (Vibrant or not vibrant, I dont even know) It's a GT-i9000M. Running android 2.2.1, Rooted, I have clockworkmod installed, but still no idea what to do past that point. Also, my Kies isn't telling me about any 3.x upgrade, so how would i go about manually installing a new version of android? I know it has to do with Odin, but whenever i tried i ended up not doing anything.
And one last thing about MetaMorph. Where could i find themes for it? And do i need to have a certain Rom running in order to use metamorph themes?
I'm mainly used to iPhones and such, where there isnt really much to do besides jailbreaking and such, and moving on to android phones is pretty intense. XD So much more to do with Android phones.
Well uh, thats about all i can think of at the moment. Also please post anything you feel that a (somewhat) newb to android modding should know.
Sorry for all the questions, and to those that help me, I love you. <3
And if any moderators deem this thread as against the 'No Noobs' rule, at least send me a message telling me you deleted it, or else I'll end up looking endlessly through the forums for my thread. I've done that before, not fun. LOL (Couldn't find a 'My Threads' thingy on the forum i was using.
Gutana said:
Okay. Ignore the title, I couldn't think of anything to put. In short, I want to know about roms, about clockworkmod, cyanogen mod, and stuff like that. What they do, how to put them on, and I pretty much wanna know about the general stuff you do past rooting your phone. And I know that the section says No Noobs, but technically, I'm a newb, as far as I know i'm not annoying anyone or being completely nooblike.
Mainly with cyanogen. I read the instructions, and they seem too, I dont know, simplistic. I'd prefer exact details. Like, after I have clockwork mod installed, and I flash cyanogen, can i restore all the stuff I had on it? And once cyanogen is on there, is it already rooted, or must i root again? And if someone would explain to me how clockworkmod works in the first place. And how would I flash cyanogen? I thought it'd be through clockworkmod, but if I wipe everything and factory reset, wouldn't clockworkmod be gone?
My phone is a Samsung Galaxy S (Vibrant or not vibrant, I dont even know) It's a GT-i9000M. Running android 2.2.1, Rooted, I have clockworkmod installed, but still no idea what to do past that point. Also, my Kies isn't telling me about any 3.x upgrade, so how would i go about manually installing a new version of android? I know it has to do with Odin, but whenever i tried i ended up not doing anything.
And one last thing about MetaMorph. Where could i find themes for it? And do i need to have a certain Rom running in order to use metamorph themes?
I'm mainly used to iPhones and such, where there isnt really much to do besides jailbreaking and such, and moving on to android phones is pretty intense. XD So much more to do with Android phones.
Well uh, thats about all i can think of at the moment. Also please post anything you feel that a (somewhat) newb to android modding should know.
Sorry for all the questions, and to those that help me, I love you. <3
And if any moderators deem this thread as against the 'No Noobs' rule, at least send me a message telling me you deleted it, or else I'll end up looking endlessly through the forums for my thread. I've done that before, not fun. LOL (Couldn't find a 'My Threads' thingy on the forum i was using.
Click to expand...
Click to collapse
Well, I guess to first start off, here's a few pointers:
1. don't put the title in 1337 (people will most likely not click on it, thus no help)
2. you're right about this being the wrong thread. You should post this under the Samsung Galaxy S section (google your model number and you'll see it instantly) and should probably try the Q&A moreso than a general area (but it doesn't really matter all too much)
3. no matter how nooblike you may or may not be, you're still a noob XD
Now that we've gotten past the anally parts and all (hate doing that, but gotta =P), let's talk about what you came here for: answers.
Let's start with some definitions:
ROMs - these are the (usually modded) softwares that you flash to your phone. Depending on which phone you have, you can only flash ROMs made for your phone. Of course, if you have root/custom recovery, you can also install custom ROMs.
ClockWorkMod (CWM) is a recovery system made in order to allow people more features while they're in recovery mode. Of course, this is one of a few out there, but people stick to CWM cause of its huge support plus it's popularity. When you think of CWM, think of custom features being installed in (almost) one step (modding files and such will be taken care of for you, so you don't have to do it yourself). You can usually also fix a bricked system this way by reflashing either the entire ROM or the boot.img/other files (we'll get to this in a second)
CyanogenMod (CM) is an example of a very popular custom rom. They have a great team and usually is available for most devices, which in turn makes them so popular. It is widely supported and has a lot of extra features like updating to the latest OS and features not previously available on your phone. It's skinned, but usually follows the stock Android look for the OS in which they've skinned.
lol The reason why the instructions look so simple is because they've taken out all the hard work and all the stuff where you can possibly screw up your phone, so that they don't get a million messages saying "OMG MY PHONE BRICKED WHAT HAPPENED" and stuff like that. Protects them, makes it easier for you. If you had made a backup before you flashed CM (usually you only have to back up whats on the phone if it has internal and external memory, but back up your sd card always just in case. never hurt to), then yes. If you backed it up with your previous ROM, then you'll probably need to revert to get it back. If you didn't, chances are whatever you didn't backup and didn't sync, is safe to say gone. You can try recovering it using a recovery software on the computer like i detailed here for another person, but of course you'd skip the whole trying to save the phone part and just start with mounting the phone to your computer and running the software.
