Database Info

Can't root my Sensation- Please Help!

I have an HTC sensation z7z10a. I purchased this phone to be able to get on AT&T's 3&4g frequencies without having to upgrade my unlimited data plan for non smart phones. So far so good, my phone gets 4g and AT$T is not aware that I have a smartphone.
Naturally after spending enough time in XDA and other phone forums to figure this out I became interested in flashing a custom ROM.
I used the revolutionary method to gain S-OFF, installed CWM, and used CWM to create a backup image. I've managed to fully wipe and then restore to my backup image, so CWM is working.
My problem is whenever I go to flash a custom rom I don't understand which file to select in recovery mode. Every zip I have downloaded, (including the one I need to finally get my phone rooted) opens up to a series of subfolders, none of which contain the files I need. The sub folders are typically : System, Data and META-INF. So I can't get rooted without being able to use the recovery mode to flash.
I used my friend's pc netbook in order to run Revolutionary and install CWM. Now I am using my Macbook Pro to download potential Roms zip files and move them onto my phones SD card. Could this be the problem?
I"ve searched and searched for and answer to this issue to no avail, please help me to figure this out. I'm stumped.

The zip you have to flash is the ROM you download...am I missing something?

You do not need to extract the zip file. Just put it on the SD card and then go to the recovery mode and select the option install zip from sd card and install it. I believe if you flash a custom rom, you would be automatically rooted, so no need to root it separately. Hope this helped

aNYthing24 said:
The zip you have to flash is the ROM you download...am I missing something?
Click to expand...
Click to collapse
Exactly- I don't understand why it won't work.

SickL1408 said:
You do not need to extract the zip file. Just put it on the SD card and then go to the recovery mode and select the option install zip from sd card and install it. I believe if you flash a custom rom, you would be automatically rooted, so no need to root it separately. Hope this helped
Click to expand...
Click to collapse
Thanks for this advice, this is my first time attempting this. I think you are right that most roms come with root access so I may be able to skip that step.
I know what you are saying, don't extract the file, just move the zip over as is. Only on my mac the files are arriving as a folder with subfolders, not a zip package. This HAS to be the problem! I will look harder for Mac info on downloaded zips to see if I can figure out why this is happening. Thanks again.

Update:
So I fixed the folder problem by going into safari settings and unchecking the open safe downloads box. No all the zip files I'm downloading are staying intact as zips.
However I just tried to flash revolution hd with no success. The full wipe zip for this rom was a failure as well. I will now try downloading the root zip again and see if rooting first helps at all.

So now I am rooted. Success!

imru88 said:
Update:
So I fixed the folder problem by going into safari settings and unchecking the open safe downloads box. No all the zip files I'm downloading are staying intact as zips.
However I just tried to flash revolution hd with no success. The full wipe zip for this rom was a failure as well. I will now try downloading the root zip again and see if rooting first helps at all.
Click to expand...
Click to collapse
Ah....Steve Jobs and his desire to prevent the user from doing anything useful strikes from beyond the grave.
This is why I won't touch a Mac. They want to do everything for you, even if it's not what you want or need to be done. On the plus side, at least you only have to push 1 button to get the Mac to do the wrong thing!
Glad you figured it out! Be careful with the ROM flashing though. It quickly becomes a life consuming obsession.

ROM LG Optimus Net LG L45C Only

READ ME FIRST!! USE AT YOUR OWN RISK!! I and/or XDA are not responsible if this bricks your phone!!! If this transforms your phone into a decepticon and shoots your eye out...
OK....what a few months its been...sorry guys been out of commission...car wreck...
Had to start over...so here we go..
First...You must be rooted...if not google it..
install your favorite root file explorer
install your favorite term emulator
ok got that...now the good stuff..
download http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v6.0.1.2.zip
or http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v5.0.28.zip
this is the cwm recovery 6.0.1.2 compiled from source by me...it is only for the L45C...Cant stress that enough...had to make changes to graphics from source to get it to work...
also the v5.0.28 recovery because as of now v6.0.1.2 has no sdcard partioning support because it is new.
you can choose which you like best...
put on root of your sdcard ...
make sure the file name is recovery.img
now download http://dl.dropbox.com/u/56403887/flash_image.zip
this is the flash_image file to to flash the recovery..
unzip it should have the name flash_image
use root explorer to copy the file to /system/bin
open term emulator get su rights and cd to /system/bin and type chmod 0755 flash_image
now cd back to /
still with su rights type flash_image recovery /sdcard/recovery.img
if no output... wahoo.... if you get error start over
dont reboot yet...
go to playstore and download a app called Quick Boot its free and handy you want have to hold buttons to reboot into recovery..
ok...now the moment of truth run quick boot and choose recovery...you should get a su ask from superuser grant it....phone should reboot into cwm recovery...if it did... wahoo... you now have cwm
keymap is fixed and is like this.... search button to select.....return button to return..home button to scroll..
way better than before,,,to me any way...
still will get error about bad boot message but i will fix later it don't affect anything..
Here is the stock rom , rooted , busybox , http://dl.dropbox.com/u/56403887/Stock_L45C_Rom.zip
Here is the stock recovery also http://dl.dropbox.com/u/56403887/L45C_Stock_Recovery.zip
i am at present working on kernel...for cm7...
Give thanks to Koushik for CWM...And to TWO.BIT.CODER for all the help...Thank You...

