Ok ,once you have decided to install Android operating system(AOS) on your pc u'll need to..... oh wait! u must be wondering why did i create this thread since an android emulator already exists. This is why
1) This is not an emulator but a full fledged OS that can be installed along windows/linux
2) it's optimized for x86(32 bit Intel and AMD) processors so is a lot less laggy than the emu
3) it supports wifi, camera and u can install apps which you can't do on the emulator
Caution-
This build is primarily for laptops/netbooks and may not fully work on your desktop( there's no harm in trying though)
Depending on your version and Hardware, not everything may work properly
I'm not responsible for anything you do! (though i seriously doubt that it can do any harm but always exercise caution)
Once you are satisfied, lets begin
Requirements-
A USB pendrive with at least 256 mb free scpace
Internet connection
Common Sense
Downloading the tools-
1)First go to this site- http://www.android-x86.org/download and download the required image(choose which version and the model of ur laptop)
2) Visit this link - http://unetbootin.sourceforge.net/ and download Unetbootin for your OS(the one you are currently running)
Setting up the bootable image
1) Plug in your pendrive and run Unetbootin.
2) Select the "diskimage" radio button and load the ISO file
3) Set type to "USB Drive" and select ur pendrive from the drop down menu
4) Click OK and your pendrive is ready to be booted from
Booting up AOS
1) turn off your computer and plug in your pendrive
2) you need to change the boot sequence in the PC's BIOS. to do this keep pressing 'Delete" button or F12(depending on your motherboard, generally a line of text indicates the button to be pressed) on the boot/Splash screen and select external/usb as your first boot device
3) Once done, the AOS installation menu should come up, select the first option to try it without installing anything to your Hard disk.
4)If you want to install it to your Hard disk you might havta repartition ur HD to avoid windows being overwritten(i recommend not doing so but if you want to proceed, use the free software EASUS Partition Manager)
5) Bingo!! You should be running AOS on your PC now
Thank You
Thanks for starting this wonderful thread. I installed android on my netbook beside windows xp and it works great. it lets me choose which operating system i want to work with. i downloaded android-x86-4.2-20130228.iso from that website cuz i didn't know to use which one. i also created an ntfs partition for installing android. it perefectly recognizes my wireless and camera now. nothing is better than this. i'm happy with my netbook now.
thanks man....its working and its awesome!!!
Sent from my Xperia E dual using XDA Premium 4 mobile app
Sd Card Dual boot?
As you can see, Im new here... Does this require a partition to install, or can you boot straight form usb? My other question is can you do this the same from an sd card? Thanks in advance... Sorry if its a dumb question.
Jellypig1278 said:
As you can see, Im new here... Does this require a partition to install, or can you boot straight form usb? My other question is can you do this the same from an sd card? Thanks in advance... Sorry if its a dumb question.
Click to expand...
Click to collapse
Mmmmm.... i'm going to try it now. i have created extra partition using MiniTool Partition Wizard Pro Edition 7.5.0.1 and know i"m going to use sd card in card reader to create bootable pendrive.
wait......................................................
Ramesh006 said:
Mmmmm.... i'm going to try it now. i have created extra partition using MiniTool Partition Wizard Pro Edition 7.5.0.1 and know i"m going to use sd card in card reader to create bootable pendrive.
wait......................................................
Click to expand...
Click to collapse
i have created partition using MiniTool Partition Wizard Pro Edition but after that my pc was lost boot. it set the c drive inactive. i used windows cd to start again. unetbootin-windows-608 didn't work for me. i used Win32DiskImager-0.9.5 which has option to choose operating system android. after that it worked but i have got one more problem. i have installed the android into newly created partition and installation was completed successfully but again i lost boot. again i used windows cd to solve boot issue to make c drive active. after that i have directly run the android without installing. it worked and run very smoothly but it was not showing my hard disk even giving root access to file manager. so finally i have decided to go virtual box. now downloading virtual box but i want to boot android from menu because i have windows,linux in boot menu now i want android also.