CM is a custom rom, and so most (if not all) custom roms have root preinstalled (besides, who wouldn't want root?!) As for CWM, it works by being (usually) flashed into the recovery partition of your phone. The nice thing about the phone is that it's split up into parts: boot, recovery, system, and some other ones i can't think of off the top of my head. Those three are important, as if you get a softbrick, you might still be able to recover all your data simply by using CWM/fastboot (a dev-tool used to flash/unlock, but only available in certain phones, as it is disabled usually) to reflash the boot.img (one requires command line, whereas CWM only needs you to flash a created/pre-made package). Also, since they're in separate partitions, even if your system and boot.img doesn't work, you can probably still access recovery (unless you screwed up really REALLY bad, and in that case I can't help >.<)
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
At this point, I would look into a few things. One is skinning your phone (though you probably can't do too much if you don't want to touch system files). If you find a psuedo-rom (slightly modded) that themes it, that's your best bet. Another is gaining access to certain features in apps you didn't have before (i.e. androidLost, LBE Privacy Guard, titanium backup) and of course more control by the ability to control your system files (if you know what you're doing, of course). Lastly, you can use stuff like MetaMorph to theme out certain sections of your rom (provided that they give you one compatible with your phone model/rom), minus having to flash it and having more fine-tuned controlled. Usually, Metamorph will run on all ROMs, but it doesn't guarantee that there'll be stuff for every ROM. Also, want themes? google it (google is your best friend!)
Kies won't tell you that you have an upgrade because it is ROM-dependent. It looks for their official ROM and says "Hey, this guy has our ROM. Check for an update". Think of owning a custom rom like being kicked out of your family. You won't get anymore updates from them XD. However, if you're looking to get the latest updates, check out the Samsung Galaxy S Dev threads. They will usually have another method of loading in the new ROM into your phone. And if you want to stick with ROM Manager, shell out for premium and they'll include "Check for Updates" in ROM Manager, along with several other functions (though you can check for free via computer/browser ). Mostly, manually updating the software requires the "Install from SD Card" feature in CWM/other recoveries, so you don't have much to worry about.
Odin is, as you stated, most likely your best bet. Not too many people repackage official ROMs into easy-to-flash zips. Odin is the Samsung equivalent to Motorola's RSD Lite from what I googled (i have motorola, so no exp. on odin >.<) It's mostly like a dev tool allowing you to flash/re-flash phones and is also usually your one-way ticket out of a semi/full brick (assuming you didn't mess up the hardware and you can get into download mode). It's the flashing tool that can access the core system of the phone even without root and allows you to reflash OFFICIAL ROMs. Should you use Odin (should be your last resort), you WILL lose root and all your data. No questions asked. Its like reinstalling everything to the state in which you got it in when you bought the phone. Word of advice: BACK UP OFTEN! (did i forget to mention Titanium Backup? )
Yeah, the transition from Apple to Android is so different and had I not had experience with my PSP, i'd be dying with the information overload. However, just read a lot of stuff on the forums (*cough*general android forums*cough*) and you should be just fine. We have an excellent community here that will try our best to fix whatever problems you encounter (note the key word: try. we're not gods XD) You'll get the hang of it soon enough.
Oh, well, I don't want to keep you for much longer, but since you mentioned something that any noob should know, it's definitely ADB (Android Debugging Bridge). This is where you'll probably spend a lot of time, as people's fixes usually involve shell (terminal for your phone). If anything, get acquainted with it, as it might save your butt in the future/unlock a few extra features for you ;D .
Well, that's all i can think of, and honestly, after typing this thing up for about an hour now, I think I'm going to grab me some breakfast Good luck to you and welcome to the Android commmunity! (and next time, remember to post in the right place! XD)
~jojojohnson7410
P.S. PM me if you need anything. =]
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
Click to expand...
