Here's the deal: ProClip may not make mounts for the Skyrocket because of low demand. There's not enough of us out there they think. We NEED ALL SKYROCKET OWNERS to send a brief request for information on Skyrocket mounts to Proclip. It'll take you less than two minutes and will make it FAR easier for you to get accessories for the Skyrocket in the future. PLEASE!!!
USA customers, Email Proclip at [email protected]
Canada Customers, Email Proclip at [email protected]
You don't have to order anything, just express interest and ask about availability.
FYI: Proclip makes the BEST vehicle mounts for mobile devices. Here's their website: http://www.proclipusa.com/
Even if you're not going to get one of these mounts, PLEASE take 60 seconds to click on the email link and express an interest. Pass the word around and reply here when you've emailed.
Thanks in advance for everybody's help!
Email sent.
It's stupid just get a suction cup cell phone holder off dealextreme.. I've been using mine fine and the skyrocket fits nice and snug. Don't waste the companies time because there is a low demand and that ain't a lie
Sent from my SGH-T989 using xda premium
Girn said:
It's stupid just get a suction cup cell phone holder off dealextreme..
Click to expand...
Click to collapse
Yes you're right, it's stupid to use an ugly generic holder when we could have very slick custom holders.
I've used the Proclip holders with my HD2 and Inspire, there is no comparison between these and the crappy suction cup holders. Pro-clips look right at home in a BMW or a Chevy Truck. Very nice interface. If you like to "do things right" Proclip is for you.
I to have used proclip for my old iphone. They make good products. A tad expensive tho.
Email sent. I would be interested in getting another one for my SR.
My wife has the suction cup thingy for Galaxy2 from Tmobile and I dont like it, its too bulky and in the way of road vision.
Guess what they are 5 mins away from where i live. I already used their mount the best out there. So will go personally and make request.
Nakel said:
Here's the deal: ProClip may not make mounts for the Skyrocket because of low demand. There's not enough of us out there they think. We NEED ALL SKYROCKET OWNERS to send a brief request for information on Skyrocket mounts to Proclip. It'll take you less than two minutes and will make it FAR easier for you to get accessories for the Skyrocket in the future. PLEASE!!!
USA customers, Email Proclip at [email protected]
Canada Customers, Email Proclip at [email protected]
You don't have to order anything, just express interest and ask about availability.
FYI: Proclip makes the BEST vehicle mounts for mobile devices. Here's their website: http://www.proclipusa.com/
Even if you're not going to get one of these mounts, PLEASE take 60 seconds to click on the email link and express an interest. Pass the word around and reply here when you've emailed.
Thanks in advance for everybody's help!
Click to expand...
Click to collapse
Adjustable Holder with Tilt Swivel
I emailed them about a custom mount a couple of weeks ago, and got the same response. I then went ahead and ordered the following item, and it actually fits really well. After using ProClip for my devices for the past 4 years (Tilt, Tilt 2, Captivate), I couldn't go a day longer with my SR sitting in my cup holder.
The nice thing about the adjustable holder is that it should work for pretty much any phone I ever buy again in the future. There is minimal play from front to back, but that's only if I use my hand to move it. When sliding my phone into the holder, it's just as tight as the custom holders have always been. While driving, it stays put. Another plus, is that if I ever decide to buy a case, I'm confident that it will work with this same holder.
AT&T Samsung Galaxy S II - Adjustable Holder with Tilt Swivel
Item #: 875214
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Oh, and to clarify. I HATE HATE HATE adjustable holders, but this one is done right. It's the same solid plastic build of all previous holders, but the sides are tightened down with thumb screws. I just placed my phone in the holder, squeezed the sides of the holder relatively tight and tightened the screws, and it's been perfect for the past week.
I sent an email letting them know that there are Rogers, T Mobile and Docomo versions of the same phone. Hope it helps.
i wonder if these will fit http://www.proclipusa.com/?sectionp...73&have_holder=&have_mount=&p_pageid=1&dtype=
mhx said:
i wonder if these will fit http://www.proclipusa.com/?sectionp...73&have_holder=&have_mount=&p_pageid=1&dtype=
Click to expand...
Click to collapse
I asked them about that. They've tried the SR in it and it works, but is wobbly. I went ahead and ordered one so I have something to use in the meantime. Maybe with a very thin cover on the phone it'll work well? I'll post up when I get it.
One thing about the universal holders, they don't have charging built in. It's nice to slide your phone in the holder and have it charging.