FYI i was using desktop and i have photon plus wireless modem. which is detecting on ppp widget but not connecting because of operating system. it was android 4.4.2 cynogenmod(rooted) and cynogenmod wont detect the internal sd and ppp widget can establish a connection without having it files in internal storage. so my advice is choose your android carefully and you can even establish internet connection from your mobile using ppp widget. there is an way to make your internal sd get detected by using terminal emulator.
my pc details 1.6ghz amd processor,1gb ram having windows xp and puppy linux
virutual box didn't helped me. it was showing error. again i tried to boot android x86 using Universal-USB-Installer-1.9.5.5 and format the partition into fat 32 and installed grub for windows. this time worked booted into android
to install whatsapp use older version of whatsapp open it and it will ask u for downloading new version then download new version replace the app and your whatsapp will work. we chat and line are not working.
for games search for games for android x86
angry birds star wars,stella are working. ppsspp gold emulator is working. mx player and vlc are not working
Related
I am a user of linux and not windows, is there a way to flash the phone using linux? and some application available similar to active sync for linux or some application which detect the phone atleast as the storage device as everytime i have some app, which i find in my regular surfing, i have to copy it to my windows laptop and then to my tytn ii.
When i connect the phone using the usb cable with linux it is detected as a lan card.
I uses fedora 8
Regards
Tushar
gandotratushar said:
I am a user of linux and not windows, is there a way to flash the phone using linux? and some application available similar to active sync for linux or some application which detect the phone atleast as the storage device as everytime i have some app, which i find in my regular surfing, i have to copy it to my windows laptop and then to my tytn ii.
When i connect the phone using the usb cable with linux it is detected as a lan card.
I uses fedora 8
Regards
Tushar
Click to expand...
Click to collapse
You can't flash the phone under linux..and I don't recommend using a virtual pc app for flashing either as it can hose your phone. I run opensuse on all my machines..I'm actually tethered via usb right now..but I keep a windows laptop around to do all the flashing.
famewolf said:
You can't flash the phone under linux..and I don't recommend using a virtual pc app for flashing either as it can hose your phone. I run opensuse on all my machines..I'm actually tethered via usb right now..but I keep a windows laptop around to do all the flashing.
Click to expand...
Click to collapse
You can flash from the sim card directly.... There is mention of that somewhere.
famewolf said:
You can't flash the phone under linux..and I don't recommend using a virtual pc app for flashing either as it can hose your phone. I run opensuse on all my machines..I'm actually tethered via usb right now..but I keep a windows laptop around to do all the flashing.
Click to expand...
Click to collapse
http://www.cinetsystems.com/xda/Tips & Tricks/Flashing using MicroSD Card.one
There's a link for you.
I have flashed my titan many times using windows under virtualbox on pclinuxos. Some distro's have troubles with usb on vmware or virtualbox so you may want to shy away from doing that way. But thats the way I always do it.
ponch92 said:
http://www.cinetsystems.com/xda/Tips & Tricks/Flashing using MicroSD Card.one
There's a link for you.
Click to expand...
Click to collapse
You are restoring from a raw image stored on a storage card....that has nothing to do with "flashing under linux".....but I'll agree that it works as I keep an emergency copy of a stable rom on storage card for just that purpose.
I've used XP in virtualbox under Opensuse...I still don't recommend flashing that way but if you are willing to risk it feel free.
famewolf said:
You are restoring from a raw image stored on a storage card....that has nothing to do with "flashing under linux".....but I'll agree that it works as I keep an emergency copy of a stable rom on storage card for just that purpose.
I've used XP in virtualbox under Opensuse...I still don't recommend flashing that way but if you are willing to risk it feel free.
Click to expand...
Click to collapse
but the thing is i cant even access my phone as a storage device under linux. are there some drivers available for that??
gandotratushar said:
but the thing is i cant even access my phone as a storage device under linux. are there some drivers available for that??