Click to collapse
Just to nit-pick a bit. CWM is part of the recovery partition, and unless the Galaxy S is different from every other android device, flashing will not remove it. ROM Manager and CWM are two different things. ROM manager will allow you to download the roms, which will then instruct CWM to flash the rom (when it reboots).
jojojohnson7410 said:
Well, I guess to first start off, here's a few pointers:
1. don't put the title in 1337 (people will most likely not click on it, thus no help)
2. you're right about this being the wrong thread. You should post this under the Samsung Galaxy S section (google your model number and you'll see it instantly) and should probably try the Q&A moreso than a general area (but it doesn't really matter all too much)
3. no matter how nooblike you may or may not be, you're still a noob XD
Now that we've gotten past the anally parts and all (hate doing that, but gotta =P), let's talk about what you came here for: answers.
Let's start with some definitions:
ROMs - these are the (usually modded) softwares that you flash to your phone. Depending on which phone you have, you can only flash ROMs made for your phone. Of course, if you have root/custom recovery, you can also install custom ROMs.
ClockWorkMod (CWM) is a recovery system made in order to allow people more features while they're in recovery mode. Of course, this is one of a few out there, but people stick to CWM cause of its huge support plus it's popularity. When you think of CWM, think of custom features being installed in (almost) one step (modding files and such will be taken care of for you, so you don't have to do it yourself). You can usually also fix a bricked system this way by reflashing either the entire ROM or the boot.img/other files (we'll get to this in a second)
CyanogenMod (CM) is an example of a very popular custom rom. They have a great team and usually is available for most devices, which in turn makes them so popular. It is widely supported and has a lot of extra features like updating to the latest OS and features not previously available on your phone. It's skinned, but usually follows the stock Android look for the OS in which they've skinned.
lol The reason why the instructions look so simple is because they've taken out all the hard work and all the stuff where you can possibly screw up your phone, so that they don't get a million messages saying "OMG MY PHONE BRICKED WHAT HAPPENED" and stuff like that. Protects them, makes it easier for you. If you had made a backup before you flashed CM (usually you only have to back up whats on the phone if it has internal and external memory, but back up your sd card always just in case. never hurt to), then yes. If you backed it up with your previous ROM, then you'll probably need to revert to get it back. If you didn't, chances are whatever you didn't backup and didn't sync, is safe to say gone. You can try recovering it using a recovery software on the computer like i detailed here for another person, but of course you'd skip the whole trying to save the phone part and just start with mounting the phone to your computer and running the software.
CM is a custom rom, and so most (if not all) custom roms have root preinstalled (besides, who wouldn't want root?!) As for CWM, it works by being (usually) flashed into the recovery partition of your phone. The nice thing about the phone is that it's split up into parts: boot, recovery, system, and some other ones i can't think of off the top of my head. Those three are important, as if you get a softbrick, you might still be able to recover all your data simply by using CWM/fastboot (a dev-tool used to flash/unlock, but only available in certain phones, as it is disabled usually) to reflash the boot.img (one requires command line, whereas CWM only needs you to flash a created/pre-made package). Also, since they're in separate partitions, even if your system and boot.img doesn't work, you can probably still access recovery (unless you screwed up really REALLY bad, and in that case I can't help >.<)
Observant you are =] Yes, if you were to flash CM, your CWM will be gone (i don't understand why most people don't just bake it into the ROM in the first place) but, not all is lost. Just go back into the Android Market and redownload ROM Manager. Of course you'll need to open it up and flash the same exact recovery again (annoying, isn't it?) but unless you know how to mod zip/img files and edit the script, you'll just have to make do with that. If you do, you could just (usually) take out the recovery partition and just leave the one you have already in there (but its usually safer and better to just redownload/reflash it as annoying as it is). But yes, you would use CWM to flash it. It's as simple as "Install from SD Card" which is why custom recoveries like CWM are popular. So simple
At this point, I would look into a few things. One is skinning your phone (though you probably can't do too much if you don't want to touch system files). If you find a psuedo-rom (slightly modded) that themes it, that's your best bet. Another is gaining access to certain features in apps you didn't have before (i.e. androidLost, LBE Privacy Guard, titanium backup) and of course more control by the ability to control your system files (if you know what you're doing, of course). Lastly, you can use stuff like MetaMorph to theme out certain sections of your rom (provided that they give you one compatible with your phone model/rom), minus having to flash it and having more fine-tuned controlled. Usually, Metamorph will run on all ROMs, but it doesn't guarantee that there'll be stuff for every ROM. Also, want themes? google it (google is your best friend!)
