Hi Guys & Gals,
I am having a problem getting my Desire to mount the SD Card to a PC recently. This happened with ShadowHawk v21 and it is happening with Endymion v3.0. I have put MIUI on there and it works fine, so I know the hardware is still good.
I don't get any option to mount the card as USB storage from the phone when I connect it to the PC at all.
Any ideas - am I doing something stupid or is this a 'feature' of the newer Sense ROMs?
Thanks in advance for your help,
Simon
If you have 4EXT Recovery, try to mount it from recovery, there is an option to mount usb storage. Maybe thats a way to go?
Thanks for the suggestion, but if I am doing that then I may as well just put the SD-Card into my USB adapter and connect it direct to my PC.
It just seems to me that this has only been an issue on the more recent Sense ROMs, so I was wondering if it was a known problem or not.
Okay, did not know you had an adapter ;p
But if its working it can be good to know for others facing the same problem, so you may try it out anyways
Same Problem
I have the same problem. Since upgrading to Endymion v3.0. Didn't have this problem in Endymion v2.2 or v2.1 or any other ROM.
Have you managed to fix it?
Unfortunately not mate. I stuck CyanogemMon & MIUI back on and they both work correctly with the USB connected for mounting the SD card, but the newer Sense ROMs don't seem to work correctly with this. I assume it must just be a few of us that suff3r from this - if it affected everybody then I think there would be more of an uproar
Maybe you should ask on the Endymion thread. I can't post in any development threads until I have 10 posts...
Sent from my HTC Desire S using XDA App
Finally got round to doing that. Got a reply from 'enigmaamit' with the following;-
I don't know why you're getting that problem mate. I've been on Endymion through all it's versions since the very beginning, and USB access has worked just fine on all of them. The PC always recognizes my phone as a mass storage device when i want it to.
That said, there is a small bug that USB disconnects when you pull down the notification drawer while connected as USB storage. However, there is a workaround that works beautifully and consistently for me as described below:
Here's my set-up in case it helps:
Disable the feature that asks you whether to connect as "Charge only" or "USB Mass storage" and set it to Charge only by default.
Then, whenever you connect to PC via USB cable, just pull down the notification drawer and select USB mode when you want to transfer files.
However, while connected, if you pull down the notification drawer, the USB often disconnects.
I've found that if you go to RCMIX tweaks and select "Default Quicksettings", under Notification settings, that problem disappears, and the USB doesn't disconnect anymore, even when you pull the notification drawer.
Click to expand...
Click to collapse
Works perfectly - hopefully this will help you other guys with the same problem.
Simon.TS.HTC said:
Finally got round to doing that. Got a reply from 'enigmaamit' with the following;-
Works perfectly - hopefully this will help you other guys with the same problem.
Click to expand...
Click to collapse
Nice of you to spread the word. I'm sure more people will benefit from this post.
As you have most probably learnt by experience, it's always a good idea to post ROM specific queries on the ROM thread itself. Answers are more forthcoming from a community already on that ROM. And Endymion has a great support framework, with active, enthusiastic users and a gem of a man as a developer (Lowveld).
I've never seen a query that has gone un-discussed or un-solved over there yet. I'm glad you've joined the Endymion family.
For those that haven't, i invite you to come on over and have a go, we have cookies!!
Thanks for the tip! I'll definitely try it out...
Sent from my HTC Desire S using XDA App
Something is very wrong with this.
I had Endymion 3.0 and after realizing that I don't like it... Got back to Cyanogen(full wipe) and my USB mass storage connection doesn't work anymore at all, there isn't an notification/option to change it to anything from charge only, usb tethering says usb not connected. Not in bootloader, recovery, rom. Tried several SD cards, second usb cable, couple of computers, older Cyanogen builds. Nothing.
How to get back stock rom, no recovery and s-on without USB so I can send it for repair?
rasputyn said:
Something is very wrong with this.