Click to expand...
Click to collapse
Google on "wm5torage"
synce
There is a software called synce. It will require a kernel compile.
Thanks,
Alex
I have a Fujitsu P1120 touchscreen netbook. I have been trying to dual boot android with the windows xp that is on there but have had no success. I cannot seem to figure out the right way to put android on the hard drive. It keeps coming up with a grub error for invalid filesystem. I have downloaded liveandroid, android 86x. The main problem that I have is that my device doesn't support booting from usb, booting from network, or any usb external drive. So the only way I can get it to work is to manually install android but I don't know how to do that.
Can anyone help me with this please?
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
monedadeoro said:
i have same problem , i want to install android on fujitsu p1120, but i see installation freezed, now i want to test froyo android
Click to expand...
Click to collapse
i have tried everything that I can think of besides, network installation. I can't figure out how to set up the server to do it.
How version android x86 work in lifebook p1120?
The touch screen work in android?
I see the information about touch....
http :// ariescomputing .com/lifebook/
I so happy now.. i found one dvd-rw usb work very fast in the my fujitsu...
Is liteOn Slim USB (have 2 usb) dvd-rw and the bios work..
To put it bluntly you're trying to get your netbooks to do something it isn't intended to do. Those thing are built with the absolute bare minimum to do pretty much nothing more than browse the web, hence "netbook". It's not a full PC. Even the newer ones don't run a full version of Windows 7. Short of knowing how to re-write a BIOS image or finding a modified one and flashing it, which has the risk of perma-bricking your computer.
Волк,
Sorry my bad english..I have a good computer, phone and tablet. However I like to modify my old electronics giving new life to them .... Now for example I'll replace the HDD Fujitsu Lifebook P1120 IDE for SSD and I'll put a PCMCIA card with internal memory to speed up Windows. I installed windows 7 and it is working. So I had to make a modification in winsetup.dll to install.
At the moment I install Android but I am having difficulties.
Hi Installed Ubduntu in my USB drive and booted ubuntu from my USB drive.. After that i created couple of shortcuts in my desktop and installed Real player for playing music.. i shutdown the PC after finishing my work.
But when i booted next time from USB in desktop noting was there and i couldn't find the programs i installed (Realplayer,Vlc)
Anybody can tell me why it is happening?
It sounds like you just installed the apps on the virtual drive and did not actually install it to the device
who can i change the installation location?
And wat about the files which i saved in my desktop?
What you have installed to your USB is the livecd, and not a persistent install. What you currently have now on your USB is the livecd, so you can try it out and install to your PC from the USB drive. There is a way to actually install it to your USB drive persistently. I would post the link here but I don't have enough posts yet, so you have to google
I don't know with which method you created the ubuntu stick. But i recommend doing it with the wizard tool from ubuntu.com.
Universal USB Installer
Screenshot
There you can also add persistence, which is then saving the changes you are making to the live system. Anyhow, for a real productive system i can only suggest to do a full install, instead of running it all from stick.
@Xadro
Thanks for ur response
I installed ubuntu 10.10 in my USB.. and i used universal installer 1.8.3.3 to install ubuntu in my USB.. During the installation i didn't get any option to select the persistent which u showed in the screen short
jealumalai111462 said:
@Xadro
Thanks for ur response
I installed ubuntu 10.10 in my USB.. and i used universal installer 1.8.3.3 to install ubuntu in my USB.. During the installation i didn't get any option to select the persistent which u showed in the screen short
Click to expand...
Click to collapse
I think your usb stick is too small try at least 2gb, the bigger the better.
Just been trying this myself with the newest version (1.8.4.5)
With my 1 gb stick i can't select persistance, with my 4 gb stick it gives me up to 2 gb persistence space.
I love ubuntu. However, I haven't installed it. Just usually boot it off of my usb. trying to find uses for it.
