Hey Guys -
I have had my A9 for about 2 months and love it. When I first purchased it, I rooted it using the method pinned to this forum which seemed to work well. Soon afterwards, I found out that when I inserted and tried to format an SD card as "internal", it wouldn't work and result in it showing as "corrupted." I soon found out that this seemed to be due to the root replacing the original boot.img which messes with encryption. Since the root was posted, SuperSU has been updated and that step has changed supposedly.
Now that I have some time, I want to fix this issue. Before doing so, I've read through many posts and think I have a plan. I wanted to post the steps I need to follow as I understood them to make sure my plan is correct and will result in not only being able to format an SD internally and be rooted, but also a working phone Below are the specs of my phone, the steps I think it may take to resolve, and a few questions I have after reading through numerous posts. Any help is appreciated!
Phone Specs
Some as currently listed in Settings
- HTC One A9
- AT&T USA
- Rooted / s-off
- Android 6.0 / Sense 7.0g
Software Number: 1.10.502.3
Kernel: 3.10.73-perf-g28d66e0
Baseband: [email protected]_29.05_F
Build: 1.10.502.3 CL635081 release keys
Android Security Patch Level: 2015-10-01
Steps to Fix
1. Backup any data desired (I have a nightly Titanium backup)
2. Download RUU for same version (1.10.502.3) from http://forum.xda-developers.com/one-a9/general/wip-ruu-htc-one-a9-t3240344
Should I use newer version or are those for different carriers?
3. Apply RUU (via embedded EXE or try to extract and apply using adb/fastboot)
4. Once phone is restored, make a backup of boot.img from phone just in case it's needed later
5. Install TWRP via adb/fastboot
6. Install SuperSU via TWRP
At this point (if I can make it to this point), test and see if the phone's rooted and I can format the SD internally. If so, great. If not, continue with the following steps...
7. Download & flash modded boot.img from A9 Root post
8. Install TWRP via adb / fastboot
9. Install SuperSU via TWRP
10. Flash original boot.img backed up in step #4 to my phone (since modded one was only needed initially to install SuperSU) So that encryption keys match and I may successfully format sd cards for internal use
My Questions
1. Are the steps above basically the process i need to perform or is there a better / easier way? I don't know if I could flash a common boot.img from an RUU or if it needs to be flashed to phone first for encryption purposes. Even if I can, I've tried to extract it from ruu.zip before and could not
2. Should I use an RUU for a newer version (over 1.10.502.3) or are those for different carriers and not work with my AT&T phone?
3. Does it make a difference if I install the RUU via embedded EXE or extract and apply using adb/fastboot?
4. What versions of TWRP & SuperSU should I use?
Any additional suggestions would be appreciated - I just want to get this resolved once and for all! - Thanks!
bzowk said:
Hey Guys -
I have had my A9 for about 2 months and love it. When I first purchased it, I rooted it using the method pinned to this forum which seemed to work well. Soon afterwards, I found out that when I inserted and tried to format an SD card as "internal", it wouldn't work and result in it showing as "corrupted." I soon found out that this seemed to be due to the root replacing the original boot.img which messes with encryption. Since the root was posted, SuperSU has been updated and that step has changed supposedly.
Now that I have some time, I want to fix this issue. Before doing so, I've read through many posts and think I have a plan. I wanted to post the steps I need to follow as I understood them to make sure my plan is correct and will result in not only being able to format an SD internally and be rooted, but also a working phone Below are the specs of my phone, the steps I think it may take to resolve, and a few questions I have after reading through numerous posts. Any help is appreciated!
Phone Specs
Some as currently listed in Settings
- HTC One A9
- AT&T USA
- Rooted / s-off
- Android 6.0 / Sense 7.0g
Software Number: 1.10.502.3
Kernel: 3.10.73-perf-g28d66e0
Baseband: [email protected]_29.05_F
Build: 1.10.502.3 CL635081 release keys
Android Security Patch Level: 2015-10-01
Steps to Fix
1. Backup any data desired (I have a nightly Titanium backup)
2. Download RUU for same version (1.10.502.3) from http://forum.xda-developers.com/one-a9/general/wip-ruu-htc-one-a9-t3240344
Should I use newer version or are those for different carriers?