I had Endymion 3.0 and after realizing that I don't like it... Got back to Cyanogen(full wipe) and my USB mass storage connection doesn't work anymore at all, there isn't an notification/option to change it to anything from charge only, usb tethering says usb not connected. Not in bootloader, recovery, rom. Tried several SD cards, second usb cable, couple of computers, older Cyanogen builds. Nothing.
How to get back stock rom, no recovery and s-on without USB so I can send it for repair?
Click to expand...
Click to collapse
Check this post. Probably has what your looking for...
http://forum.xda-developers.com/showthread.php?t=1146601
rasputyn said:
Something is very wrong with this.
I had Endymion 3.0 and after realizing that I don't like it... Got back to Cyanogen(full wipe) and my USB mass storage connection doesn't work anymore at all, there isn't an notification/option to change it to anything from charge only, usb tethering says usb not connected. Not in bootloader, recovery, rom. Tried several SD cards, second usb cable, couple of computers, older Cyanogen builds. Nothing.
How to get back stock rom, no recovery and s-on without USB so I can send it for repair?
Click to expand...
Click to collapse
I have the exact same problem with the virtuous quattro ics rom. Please help
Have you tried the steps I posted in the solution on page 1 of this thread?
Tried all the listed steps, still it doesn't mount.
Sent from my HTC Desire S using XDA App
Related
Is there anyway to restore a Captivate to 100% stock without a USB connection? Ie, load something on to an external sd cards to restore?
I've used ODIN plenty of times, but somehow I've lost my USB connection for anything other than charging the phone (USB Device Not Recognized).
Thanks...
Nope, Odin has to be done via USB, the closest thing out there is Redbend, but ATM people have only put together packages for flashing the kernel, not the whole phone
What about drivers?
Have you tried updating the drivers or installing them?
Crap!
I guess I have to continue trying to get my USB connection to work.
I'm worried that my problem might be hardware on the phone, and without reverting to stock, I won't be able to return it!
Any ideas for the USB problem? I'm using the correct (ODIN) USB driver, installed, uninstalled, re-installed.
. .
lgald said:
sounds like you are having the same USB problem I am on mine (see my post on no USB) BUT...after several weeks w no USB, today I connected the phone to my laptop so I could charge it and VOILA! The phone vibrated and asked me what usb connection did I want to select. Out of the blues, sure I've installed some games and what not but I troubleshot the problem for days several weeks ago and had absolutely no luck. I eventually gave up chalking it up as a bad USB on my phone and being that its rooted I couldnt exchange it. I still think its a defective USB but keep trying on yours and maybe it'll kick in like mine did, I did pull the battery like 10 times...I doubt that did it
Click to expand...
Click to collapse
Wow, that's weird, but great news for you...congrats!
My situation is a little different, since I have USB on the phone to "Ask on connection" and each and every time I plug in the USB the phone vibrates and makes me select. Doesn't matter WHAT I select. The phone thinks all is well, but any computer I try to attach it to says the device isn't recognized. And I've tried both of the drivers, and have tried each on a clean on install on 'fresh' computers.
...
Back to the topic in the thread title...
...
Since ODIN from an SD card is a no-go...how about a clockwork restore of a stock phone image?
Thanks...
do you have usb debugging enabled? if not enable that. also instead of ask on connection do mass storage thats how it has always worked for me
labbu63 said:
do you have usb debugging enabled? if not enable that. also instead of ask on connection do mass storage thats how it has always worked for me
Click to expand...
Click to collapse
Debugging on or off, no difference.
Kies, Media, Storage, PC Internet, Ask, no difference.
But thanks for trying!
Fivebraids,
Try it on another computer and see if the drivers download. Maybe something hosed your drivers. Kies always hoses mine.
Did you download and install the drivers that are on the OP in the Odin one click thread? Odin is *****y about drivers and sometimes they take a couple of tries.
Also, does the USB work when you just charge from a wall outlet? If it does then your phone is fine, it is a driver issue.