Kies won't tell you that you have an upgrade because it is ROM-dependent. It looks for their official ROM and says "Hey, this guy has our ROM. Check for an update". Think of owning a custom rom like being kicked out of your family. You won't get anymore updates from them XD. However, if you're looking to get the latest updates, check out the Samsung Galaxy S Dev threads. They will usually have another method of loading in the new ROM into your phone. And if you want to stick with ROM Manager, shell out for premium and they'll include "Check for Updates" in ROM Manager, along with several other functions (though you can check for free via computer/browser ). Mostly, manually updating the software requires the "Install from SD Card" feature in CWM/other recoveries, so you don't have much to worry about.
Odin is, as you stated, most likely your best bet. Not too many people repackage official ROMs into easy-to-flash zips. Odin is the Samsung equivalent to Motorola's RSD Lite from what I googled (i have motorola, so no exp. on odin >.<) It's mostly like a dev tool allowing you to flash/re-flash phones and is also usually your one-way ticket out of a semi/full brick (assuming you didn't mess up the hardware and you can get into download mode). It's the flashing tool that can access the core system of the phone even without root and allows you to reflash OFFICIAL ROMs. Should you use Odin (should be your last resort), you WILL lose root and all your data. No questions asked. Its like reinstalling everything to the state in which you got it in when you bought the phone. Word of advice: BACK UP OFTEN! (did i forget to mention Titanium Backup? )
Yeah, the transition from Apple to Android is so different and had I not had experience with my PSP, i'd be dying with the information overload. However, just read a lot of stuff on the forums (*cough*general android forums*cough*) and you should be just fine. We have an excellent community here that will try our best to fix whatever problems you encounter (note the key word: try. we're not gods XD) You'll get the hang of it soon enough.
Oh, well, I don't want to keep you for much longer, but since you mentioned something that any noob should know, it's definitely ADB (Android Debugging Bridge). This is where you'll probably spend a lot of time, as people's fixes usually involve shell (terminal for your phone). If anything, get acquainted with it, as it might save your butt in the future/unlock a few extra features for you ;D .
Well, that's all i can think of, and honestly, after typing this thing up for about an hour now, I think I'm going to grab me some breakfast Good luck to you and welcome to the Android commmunity! (and next time, remember to post in the right place! XD)
~jojojohnson7410
P.S. PM me if you need anything. =]
Click to expand...
Click to collapse
Wow, thanks a lot. I still have a question or two, bear with me.
Well for one, is flashing roms made for different firmwares alright, or no? Since I have 2.2, and im assuming the latest cyanogen is made for 3.x, would I have to upgrade my firmware to the corresponding firmware.
And about Clockwork, if my phone bricks, I'd have to restore using odin, right? But if the phone still works, i can just root and cwm and restore it using rom manager?
And uh, I'm not sure if this is a problem or im just doing something wrong, but in RomManager, i click Backup Current ROM, and it goes into recovery mode, and theres no new options, there's just like, format, factory reset, clear cache, reboot, but nothing involving rom manager. And when i check for the recovery file in my sd card, it's not. Wut do.
WoZZeR999 said:
Just to nit-pick a bit. CWM is part of the recovery partition, and unless the Galaxy S is different from every other android device, flashing will not remove it. ROM Manager and CWM are two different things. ROM manager will allow you to download the roms, which will then instruct CWM to flash the rom (when it reboots).
Click to expand...
Click to collapse
lol true true that would be my mistake. XD Nice catch
~jojojohnson7410
Gutana said:
Wow, thanks a lot. I still have a question or two, bear with me.
Well for one, is flashing roms made for different firmwares alright, or no? Since I have 2.2, and im assuming the latest cyanogen is made for 3.x, would I have to upgrade my firmware to the corresponding firmware.
Click to expand...
Click to collapse
No, you wouldn't have to upgrade to the latest firmware to get the ROM installed. So long as the ROM is confirmed to work for your device, you can flash any ROM you want (which is convenient in my case since I have an Atrix 4G and it was oh-so-lonely without some Gingerbread XD)
Gutana said:
And about Clockwork, if my phone bricks, I'd have to restore using odin, right? But if the phone still works, i can just root and cwm and restore it using rom manager?
Click to expand...
Click to collapse
Well, the thing is, you really only need that usually if you're on a stock rom or some official version and either you want to flash a new stock ROM from Samsung or you want to pull your phone out of a brick. Most of the time, however, even if you bricked it, so long as you can get into the recovery menu, you'll be alright. Just re-flash the ROM that you want (or in my case yesterday when I was dealing with an Inspire, I had to use a different ROM to unbrick the phone. I don't know why this happen, but it was being nit-picky >.<)
Gutana said:
And uh, I'm not sure if this is a problem or im just doing something wrong, but in RomManager, i click Backup Current ROM, and it goes into recovery mode, and theres no new options, there's just like, format, factory reset, clear cache, reboot, but nothing involving rom manager. And when i check for the recovery file in my sd card, it's not. Wut do.
