anyone find any good ones? feel free to share them here.
WARNING: PLEASE BE VERY CAREFUL, TOUCHING A FEW WRONG THINGS COULD LEAVE YOU IN AN UNUSEABLE STATE!
found this at lowyat.net
This is secret code on Samsung Android phone. With this secret code you can access hidden phone information.*#*#4636#*#* Phone Information
*2767*3855# Hard Reset*
*#*#7780#*#* Factory Reset**
*#*#7594#*#* Change End Call/Power Option
*#*#197328640#*#* Service Mode
*#*#273283*255*663282*#*#* File Copy Screen (Backup Media Files)
*#*#526#*#* WLAN Test
*#*#232338#*#* Shows WiFi MAC address
*#*#1472365#*#* GPS Test
*#*#1575#*#* Another GPS test
*#*#232331#*#* Bluetooth test
*#*#232337#*# Shows Bluetooth device address
*#*#8255#*#* GTalk Service Monitor
Codes to launch various Factory Tests:
*#*#0283#*#* Packet Loopback
*#*#0*#*#* LCD test
*#*#0673#*#* Melody test
*#*#0842#*#* Device test (Vibration test and BackLight test)
*#*#2663#*#* Touch screen version
*#*#2664#*#* Touch screen test
*#*#0588#*#* Proximity sensor test
*#*#3264#*#* RAM version
Codes to get Firmware version information:
*#*#4986*2650468#*#* PDA, Phone, H/W, RFCallDate
*#*#1234#*#* PDA and Phone
*#*#1111#*#* FTA SW Version
*#*#2222#*#* FTA HW Version
*#*#44336#*#* PDA, Phone, CSC, Build Time, Changelist number
Note :
* Hard Reset to remove all files and settings in internal memory, or equal to reformat the firmware
* Warning! when it is direct push hard reset, there is no cancel option
* Factory Reset just delete the account, system & application settings
well, just having a peek around today. experimenting with any cut (allows you to add custom "actvities" not usually available on device), found a factory mode (factory.apk),
see screenshot with calculator (&*#). People in the Tab 10.1 forums were somehow had this on their tabs and it was unuseable. So extracted and the apk and sure enough found the .smali with all the codes. Eventhandler.smali had them, it has two version, the normal *#*#,#*#* android_secret_codes and has this: const-string v2, "(+197328640+", Ive tried inputting: (+197328640 then pressing equals key, it says wrong fromat. All of the *#*# codes work just like they would in the dialer.
Ive actually found a few more codes, my other screen capture is of a serial number screen which list my device as GT-P1010 (1st gen tab). Probably just what they told the FCC it was to avoid hassle.
I also found some other cool codes, one for RLZ Google partner setup and Phone Util, set USB to PDA or Modem.
I DO NOT recommend anyone try this. It would be fairly easy to do serious damage to your device.
these codes worked for me, Im sure theres more : http://www.android-hilfe.de/samsung-galaxy-w-i8150-forum/185540-testprogramme.html
and I can pastebin a copy of the .smali files with the codes if anyone IS interested.
What exactly am I looking for? nothing, just snooping.
Related
I thought this could be helpful, I found it here http://www.askvg.com/google-android-hidden-secret-codes/
..........FYI These codes have been obtained by decoding various .apk files present in the phone firmware.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.............
we have the full list on the wiki
You can also run SamServMode (market) if you don't feel like memorizing them all..
Very nice, thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
hey the power button switching code didnt work on my samsung galaxy s2 I9100..could u help me.
DISCLAIMER: This information is intended for experienced users. It is not intended for basic users, hackers, or mobile thieves. Please do not try any of following methods if you are not familiar with mobile phones. We'll not be responsible for the use or misuse of this information, including loss of data or hardware damage. So use it at your own risk.
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
Credits from sachin kundu
its useful SGS secret code from market.
good job !!!