It's ironic, I got the SR over the Vivid partially because of charging mount compatibility. As it turns out, Proclip is going to make a Vivid mount, but not a SkyRocket mount. Is the Vivid really going to outsell the Skyrocket by that much?
got a fairly standard reply back from my request... though it does say they plan on making it.. and yes i see the error in the first sentence too.. but that's how it was sent to me lol
"Thank you for your interest in our ProClip Holder. At this time we do not have a Holder for you're the Samsung Galaxy S II SkyRocket.
We do anticipate making one, however due to the large number of new products we are developing, we cannot give a specific date as to when this will be available. You will be notified by e-mail as soon as the Holder has been received at our warehouse and is ready for online ordering."
Nakel said:
Here's the deal: ProClip may not make mounts for the Skyrocket because of low demand. There's not enough of us out there they think. We NEED ALL SKYROCKET OWNERS to send a brief request for information on Skyrocket mounts to Proclip. It'll take you less than two minutes and will make it FAR easier for you to get accessories for the Skyrocket in the future. PLEASE!!!
USA customers, Email Proclip at [email protected]
Canada Customers, Email Proclip at [email protected]
You don't have to order anything, just express interest and ask about availability.
FYI: Proclip makes the BEST vehicle mounts for mobile devices. Here's their website: http://www.proclipusa.com/
Even if you're not going to get one of these mounts, PLEASE take 60 seconds to click on the email link and express an interest. Pass the word around and reply here when you've emailed.
Thanks in advance for everybody's help!
Click to expand...
Click to collapse
I also find it strange that I see better accessories support the Vivid than the skyrocket. On launch day the rep I bought my phone from told me that they had not sold a single Vivid but they had been selling skyrockets all morning. That questionnaire they sent out had specific questions wanting to know why we chose the SR over the Vivid. I assumed they wanted to know why the Vivid wasn't selling well.
Email sent!
Decer said:
got a fairly standard reply back from my request... though it does say they plan on making it.. and yes i see the error in the first sentence too.. but that's how it was sent to me lol
"Thank you for your interest in our ProClip Holder. At this time we do not have a Holder for you're the Samsung Galaxy S II SkyRocket.
We do anticipate making one, however due to the large number of new products we are developing, we cannot give a specific date as to when this will be available. You will be notified by e-mail as soon as the Holder has been received at our warehouse and is ready for online ordering."
Click to expand...
Click to collapse
yeah, I got the same automated response. When i called to follow up is when they told me they had no plans to produce a mount for the Skyrocket. Hopefuly, we can show there are plenty of Skyrocket owners, at least as many or more than the Vivid..
done
Email-sent
Thanks everybody for your emails! Looks like they had the desired effect:
Hi Dave,
Yes we are making one. We have purchased the device and it is shipped off to the Factory. We anticipate with the holidays to have the holders available in January.
Best Regards,
Johan van Mierlo
Product Manager Executive, ProClip USA, Inc.
Click to expand...
Click to collapse
Nakel said:
Here's the deal: ProClip may not make mounts for the Skyrocket because of low demand. There's not enough of us out there they think. We NEED ALL SKYROCKET OWNERS to send a brief request for information on Skyrocket mounts to Proclip. It'll take you less than two minutes and will make it FAR easier for you to get accessories for the Skyrocket in the future. PLEASE!!!
USA customers, Email Proclip at [email protected]
Canada Customers, Email Proclip at [email protected]
You don't have to order anything, just express interest and ask about availability.
FYI: Proclip makes the BEST vehicle mounts for mobile devices. Here's their website: http://www.proclipusa.com/
Even if you're not going to get one of these mounts, PLEASE take 60 seconds to click on the email link and express an interest. Pass the word around and reply here when you've emailed.
Thanks in advance for everybody's help!
Click to expand...
Click to collapse
A Proclip USA SkyRocket holder is in the make. It almost worked in the Infuse and Galaxy II holders (T-Mobile/Sprint). They have to make some adjustments to have it custom for the SkyRocket.
Email Proclip to get yourself added to the list. They will email you when they have them. But they have many holders to make, just be patience. The will come through.
Just got this email looks like the emails we sent worked
Also noticed they are a local company here in the Chicago area, not far from where I live LOL
Dear Customer,
The ProClip Device Holders for the Samsung Galaxy S II SkyRocket and Galaxy S II LTE are now in production and available for online pre-ordering at www.proclipusa.com:
Item # 511327 - Holder with Tilt Swivel (PRE-ORDER NOW !!)
Item # 512327 - Holder with Tilt Swivel and Cigarette Lighter Charger (PRE-ORDER NOW !!)
Item # 513327 - Holder with Tilt Swivel and Straight Cable for Fixed Install (PRE-ORDER NOW !!)