@Xadro
I tried with 4GB Perdrive and then i select 1GB persistence.. still whatever the program i installed will not be there once i reboot the PC.
jealumalai111462 said:
@Xadro
I tried with 4GB Perdrive and then i select 1GB persistence.. still whatever the program i installed will not be there once i reboot the PC.
Click to expand...
Click to collapse
I'll take a look at it asap. Unfortunately im a little busy atm. Think i could have a look at that tomorrow.
Sent from my Desire Z
Okay, so some of us were in this boat. You have to reinstall Windows on your nice little Surface Pro tablet. But sadly you don't have a recovery partition or a flash drive! So what are you supposed to do?
Well, first you ask Microsoft support. That does not go well: they tell you to send them your Surface. But that's not really a good option - to lose your tablet for two weeks over a software problem? That's just not fair!
So, next, you try googling for help. But all you ever find are similar unanswered pleas for help, which usually end up being either unanswered or closed by moderators.
But fear not, as you CAN solve this, and you don't even need to do crazy things like making your own recovery image, or downloading one from weird Chinese sites.
----
HOW TO REINSTALL WINDOWS 8.1 ON YOUR SURFACE PRO WITHOUT A RECOVERY PARTITION/USB
Step 1.
Obtain a Windows 8.1 ISO. I can't tell you where to obtain one, but it is not a hard task.
The flavor Surface Pro uses is Windows 8.1 Pro x64. I used the EN-US version, as I have an American Surface, so I can't verify how other languages will work.
Step 2.
Burn that ISO to a USB drive. I suggest using Rufus for that: http://rufus.akeo.ie/
Step 3.
Boot your Surface from the USB drive.
To do that, hold the volume down button when turning on your Surface
Step 4.
Install Windows 8.1.
Step 4.5.
It will ask you for an install key, and might not accept your real Surface key. The reason for that is that the installer for Windows 8.1 does not accept Windows 8.0 keys (and your Surface might have one of those).
To proceed with installation, you will need this install key:
XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB
Click to expand...
Click to collapse
This key is for installation only. IT DOES NOT ACTIVATE WINDOWS.
Step 5.
After installing the OS, you'll notice that it's not behaving quite right, for example, there are 4 rows of tiles on the start screen instead of three.
Go to Windows Update, and install everything.
Step 5.5.
If you installed with the install key, use this utility to get the original Windows key: http://forums.mydigitallife.info/threads/30363-Windows-8-Product-Key-Viewer
Choose the "MSDM" option, copy that key, and activate Windows with it.
Step 6.
Enjoy your happily recovered Surface.
----
So there. That was a little guide on how to recover a Surface Pro without a recovery drive. I was in this situation myself recently, and Microsoft offered me to send my Surface to them - which would've cost me $200, as I live in a different country from the one my Surface came from, and also would've meant living without my tablet for a month or even longer. So I just fixed it all myself.
A lot of people seem to be posting in that other recovery thread, so I'm just gonna make this visible again.
Only one question, do I need a keyboard or mouse for that?
Cause I've got only wireless mouse and original type cover, which does not work for some reason, and that's why I want reinstall windows.
I think it should pop up the on-screen keyboard if you use touch.
Anyone else did this process and got the Surface Pro 2 back to "out of the box" state?
touch screen
has anyone of you got the issue with the touch controller? and after the windows reinstall did it come back?
regards
Worked perfect
Worked perfect on a MS Surface Pro 1, with windows 8.1 Pro install USB, no keyboard or mouse needed.
Thank you! :good:
Thanks a heap for this guide, thought my Surface was done for.
For those unable to boot normally into Windows, holding VolKeyDown + Power while the unit is off will force the unit to boot from removable storage (doesn't have to be a USB Stick, you can plug in any kind of bootable media, including a USB DVD-ROM).
Have fun!
Can this works for Surface Pro 2
westjgames said:
Thanks a heap for this guide, thought my Surface was done for.