Reserved

Hey ICE.....Is it suitable for Optimus Net P690 in India.....?????

Does this support custom themes?

p690f can't get qtadb to link phone/PC
Hi
I am stumped, as a complete novice to smart phone/linux.
At present my status is:
1. Phone is rooted, so I was able to get this done from my PC.
2. Now I have copied the recovery.img & flash.img to SD card.
3. I have Terminal emulator on phone &/or Sd card.
4. When in USB storage is activated & connected to PC, I can see all the files but on terminal emulator.
5. I have Qtabd on my PC but it will not 'see' my phone either in USB storage activated or not activated or in debug mode.
6. When debug mode activated, USB storage is deactivated. Seems both not able to be on.
7. In one of the XDA threads there was mention of 'demounting' the sd card so have also tried that in same combinations of SD/ debug.
I have been trying to sort this out on another forum but seems there is more info available on here.
I am having a huge problem tying to get Recovery working direct on the phone, mainly due to my inexperience on these devices, I am very happy to learn if pointed in right direction. Of course my concern also is not to brick the phone!!
Any assistance or links to suitable areas appreciated.
Whoops seems I posted on wrong thread, thought it was the similar one for P690, applogies.

WaHooo
I managed to finally get recovery activated using the terminal emulator on the SMALL screen of my phone!!
However I would still very much appreciate sorting out Qtadb connection as I am sure sometime in the future I will need to do some additions/deletions to my p690.
So, any info etc will be appreciated.
For any other Newbies who may see this,
1. To copy from a browser text long touch at start/end of text, then drag to high light.
2. To copy, touch highlighted area, you should get a message 'copied to clipboard'. To cancel, if you make a mistake like I made MANY touch some where else on screen.
3. With Terminal emulator started, (P690), after entering 'su' tap touch screen to bring up keyboard and select 'return/enter key'. This gives you Super User.
Long touch screen brings up menu withe 'paste',select.
4. To toggle back to browser, to same screen you were working on, hold down second key on bottom. This will bring up all the recent icons for what you were working on, select 'browser'. Continue copy line by line.
5. To toggle back to emulator, long press 2nd from left key & select emulator.
Hope this assists someone.

The p690 and this phone are not the same. This phone is from Net 10, idk about the p690, but this phone is. This one is also cdma. I think the p690 is gsm. They are NOT cross compatible. I'd brick my phone if I used a p690 rom.

sorry guys been working on code....
oldfella2... spark is right... this is for l45c on net10 or tracphone...only...the p690 is diff...there is a thread here on that phone...spark you can coustom theme. I haven't yet but I don't see why not...
I have been able to unlock bootloader and to fix cwm recovery for this phone..will post it here later this week...also been testing cm7....but I can't seem to find wifi bug... it drops and reconnects const...

lce67 said:
sorry guys been working on code....
oldfella2... spark is right... this is for l45c on net10 or tracphone...only...the p690 is diff...there is a thread here on that phone...spark you can coustom theme. I haven't yet but I don't see why not...
I have been able to unlock bootloader and to fix cwm recovery for this phone..will post it here later this week...also been testing cm7....but I can't seem to find wifi bug... it drops and reconnects const...
Click to expand...
Click to collapse
dude! if you can get cyanogen working i will be forever in your debt

Update please
Hi there. Been crack flashing my phone for a while and finally got my wife's phone rooted today.
Just wondering if anyone has had any luck flashing a custom recovery yet (eg CWM or Amon Ra)? If so, please post a guide. As I have been unable to find anything using my Google-fu.
Also, all your links were removed. So other than hinting at a solution. This thread is zero help.
Thanks in Advance!
My Phone: HTC Evo 4G (flashed to Cricket)
Wife's Phone: LG Optimus (LGL45C)

I have a question regarding etc..... Does your rom include a tun.ko file and if not do you know of anyone or anyway to run openvpn/droidvpn or just changeing kernels would be nice...

I can't root.
I have an L45C with 2.3.4 on it and it just won't root. I have tried: Gingerbreak, z4root, and unlock root, none of them worked. I tried gingerbreak a few times at day, and all night as I slept, but my phone just isn't rooting!
If any of you have gotten root please do tell me how.

no updates yet?