Item # 875214 – Adjustable Holder with Tilt swivel for use with a skin or case
Follow this link to see all the holders in one list view.
Thank you for your interest in our products and have a terrific day!
Best Regards,
Customer Service
ProClip USA, Inc.
Got the same response this morning that they are in production and available for pre order.
Does anyone one if this will rotate to a horizontal position or is this just meant to stay vertical?
Related
Hi,
Has anyone purchased a car mount for their desire?
My Desire should hopefully arrive tomorrow and I'm trying to get some accessories for it! The car kit is fairly essential, I have the bluetooth radio that supports A2DP so I'm very excited!
Could anyone recommend a decent car mount?
I have a suction one for my N95 but I think I'd rather one that clips into one of the vents.
I`m waiting for Brodit to release one for the desire, supposed to be soon.
I used their active kit for my G2/Hero and its good. Easy to fit into your car, took 5mins, you have to buy depending on your make/model and where you want it mounted.
Look at the 'Desire Accessories':
http://www.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
I read somewhere that the nexus one brodit is supposed to work with the desire - who's brave enough to try it now!?
paulruk said:
I`m waiting for Brodit to release one for the desire, supposed to be soon.
I used their active kit for my G2/Hero and its good. Easy to fit into your car, took 5mins, you have to buy depending on your make/model and where you want it mounted.
Click to expand...
Click to collapse
Brodit have told me its imminent and to check the website for release (dsldevelopments dot com) within 14 days.
I've used them for years, just replacing the holder on the mount for each new phone.
MOD EDIT - Moved to Accessories forum
Hi,
I was really suprised when tried my old brodit holder for iphone 3G - its almost ideally fitted for Desire too No need to buy new one, hurrey!
jimmythekey said:
Hi,
Has anyone purchased a car mount for their desire?
My Desire should hopefully arrive tomorrow and I'm trying to get some accessories for it! The car kit is fairly essential, I have the bluetooth radio that supports A2DP so I'm very excited!
Could anyone recommend a decent car mount?
I have a suction one for my N95 but I think I'd rather one that clips into one of the vents.
Click to expand...
Click to collapse
radskman said:
Hi,
I was really suprised when tried my old brodit holder for iphone 3G - its almost ideally fitted for Desire too No need to buy new one, hurrey!
Click to expand...
Click to collapse
Isnt the connection different for the iphone or is it a passive holder?
jannen said:
Look at the 'Desire Accessories':
http://www.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
Click to expand...
Click to collapse
Yes I'm going for this too , looks like the mutts nuts
ferryrich said:
Brodit have told me its imminent and to check the website for release (dsldevelopments dot com) within 14 days.
I've used them for years, just replacing the holder on the mount for each new phone.
Click to expand...
Click to collapse
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
johnbanks said:
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
Click to expand...
Click to collapse
Ask brodit theyre fast at resonding. I`d say it might not work as the connections might not align up. I`d try and wait a few weeks for the desire one
to appear.
Silly question, but wont the Brodit Mobile Phone Active Holder Tilt Swivel for Nexus One be ok for the Desire? It's on the dlsdevelopments website.
Click to expand...
Click to collapse
Ask brodit theyre fast at resonding. I`d say it might not work as the connections might not align up. I`d try and wait a few weeks for the desire one
to appear.
Click to expand...
Click to collapse
I emailed them and they said it wouldnt fit due to the clearance being 0.1mm
We're out of stock of Nexus One - but we get some I will test it.
Desire Brodit are on the site coming soon - but there is no date.
jannen said:
Look at the 'Desire Accessories':
.mobilefun.co.uk/trailblazer-universal-car-charger-and-holder-p22954.htm
Had it for several days... its cheap £9.99 and holds the phone and charges it as well! Delivery is megaquick too.
Click to expand...
Click to collapse
Really liked the look of this but I have an Audi A3 and the car cigarette lighter is housed within the ashtray about 3 inches from the outer dashboard. I doubt the trailblazer will fit.
Also it looks like the holding parts would go right over the volume controls on the Desire like it does on the HD2.
MINI WEIGHTED CUSHION FRICTION MOUNT with UNIVERSAL HOLDER for MOBILES SMART PHONES MP3 (SKU 5043)
I have just ordered this one for my desire, wanted something that wasnt a sucker mount and I dont like the airvent mounts, I also wanted something that meant that I could turn the desire from horizontal to vertical very easily without having to dismantle the device or struggle in doing so, lastly I wanted something that meant I could easily fit into another car quickly if i needed it, found this and it seems to fit the bill nicely, I have read up on the reviews on this mount with a garmin attatchment and they have all come back hugely favourable, love the fact that if i wanted to add another phone to the mount in the future all i have to do is to buy another back plate instead of the entire mount. was sceptical at first haven never seen a friction dash mount before but after reading the reviews and watching the video on the link i have provided and it only being £18.32 inc delivery i thought why not, will post up when i have received it and let you know how it is
buybits.com/product.aspx?id=5043
I have ordered the Nexus Brodit mount and it in fact does not fit as the Desire is 0.5mm wider and thicker.