For those unable to boot normally into Windows, holding VolKeyDown + Power while the unit is off will force the unit to boot from removable storage (doesn't have to be a USB Stick, you can plug in any kind of bootable media, including a USB DVD-ROM).
Have fun!
Click to expand...
Click to collapse
Hi,
Can this method work for surface pro 2?
syahchrono said:
Hi,
Can this method work for surface pro 2?
Click to expand...
Click to collapse
I'm gonna try this now on my Surface Pro 2 because I got one with only scandinavian languages and I'm from Germany ^^ Will report back!
# UPDATE #
Worked perfectly fine
question
I just installed the latest Firmware / Drivers MS has pushed through Windows Update,
and i would like to refresh my Surface Pro 2 to get a clean install.
- First thing i did was create a bootable usb drive using Microsofts new 'Create Installation Media Tool'
. I selected 'Windows 8.1 Pro x64' in my native language which is Dutch.
The tool created a bootable USB stick, which i haven't tried yet.. before i continue i have some questions;
....
1. I copied my recovery image to a USB stick and deleted the recovery partition.
- If i reinstall Windows can i still use the recovery usb in case something goes wrong during the installation, or is it linked to your current installation?
2. Would Windows automatically recognize the serial number, which i believe is stored in the BIOS / UEFI, and activate Windows? I've written down the serial using the tool mentioned in the OP to be on the safe side.
3. Like i mentioned before, i installed the lastest driver / firmware package, will Windows automatically install the latest drivers after installation or first install more basic drivers to get WiFi up and running and then install the latest drivers?
4. When you install new driver / firmware software will Windows automatically update the then older drivers in the recovery image?
I've read the previous posts saying that everything went smoothly, but i just want to make sure i'm not forgetting anything..
i have a Surface Pro 2 btw!
koffiemelk said:
I just installed the latest Firmware / Drivers MS has pushed through Windows Update,
and i would like to refresh my Surface Pro 2 to get a clean install.
- First thing i did was create a bootable usb drive using Microsofts new 'Create Installation Media Tool'
. I selected 'Windows 8.1 Pro x64' in my native language which is Dutch.
The tool created a bootable USB stick, which i haven't tried yet.. before i continue i have some questions;
....
1. I copied my recovery image to a USB stick and deleted the recovery partition.
- If i reinstall Windows can i still use the recovery usb in case something goes wrong during the installation, or is it linked to your current installation?
2. Would Windows automatically recognize the serial number, which i believe is stored in the BIOS / UEFI, and activate Windows? I've written down the serial using the tool mentioned in the OP to be on the safe side.
3. Like i mentioned before, i installed the lastest driver / firmware package, will Windows automatically install the latest drivers after installation or first install more basic drivers to get WiFi up and running and then install the latest drivers?
4. When you install new driver / firmware software will Windows automatically update the then older drivers in the recovery image?
I've read the previous posts saying that everything went smoothly, but i just want to make sure i'm not forgetting anything..
i have a Surface Pro 2 btw!
Click to expand...
Click to collapse
1:I have no idea
2: Yes it will, I have a surface pro 1 and it was activated automatically, so i didnt had to do anything with my serial. (on a new windows 8.1 install)
3: Yes it will, but you can always install them manually (doesn't really matter unless there are issues with drivers).
4: Dont know (dont think so). (I havent ever uses a recovery installation ever, i always install everything manually back on .
Hi together,
I did the steps and everything went fine. But I had to disable secure boot at first.
Now, after the isntallation of Windows 8.1, I activated it again and reinstalled the default keys. Is this the way it is meant?
Or do I need to leave it disabled?
Thank you very much!
Best regards,
thrain2
So I have a question.
I removed my recovery partition to regain the space.
Does your method reformat the drive and repartition everything? Will it reinstall the recovery partition?
I remember all former windows os installations I've done allowed me to format the drive and clear the partitions and then either create new ones myself or use the blank disk. Win7 would (on a blank disk) create it's recovery partition.
So I went ahead and did it.