Click to expand...
Click to collapse
lol nooo this is not a problem at all. See, like the guy above me posted, the Recovery Menu is completely separate from anything in the ROM. It's located in the recovery partition rather than the system and the boot partitions, so they usually don't touch the recovery. ROM Manager is just a means of providing GUI to CWM so then you can either flash the CWM to your phone or help download ROMS into your SD card. Stuff like backup and everything needs you to boot into recovery as you can't be backing up the system while your system is mounted on, so they send you to CWM. From there, there's an option called "backup and restore". In this place, you can choose where to save the backup. And since the backup is made by CWM, it will be recognized by CWM if you want to restore it. I think it saves it in a zip file, but im not 100% positive, so take that one with a grain of salt.
Hope this answers the questions! Let me know if you need more help (or just PM me. I check that regularly )
~jojojohnson7410
jojojohnson7410 said:
No, you wouldn't have to upgrade to the latest firmware to get the ROM installed. So long as the ROM is confirmed to work for your device, you can flash any ROM you want (which is convenient in my case since I have an Atrix 4G and it was oh-so-lonely without some Gingerbread XD)
Well, the thing is, you really only need that usually if you're on a stock rom or some official version and either you want to flash a new stock ROM from Samsung or you want to pull your phone out of a brick. Most of the time, however, even if you bricked it, so long as you can get into the recovery menu, you'll be alright. Just re-flash the ROM that you want (or in my case yesterday when I was dealing with an Inspire, I had to use a different ROM to unbrick the phone. I don't know why this happen, but it was being nit-picky >.<)
lol nooo this is not a problem at all. See, like the guy above me posted, the Recovery Menu is completely separate from anything in the ROM. It's located in the recovery partition rather than the system and the boot partitions, so they usually don't touch the recovery. ROM Manager is just a means of providing GUI to CWM so then you can either flash the CWM to your phone or help download ROMS into your SD card. Stuff like backup and everything needs you to boot into recovery as you can't be backing up the system while your system is mounted on, so they send you to CWM. From there, there's an option called "backup and restore". In this place, you can choose where to save the backup. And since the backup is made by CWM, it will be recognized by CWM if you want to restore it. I think it saves it in a zip file, but im not 100% positive, so take that one with a grain of salt.
Hope this answers the questions! Let me know if you need more help (or just PM me. I check that regularly )
~jojojohnson7410
Click to expand...
Click to collapse
But theres no backup and restore options, its jut the recovery options you'd get if you were on a brand new phone.

WIND Optimus 2x owners upgarde? how to guide?

Hey guys i have a few questions!
Firstly im new to G2x flashing, and android flashing in general. I used to own a Samsung Captivate (which was so simple to flash! one click stock odin > root > rom manager> flash clockworkmod > reboot > install rom) i've been reading around and i honestly dont understand the guides on how to flash. Also has anyone with WIND Optimus 2x sucessfully flashed CM 7.1? If so do you notice better reception? better battery life? better performance? IS it worth it to flash?
Can someone please make a step by step guide on how to flash WIND Optimus 2x, for noobs (like me) i see there are many and it's just confusing! i dont want to brick my phone, its been a week since ive had it, and the only problem i noticed is at night school i dont get reception (even though on wind's website its covered there), and the battery life is poor. Anyways please help me im eager to install cyanogenmod, but am afraid at the same time of bricking my device. THanks for reading my thread!
I don't understand what is so confusing. The guides on this forum are easy to follow.
First install Clockworkmod Recovery using One Click NVFlasher
Link to thread: http://forum.xda-developers.com/showthread.php?t=1056847
And then boot into recovery by holding down power + volume down. Backup your current rom and then install the rom of your choice. You need a physical sd card in the phone to backup the rom.
I don't think it could be any easier.
http://wiki.cyanogenmod.com/wiki/LG_G2x:_Full_Update_Guide
That takes care of rooting+flashing. Don't worry, you can't easily brick this thing.
why cant we use internal SD card? i dont mind i have an 8GB external i just think it would be easier if we had internal SD, like i said this is confusing such as somewhere i read that i have to take out the battery and wait until s/w? or something to flash clockwork mod ugh
sowe dont have to use NVFLASH? im scared of bricking the device if i dont use it lol .. has anyone on wind gotten bricked/
ed116 said:
why cant we use internal SD card? i dont mind i have an 8GB external i just think it would be easier if we had internal SD, like i said this is confusing such as somewhere i read that i have to take out the battery and wait until s/w? or something to flash clockwork mod ugh
sowe dont have to use NVFLASH? im scared of bricking the device if i dont use it lol .. has anyone on wind gotten bricked/
Click to expand...