Can someone please post a link to this ROM? I had it but can't find ir and I need it bad, phone is semi-bricked and I have a corrupt backup. PLEASE!!
Regards,
rast4man

request fulfilled

Request fulfilled

lce67 said:
READ ME FIRST!! USE AT YOUR OWN RISK!! I and/or XDA are not responsible if this bricks your phone!!! If this transforms your phone into a decepticon and shoots your eye out...
OK....what a few months its been...sorry guys been out of commission...car wreck...
Had to start over...so here we go..
First...You must be rooted...if not google it..
install your favorite root file explorer
install your favorite term emulator
ok got that...now the good stuff..
download http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v6.0.1.2.zip
or http://dl.dropbox.com/u/56403887/L45C_CWM_Recovery-v5.0.28.zip
this is the cwm recovery 6.0.1.2 compiled from source by me...it is only for the L45C...Cant stress that enough...had to make changes to graphics from source to get it to work...
also the v5.0.28 recovery because as of now v6.0.1.2 has no sdcard partioning support because it is new.
you can choose which you like best...
put on root of your sdcard ...
make sure the file name is recovery.img
now download http://dl.dropbox.com/u/56403887/flash_image.zip
this is the flash_image file to to flash the recovery..
unzip it should have the name flash_image
use root explorer to copy the file to /system/bin
open term emulator get su rights and cd to /system/bin and type chmod 0755 flash_image
now cd back to /
still with su rights type flash_image recovery /sdcard/recovery.img
if no output... wahoo.... if you get error start over
dont reboot yet...
go to playstore and download a app called Quick Boot its free and handy you want have to hold buttons to reboot into recovery..
ok...now the moment of truth run quick boot and choose recovery...you should get a su ask from superuser grant it....phone should reboot into cwm recovery...if it did... wahoo... you now have cwm
keymap is fixed and is like this.... search button to select.....return button to return..home button to scroll..
way better than before,,,to me any way...
still will get error about bad boot message but i will fix later it don't affect anything..
Here is the stock rom , rooted , busybox , http://dl.dropbox.com/u/56403887/Stock_L45C_Rom.zip
Here is the stock recovery also http://dl.dropbox.com/u/56403887/L45C_Stock_Recovery.zip
i am at present working on kernel...for cm7...
Give thanks to Koushik for CWM...And to TWO.BIT.CODER for all the help...Thank You...
Click to expand...
Click to collapse
DUDE! Thanks a TON! Now I can get my phone working again! Sorry to hear about your wreck and I wish you a speedy recovery! Thanks again!
Regards,
rast4man

ROM/Recovery LGL45C
What are the results of flashing this recovery? Was it successful to flash as I have a backup for the phone that I have made thankfully.

results are great. For what little ROM development, this is the best we have. Its just a ClockworkMod recovery image and then a rooted ROM. I'm still using it to this day and with all the apps and tweaks I've added, this phone rocks!!
My only complaint is I'm running out of internal space so I need to figure something out with that. Maybe I will try to re-partition my card to ext4 and try to increase internal memory by like 100mb. Apps2SD only goes so far sadly. I'm also going to try to put Team Win recovery on after I make sufficient backups. Let me know if I can help.
Regards,
rast4man

rast4man said:
results are great. For what little ROM development, this is the best we have. Its just a ClockworkMod recovery image and then a rooted ROM. I'm still using it to this day and with all the apps and tweaks I've added, this phone rocks!!
My only complaint is I'm running out of internal space so I need to figure something out with that. Maybe I will try to re-partition my card to ext4 and try to increase internal memory by like 100mb. Apps2SD only goes so far sadly. I'm also going to try to put Team Win recovery on after I make sufficient backups. Let me know if I can help.
Regards,
rast4man
Click to expand...
Click to collapse
I was able to install the CWM Recovery to the phone just fine. Realized what I was doing incorrectly. Now to test the only ROM's that I know of that are available for the Q from Area51. Are there anymore ROM's being developed. The L45C is not a bad phone, just needs more lightweight ROM's to work with it.

Just picked up a sidekick 4G. Need to know what to do.

I recently sold my galaxy note for 400 but the kid only had 375 but gave me his sidekick as well.
And I want to know what i need to do in order to instal Glorious Overdose or w/e.
What exactly should I do? Do i need to root it first? Or something else?
Please give me a nice list of what exactly I need to do , and in what order.
Also any recommendations for what to instal.
Thank you.

antisouless said:
I recently sold my galaxy note for 400 but the kid only had 375 but gave me his sidekick as well.
And I want to know what i need to do in order to instal Glorious Overdose or w/e.
What exactly should I do? Do i need to root it first? Or something else?
Please give me a nice list of what exactly I need to do , and in what order.
Also any recommendations for what to instal.
Thank you.
Click to expand...
Click to collapse
You need root to install a custom ROM in all phones. This post might be helpful:
eMJaaay said:
Firstly you need root. Then you have to move a custom recovery to your phone's /system to allow you to install unsigned packages. You can do this using root explorer (paid app, but its the most simple and easy way of doing it) or you can do it using. You also need to have a custom recovery file, the update.zip which when you hit reinstall packages (given you pushed the custom recovery file to the phone's system) would bring up clockworkmod recovery. In clockworkmod recovery, there are many options, one of them being mounts and storages. Going on to that option will bring up your mounts and storages, where the most important one you need to check is SYSTEM which should always say UNMOUNT. If it says MOUNT SYSTEM, click on it and it should say UNMOUNT SYSTEM.
For ROOT, use SuperOneClick. You can download the file here -> link (scroll to the end of the post). I used version 2.2 and everything worked fine. Look at this guide by ayoteddy for more information -> link. You need to choose psneuter as your exploit. Windows detects this app as a virus so make sure all your anti-virus / firewall software is off. If it doesn't work, try and try again. Change USB cables and try some more!
Read the noob guide here -> link. Its REALLY good and gives you a step by step of how to root / get custom recovery and install custom ROM.
Go here -> link. For more in depth information about getting a custom recovery. And here -> link. for Krylon's recovery files (links on his thread aren't all working).
I recently rooted and got custom recovery and installed a fresh ROM (GOV 3.2) and all I can say is, be patient and follow everything step by step and you'll be fine. I'll also advise you to partition your SD card BEFORE installing a ROM just to be safe, because I've heard some people having issues with it. I did it and had no problem, but again I don't know if this is a placebo or actually helped. After installation / rebooting, etc ... don't touch your phone for a couple of minutes. If you reply in the appropriate threads, I'm sure someone will help you out if it doesn't work.
Click to expand...
Click to collapse