To anyone looking to do this, use the official media creation tool. It's free from Microsoft and extremely simple.
I didn't have to disable secure boot or anything, just hold down the volume and power button with the USB plugged in.
The installer let me delete all my existing partitions and it automatically created only the ones needed.
It never asked for a key and was activated correctly when I booted into widows.
I found the installer created 3 total partitions on it's own.
1st a 300mb empty partition which I believe is supposed to be for windows RE and required by bit locker.
2nd a 100mb partition containing an EFI folder.
Note: these two aren't supposed to be accessible, I did special mounting to check them out.
3rd the rest of my disk space was created for my system partition
I'm mostly happy with this.
The only issue I've had so far is I can't turn bit locker on, even though there is a 300mb partition, it's empty and bit locker complains about the widows recovery environment not being on the system dive.
iXNyNe said:
So I went ahead and did it.
To anyone looking to do this, use the official media creation tool. It's free from Microsoft and extremely simple.
I didn't have to disable secure boot or anything, just hold down the volume and power button with the USB plugged in.
The installer let me delete all my existing partitions and it automatically created only the ones needed.
It never asked for a key and was activated correctly when I booted into widows.
I found the installer created 3 total partitions on it's own.
1st a 300mb empty partition which I believe is supposed to be for windows RE and required by bit locker.
2nd a 100mb partition containing an EFI folder.
Note: these two aren't supposed to be accessible, I did special mounting to check them out.
3rd the rest of my disk space was created for my system partition
I'm mostly happy with this.
The only issue I've had so far is I can't turn bit locker on, even though there is a 300mb partition, it's empty and bit locker complains about the widows recovery environment not being on the system dive.
Click to expand...
Click to collapse
Thanks for sharing this.good
Anyone tested this yet with a surface 3 or surface 3 pro?
Tried this with my Surface 3, which is stuck currently on Win10 10074, and the install key didn't work.
It works
I used the freeware ISO2Disc to burn a Windows 10 ISO file to my USB drive and I can then reinstall successfully. Remember to choose GPT partition style as Surface Pro can boot in UEFI mode only.
iXNyNe said:
The only issue I've had so far is I can't turn bit locker on, even though there is a 300mb partition, it's empty and bit locker complains about the widows recovery environment not being on the system dive.
Click to expand...
Click to collapse
I did basically the same, reinstall a clean Windows on my Surface pro 3, but can not turn on bit locker, too. Have you figured out, how to solve this issue?
Hello,
Here is the steps to upgrade the 64GB version (Sorry I d'ont have the 32GB to test) from 4.4.2 stock firmware to 4.4.4 stock firmware . (you will lost your windows 8.1 boot, but don't worry here are the steps to reinstall it)
I am not responsible for any damage of your device.
Before starting you need to buy :
a keyboard
a keyboard
an usb key 250Mbytes (minimum)
an usb key 6Gbytes(minimum)
an OTG micro usb HUB like this one Inateck ultra-mini 4-port USB Hub micro usb OTG hub , at least you need 3 port USB : one for the keyboard , one for a USB key (FAT32) , one for the USB key (NTFS).
After the upgrade your Android will be in chinese , but it's easy to change the language, go to the parameters screen-->click on the square icon with a "A" inside-->click on the first line-->choose your language.
You can find the adb driver and/or root the tablet on my other post root & drivers
0)If your tablet is booting on windows , switch to android
1)Download the update kit : http://ul.to/la0uhu2r
2)unzip it
3)connect your tablet to your computer , and put your tablet in fastboot mode ( power on+volume up)
4)launch the flash.bat , wait ...and the tablet will restart
5) et voilà!!!!