3. Apply RUU (via embedded EXE or try to extract and apply using adb/fastboot)
4. Once phone is restored, make a backup of boot.img from phone just in case it's needed later
5. Install TWRP via adb/fastboot
6. Install SuperSU via TWRP
At this point (if I can make it to this point), test and see if the phone's rooted and I can format the SD internally. If so, great. If not, continue with the following steps...
7. Download & flash modded boot.img from A9 Root post
8. Install TWRP via adb / fastboot
9. Install SuperSU via TWRP
10. Flash original boot.img backed up in step #4 to my phone (since modded one was only needed initially to install SuperSU) So that encryption keys match and I may successfully format sd cards for internal use
My Questions
1. Are the steps above basically the process i need to perform or is there a better / easier way? I don't know if I could flash a common boot.img from an RUU or if it needs to be flashed to phone first for encryption purposes. Even if I can, I've tried to extract it from ruu.zip before and could not
2. Should I use an RUU for a newer version (over 1.10.502.3) or are those for different carriers and not work with my AT&T phone?
3. Does it make a difference if I install the RUU via embedded EXE or extract and apply using adb/fastboot?
4. What versions of TWRP & SuperSU should I use?
Any additional suggestions would be appreciated - I just want to get this resolved once and for all! - Thanks!
Click to expand...
Click to collapse
First off, this isn't Development.
Secondly, I explained to you how to fix this in the very root thread you linked several times.
Thirdly, there's a newer, official RUU from HTC right on their ROM Downloads website. I'd start by installing that (though I also have a recovery-flashable version of that ROM in my Base ROM thread).
Fourthly, with access to an official RUU, and my ROM decrypt script, you have access to the stock boot.img (which is also in the firmware zip in my Base ROM thread), which you can use as your baseline for restoring the verity key to the ramdisk, thereby allowing you to use adopted storage without any issues. Note however that I was only able to use adopted storage with the "forceencrypt" flag enabled.
Fifthly, you can't just restore the stock boot image (at least not if you want to stay rooted). You can be both rooted and encrypted, but you have to first make sure SuperSU is flashed and set up prior to allowing the device to be encrypted again (adopted storage only works with an encrypted device, and then you won't be able to access your storage with TWRP).
OK, OK - sorry.... It had been a while since posting and honestly forgot about that thread - my fault.
I decided to start fresh so have already restored the phone to HTC's latest RUU (1.27.502.5 ATT) as I already had it downloaded. I've also flashed TWRP 2.8.8.1 to the phone, but am obviously prompted to enter a password when I try to enter recovery. Based off what I've read, the steps below seem to be what I need to do so that I may be rooted + still have encryption for internal sd formatting. Is it correct (or close to it)
Using an Ubuntu 14.04 x86 VM...
1. Download & extract your decrypt script to a temp folder in linux vm
2. In Windows, run same RUU I applied and copy out rom.zip from %temp%
3. Rename "rom.zip" to "rom_a9.zip"
4. Copy rom_a9.zip to the ""place_rom_zip_here" folder of your extracted script in the vm
5. Run ./decrypt-htc and wait for script to complete to get img files
On Phone (Currently has same RUU installed + TWRP but not rooted)
6. Root phone using original method of flashing modded boot.img, install SuperSU, and get rooted
7. Once done and rooted, flash boot.img I extracted using your script above to phone via adb
Once that's done, it should be rooted + have encryption thus allowing me to use internal sd card, right? Sorry to be such a bother - just want to get this fixed and done with
Thanks!
bzowk said:
OK, OK - sorry.... It had been a while since posting and honestly forgot about that thread - my fault.
I decided to start fresh so have already restored the phone to HTC's latest RUU (1.27.502.5 ATT) as I already had it downloaded. I've also flashed TWRP 2.8.8.1 to the phone, but am obviously prompted to enter a password when I try to enter recovery. Based off what I've read, the steps below seem to be what I need to do so that I may be rooted + still have encryption for internal sd formatting. Is it correct (or close to it)
Using an Ubuntu 14.04 x86 VM...
1. Download & extract your decrypt script to a temp folder in linux vm
2. In Windows, run same RUU I applied and copy out rom.zip from %temp%
3. Rename "rom.zip" to "rom_a9.zip"
4. Copy rom_a9.zip to the ""place_rom_zip_here" folder of your extracted script in the vm
5. Run ./decrypt-htc and wait for script to complete to get img files
On Phone (Currently has same RUU installed + TWRP but not rooted)
6. Root phone using original method of flashing modded boot.img, install SuperSU, and get rooted
7. Once done and rooted, flash boot.img I extracted using your script above to phone via adb
Once that's done, it should be rooted + have encryption thus allowing me to use internal sd card, right? Sorry to be such a bother - just want to get this fixed and done with
Thanks!