Ok I'm having a little trouble.
http://forum.xda-developers.com/showthread.php?t=1275116
I'm following this. I reached the part where i need to turn off my phone and go into recovery mode.
But when i choose to reinstall. It says E: signature verification failed .
Any help?

antisouless said:
Ok I'm having a little trouble.
http://forum.xda-developers.com/showthread.php?t=1275116
I'm following this. I reached the part where i need to turn off my phone and go into recovery mode.
But when i choose to reinstall. It says E: signature verification failed .
Any help?
Click to expand...
Click to collapse
Did you put the recovery in the system/bin?
And the update in the root of your SD?

antisouless said:
Ok I'm having a little trouble.
http://forum.xda-developers.com/showthread.php?t=1275116
I'm following this. I reached the part where i need to turn off my phone and go into recovery mode.
But when i choose to reinstall. It says E: signature verification failed .
Any help?
Click to expand...
Click to collapse
When it gives that message it usually means you haven't correctly pushed recovery to your /system. You can only push recovery after you have successfully rooted (get a free root checking app from the Play Store to check). Once you've rooted, you need to push the recovery file you get after you extract the recovery zip from the download links I've sent. You can move it from the root of your SD card to your phone using adb or root apps such as root explorer (very simple, but its a paid app). You also need to download the update.zip file from the link I sent (same place you downloaded the recovery file) and put it at the root of your SD card (don't unzip it). That should work!

Ok thanks . I'm going to try this now.