Click to collapse
Think about it. You're backing something up onto itself. You'll be making backups of backups. If you insist, just search for it, there's a way to change the mount moints. We do have to nvflash, I forgot to mention that, my bad. NVFLASH is very easy, you can't brick with it.
it is indeed very difficult to brick this phone. the only time it happens is when u are doing a recovery in clockwork, and pull the battery out in the middle.
but then you pull the battery, enter into the actual recovery using your computer.

[Q] New to Moto phones, can you cans help me understand some stuff?

So, the Atrix 2 is my first motorola android phone. On my Captivate and Aria, everything in terms of hacking was very clear and easy to understand. you root, flash CWM and off you go. On my Atrix 2, I don't understand any of this crap. Can you guys help clear it up?
1.) I flashed the Bionic CWM like many others and can't boot into it (like not even through ROM Manager)
2.)I read some stuff about bootstrap. What is this? I know you have to have it to boot into CWM, but I have no idea how to get it or what it is.
3.)What does a locked boot loader have to do with a custom recovery and how does that affect anything?
4.) What is this fastboot thing? I downloaded the 470 some odd meg zip because I heard it could help recover a soft brick, but how do I use that or flash it or where do I put it? I'm so bewildered with all these new things.
If you could please answer and help clear things up that would be greatly appreciated and if there is anything else important, please help me understand before I try anything and screw up.
I'm only 14 so it's hard to understand a lot of this stuff hahaah
Take a look here http://forum.xda-developers.com/showthread.php?t=1396650, this should answer most of your questions and if ya have any after that then just let us know. Hope you are enjoying the new phone
okachowwa said:
So, the Atrix 2 is my first motorola android phone. On my Captivate and Aria, everything in terms of hacking was very clear and easy to understand. you root, flash CWM and off you go. On my Atrix 2, I don't understand any of this crap. Can you guys help clear it up?
1.) I flashed the Bionic CWM like many others and can't boot into it (like not even through ROM Manager)
2.)I read some stuff about bootstrap. What is this? I know you have to have it to boot into CWM, but I have no idea how to get it or what it is.
3.)What does a locked boot loader have to do with a custom recovery and how does that affect anything?
4.) What is this fastboot thing? I downloaded the 470 some odd meg zip because I heard it could help recover a soft brick, but how do I use that or flash it or where do I put it? I'm so bewildered with all these new things.
If you could please answer and help clear things up that would be greatly appreciated and if there is anything else important, please help me understand before I try anything and screw up.
I'm only 14 so it's hard to understand a lot of this stuff hahaah
Click to expand...
Click to collapse
1. We don't yet have that ability, but with the sfb/fxz out now i'm sure it's just a matter of time.
2. Not really sure how to explain that
3. Because alot of the framework is locked due to the bootloader, the devs haven't been able to come up with a fully functional recovery, limiting some functionality of the recovery's that are out there.
4. Not sure as I haven't looked in to it yet

Mistake in BootMenu No /emmc/

In time backup bootmenu there was here a such:
"No /emmc/. android_secure found. Skip ping backup of applications on external storage."
That it?
How to correct?
Forgive for my English=)
I from Ukraine.
all the user applications get stored on the phone memory in /data.. so that does get backed up in both Full and Fast backup
you dont really need to backup your sdcard
Edit: yeah the applications from sdcard dont get backedup.. just did a backup :S
anikadam said:
all the user applications get stored on the phone memory in /data.. so that does get backed up in both Full and Fast backup
you dont really need to backup your sdcard
Click to expand...
Click to collapse
Means and has to be? You too have such message?
yeah i got that message, /emmc/ could not/skipped backup or something like that.. :?
We have no /emmc on this phone, so ignore that. The bionic and the razr and a few other phones have /emmc, but the A2 does not, so you can ignore this "error".
jimbridgman said:
We have no /emmc on this phone, so ignore that. The bionic and the razr and a few other phones have /emmc, but the A2 does not, so you can ignore this "error".
Click to expand...
Click to collapse
Thanks a lot!
You calmed me.
I have one more question to you.
Instead of BootMenu I delivered to atrix 2 bootstrap recovery
Also there was a new message
Log:
ClockworkMod Recovery v5.0.2.5
SD Card spase free: 7618mbMB
Backing up system...
Backing up data...
Backing up .andoid_secure...
Backing up cache...
No sd_ext found. Skipping backup of sd-ext.
Generating md5 sum...
Backup complete!
What you can tell? it norm?
At me costs 123 build.