So i have now ordered the Desire one from morpethmobiles.co.uk and should be receiving early next week so will post some pics
keleko said:
I have ordered the Nexus Brodit mount and it in fact does not fit as the Desire is 0.5mm wider and thicker.
So i have now ordered the Desire one from morpethmobiles.co.uk and should be receiving early next week so will post some pics
Click to expand...
Click to collapse
As I have said here, I think they may be selling the Nexus mount as the Desire mount.
i suspect that aswell because i talked to brodit directly 3/4 days ago and they said it should take at least 2 weeks for the holder to be available.
<START RANT>
It annoys me some shops are selling Nexus accessories as Desire ones - like this dock and also Clove are marketing the Proporta Alu Leather case for both the Nexus and the Desire.
If Brodit and Proporta think it necessary to redesign their accessories to fit the Desire, shops shouldn't be selling the Nexus versions as if they were designed for the Desire. I am sure Brodit and Proporta would have been delighted if their existing accessories would fit as they would increase their market without all the new R&D costs.
I would be very annoyed if I bought something as designed specifically for the Desire, only to find in a few weeks that the manufacturer had brought out a version that really was designed just for the Desire.
<END RANT>
norm2002 said:
As I have said here, I think they may be selling the Nexus mount as the Desire mount.
Click to expand...
Click to collapse
Thats rubbish, if it is then i'll kick off big time
Any one seen any nice car holders, I like the look of the brodit ones but I dont think they have updated their range yet.
Been using Brodit for a while now, love the custom mounts they do for almost every car on the road. Still waiting on the i9000 holder, but imagine it will be similar to their i5700 one, just getting a little impatient now, they are normally quicker than this at putting out new holders.
I received this from Brodit support yesterday:
Hi!
Thank for the interest in our products.
We have this under construction so please check our web for updates.
As soon as the holders are ready we have this ready it will be on our web.
But due to summer vacation we can’t say any clear date.
Best Regards
Click to expand...
Click to collapse
So I guess it will still take some time ...
there's someone on ebay with 3 different models, ranging from $10.74 to $13 (vent mount, and two different windshield mounts - one of which appears to be very similiar to the OEM one samsung australia dealers are displaying, ie it will mount to driver's door window as well)
but the ebay seller's prices include shipping from Hong Kong - they're specific to the i9000, so i figured at the price, i'd grab one till Tmo USA had theirs up
his do not include any charger but as ive already got a Tmo car charger, i'm good to go for now
From Brodit:
Thank you for the mail.
We hope to release holders for this in the middle of August.
dakine said:
From Brodit:
Thank you for the mail.
We hope to release holders for this in the middle of August.
Click to expand...
Click to collapse
Yikes! Its just a piece of moulded plastic and a USB connector.
TravUK said:
Yikes! Its just a piece of moulded plastic and a USB connector.
Click to expand...
Click to collapse
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
TravUK said:
Yikes! Its just a piece of moulded plastic and a USB connector.
Click to expand...
Click to collapse
maybe they will be special!!
Brodit is a swedish company and normally nearly everybody in sweden is off during july. I guess that explains.
Sent from my GT-I9000 using XDA App
dakine said:
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
Click to expand...
Click to collapse
yeah found same item on ebay UK, though from HK, but like you say will do until brodit release theres.
I ordered this: http://cgi.ebay.co.uk/Dash-Genie-Phone-Holder-Car-Kit-Samsung-i9000-Galaxy-S-/200488583857?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item2eae0d02b1
with my new Galaxy S. Hope to get them both today and test them out.
wuoma said:
I ordered this: http://cgi.ebay.co.uk/Dash-Genie-Phone-Holder-Car-Kit-Samsung-i9000-Galaxy-S-/200488583857?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item2eae0d02b1
with my new Galaxy S. Hope to get them both today and test them out.
Click to expand...