[Tutorial] Proscan PLT-7035-PL Root and install GAPPS

Rooting and installing Google Play on the Proscan PLT7035-PL ** UPDATED **
*** Disclaimer ***
I am not responsible for bricked tablets, voided warranties, crashed computers and/or global thermonuclear war! This is what worked for me if you are unsure of anything in the following steps STOP NOW! There is no factory rom released for this tablet. If you brick it your possibly stuck until if and when they release an update!
These instructions assume you are competent to do the folling: get files on and off of your device using the mass storage driver, able to edit and understand changes to inf files, use command prompt, edit system user files and have enough patence to read all of the steps without skipping any. There are a few gotcha's that if are skipped will leave you pulling your hair out. Also these instructions are written for Windows. If your using Linux you shouldn't need my help anyways ..​
Click to expand...
Click to collapse
This tutorial may also work on other Chinese generic tablets. You would only need get the hardware vendor and product ID's from the device info for step 2. For the purpose of this post I wont be getting into that but the information is out there.. GOOGLE IS YOUR FRIEND
Introduction
Its likely if you are reading you have recently visited Big Lots and scored a $69 7" tablet. Only to get home and find virtually NO information on rooting it or installing Google Play or GAPPs. I know I was in that boat but after a few hours of messing around I got it. I am writing this to hopefully help the hundreds of others I see out there asking for help on this.
Step 1 Download Stuff (Things to round up before you even think about starting)
Root with Restore by Bin4ry v15 - http://forum.xda-developers.com/showthread.php?t=1886460 .** UPDATE ** I attached the version I used to this post
ADB Drivers - You have several options here, milage may very.** UPDATE ** I attached USB drivers to this post. I had to seperate the 64 and 32 bit drivers to get the files under the 8 mb limit for uploads
install android SDK http://dl.google.com/android/android-sdk_r21-windows.zip and follow instructions to get the google usb drivers. Search XDA there are several guides, I couldn't find the one I used as of writing this article but there are many out there.
Search google and find a zip with just the ADB drivers.
Download Super One Click Root and use the drivers in the tools directory of the zip. http://forum.xda-developers.com/showthread.php?t=803682
Root Explorer - quick way to move and remount file systems rw with ease. I used v2.13.1. Google around and find an APK to install, just be careful there is another completely differnent package out there called "rooted explorer" it may work but I have not tried it. ** UPDATE ** I attached the version I used to this post
Google Apps for ICS - gapps-ics-20120429-signed.zip is what I used from http://goo.im/gapps/gapps-ics-20120429-signed.zip ** Update ** I replaced the URL with a direct download link from goo.im enjoy!
**NOTE** SUPER ONE CLICK ROOT WILL NOT ROOT YOUR TABLET SO DON'T BOTHER TRYING!
Step 2 install and configure your ADB USB Drivers (Let the fun begin)
Extract your zip file containing the ADB USB drivers or Install the Android SDK and follow instructions on how to use the SDK manager to download the lastest drivers from google.
Once downloaded edit the inf file (usually named android_winusb.inf)
Add the following under the [Google.NTx86] heading and again under the [Google.NTamd64] heading: (one is for 32bit systems and the other is for 64 bit Systems)
Code:
;ProScan plt-7035
%SingleAdbInterface% = USB_Install, USB\VID_2207&PID_0010
%CompositeAdbInterface% = USB_Install, USB\VID_2207&PID_0010&REV_0222&MI_01
After saving and exiting. Turn on USB Debugging on your tablet. It is under Settings => Developer Options and is the first option at the top make sure it has a check in the checkbox. Exit the developer screen by pressing back or the home key and plug in your tablet to a usb port on your computer using a micro-USB cable.
Device detection should at this point detect a few devices but at least 1 will fail without drivers. Possibly more on XP systems..
Under Device Manager => Other Devices you should have a device called "PLT7035-PL" use the usb drivers modifed above to install the ADB USB Drivers.
*** Important Note ***
At this point even with the ADB Driver installed ADB will not see the tablet. We have to create or edit the file c:\users\whatever your username is\.android\adb_usb.ini
If you have already run ADB at any time on your system the file and directory should already exist. If not you will need to create the directory and the file.
on a single line simply add this to a blank line in the file and save and exit:
0x2207
This tells ADB to look for that vendor code. (if you allready have ADB on your computer 'adb devices' should now show your tablet.
** UPDATE ** This is still necessary even if using the drivers attached to this post!​
Click to expand...
Click to collapse
Step 3 Root your Tablet!
*** Warning ***
I almost bricked my tablet on this step due to an error with a faulty PlayStore I had tried to install just using the APK. It kept the tablet from rebooting properly during the root process! I recommend erasing all user data before continuing YOU HAVE BEEN WARNED!
Click to expand...
Click to collapse
Extract Root with Restore by Bin4ry v15 to the directory of your choosing.
From explorer on your pc double click the RunMe.bat and select option one.
This particular root uses the system restore function to gain root access. If everything goes right you should get a prompt on the table to restore an image.
Click to expand...
Click to collapse
Press restore ON THE TABLET without entering a password or changing anything else and after a minute or two (maybe more) it should reboot.. Do some more stuff then reboot one more time and you should now have a rooted tablet.
Step 4 Copy root explorer and gapps-ics-20120429-signed.zip to the internal storage of the tablet.
Make sure the tablet is plugged into your computer and turn On USB Storage.
Copy rootexplorer.apk and gapps-ics-20120429-signed.zip to the Downloads folder via windows explorer and the removeable drive from the tablet.
Step 5 Install root explorer
ON THE TABLET: to applications => explorer => Internal memory => Download => rootexplorer.apk
This should bring up the apk installer and ask for permission to install rootexplorer. Follow the prompts until rootexplorer is installed.
Open root explorer. The first time you open it if everything is right you should get a prompt from SU to allow root access, hit grant. After that you might get a message that you need to close and reopen root explorer again, this is completely normal.
Step 6 Remount File Systems r/w
Once root explorer is open and has root access you should be in the root directory of the device.At the top you should see a message that says "Mounted as r/o" and a button to the right of it that says "mount as r/w".
Click to expand...
Click to collapse
Click the button to mount / as rw.
The message at the top should change to "mounted as r/w" and the button should change to "mount as r/o"
Click to expand...
Click to collapse
Scroll to the system folder and open it.
At the top you should see a message that says "Mounted as r/o" and a button to the right of it that says "mount as r/w".
Click to expand...
Click to collapse
Click the button to mount /system as rw.
The message at the top should change to "mounted as r/w" and the button should change to "mount as r/o"
Click to expand...
Click to collapse
Now click on the ../ Parent Folder icon on the top to go back to the root directory,
Step 7 Extract GAPPS
Scroll to and tap sdcard
Scroll to and tap Download
You should see the google apps file we copied earlier.
Click to expand...
Click to collapse
tap and hold on gapps-ics-20120429-signed.zip until the menu comes up and select "extract all" this will extract the zip file to /sdcard/extracted/gapps-ics-20120429-signed/
Step 8 Copy Google APPS to /system
Scroll to and TAP .. Parent folder at the top to go back a directory to /sdcard/
Scroll to and TAP extracted
Scroll to and TAP gapps-ics-20120429-signed
You should see 5 items, install-optional.sh, META-INF, optional, system and the ../ Parent Folder link.
Click to expand...
Click to collapse
*** WARNING *** Do not click on the install-optional.sh bad things might happen!
Click to expand...
Click to collapse
TAP and hold on the system folder until the menu comes up and select copy.
This will place a paste button on the bottom of the screen be careful not to hit it yet or you will have problems.
Click to expand...
Click to collapse
TAP ../ Parent Folder until the directory at the top says / (you should have to go back 2 or 3 folders)
You should now see a bunch of folders in the root directory as well as the tablets system folder. There should NOT be a ".. Parent folder" visible.
Click to expand...
Click to collapse
Now hit the paste button on the bottom left. You should get a warning massage saying "system already exist. Do you want to overwrite it?" hit yes
The file copy takes 1 to 2 minutes when it is done all that is left is to remount the / and /system folders r/o and reboot the tablet
Click to expand...
Click to collapse
Step 9 Remount file systems r/o
At the top you should see a message that says "Mounted as r/w" and a button to the right of it that says "mount as r/o".
Click to expand...
Click to collapse
Click the button to mount / as ro.
The message at the top should change to "mounted as r/o" and the button should change to "mount as r/w"
Click to expand...
Click to collapse
Scroll to and TAP system
At the top you should see a message that says "Mounted as r/w" and a button to the right of it that says "mount as r/o".
Click to expand...
Click to collapse
Click the button to mount /system as ro.
click the back icon on the bottom left until you have exited root explorer.
Press the power button on the top of the tablet and turn it off and back on.
If everything went right you should now have a fully functioning rooted tablet with Google Playstore...
Click to expand...
Click to collapse
WASN'T THAT FUN!!?!?!