+modification russian language
Chester103 said:
Thanks a lot!
You calmed me.
I have one more question to you.
Instead of BootMenu I delivered to atrix 2 bootstrap recovery
Also there was a new message
Log:
ClockworkMod Recovery v5.0.2.5
SD Card spase free: 7618mbMB
Backing up system...
Backing up data...
Backing up .andoid_secure...
Backing up cache...
No sd_ext found. Skipping backup of sd-ext.
Generating md5 sum...
Backup complete!
What you can tell? it norm?
At me costs 123 build.
+modification russian language
Click to expand...
Click to collapse
Yep perfectly normal, and a successful backup. Again since we do not have an internal /sdcard (like the samsung phones do), there is no /sd_ext, so it will skip that. You can use bootmenu or bootstrap to get a successful backup, your previous errors, were not really errors, and you most likely got a good backup.
I will be 100% honest here, and that the backups from CWM are really worthless. We have the fxz, and since we can not really get into CWM on boot easily (like they can on say samsung phones, which they can flash a custom CWM to thier recovery partition), the fxz is really your ONLY savior here. You might be able to restore a backup of stock ICS, ONLY if you do not bork your current rom, and can still get into CWM on boot somehow. If backing up with CWM gives you a warm and fuzzy, then it does it's job, but since we have an ICS fxz now, it is really not needed. And even more so, if you want to move over to things like CM10 or MM, and then want to go back to stock. Yes you can technically restore your backup, but I and others have seen some odd things that get left over from doing that, so the fxz is really the best thing to do.
jimbridgman said:
Yep perfectly normal, and a successful backup. Again since we do not have an internal /sdcard (like the samsung phones do), there is no /sd_ext, so it will skip that. You can use bootmenu or bootstrap to get a successful backup, your previous errors, were not really errors, and you most likely got a good backup.
I will be 100% honest here, and that the backups from CWM are really worthless. We have the fxz, and since we can not really get into CWM on boot easily (like they can on say samsung phones, which they can flash a custom CWM to thier recovery partition), the fxz is really your ONLY savior here. You might be able to restore a backup of stock ICS, ONLY if you do not bork your current rom, and can still get into CWM on boot somehow. If backing up with CWM gives you a warm and fuzzy, then it does it's job, but since we have an ICS fxz now, it is really not needed. And even more so, if you want to move over to things like CM10 or MM, and then want to go back to stock. Yes you can technically restore your backup, but I and others have seen some odd things that get left over from doing that, so the fxz is really the best thing to do.
Click to expand...
Click to collapse
Thanks a lot! Everything is very simple and clearly written.
But I didn't understand that such FXZ?
Chester103 said:
Thanks a lot! Everything is very simple and clearly written.
But I didn't understand that such FXZ?
Click to expand...
Click to collapse
An FXZ is the factory install provided by Motorola. Now Motorola does not provide this to normal users, they give it to AT&T and Motorola repair sites, and it gets leaked to us, from the incredible Motorola Firmware team.
The FXZ needs to be flashed with a program called RSD lite (only works on windows machines), it will fully restore your phone back to the factory install of ICS.
Take a read at this thread it explains a lot of great things for the A2:
http://forum.xda-developers.com/showthread.php?t=1396650
Now that has not been updated in a while, but it will give you enough information.
You can get the proper FXZ file for your phone or region from here:
http://sbf.droid-developers.org/edison/list.php
You can also get the files from here, for the international phones:
http://forum.xda-developers.com/showthread.php?t=1934874
Or here for the AT&T phones:
http://forum.xda-developers.com/showthread.php?t=1961310
RSD lite version 6.0 is needed to flash ICS, and you can get that from here:
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
You will also need to get the motorola atrix2 drivers for windows from the motorola website, I will not link those as I am sure you can find them from going to the motrola home page and look under mobile device drivers.
By using the FXZ, it will be like your phone came brand new out of the box.
jimbridgman said:
An FXZ is the factory install provided by Motorola. Now Motorola does not provide this to normal users, they give it to AT&T and Motorola repair sites, and it gets leaked to us, from the incredible Motorola Firmware team.
The FXZ needs to be flashed with a program called RSD lite (only works on windows machines), it will fully restore your phone back to the factory install of ICS.
Take a read at this thread it explains a lot of great things for the A2:
http://forum.xda-developers.com/showthread.php?t=1396650
Now that has not been updated in a while, but it will give you enough information.