Click to collapse
Let us know how this works out, I did see this but wasnt too sure how stable it would be, especially through the bends!!
dakine said:
I bought this to tie me over, it's really cheap and doesn't look half bad I think: cgi.ebay.com/UNIVERSAL-CAR-MOUNT-HOLDER-SAMSUNG-i9000-GALAXY-S-/120580246943?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item1c13248d9f
Got one of these as well: cgi.ebay.co.uk/Samsung-Bluetooth-Visor-Car-Kit-HF1000-Brand-New-/140408962166?cmd=ViewItem&pt=UK_Mobiles_Accessories_RL&hash=item20b106bc76
Click to expand...
Click to collapse
For now, I've 'modified' my Brodit HD1 holder to fit my Galaxy S. Which seems to work ok. Just wish the GPS was a bit more accurate at times.
kirandeep said:
Let us know how this works out, I did see this but wasnt too sure how stable it would be, especially through the bends!!
Click to expand...
Click to collapse
The Galaxy S is light enough to stay put by itself on the Dash Genie. Though I found that the charging cable can pull on it and eventually un-stick it. I have to ensure the cable stays put and in the right position. It's not the bends that matter, more the potholes. And if you have to touch it it's fiddly. Neat idea, but would not buy it again.
i ordered ths one from ebay - it's specific to the i9000 - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
figured i'd use it till Tmo came out with the Samsung OEM unit here in the states - but after seeing the price for the Samsung unit on techbuy in australia (iirc either $79 or $89 AUD) i might just stay with this one
same seller on ebay has another for a couple bucks more that looks real similiar to the samsung one techbuy has pictured on their web - it looks like it will turn a full 180 degrees in the horizontal plane so you could mount it on the driver's door window -
and he has a 3rd unit that is meant for vent mounting
Try Arkon.
Look at this video:
http://www.youtube.com/watch?v=YulhYNgR6EM
Here is their website:
http://www.arkon.com/Smartphone_Holder.php
The company is based in the US.
I'm interested to here feedback on the dash genie http://cgi.ebay.co.uk/Dash-Genie-Ph...UK_Mobiles_Accessories_RL&hash=item2eae0d02b1 does the phone securely stick to the holder (i.e the phone doesnt fall out when cornering hard)? - Does it work aswell in landscape as portrait? Is the red dot on the holder simply a magnet (does that affect signal or GPS?) ? - From the video on the auction it looks brilliant - I drive a 1 series similar to the one in the video too - so I know it will work on my dash
kirandeep said:
yeah found same item on ebay UK, though from HK, but like you say will do until brodit release theres.
Click to expand...
Click to collapse
I actually received it today. First impresson: cheap but well designed. It comes with a little stick on mount so you can also stick the thing to your dash instead of the windscreen. The clamp is spring loaded so it can fit the phone even if it's in a case. I like it.
larryccf said:
i ordered ths one from ebay - it's specific to the i9000 - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190409500795&ssPageName=STRK:MEWNX:IT
figured i'd use it till Tmo came out with the Samsung OEM unit here in the states - but after seeing the price for the Samsung unit on techbuy in australia (iirc either $79 or $89 AUD) i might just stay with this one
same seller on ebay has another for a couple bucks more that looks real similiar to the samsung one techbuy has pictured on their web - it looks like it will turn a full 180 degrees in the horizontal plane so you could mount it on the driver's door window -
and he has a 3rd unit that is meant for vent mounting
Click to expand...
Click to collapse
Did you receive the car mount yet, i am curious if it is ok?
I also ordered this one but haven't received it yet.
Regards
Peter
yeah - it'll do fine
definitely strong enough, grip wise on the unit - in fact a little too tight, so i dremel'd out the lower capture points to give it a little relief in the vertical axis (vertical when the holder is in "landscape" position
the mechanical action on the locking cam (that locks the suction cup) feels good, real solid
and the mechanical action on the capture nut that tightens on the ball socket is actually impressive - pretty infinitely adjustable, easy to find that sweet spot where the ball socket is stiff enough to hold the phone at the angle / position you want, while not letting the holder move or shift, plus with the wgt of the vibrant so light, it's not inclined to
Both now available for preorder on Mobilefun:
Car:
http://www.mobilefun.co.uk/samsung-galaxy-s-i9000-vehicle-dock-p25778.htm
Home:
http://www.mobilefun.co.uk/samsung-desktop-dock-for-samsung-galaxy-s-i9000-p25779.htm
Also Battery backs and official replacement battery
http://www.mobilefun.co.uk/cat/Galaxy-S-I9000-Batteries.htm
Voucher for free delivery until sept 3rd
Sorry249
Full list of Accessories:
http://www.mobilefun.co.uk/cat/Samsung-Galaxy-S-I9000.htm
I want the car dock but wonder if it will fit with a protector skin/film on?