Ive tried this several times. It hasn't worked yet. Maybe I am doing it wrong, not sure. Ill keep trying but I am losing hope.
I am trying with a Proscan PLT7035-PL

worked ... Many thanks to amjtech ...
Here's how to do it:
Install Android SDK, then install Android SDK Tools, Android SDK Platform-Tools, Google USB Driver (download from google)
Install PdaNet for Android on PC.
Attach Proscan pad, check Settings->Developer options->USB debugging to on
XP install adb driver - if unsuccessful, need modify registry
regedit under HKLM/SYSTEM Permissions -> Advance, check replace permission entries on all child
(http://www.tomshardware.com/forum/252428-45-installation-failed-access-denied)
Install USBDeview, run to see usb device attached, get device ID of PROSCAN pad (0x2207)
Add device ID to file adb_usb.ini in c:\docume~1\<user>\.android, also add google's id:
0x2207
0x18d1
(http://forum.xda-developers.com/showthread.php?t=1479311)
(http://androidforums.com/kindle-fir...k-how-get-adb-running-root-superoneclick.html)
Now device will show running
Install ICS Root Unlocker 1.0, run ... got rooted.
Download Root Explorer (2.21.1).apk, Google Play Store (3.8.16).apk, and gapps-ics-20120429-signed.zip from 4shared
http://www.4shared.com/folder/k86VyEKK/_online.html
follow the rest of the instruction (http://forum.xda-developers.com/showthread.php?t=1993013)
... reboot proscan ... voila !!!

Help me!! please!!
I pushed the reset button then right now it's stay at recovery mode ever and I don't what firmware name it's using.. Someone help me find the link to download firmware and teach me how to restore it!! thanks very, very much!!

Factory ROM
tnan0906 said:
I pushed the reset button then right now it's stay at recovery mode ever and I don't what firmware name it's using.. Someone help me find the link to download firmware and teach me how to restore it!! thanks very, very much!!
Click to expand...
Click to collapse
Unfortunately as stated above there is no factory rom available for these tablets yet... I am looking into using rkflash or rkflashtool to download my rom prerooted so I have a backup and also can post a rooted rom for everyone. Most likely later this week I should have some time to figure out the rkflashtool and get it dumped.
I will post it here once it is done.
I'm going to say this now. I have a very busy schedule so I cannot guarantee when I will get this accomplished.
Also if this works for you please hit the thanks button.

Stuck
Humphrey1989 said:
Ive tried this several times. It hasn't worked yet. Maybe I am doing it wrong, not sure. Ill keep trying but I am losing hope.
I am trying with a Proscan PLT7035-PL
Click to expand...
Click to collapse
How far are you getting? Were you able to get root?

Rom Backup
amjtech said:
Unfortunately as stated above there is no factory rom available for these tablets yet... I am looking into using rkflash or rkflashtool to download my rom prerooted so I have a backup and also can post a rooted rom for everyone. Most likely later this week I should have some time to figure out the rkflashtool and get it dumped.
I will post it here once it is done.
I'm going to say this now. I have a very busy schedule so I cannot guarantee when I will get this accomplished.
Also if this works for you please hit the thanks button.
Click to expand...
Click to collapse
Thanks thanks thanks!! Please upload your backup from you for me! I think it will work because same products!! please as soon as possible!! Thanks you, thanks you very very much!!!

Confused as heck !!
OK, I am confused as heck here. I have the SDK installed. I have the USB Drivers installed. The PC sees the phone just fine, I can browse the internal storage and the external sd card with no problem. Windows XP Device Manager shows Android Phone, and under that the Android Composite ADB Interface.
PDANet works with the phone, no problem. However, adb devices never shows the device, and the Root program cannot find it either. At this point, I'm stumped. Any ideas what I need to do? I have put the android_usb.ini file in c:\Documents and Settings\myusername\Android with the necessary hex codes for the device and for Google. I'm going nuts here!
I know ADB is installed properly, because I can plug my phone into the PC and run adb devices, and it's detected just fine. It's just this tablet it can't find.
FIX: Not as obvious as it might have been, but here is the solution to my problem. I used the Search function to find the adb_usb.inf file - umm... it's in .android, not android. Once I added those ids, everything was fine.