Click to expand...
Click to collapse
Re-read my post. If you flash the stock boot.img, you will no longer be rooted.
And as I said in the original thread, you need to pull the rooted boot.img and add the verity key from the stock one to it. Also you'll need to add the forceencrypt and verify flag back.
P.S. You also need to re-read the instructions in the decrypt thread. You don't have to rename anything anymore.
Good Afternoon -
OK - sorry to frustrate you, but I think I finally have it figured out. I started from scratch, re-read many posts, and took notes. I was a little confused on the last part so wanted to verify, please...
I've already unpacked the boot.img from the latest HTC A9 (AT&T) RUU and have the two folders. I restored the same RUU to my phone, flashed TWRP 2.8.8.1, backed up the boot.img, and unpacked it before realizing that I should have probably rooted it first.
Correct me if I'm wrong, but here's all I need to do to finish....
1. Download modified A9 boot.img from top of root thread
2. Flash modded boot.img using fastboot
3. Verify TWRP is still installed then use it to install SuperSU 2.67 (latest)
4. Back up boot partition just like I did before in TWRP
5. Unpack it on PC to create ramdisk and split_img folders
6. Copy verity_key from unpack of the actual RUU and overwrite one in rooted unpack
7. Edit the file fstab.qcom in the ramdisk folder of the rooted unpack in Notepad++ and add the "verify" flag after the wait flag on the fist uncommented line - save
8. Repack rooted boot.img
9. Flash phone with repacked boot.img using fastboot
10. Reboot & enjoy a rooted phone + encryption allowing sd internal formatting
Promise not to bug anymore if I can just get this resolved.
Thanks again for your assistance!
UPDATE
Hmm - was just prepping and went to download modded file from root thread's first post. Doesn't seem to have one that matches newest build of RUU I flashed - if I'm interpreting it correctly. Researching further, but if know of alternate method or another solution to get through steps 1 & 2 about (assuming they are correct), I'd appreciate it. Thanks
bzowk said:
Good Afternoon -
OK - sorry to frustrate you, but I think I finally have it figured out. I started from scratch, re-read many posts, and took notes. I was a little confused on the last part so wanted to verify, please...
I've already unpacked the boot.img from the latest HTC A9 (AT&T) RUU and have the two folders. I restored the same RUU to my phone, flashed TWRP 2.8.8.1, backed up the boot.img, and unpacked it before realizing that I should have probably rooted it first.
Correct me if I'm wrong, but here's all I need to do to finish....
1. Download modified A9 boot.img from top of root thread
2. Flash modded boot.img using fastboot
3. Verify TWRP is still installed then use it to install SuperSU 2.67 (latest)
4. Back up boot partition just like I did before in TWRP
5. Unpack it on PC to create ramdisk and split_img folders
6. Copy verity_key from unpack of the actual RUU and overwrite one in rooted unpack
7. Edit the file fstab.qcom in the ramdisk folder of the rooted unpack in Notepad++ and add the "verify" flag after the wait flag on the fist uncommented line - save
8. Repack rooted boot.img
9. Flash phone with repacked boot.img using fastboot
10. Reboot & enjoy a rooted phone + encryption allowing sd internal formatting
Promise not to bug anymore if I can just get this resolved.
Thanks again for your assistance!
UPDATE
Hmm - was just prepping and went to download modded file from root thread's first post. Doesn't seem to have one that matches newest build of RUU I flashed - if I'm interpreting it correctly. Researching further, but if know of alternate method or another solution to get through steps 1 & 2 about (assuming they are correct), I'd appreciate it. Thanks
Click to expand...
Click to collapse
You don't need anything from that root thread. Everything there is deprecated (which I've said several times).
If you already have the stock boot.img unpacked and ready to go, all you have to do is flash SuperSU, then back up the rooted boot.img that you now have on your device thanks to SuperSU. Unpack that boot.emmc.win and add the verity_key from the stock ramdisk and replace the fstab.qcom with the one from the stock ramdisk. Repack, flash to your device via fastboot or TWRP, and your device will encrypt on that first boot and you'll be good to go.
Just to make sure - you did a Format Data in TWRP prior to flashing SuperSU, correct?