You can get the proper FXZ file for your phone or region from here:
http://sbf.droid-developers.org/edison/list.php
You can also get the files from here, for the international phones:
http://forum.xda-developers.com/showthread.php?t=1934874
Or here for the AT&T phones:
http://forum.xda-developers.com/showthread.php?t=1961310
RSD lite version 6.0 is needed to flash ICS, and you can get that from here:
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
You will also need to get the motorola atrix2 drivers for windows from the motorola website, I will not link those as I am sure you can find them from going to the motrola home page and look under mobile device drivers.
By using the FXZ, it will be like your phone came brand new out of the box.
Click to expand...
Click to collapse
I am very grateful. Thanks for the information.
Good luck to you.
Chester103 said:
I am very grateful. Thanks for the information.
Good luck to you.
Click to expand...
Click to collapse
That is a wealth of knowledge to ensure you get no sleep at night messing with your phone.
Please click the thanks button at the bottom right of the posts from Jim.
Not a requirement but a courtesy. He went beyond the call of duty.
Thank you, I learned new knowledge

Galaxy S5 Clone almost dead (OS damaged) and I can't flash. Help!

First of all, let me introduce myself. My name's Rafael and this is my 1st post in this forum. I hope humbly that you can to help me with the problem that I'll show you then:
Well. To begin, the issue is this... I am working with a telephone that's not mine. Somebody sent it to me to fix it, they said me that the phone doesn't download more apps because of "full memory". When I checked it, apparently it had the internal memory partitioned incorrectly, it said it was 16gb total storage with 7 GB available, but when I was installing some apps and went back to see the memory, it showed the Available Storage Memory with a large negative number, and it wasn't letting me install more apps. Some of the features of the phone are the following (according to MTK Droid Tools):
MTK6589 <---------(Actually it's MTK6571)
Model Name: Galaxy S5
Android Version: 4.4.4 <---------(Questionable)
Model Number: SM-G900H
Base Band: G900HXXU1ANCE
Then, to see if I could make some change, I decided to install a custom ROM, apparently for MTK6589 (at that time I didn't suspect about the horrible phone's falsehood). I wanted to see if this ROM brought the partition configured correctly. I tried to carry out the installation by the CWM Recovery from SD card. It turned out that the installation did not exceed 10% and it froze there. Then I removed the battery of the phone and inserted it again. When I try to turn it back on, it stays on the screen Mediatek. And from there, it does absolutely nothing more.
I've tried to flash back the backup that I made to the phone with MTK Droid Tools, both version 5 of SP Flash Tool as version 3, but I'm still not achieving positive results, always it throws me errors errors and more errors . I've searched all over the web, compatible ROMs for this phone, but apparently there is not anything. The only way in which (at least) it begins to flash from SPFT v5, is loading a ROM MTK6571; if not, it only throws errors. However, I've already tried, but it gave me error. It appears when the yellow bar that says Download Flash reaches 3%, and then it throws the error.
The only possible solution I see is to make a ROM (from the backup I made to the phone with MTK Droid Tools before to **** it up) installable from recovery (CWM) that is the only thing that works relatively well. And I have not reached that conclusion alone, but in bilateral agreement with an expert from another forum with who I have almost a month discussing the issue.
I really need help buddies. I am desperate because I'm a bit under pressure because I have almost a month with the phone without achieving the desired results. :crying:
Greetings and thanks in advance to any of you who want to help me.
PD: Sorry for my bad English if I committed mistakes.
Post removed
Killwish said:
Download stock firmware from http://samsung-updates.com or http://sammobile.com
And flash it via odin...
Good luck
Click to expand...
Click to collapse
Do NOT do this. None of them will work.
Your issue is that 99% of the time clones dont not have the software they claim and are never made by the company they claim they are. You could try porting a rom over that has the same chip but ill be honest. XDA doesnt really do anything with cheap knock off devices. Most people avoid them like the plague.
Sorry for my previous post..... I didn't read carefully. It's not s5 its clone....
Another way...
zelendel said:
Do NOT do this. None of them will work.
Your issue is that 99% of the time clones dont not have the software they claim and are never made by the company they claim they are. You could try porting a rom over that has the same chip but ill be honest. XDA doesnt really do anything with cheap knock off devices. Most people avoid them like the plague.
Click to expand...
Click to collapse
I was thinking about to take system.ubifs.tar and boot.img from the backup, to turn it into a bootable (installable) ROM from the recovery. Is it somehow possible?
06rafagar94d said:
I was thinking about to take system.ubifs.tar and boot.img from the backup, to turn it into a bootable (installable) ROM from the recovery. Is it somehow possible?
Click to expand...
Click to collapse
Best advise is that you can try. Like I said we dont deal with clones at all really.
Worst thing that will happen is that it wont work and you learned a lesson about clone devices.

Categories

Resources