HTH
(Whoop edited with live links finally )
Most likely it won't fit with a case. May be for a film. It looks like quite a tight fit.
great now if they just could tell us when it will actually hit the market
http://www.slashgear.com/galaxy-s-o...aled-desk-car-docks-dlna-hd-streamer-1197250/
The dock I have been waiting for so patiently has no speakers!!!!!!! This is lame...
To compete with iphone we need a good dock with speakers! A dock is all I wanted for my first fathers day, and now I don't think I want it...
Disappointing this!
The lack of speakers isn't a big deal to me. I mean, the built in speaker is solid enough, and it looks to me like the dock would only cove half of the SGS, so you could plug in headphones or your own speakers.
My guess about the lack of speakers is that the horrible evil iPhone plug has contacts for headphones/speakers there. You could build one for the SGS, but you'd have to have a truly separate 3.5mm jack, and in horizontal orientation you'd have to be very careful sliding it in and out to avoid breaking it.
Also, this dock is very small, and so having anything on board would seem unlikely. I expect there will be some 3rd party docks coming soon enough to cover what you want.
Did you notice all the Galaxy Tab accessories there as well? Far more than for the S
Tehpriest said:
Did you notice all the Galaxy Tab accessories there as well? Far more than for the S
Click to expand...
Click to collapse
I am feeling a little betrayed by Samsung. Why can't they just get their act together and release the promised accessories? It's been 3 months already.
The Extended Battery Case looks ugly, but sadly is of great interest to me...
Actually, Handtec is now also showing some accessories available as Pre-order. It includes the Desktop Dock, Car Dock, a Leather Pouch, Replacement Battery and even an Official Capacitive Stylus for the Galaxy S.
Here is a link to these accessories: http://www.handtec.co.uk/search.php?xSearch=galaxy+s&submit=search+for+products
It's a shame, that they don't get the accesoires in stock.
I'm from Germany and they announced the Home Dock 4 Weeks ago and still nothing.
It is getting ridiculous now, I doubt if the desk cradle will ever hit the market.
Anyone any updates about this?
they are available for i500 fascinate for 40 t o 50 dollars on samsung us website dont know about i9000
doccrow said:
they are available for i500 fascinate for 40 t o 50 dollars on samsung us website dont know about i9000
Click to expand...
Click to collapse
Sorry I thought everyone knew. The official desk and vehicle docks have been discontinued. My money has been returned due to this from Mobilefun. When I asked Samsung customer services about it they said Samsung don't make them but third party's do. I pointed them to the press release and they said they would contact head office in Korea. Not heard from them since.
Tehpriest said:
Sorry I thought everyone knew. The official desk and vehicle docks have been discontinued. My money has been returned due to this from Mobilefun. When I asked Samsung customer services about it they said Samsung don't make them but third party's do. I pointed them to the press release and they said they would contact head office in Korea. Not heard from them since.
Click to expand...
Click to collapse
u can check their web site samsung us and can clearly see them for sale
Yes, but they don't ship to Germany
Tehpriest said:
Sorry I thought everyone knew. The official desk and vehicle docks have been discontinued. My money has been returned due to this from Mobilefun. When I asked Samsung customer services about it they said Samsung don't make them but third party's do. I pointed them to the press release and they said they would contact head office in Korea. Not heard from them since.
Click to expand...
Click to collapse
One of my drinking buddies has just started working for Samsung over here in Ireland, I'll give him a week or two to get his feet under the table and give instructions on what bit of SAP to delve into to look up stock
Polarfuchs said:
Yes, but they don't ship to Germany
Click to expand...
Click to collapse
They may have them listed but they are not any available to buy. They are not making or shipping them even in Korea.
doccrow said:
u can check their web site samsung us and can clearly see them for sale
Click to expand...
Click to collapse
And there are loads on e-bay com and other US suppliers - but they are all for the Vibrant - question - is it the same shape?
Can you post a link to some of these (edit: eBay ones) as I cannot find one. (vehicle mount that is)
Desktop dock: http://www.samsung.com/us/mobile/cell-phones-accessories/ECR-D979BEGSTA
Can't find the car mount
I have just received an email from Mobilefun telling me I will not be getting the car mount I pre-ordered as it is now discontinued. I am not sure whether we should be worried or not that the official Samsung official mount for our few month old phones is now not going to be available. I have never seen a product discontinued before it was even sold.
Most peculiar. I've been checking around here too, no accessory to be found. Really need a car mount.
WTF!?!?!? That is kind of scary. I havent even had the chance to think about getting the "official" accessories as of yet and to hear something like this now???
Perhaps someone can confirm with Samsung and find out what the deal is on this?
I had the same with the carmount available on meritline... weird eh!