And now the step to install Windows 8.1 :
0)Boot your tablet on android , and switch the tablet to Windows, the tablet restart and fail to boot ( it's ok) , you need to do this to install Windows on the good partition
1)Download the windows boot program : FAT32.zip
2)Unzip on a formated FAT32 USB key (250Mbytes minimum)
3)Download the windows 8.1 official chuwi image (13 parts) :
http://ul.to/fefdtn4r
http://ul.to/yqrtueoz
http://ul.to/e3jmy6bg
http://ul.to/9lgaucdu
http://ul.to/qxbk2117
http://ul.to/fgpznpwk
http://ul.to/9r8rj445
http://ul.to/vobsv1a8
http://ul.to/8tbxm97m
http://ul.to/v6j1kufc
http://ul.to/2hd605ra
http://ul.to/awcux5s0
http://ul.to/8yecpg4m
4)Unzip it on a formated NTFS USB key (6Gbytes minimum) , you will have a folder "images" on your key
5)Start your tablet with Power on+Volume up , the tablet will boot on a screen with big icons
6)Plug the USB HUB , plug on the Hub the keyboard and the FAT32 USB key (with the boot program)
7)with the keyboard , select the icon "Boot from file"
8)Select the "bootmgr.efi" , before pressing enter ,Plug the NTFS USB KEY , then press enter
10)Wait and watch the installation.
11)Done!!
Here is the driver for the hardware for Windows 8.1 http://ul.to/j6ycogwi, unzip on your Tablet ,use only if have undected hardware
mirrors:
Android 4.4.4 :
http://uptobox.com/53h778qdd8lu
Windows 8.1
http://uptobox.com/wjlo3olu4r81
http://uptobox.com/arrshmckb82z
http://uptobox.com/mwpw84bmganh
http://uptobox.com/by7znx2b7ke2
http://uptobox.com/ag6h73jtrlps
http://uptobox.com/1xiks7exj5jv
http://uptobox.com/jsafn5ghggds
http://uptobox.com/z9gecah2prkg
http://uptobox.com/r2obgzr8f01x
http://uptobox.com/ule17ewqwkx0
http://uptobox.com/fi1fddl517g5
http://uptobox.com/kd9tg1fpzc96
http://uptobox.com/67o2mbfc8kk2
Thanks!
I'm going to buy this tablet. It's a same nobody is buying it. Little bit too expensive but looks great and there is not much 64gb dual boot 16:10 offer on chinesse tablets.
Yeah the 64gb is great.
I got a 32gb one for my cousin sis. still didnt start to play with it. by the way, where did you got the 64gb one? I looked lot of aliexpress sellers but only 32gb was available.
suspect008 said:
I got a 32gb one for my cousin sis. still didnt start to play with it. by the way, where did you got the 64gb one? I looked lot of aliexpress sellers but only 32gb was available.
Click to expand...
Click to collapse
I have bought mine here : http://www.banggood.com/CHUWI-V10HD-3G-Intel-Z3735F-Quad-Core-10_1-Inch-Windows-8_1-Tablet-p-950058.html
funregis said:
I have bought mine here : http://www.banggood.com/CHUWI-V10HD-3G-Intel-Z3735F-Quad-Core-10_1-Inch-Windows-8_1-Tablet-p-950058.html
Click to expand...
Click to collapse
whoa its 279$ for 64gb one. I got mine for 170$ for 32GB. nice tablet though.
It's 230$
funregis said:
It's 230$
Click to expand...
Click to collapse
for 32gb its 230. theres a link link for 64gb and its 279. so far soo good. I didnt expect android part to have the FHD resolution. but its also crisp as windows. just now im starting to use it and first thing is to root.
suspect008 said:
for 32gb its 230. theres a link link for 64gb and its 279. so far soo good. I didnt expect android part to have the FHD resolution. but its also crisp as windows. just now im starting to use it and first thing is to root.
Click to expand...
Click to collapse
I ve put the wrong link http://www.banggood.com/CHUWI-V10HD-Intel-Z3735F-Quad-Core-10_1-Inch-Dual-Boot-Tablet-p-972458.html I've paid 203$ for the 64GB
funregis said:
I ve put the wrong link http://www.banggood.com/CHUWI-V10HD-Intel-Z3735F-Quad-Core-10_1-Inch-Dual-Boot-Tablet-p-972458.html I've paid 203$ for the 64GB
Click to expand...