If you have a Nanadroid backup of stock ran through ClockworkMod within ROM Manager than the answer is yes, if you didn't create a Nandroid backup then the answer is no.
update: I just reread your OP and if it works with charging from the wall then you definately have a driver issue.
Ok, problem solved!
This no USB problem HAS to be a hardware, since I've tried every possible permutation of drivers, settings, different cables, different computers, etc.
I started this thread hoping that I could somehow restore the phone to stock (removing SRE, SU, etc. so I can return it for a new one) without being able to run ODIN. It appears that isn't possible, but I found a way to do the no-usb restore!
I got a copy of the files created by ROM manager of a stock Captivate. I then used Switfp to FTP these files over Wifi to my non-usb phone. I used Rom manager to 'restore' that set of files. All I had to do then was un-root, and voila...STOCK!
I'm off to AT&T tomorrow to return this second Captivate...hoping three times is a charm!
Thanks to everyone for the patience and assistance!
nice job i probably never would've thought of that
Can you link me where you got that stock rom to flash via Nandroid. I am in the same boat as you are. I can't even get my device into recovery. Tried all steps as you and no go on the usb. POS Cappy #2
Rooted my phone and things have been great...except now no matter what i do my pc will not recognize it. My wife has the same phone and it picks hers right up.
Any thoughts.
thanks
hhmmm.... does it ask for anything? do you have the debug option checked?
Ive tried everything...computer senses it but won't connect
Are you mounting the sdcard once you connect the usb cable?
it looks like its already mounted
i keep getting device not recognized.
i have it set to Ask on connection. Ive tried it with debug off and on. It just won't work. My wifes phone works perfect. Will a master reset do anything?
make sure usb debugging is on and if that doesn't work, try another usb port. I know my front ports give me trouble.
Looks like its mounted? Then it would be mounted. Pull down the notification bar and click on it to mount.
Weird I finally got it to work...i had it set to ask when connected. and it would just come up as not recognized on the pc and do nothing on the phone but charge. I switched it to mass storage and it finally worked. I did the 2.2 upgrade and im good now...my only question now is ...I was rooted and now im not? all the bloatware is back on my phone. Do i need to root again?
Thanks
jatkins09 said:
make sure usb debugging is on and if that doesn't work, try another usb port. I know my front ports give me trouble.
Click to expand...
Click to collapse
USB debugging DOES NOT need to be on for you to mount the phone's SD card to your computer.
gpzjack said:
Weird I finally got it to work...i had it set to ask when connected. and it would just come up as not recognized on the pc and do nothing on the phone but charge. I switched it to mass storage and it finally worked. I did the 2.2 upgrade and im good now...my only question now is ...I was rooted and now im not? all the bloatware is back on my phone. Do i need to root again?
Thanks
Click to expand...
Click to collapse
Which 2.2 ROM did you end up with? Most of the custom 2.2 ROMs are pre-rooted.
I used one that was on brief mobile.
gpzjack said:
Weird I finally got it to work...i had it set to ask when connected. and it would just come up as not recognized on the pc and do nothing on the phone but charge. I switched it to mass storage and it finally worked. I did the 2.2 upgrade and im good now...my only question now is ...I was rooted and now im not? all the bloatware is back on my phone. Do i need to root again?
Thanks
Click to expand...
Click to collapse
you didnt do an upgrade, you flashed an entirely new rom. this reset everything, including your root and bloatware.
i would recommend flashing back to stock and flashing a custom rom.
LOL Damn us newbies. I can't just load another rom...start with stock?
Ok. I found the stock rom. Any suggestions for custom rom...seem to be a bunch. Any list outlining benefits?
thanks
Hi All
I just have got a sensation. I cannot connect to my laptop anymore, it worked fine for a few days, but every time I connect it to my laptop, a message pops up saying that USB is not recognized, I have tried on three computers (XP + Win 7) have installed/uninstalled HTC sync with the drivers.