I've ordered the exact same of eBay though... kinda weird!
I won't argue with the mods but surely this is a news story not just an accessories one?
This is the one I ordered. Where on eBay did you find one?
http://mobile.engadget.com/2010/08/...ine-of-galaxy-s-accessories-uses-fascinate-t/
got this one:
http://cgi.ebay.com/ws/eBayISAPI.dl...BqcxH64%3D&viewitem=&sspagename=STRK:MEWNX:IT
t1mman said:
got this one:
http://cgi.ebay.com/ws/eBayISAPI.dl...BqcxH64%3D&viewitem=&sspagename=STRK:MEWNX:IT
Click to expand...
Click to collapse
I've got the brodit: http://www.mountonus.com/Samsung-Ga...t-With-Tilt-Swivel-Function-512167-26030.aspx
It's a real nice car kit.
The Brodit ones not bad but neither of them really appeals to me. I wanted one I could just clip the SGS into and it would be screen mounted and powered. No messing with wires or anything. I have tried to email Samsung about it but I am not holding onto any hope of a reply.
I bought one of the spider foot screen mount and it came with a car charger, leather pouch and a laynard. I was that impressed with it that I bought a second for my friend!
this is the one i have
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220669758413&ssPageName=STRK:MEWNX:IT
althought, i have a herbet richter tower back part so all i needed was the bit that actually holds the phone, and it s a perfect fit.
sean2476 said:
I bought one of the spider foot screen mount and it came with a car charger, leather pouch and a laynard. I was that impressed with it that I bought a second for my friend!
Click to expand...
Click to collapse
I got the same one, do you ever have trouble getting the phone out of the holder? My clip seems to be very stubborn and always catches on the backplate of the phone, just wondering if you had the same problem
Thought I would share with you what the higher ups in Samsung have to say about this.
My (continuing) Question
To: Executive Office
Subject: Re: Car dock
- Hide quoted text -
Thank you again for your reply.
I think you are misunderstanding and that we are not making progress so I will try to explain again. Last year Samsung announced the Car and Media dock for the Samsung Galaxy S. Retailers began to advertise them for sale and to order them from yourselves. Two months later the retailers were told by Samsung that they were discontinued. This was before ANY had been delivered to the retailers and as I have said only two months after they had been announced. The retailers then contacted their customers, myself amongst them, and informed us of this. I have been trying ever since to get an answer from yourselves as to why this line had been discontinued in all countries apart from the USA market just two months after they were announced and before any had been sold except those sold in the USA. A greater part of the 10 million+ Galaxy S phones sold were not sold to the USA market yet that market is the only one that has these promised accessories available. If you cannot provide an answer would you now raise this enquiry to the next tier please.
Click to expand...
Click to collapse
The answer
Good afternoon Mr Pitman
The reason why the unit won’t be available in any of the Samsung subsidiaries is due to sales and marketing reasons. As a manufacture of many products, sometimes a product that is closed to being released can be stopped due to the market for that product changing and to this reason the product can become discontinued.
Unfortunately we are unable to provide you any other information regarding this product as we only handle the aftercare service of a product that has been fully released, nor can we advise who the best contact for your query is.
I can advise you to write a letter to the following address: Samsung Mobile, Samsung House, 1000 Hillswood Drive, Chertsey, Surrey KT16 0PS, I cannot guarantee that they will response quickly but you query will be looked into be that team.
Regards
Mark Gooden
Senior Customer Advisor
Executive Office
Click to expand...
Click to collapse
Well, thats a gilbert answer... Gadgetization is androids weakest spot. And what gadgets and bling there is, well its fairly low quality.
This is iPhone's main advantage. One design and a forest of 3rd party manufacturers that have grown out of their garages and become professional suppliers.
There would be a huge upside for Samsung/HTC/Sony to mimic this by setting up their own production lines to mimic that market. I guess the problem is no one in house is willing to risk their neck and the people that sit on the money don't understand this part of the iPhone world.
I don't want to use both hands while attaching the device to a car mount - so 3rd party accessories are no-go.
I ordered an original T959 Vibrant car mount for my international i9000: http://www.daydeal.com/product.php?productid=48828&cat=5138
They ship nearly worldwide. It's 10 days ago and I am still waiting for its arrival.
You guys should do the DIY one from this thread, I did it and it is amazing, it looks so good, and holds the phone really nice.
http://forum.xda-developers.com/showthread.php?t=837841&page=2
Dirt cheap too, for a custom mount the whole thing cost me maybe 10 bucks at the most, including the epoxy.
stepsch said:
I don't want to use both hands while attaching the device to a car mount - so 3rd party accessories are no-go.