Hmm instead of typing these codes we can use sgs tools application for market
Sent from my GT-I9003 using XDA Premium App
kkrraazzyy said:
Hmm instead of typing these codes we can use sgs tools application for market
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
Yup but i'm just giving out these codes to the members which dont know about the app on the market. x)
Sent from my GT-I9003
Hmm then its gud to have some basic knowledge
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
*2767*3855#
Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service center to reinstall camera firmware.
*#*#7594#*#*
This one is my favorite one. This code can be used to change the "End Call / Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use "Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.
Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
NOTE: All above codes have been checked on Google Android phone Samsung Galaxy I7500 only but they should also work in other Google Android phones.
Hi Guys Today I will Share a very Use
full Hidden Secret Codes for All
Android Devices.
*#*#4636#*#*
This code can be used to get some
interesting information about your
phone and battery. It shows following
4 menus on screen:
o Phone information
o Battery information
o Battery history
o Usage statistics
*#*#7780#*#*
This code can be used for a factory
data reset. It'll remove following
things:
o Google account settings stored in
your phone
o System and application data and
settings
o Downloaded applications
It'll NOT remove:
o Current system software and
bundled applications
o SD card files e.g. photos, music files,
etc.
*2767*3855#
Think before you give this code. This
code is used for factory format. It'll
remove all files and settings including
the internal memory storage. It'll also
reinstall the phone firmware.
*#*#34971539#*#*
This code is used to get information
about phone camera. It shows
following 4 menus:
o Update camera firmware in image
(Don't try this option)
o Update camera firmware in SD card
o Get camera firmware version
o Get firmware update count
*#*#7594#*#*
This one is my favorite one. This code
can be used to change the "End Call /
Power" button action in your phone.
Be default, if you long press the button,
it shows a screen asking you to select
any option from Silent mode, Airplane
mode and Power off.
You can change this action using this
code. You can enable direct power off
on this button so you don't need to
waste your time in selecting the
option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen
where you can backup your media files
e.g. Images, Sound, Video and Voice
memo
*#*#197328640#*#*
This code can be used to enter into
Service mode. You can run various
tests and change settings in the service
mode.
*#*#232339#*#* OR *#*#526#*#* OR
*#*#528#*#*
WLAN test (Use "Menu" button to start
various tests)
*#*#232338#*#* - Shows WiFi MAC
address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth
device address
*#*#8255#*#* - This code can be used
to launch GTalk Service Monitor.
Codes to get Firmware version
information:
*#*#4986*2650468#*#* - PDA, Phone,
H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC,
Build Time, Changelist number
Codes to launch various Factory
Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* -
Melody test
*#*#0842#*#* - Device test (Vibration
test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
Please hit thanks button it encourages me :thumbup:
Sent from my HTC Explorer A310e
Re: Hidden Secret Codes for<br>All Android Devices
Saumitra Yadav said:
Hi Guys Today I will Share a very Use
full Hidden Secret Codes for All
Android Devices.
*#*#4636#*#*
This code can be used to get some
interesting information about your
phone and battery. It shows following
4 menus on screen:
o Phone information
o Battery information
o Battery history
o Usage statistics
*#*#7780#*#*
This code can be used for a factory
data reset. It'll remove following
things:
o Google account settings stored in
your phone
o System and application data and
settings
o Downloaded applications
It'll NOT remove:
o Current system software and
bundled applications
o SD card files e.g. photos, music files,
etc.
*2767*3855#
Think before you give this code. This
code is used for factory format. It'll
remove all files and settings including
the internal memory storage. It'll also
reinstall the phone firmware.
*#*#34971539#*#*
This code is used to get information
about phone camera. It shows
following 4 menus:
o Update camera firmware in image
(Don't try this option)
o Update camera firmware in SD card
o Get camera firmware version
o Get firmware update count
*#*#7594#*#*
This one is my favorite one. This code
can be used to change the "End Call /
Power" button action in your phone.