On the phone itself, I don't get a notification showing the options for USB connection (Charge, HTC sync etc), however it charges fine using the USB cable while connected to the PC.
I have reset my phone to factory default, formatted SD card, have tried another USB cable but no luck.
I just do not understand what can be wrong all of a sudden, once it was working fine last night but not today
Can someone please help? I have sent an email to HTC support already with this information. I'll see what they got to say about this.
Wish If i could help but I'm having the same problem since yesterday And I've tried all of the above with no luck!
Device running in stock rom, unlocked & used for 10 days only.
I had that same problem once on my Desire HD, I removed the sd card, re-inserted it and started the phone, was all good from that point on.
It might work for you too.
Any updates on this, guys ?
I had the same problem..
I used another usb kabel that fixed it for me
Sent from my HTC Sensation Z710e using XDA App
No solution for me yet!! i've searched up & down but still nothing.. its getting really frustrating.
i might get rid of it all together after all.
USB & Internet pass-through
I had this problem too. I uninstalled HTC Sync and all related HTC programmes from my laptop. Downloaded the latest HTC Sync from HTC site, and installed. After that, it worked again.
My Sensation is rooted.
Turnning on USB Debugging
Guys I really hope my question is related to this ..
I just can't seem to find out how to turn on USB debugging!!! I need that in order to install my 1st ROM + Writing Super CID, posts keep saying it can be turned on from settings .. where is that???
appreciate the guidance ..
titommh said:
Guys I really hope my question is related to this ..
I just can't seem to find out how to turn on USB debugging!!! I need that in order to install my 1st ROM + Writing Super CID, posts keep saying it can be turned on from settings .. where is that???
appreciate the guidance ..
Click to expand...
Click to collapse
Settings>Applications>Development>Tick box
i have this very same problem.
tried 4 different computers, windows xp, windows 7 x486, windows 7 x64...
tried different cables... different roms... different kernels... dettached sd card... umounted sd... mounted sd... debug mode... default modes upon connection... the problem is definitely in the phone itself...
the computer simply ignores the connection, no sign of it. the phone behaves like it is connected to a charger, not to usb.
can anybody help us?
I am also getting the same problem now!! I was downgrading to GB, then again i went to JB miui. Then i wanted to format my sdcard, formatted it through PC, and i installed new CM9 rom on it. Now, after the CM9 rom is booting, the device is not recognized by windows!!!
EDIT : Removed SDCARD, then powered off, then reinserted SD, and rebooted into recovery. It got mounted from recovery, and installed a new ROM. Now it works flawlessly!!!
pushpann said:
I am also getting the same problem now!! I was downgrading to GB, then again i went to JB miui. Then i wanted to format my sdcard, formatted it through PC, and i installed new CM9 rom on it. Now, after the CM9 rom is booting, the device is not recognized by windows!!!
EDIT : Removed SDCARD, then powered off, then reinserted SD, and rebooted into recovery. It got mounted from recovery, and installed a new ROM. Now it works flawlessly!!!
Click to expand...
Click to collapse
what rom did you install ?
Changing your cable may fix this problem.
Buy a new one.
After flashing EB v2.5 I could no longer acess files via usb cord, I have since switched to Phoenixblood v1.1 with the same results. Upon searching for similar issues I have found there are many people with this same problem and cannot seem to find a resoultion, I have tried different drivers with no luck. Here are some qoutes from others with the same issue:
I love it! It's the fastest rom I've ever used! But like all other roms I flash I cant use USB mass storage . suggestions anyone?
Click to expand...
Click to collapse
I am having the exact same problem. It only charges. Other than that there is no other indication either from the computer or the phone that it is even plugged into the computer. Really cramping my style. I am sure I speak for you in saying anyone's help on the matter would be greatly appreciated.
Click to expand...
Click to collapse
Hey all thanks in advance for any help. Ive been using weapon for a while now but got sick of the fc's so decided to try out eaglesblood. Ive installed it twice now and followed the instructions each time but I cant get my computer to mount my phones storage. It does make a noise when i connect it, so i know it sees my phone. And my phone gives me the option to use as mass storage but nothing happens. Any ideas? Does anyone else have problems with this?