Captain_Throwback said:
You don't need anything from that root thread. Everything there is deprecated (which I've said several times).
If you already have the stock boot.img unpacked and ready to go, all you have to do is flash SuperSU, then back up the rooted boot.img that you now have on your device thanks to SuperSU. Unpack that boot.emmc.win and add the verity_key from the stock ramdisk and replace the fstab.qcom with the one from the stock ramdisk. Repack, flash to your device via fastboot or TWRP, and your device will encrypt on that first boot and you'll be good to go.
Just to make sure - you did a Format Data in TWRP prior to flashing SuperSU, correct?
Click to expand...
Click to collapse
Thanks -
Well, that's the thing... One of the two unpacked boot.img I have currently is wrong. The two I have are:
- One unpacked boot.img extracted from latest RUU using your script in linux
- One unpacked boot.img backed up from unrooted phone which only had TWRP flashed
That was part of my question. I know that the 2nd unpacked boot.img above is worthless as the phone needed to be rooted prior to me backing it up. The question for me is how to flash superSU onto the phone (which currently has the same latest RUU + TWRP 2.8.8.1 installed) if I can only access TWRP is a read-only mode as I'm prompted for password upon booting to recovery. That's why I brought up the legacy root method as I don't know of an alternative... unless SuperSU doesn't require write permissions to whatever TWRP has locked down currently.
Once I can root it, backup it's boot, and unpack it; I just need to literally copy & overwrite the "verity_key" and "fstab.qcom" files (assuming the only difference is the fstab.qcom I'm overwriting doesn't have the verify flag), repack, then flash back to phone via fastboot, right?
Thanks for your patience!
bzowk said:
Thanks -
Well, that's the thing... One of the two unpacked boot.img I have currently is wrong. The two I have are:
- One unpacked boot.img extracted from latest RUU using your script in linux
- One unpacked boot.img backed up from unrooted phone which only had TWRP flashed
That was part of my question. I know that the 2nd unpacked boot.img above is worthless as the phone needed to be rooted prior to me backing it up. The question for me is how to flash superSU onto the phone (which currently has the same latest RUU + TWRP 2.8.8.1 installed) if I can only access TWRP is a read-only mode as I'm prompted for password upon booting to recovery. That's why I brought up the legacy root method as I don't know of an alternative... unless SuperSU doesn't require write permissions to whatever TWRP has locked down currently.
Once I can root it, backup it's boot, and unpack it; I just need to literally copy & overwrite the "verity_key" and "fstab.qcom" files (assuming the only difference is the fstab.qcom I'm overwriting doesn't have the verify flag), repack, then flash back to phone via fastboot, right?
Thanks for your patience!
Click to expand...
Click to collapse
Once you Format Data in TWRP and reboot recovery, you can flash SuperSU and you will be rooted. You just have to back up the boot.img after flashing SuperSU on the unencrypted device to re-enable verity so that adopted storage will work.
P.S. And no, the verify flag isn't the only difference. As I also said earlier (I'm constantly repeating myself), the device must be encrypted for Adopted Storage to work, so the forceencrypt flag from the stock fstab must also be present. That's why it's easier just to replace the whole file. The problem you have at the end of the day is that, while you'll be rooted and be able to use adopted storage in Android, you still won't be able to access said storage (or /data) in TWRP.
Captain_Throwback said:
Once you Format Data in TWRP and reboot recovery, you can flash SuperSU and you will be rooted. You just have to back up the boot.img after flashing SuperSU on the unencrypted device to re-enable verity so that adopted storage will work.
P.S. And no, the verify flag isn't the only difference. As I also said earlier (I'm constantly repeating myself), the device must be encrypted for Adopted Storage to work, so the forceencrypt flag from the stock fstab must also be present. That's why it's easier just to replace the whole file. The problem you have at the end of the day is that, while you'll be rooted and be able to use adopted storage in Android, you still won't be able to access said storage (or /data) in TWRP.
Click to expand...
Click to collapse
Great - Thanks!!
Just to make sure, below's my plan with a small question @ step #5. Does it get your stamp of approval?
Phone (A9) already had latest RUU restored (same RUU I ran against your script to pull boot.img from) and TWRP 2.8.8.1 flashed
1. Boot into TWRP & bypass initial screen prompting for password
2. Format Data
3. Reboot back into TWRP
4. Flash SuperSU 2.76 zip
5. Reboot to system then back to TWRP and backup boot partition? / Stay in TWRP and backup boot partition? / Reboot back into TWRP and backup boot partition?