Click to collapse
Ah I saw that too. When Im ordering, it was already sold out. anywa, funregis, can you check my comment at your v10hd rooting thread. I think script is not working for me. I jsut press "Enter" for every screen.
I get a 32G version, but on BIOS no mouse, no keyboard , no touch. I can not do any thing on BIOS, just see (can be change bethwen "Continue" and "Boot From File" by Volume Up and Down but can not select) and then power off. Do any ones know what is problem (USB key board and USB mouse run OK on windows 8)?
My serial is V10HD 3G Q32G25150500483.
Plesae help me!
do you use an usb hub to connect your keyboard and mouse? strange try another keyboard or mouse . try to plug before you power on your tablet
Hello, I'm in need of the drivers of this model. I tried to click the site you have given here but it won't connect. It seems the web site is no more. Could you please share another site where I can get these drivers. I can no longer find the drivers on the official site. Thank you very much.
lawas said:
Hello, I'm in need of the drivers of this model. I tried to click the site you have given here but it won't connect. It seems the web site is no more. Could you please share another site where I can get these drivers. I can no longer find the drivers on the official site. Thank you very much.
Click to expand...
Click to collapse
https://yadi.sk/d/slPmbtdzdqC69
or
http://4pda.ru/forum/index.php?showtopic=624224&st=500#entry41455893
Thank you very much. This is a great help for a backup driver. On the other hand I did found another way to backup my drivers. the software name is "double driver". It works well, backing up and restoring pc drivers. I have just a clean install of Windows 10 and restoring the drivers with this software. Thanks again.
Two questions
Hi and thanks. I have two very important questions:
1-does this tablet have bios setup? In other words, can I setup a legacy boot to install windows 10 from USB?
2- when formatting to install new windows, will Android be removed too? If no, is there any way to completely format the disk and install only a new windows?
hnodet said:
Hi and thanks. I have two very important questions:
1-does this tablet have bios setup? In other words, can I setup a legacy boot to install windows 10 from USB?
2- when formatting to install new windows, will Android be removed too? If no, is there any way to completely format the disk and install only a new windows?
Click to expand...
Click to collapse
1. Hello, to enter in bios setup, you need a USB keyboard and a 2 or 3 ports USB hub with micro USB to be connected at the tablet. You turn on the tablet and while the display turns on with its chuwi logo, you must in time press the exit key on the keyboard. With that, it will enter on its bios mode.
2. In my case, my chuwi v10hd version, I only have the windows 8.1 installed and updated it to Windows 10. After that I decided to have a clean install to Windows 10. I made a bootable USB by using Rufus, converting iso image of Windows 10 to uefi bootable usb image. That's my case. In your question, if you're going to update windows to version 10, I think windows will overwrite the boot loader and booting to Android will not be possible. I think the android partition will remain intact if you will not format it. If you want to install only windows 10, it will be much easier. You can delete all partitions that is, windows and android and install Windows 10. Windows will take care the rest of the formatting and installation. This is done by custom install on Windows 10 installation. A suggestion, if you want a clean install, you have to backup your drivers and restore them after clean install. I used double driver for backup and restore. Another is have a copy of your serial number of Windows 10. Hope this can be a help.
desperately in search of a Bios
Hi,
may somebody has a Bios and the right tool for me to flash my Chuwi V10HD 3G.
I locked my self out of the bios configuration with disabling the USB keyboard support in the bios,
may somebody has another way to reset the bios without opening the Tablet.
I tried a lot of things already, but nothing helps.
But the Windows is still working, but indeed no USB support in Windows after I accidentally disabled it in Bios.
Thanks a lot for any help.
Regards
freez3
Has anyone been able to update the android to a newer version? The links are broken.
Thank.