Click to expand...
Click to collapse
I would post this in the related ROM thread, but I cannot since im new, any help would be greatly appreciated!
jacko147 said:
After flashing EB v2.5 I could no longer acess files via usb cord, I have since switched to Phoenixblood v1.1 with the same results. Upon searching for similar issues I have found there are many people with this same problem and cannot seem to find a resoultion, I have tried different drivers with no luck. Here are some qoutes from others with the same issue:
I would post this in the related ROM thread, but I cannot since im new, any help would be greatly appreciated!
Click to expand...
Click to collapse
Different USB? Sometimes they can "die."
I tried a different cable and a different computer with a different op sys
just for the sake of troubleshooting, can you take a screenshot of your device manager before and after you plug it in? I had my phone randomly do something similar, but I just wiped my system and reinstalled the drivers and all was fine, different problem than yours but any information you can give us is helpful.
happened to me... what i did was turn on usb debugging with the usb storage and apparently it work...
I noticed I couldn't mount USB mass storage on CM7 or clockwork recovery....using multiple computers. I fixed this by installing the LG USB drivers on my desktop....I've had no issues since. Though I had previously tried the same thing with my laptop and it didn't work.
If turning USB debugging off then on doesn't work I reinstall the drivers. Its happened to me once or twice and that seems to do the trick.
Get my app: Speakerphone Volume Control
Hey, i have had my sensation about 2 months, now when i connect it to a pc it dosnt ask what connection type to choose, it only charges, in the menu it is set to ask me about connection type, while connected to pc there is now no icon in the notification area (used to say 'charge only' or 'disk drive') even when rebooted into 4ext recovery and mounted/toggle usb connection, it dosnt connect as a disk drive like it has always done in the past, it only charges, i have tried 3 different pc's and 3 different micro usb cables, also have tried updating the firmware to 3.24 and installed ICS with the same result, i think its a hardware issue? last time it worked was 3 days ago connected via usb to a jvc headunit listening to my music files.
Weird problem!
Maybe you could try with a different SD card to eliminate the possibility of it being an SD card problem?
If it still doesn't work with another SD Card it may well be a hardware problem.
k0zmic said:
Weird problem!
Maybe you could try with a different SD card to eliminate the possibility of it being an SD card problem?
If it still doesn't work with another SD Card it may well be a hardware problem.
Click to expand...
Click to collapse
Yea i will try another sd, but on the phone in ES i can see all my files on the sd, and when i take out the card and put it in my laptop all the files are there no problem, i have also tried formatting the sd on the phone, still the same result but i will try a different card, yea i think its an actual hardware problem , cheers
leonclement said:
Hey, i have had my sensation about 2 months, now when i connect it to a pc it dosnt ask what connection type to choose, it only charges, in the menu it is set to ask me about connection type, while connected to pc there is now no icon in the notification area (used to say 'charge only' or 'disk drive') even when rebooted into 4ext recovery and mounted/toggle usb connection, it dosnt connect as a disk drive like it has always done in the past, it only charges, i have tried 3 different pc's and 3 different micro usb cables, also have tried updating the firmware to 3.24 and installed ICS with the same result, i think its a hardware issue? last time it worked was 3 days ago connected via usb to a jvc headunit listening to my music files.
Click to expand...
Click to collapse
Well I had the same problem with the custom ROM I use.
Installing it clean with a full wipe solved it.
It is definitely NOT the pc, laptop or SD-card.
Are you on a custom ROM?
- Yes then install clean with full wipe. (make a nandroid backup!!!) and install all apps new.
- No then do a total reset (reset to factory settings) and do all the install stuff new. After that you can also install with RUU your ROM designated for your device.
You will see your USB connection will show up!!
same here
i have exactly the same problem as described in op.
will try flashing a new rom then also; first have to buy a flashcard reader then to get my new rom ON the sd card....
or do you think a nandroid restore would fix the problem? will try that first.