No Market?
Achieved root, copied over the system folder from the zip, but no market. Did I miss something?

What about Recovery?
Just wondering if there is a recovery option as yet? That would be so helpful!
---------- Post added at 08:13 AM ---------- Previous post was at 07:28 AM ----------
spycom773469 said:
Achieved root, copied over the system folder from the zip, but no market. Did I miss something?
Click to expand...
Click to collapse
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.

Good instructions! But failure... and then success
The instructions were great above! The pointer to the version of google play was bad, but I found this link http://forum.xda-developers.com/showthread.php?t=1934441 and after using Root explorer to do the appropriate permissions at / and /system, and on the renamed file, it works!
---------- Post added at 06:17 AM ---------- Previous post was at 06:06 AM ----------
Now that I got Google Play to work...
I am having an odd problem however - the installation of apps stalls at 0% for about 30 seconds, and then continues. And as the percentage is updated, I see app screens cycling. And little google play shopping bags start to stack up in my "task tray" area of the tablet.
Does anybody else have that problem? It's very annoying! It seems like the downloaded apps not only install but open, eating up precious memory.
Speaking of which, how is the flash memory used? (4 GB), and not having apps take up the 500 MB that's available?

jmasters said:
Speaking of which, how is the flash memory used? (4 GB), and not having apps take up the 500 MB that's available?
Click to expand...
Click to collapse
It is 4GB shared. I haven't tried looking at the partition table.
There is only 2GB usable, it's on the TF card, I moved the apps there.
Not sure how to access the SD card to put apps there.
netizenmt said:
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.
Click to expand...
Click to collapse
My GAPPS are working fine. I thought about killing that /system/system folder and manually placing the files via adb.
Try checking the permissions too, I think they need to be 644 or better.
I've put the Tablet away for now, I will tinker again later probably.
Sent from my DIRTY Jelly Bean EVO 3D

How to move apps internally to TF card?
spycom773469 said:
It is 4GB shared. I haven't tried looking at the partition table.
There is only 2GB usable, it's on the TF card, I moved the apps there.
Not sure how to access the SD card to put apps there.
How do you move your apps there? I'm aware of the app called something like app2SD, but the TF card isn't an SD card.
Click to expand...
Click to collapse

jmasters said:
spycom773469 said:
How do you move your apps there? I'm aware of the app called something like app2SD, but the TF card isn't an SD card.
Click to expand...
Click to collapse
If you go to the Apps tab under the system settings you will see a button that says "Move to TF Card"
Sent from my DIRTY Jelly Bean EVO 3D
Click to expand...
Click to collapse

netizenmt said:
Just wondering if there is a recovery option as yet? That would be so helpful!
---------- Post added at 08:13 AM ---------- Previous post was at 07:28 AM ----------
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.
Click to expand...
Click to collapse
You have to extract the zip file, remount the file systems as rw and copy the /system folder from the zip into the / of the device so that all the files goto their proper places... if you have /system/system it was not copied correctly...
as far as those not getting ADB to reconize the tablet.. a) make sure you have usb debugging turned on and b) you put the hardware id in the adb_usb.ini file.. See the ** important note ** in Step 2!

Unzipping Files
I have read and followed your directions to download the files, but, my unit keeps saying it can not open any zip files.
Do you have any idea why it may say this or how to get around this problem so I can continue as instructed?

unzip on your computer and transfer over, or use root explorer
bluetxsteel said:
I have read and followed your directions to download the files, but, my unit keeps saying it can not open any zip files.
Do you have any idea why it may say this or how to get around this problem so I can continue as instructed?
Click to expand...
Click to collapse
You can unzip them on your computer and then transfer them over, or use root explorer on your tablet. You'll have to hold your finger on the .zip file for a few seconds and then the unzip option pops up.

Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.

my bricked too
netizenmt said:
Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.
Click to expand...
Click to collapse
I hope you do so or some body find a way to unbrick this thing as for me i still have 26 days to return mine.i got to the part where I was about to paste the system I hit yes then everything locked up. I noticed before I hit yes it said do you want to merge and copy the files over not do you want to overwrite it but I still hit yes bad idea. can anybody tell me why I said merge and copy. well this is the second one I have bricks follow the steps perfect got all the way to the end and this is what happens so I took the first 1 back guess I'm going to take a second back also and try again until i figure out what I'm doing wrong.has anybody maked a rkimage or a .zip. update that will work to re cover this thing. I would be willing to try it out for you because I can.

netizenmt said:
Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.
Click to expand...
Click to collapse
try doing an ADB shell
then the following commands
su
wipe data
this will reset the user partition. I had something similar happen on mine.. BTW 'wipe all' will definitly brick your tablet so be carefull
If you still cannot get it I was almost in a car accident yesterday and my tablet went flying and broke the screen... If you confident with a soldering iron I now have a plt-7035 mainboard prerooted and playstore installed for sale for $25 including shipping.. it would involve soldering 6 wire and the wifi antenna if your up to it pm me,, I know its good as I was able to ADB into it and run su and wipe data to reset it..
-Andrew

[TUT][ROOT+CWM+GAPPS]InFocus M512 Root, CWM and GApps tutorial.