I ordered an original T959 Vibrant car mount for my international i9000: http://www.daydeal.com/product.php?productid=48828&cat=5138
They ship nearly worldwide. It's 10 days ago and I am still waiting for its arrival.
Click to expand...
Click to collapse
So did you get your mount yet? Does the Vibrant mount work (properly) with the i9000?
Hi,
the first order was lost, so they sent another one, which arrived in 5 days or something like that.
Yes, it works as designed.
Snap it in, push the USB to the phone (the small box at one end of the mount) with one finger, that's it.
The phone detects immediately that it is a car mount and if you have installed the car app it starts also without delay.
stepsch said:
Hi,
the first order was lost, so they sent another one, which arrived in 5 days or something like that.
Yes, it works as designed.
Snap it in, push the USB to the phone (the small box at one end of the mount) with one finger, that's it.
The phone detects immediately that it is a car mount and if you have installed the car app it starts also without delay.
Click to expand...
Click to collapse
Same thing here with desk dock (original as far as I can say) bought in Poland on Ebay-ish website. Samsung's app downloaded from xda (it's here around somewhere) jumps in the moment I connect the phone. Have problems with line-out though, but I'm on custom ROM so maybe that's the problem.
Nevertheless it really looks like S is making monkeys out of us.
Nirvana388 said:
You guys should do the DIY one from this thread, I did it and it is amazing, it looks so good, and holds the phone really nice.
http://forum.xda-developers.com/showthread.php?t=837841&page=2
Dirt cheap too, for a custom mount the whole thing cost me maybe 10 bucks at the most, including the epoxy.
Click to expand...
Click to collapse
Very nice car kit indeed.
Looking for a car kit too....
Heard about their mounts here on this site and would very much like something to make my phone more usable in the car. Too bad they don't have a holder for us yet.
So I emailed their customer service and asked about it. Here's a snippet of their response:
Thank you for your interest in our ProClip Holders. Each of our holders are designed within millimeters of each device’s dimensions. At this time we do not have a Holder for the Samsung Infuse 4G. We do anticipate making one, however due to the large number of new products we are developing, we cannot give a specific date as to when this will be available. You will be notified by e-mail as soon as the Holder has been received at our warehouse and is ready for online ordering.
Click to expand...
Click to collapse
So when I hear anything back, I'll update the post. I think this along with a bluetooth deck will work nicely for turn by turn
J101 said:
Heard about their mounts here on this site and would very much like something to make my phone more usable in the car. Too bad they don't have a holder for us yet.
So I emailed their customer service and asked about it. Here's a snippet of their response:
So when I hear anything back, I'll update the post. I think this along with a bluetooth deck will work nicely for turn by turn
Click to expand...
Click to collapse
Got the same response when I emailed them last week.
Still very impressed/happy with adjustable ProClip holder I bought for iPhone 3G. I use it with the Body Glove Soft Gell and it holds Infuse perfectly. Used it the same with my Captivate and Body Glove and it survived a 75 mph sideswipe and slide on I-95. Made it to shoulder after getting missed by many other cars and phone was right where it was supposed to be
Haven't received an update from ProClip but just checked their site and it's listed. I've got one coming and will update again with a review next week if it comes in by the weekend
J101 said:
Haven't received an update from ProClip but just checked their site and it's listed. I've got one coming and will update again with a review next week if it comes in by the weekend
Click to expand...
Click to collapse
ProClip is the best. I have a whole drawer filled with their holders going back a number of years and variety of phones, the earliest being a Treo 650. They are absolutely great fit. Because they fit so well even a Zagg-like full Skin makes the fit too tight. That plus the fact you can't use it with a case makes it pretty useless (for me).
That being said I've recently ended up using only their adjustable holders. With the adjustable it will fit just about anything with and without a case.
J101 said:
Haven't received an update from ProClip but just checked their site and it's listed. I've got one coming and will update again with a review next week if it comes in by the weekend
Click to expand...
Click to collapse
They are awesome. This will be my 5th holder. But the one listed on the site is without the built-in power so I will have to wait a bit longer for that one.
Holly ****! ORDER SUBTOTAL USD $64.98 ESTIMATED SHIPPING USD $8.50
You can bet that I won't be ordering one.
They aren't for everyone. Supposedly this is the best unless you build your own. You might could find the piece that attaches to your car used and save a little...
Been using them since my Cingular/HTC 8125. Seven smartphones/two cars later they're still the best. Worth every, every penny. Got an adjustable one w/ 3G so it would accommodate Defender and still fits each of four phones/ cases later perfectly.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App