Will report back
The nandroid might restore the problem.I'd try it first.if not , then do the full wipe reinstall as said above .if at the time of the nandroid back up it was working is a good possibility it will fix the issue. Hope this helps!
Sent from my HTC Sensation 4G using xda premium
I am having the same problem ..... Dont feel like wiping and going stock.
Sent from my HTC Sensation XE with Beats Audio using XDA
Couple of tips that might fix your problem.
If you're running aokp make sure you disable fast charge.
Turn on mtp in USB computer connection settings. I have trouble accessing the options from most custom roms, so a little work around is to install either apex or nova, long press add to home screen - shortcuts - activities - scroll down to Settings - USB computer connection(com.android.settings.usbsettings) . Tap it and you should get a shortcut. Select mtp.
Ultimately, the thing that fixed my same issue was getting a different USB cable lol. You can also try different ports on your computer.
Good luck, hope you can find a solution to your problem! If all else fails, you can try using airdroid for transfer over Wi-Fi
Anyone find a fix on this , mine has started doing this yesterday :crying:
Tried 3 different cables , different usb ports , different sd card , formatting sdcards in 4xt recovery , reflashing firmware.... also htc sync re installed for drivers (htc sync does not see the phone), adb re installed (adb does not see the phone??)
dont think its the rom as adb cannot see the phone in fastboot
anyone any other ideas , tried ninjasalad suggestion on enabling mtp also ??
I think you're fine. I had this problem after flashing ARHD 6.6.X, OrdDriod series, and PkMn series. What I did was the following:
Went into settings. Connect to PC. Unchecked the "ask me" , Restart phone. Then checked "ask me" again. Lastly, restarted phone again.
After doing that a couple times, it worked for me. Maybe you can try that.
This happened to me as well. I think it's a hardware problem
silverboi17 said:
I think you're fine. I had this problem after flashing ARHD 6.6.X, OrdDriod series, and PkMn series. What I did was the following:
Went into settings. Connect to PC. Unchecked the "ask me" , Restart phone. Then checked "ask me" again. Lastly, restarted phone again.
After doing that a couple times, it worked for me. Maybe you can try that.
Click to expand...
Click to collapse
This worked for me. Thanks a million!
same problem, only worse
I have the same problem with my LG optimus G, except my phone screen is broken so that I can't use it at all. I've been trying to connect to my computer to back up my contacts and such but it is only going into charge only mode. I went into the control panel and tried to change it there but I couldn't find it. I have windows 7 by the way. if anyone knows any way to help me pleasee save me!
ReZnOVO said:
I have the same problem with my LG optimus G, except my phone screen is broken so that I can't use it at all. I've been trying to connect to my computer to back up my contacts and such but it is only going into charge only mode. I went into the control panel and tried to change it there but I couldn't find it. I have windows 7 by the way. if anyone knows any way to help me pleasee save me!
Click to expand...
Click to collapse
check these
make sure you have enabled usb debugging mode from settings
install htc drivers
install htc sync(i am not sure if it is necessary)
use 2.0 usb ports
use the original usb cable if you aren't using it yet
wont work, screen broken
rzr86 said:
check these
make sure you have enabled usb debugging mode from settings
install htc drivers
install htc sync(i am not sure if it is necessary)
use 2.0 usb ports
use the original usb cable if you aren't using it yet
Click to expand...
Click to collapse
I can't do that because to enable usb debugging mode you have to use the phone and the phone's screen is completely broken and there's no way to even get into it using the touch screen.
ReZnOVO said:
I can't do that because to enable usb debugging mode you have to use the phone and the phone's screen is completely broken and there's no way to even get into it using the touch screen.
Click to expand...
Click to collapse
actually i just re-read your previous post
are yout alking about a sensation device or about the lg optimus g?
if you are talking about the lg then wrong forum
i can't help you further