So there is a bargain chinese 4G phone called the 'InFocus M512'.
The problem with it is that it comes without Google Apps and also is not rooted (sometimes is). Also it does not have CWM Recovery.
So this quick tutorial shows you how to root, install CWM Recovery and install google apps on the M512.
I'm not responsible for any damage
Rooting:
Method 1
1.Go to settings>>Security>>Check Unknown Sources tap OK.
2.Download this file.
3.Install
4.Run and tap 'get root' or somthing like that.
5.Delete KingRoot and some chinese app, but DO NOT DELETE KingUser!
6.Done!
Method 2
Flash CWM Recovery using the 2nd method from this post. If you have rooted usign the first method use method 1 from that post.
Download UPDATE-SuperSU-x.xx.zip (i used 2.46)
Reboot into CWM.
Select Install zip>choose zip from /sdcard>select UPDATE-SuperSU-x.xx.zip, press power button
Reboot now
GApps
1.Download this zip file
2.Reboot into CWM.
3.Select Install zip>choose zip from /sdcard>select the file, press power button
4.Reboot now.
How to delete KingUser (only if you have SuperSU and it is working)
Download ES File explorer, enable root explorer, go to /system/app and delete KingUser.
So this is how to get root, cwm and gapps on the m512.

First Method no good for me
I put the kingroot file in the adb tools folder and used the install command. It wasn't clear from the above whether the phone needed to be in recovery or some other mode so I tried a few times, in recovery mode and again just connected as an mtp device in the normal way. Either way the result was the same, it said "Invalid APK File: KingRoot.......".
I will have a go at the CWM thing next.
I am still on the 103A ROM that the phone came to me with - I have been trying, on and off, without success to update and then root it , for months.
When trying to flash an update ROM it tells me that the update package has unexpected contents and the there is an error in the update file and then says "Status 7". You can read all about my lack of success on this forum under the threads M512 started by Galaxy Why.

I'm trying, I really am....
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Your instructions in normal my comments in italics.
Method 2: (No root)
1.Connect your phone via USB to your PC. OK
2.Enable MTP. OK
3.Enable USB Debugging. Settings>Developer Options> tick USB Debugging. OK
4.On your computer, 2 drives will appear: One of them is a CD-Rom which contains all drivers. OK
5.Click on that CD-Rom and it will install all drivers. It doesn't, or it may do, but what it definately does is asks me to put a disc in the drive and tries to do some kind of dir_all in windows explorer - I would post a screenshot here but this page only allows URL's- and I'm not sure how to go about that.. but I think I've managed to upload a screenshot....
After waiting for 5 minutes or so to see if something would happen as the green progress bar ground to a halt but the busy circle continued I hit the cancel button on the "please insert a disc dialogue" and then ploughed on anyway ....
6.Plug phone in again. Now this had me confused, I assume you mean unplug AND THEN plug the phone in again.
7.Download the .ZIP file and extract it somewhere. Which/what zip file do you mean exactly?? I couldn't get past this.
8.Click on _install_cwm_6.0.5.1.cmd
9.Your phone will ask you something, just tick "always allow from this computer" and hit OK.
10.Your phone will reboot into DL Mode, then it will reboot again.
11.Recovery is installed.
It's late and I'm tiring so sorry if missed something obvious. Any advice?

androo235 said:
Let me start by saying thanks for making the effort to post what you know and so to help people like me, however.
I tried to follow the method 2 (as I don't have root) from your other post (the one linked to above with the words "the 2nd method from this post" but got stuck.
Click to expand...
Click to collapse
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.

PochiMak said:
Looks like you don't have a adb driver
And... why do you want to root your phone? Installing CWM is not root required.
M512 comes with a unlocked bootloader, just boot into bootloader and you can flash anything you like.
I made a customized stock rom based on version 2280, bloatwares removed and Google Play framework included. (You can download the apps back from Play Store, if you needs those)
Now the phone has 2.09GB free spaces :victory:
If you were interested on it, I can upload it and give you a link.
Click to expand...
Click to collapse
I am interested in the custom rom you made for this phone. There's so little info on this model.

Lorien_Silmaril said:
I am interested in the custom rom you made for this phone. There's so little info on this model.
Click to expand...
Click to collapse
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.

PochiMak said:
https://copy.com/3IfoZUCTCna1wa3U
The calendar is not working, you can install Google calendar from Play Store.
Click to expand...
Click to collapse
How do I install this?

GalaxyWhy said:
How do I install this?
Click to expand...
Click to collapse
Flash this ROM by a "3rd party recovery" = CWM

I just wonder how many of you are still using this device?

PochiMak said:
I just wonder how many of you are still using this device?
Click to expand...
Click to collapse
Just me, I think.
Can you give another link to your ROM, please, the one you put days ago doesn't works.
Thank you.

it's works for me. thx~