Be default, if you long press the button,
it shows a screen asking you to select
any option from Silent mode, Airplane
mode and Power off.
You can change this action using this
code. You can enable direct power off
on this button so you don't need to
waste your time in selecting the
option.
*#*#273283*255*663282*#*#*
This code opens a File copy screen
where you can backup your media files
e.g. Images, Sound, Video and Voice
memo
*#*#197328640#*#*
This code can be used to enter into
Service mode. You can run various
tests and change settings in the service
mode.
*#*#232339#*#* OR *#*#526#*#* OR
*#*#528#*#*
WLAN test (Use "Menu" button to start
various tests)
*#*#232338#*#* - Shows WiFi MAC
address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth
device address
*#*#8255#*#* - This code can be used
to launch GTalk Service Monitor.
Codes to get Firmware version
information:
*#*#4986*2650468#*#* - PDA, Phone,
H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC,
Build Time, Changelist number
Codes to launch various Factory
Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* -
Melody test
*#*#0842#*#* - Device test (Vibration
test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
Please hit thanks button it encourages me :thumbup:
Sent from my HTC Explorer A310e
Click to expand...
Click to collapse
Many of the codes don't work -_-
I'm on stock Rom BTW
via HTC Sense
Re: Hidden Secret Codes for<br>All Android Devices
Blue3125 said:
Many of the codes don't work -_-
I'm on stock Rom BTW
via HTC Sense
Click to expand...
Click to collapse
Which of them????
Sent from my HTC Explorer A310e
not working all codes on my SONY XPERIA U except *#*#4636#*#*
Anything to format those damn SIM's? I have an unactivated one with undeletable voicemail (force stopping Phone works only until reboot). Factory Reset from Settings didn't work, not willing to try that again. Only inserted it to get rid of "No SIM Inserted" notification, which is apparently harder to remove. I also remember getting access to more free games with it in for some reason.
Damn !! not even a single crap is working on mah droid razr ... come up with somthing new .thx in advance
Sent from my XT910 using Tapatalk 2
Lg rebel 4 secret codes wont work
I have a lg rebel 4. 8.1.0 oreo. The phone carrier is straight talk. I've searched Google up and down and haven't found a single secret code that would work. Does any1 know any that will work? Like the basic androids codes are no good like *#06# IMEI info code doesn't work and is suposed to be universal
---------- Post added at 02:30 PM ---------- Previous post was at 02:25 PM ----------
I have a lg rebel 4. 8.1.0 oreo. The phone carrier is straight talk. I've searched Google up and down and haven't found a single secret code that would work. Does any1 know any that will work? Like the basic androids codes are no good like *#06# IMEI info code doesn't work and is suposed to be universal
SECRET CODES FOR ANDROID
-------------------------------------------------
1. Complete Information about your Phone
*#*#4636#*#*
This code can be used to get some interesting information about your phone and battery. It shows following 4 menus on screen:
Phone information
Battery information
Battery history
Usage statistics
2. Factory data reset
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:Current system software and bundled application
SD card files e.g. photos, music files, etc.
Note: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation.
3. Format Android Phone
*2767*3855#Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
Note: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone. So think twice before giving this code.
4. Phone Camera Update
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
WARNING: Never use the first option otherwise your phone camera will stop working and you'll need to take your phone to service centre to reinstall camera firmware.
5. End Call/Power
*#*#7594#*#*
This one is my favourite one. This code can be used to change the "End Call /Power" button action in your phone. Be default, if you long press the button, it shows a screen asking you to select any option from Silent mode, AirPlane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you don't need to waste your time in selecting the option.
6. File Copy for Creating Backup
*#*#273283*255*663282*#*#*
This code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
7. Service Mode
*#*#197328640#*#*
This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
8. WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use
"Menu" button to start various tests)
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
9. Codes to get Firmware version information:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
10. Codes to launch various Factory Tests:
*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* OR *#*#0289#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version
Try these codes on Ur Own Risk.