6. Unpack backed up boot partition from phone
7. Copy "verity_key" & "fstab.qcom" files from ramdisk folder in unpacked RUU boot and paste into & overwrite same files in ramdisk folder of unpacked boot from rooted phone
8. Repack rooted phone boot (which includes both new files)
9. Flash newly packed boot.img to phone using fastboot
10. Enjoy
I really appreciate your help and patience with me!
bzowk said:
Great - Thanks!!
Just to make sure, below's my plan with a small question @ step #5. Does it get your stamp of approval?
Phone (A9) already had latest RUU restored (same RUU I ran against your script to pull boot.img from) and TWRP 2.8.8.1 flashed
1. Boot into TWRP & bypass initial screen prompting for password
2. Format Data
3. Reboot back into TWRP
Click to expand...
Click to collapse
Good so far . . .
bzowk said:
4. Flash SuperSU 2.76 zip
Click to expand...
Click to collapse
I'm sure this is just a typo, but that should be 2.67, not 76 (there is no 2.76).
bzowk said:
5. Reboot to system then back to TWRP and backup boot partition? / Stay in TWRP and backup boot partition? / Reboot back into TWRP and backup boot partition?
Click to expand...
Click to collapse
Bolded the correct one above (no need to leave TWRP as the necessary modifications have already been made).
bzowk said:
6. Unpack backed up boot partition from phone
7. Copy "verity_key" & "fstab.qcom" files from ramdisk folder in unpacked RUU boot and paste into & overwrite same files in ramdisk folder of unpacked boot from rooted phone
8. Repack rooted phone boot (which includes both new files)
Click to expand...
Click to collapse
Looks good . . .
bzowk said:
9. Flash newly packed boot.img to phone using fastboot
Click to expand...
Click to collapse
TWRP can also flash the new image, but fastboot is probably the most reliable way to do it.
bzowk said:
10. Enjoy
Click to expand...
Click to collapse
Hopefully . . . You'll likely get a reboot on the first boot (possible multiple reboots), as SuperSU needs a reboot to install the necessary files. Since your device will also encrypt on that initial boot, I'm not sure whether there will be a conflict or not.
bzowk said:
I really appreciate your help and patience with me!
Click to expand...
Click to collapse
Guess we'll see if it all works out . . .
Thanks!
I proceeded by formatting data, booting directly back intoTWRP, flashing SuperSU, backing up the boot partition, then mounting and copying it over to my PC. The boot.img size was 65,536kb - the same size as the one I unpacked from the RUU. Once unpacked, it was missing the verity_key file and the fstab.qcom file was different + missing the verify flag.
I replaced those two files, then ran repackimg.bat which created image-new.img which I renamed to boot.img. Interesting, though, that this file was only 45,890kb. If it's a repack, shouldn't it be the same or similar? Anyways, the phone was still in TWRP (hadn't booted to system since before the format data) so booted it into bootloader directly and tried flashing boot using my new 45mb boot.img.
If failed - but - my phone was only at 17% power. Don't know if that's why it failed or not so it's charging right now while still in the bootloader. Below is what was echoed when I tried flashing it:
Code:
c:\adb>fastboot flash boot boot.img
target reported max download size of 800000000 bytes
sending 'boot' (45890 KB)...
OKAY [ 3.488s]
writing 'boot'...
(bootloader) HOSD CL#656287
FAILED (remote: 4 RU_BATTERY_LOW please connect charger (17% < 30%))
finished. total time: 4.506s
The reason I didn't boot to system is that I thought that was when the encryption might take place. Going to wait until above 30% power then try flashing again. Powered down to charge, but plan to boot straight back into bootloader to flash. If you see anything that stands out or that I need to do otherwise, please let me know. Otherwise, I'll report back what the result was after getting above 30%.
Thanks again!
bzowk said:
Thanks!
I proceeded by formatting data, booting directly back intoTWRP, flashing SuperSU, backing up the boot partition, then mounting and copying it over to my PC. The boot.img size was 65,536kb - the same size as the one I unpacked from the RUU. Once unpacked, it was missing the verity_key file and the fstab.qcom file was different + missing the verify flag.
I replaced those two files, then ran repackimg.bat which created image-new.img which I renamed to boot.img. Interesting, though, that this file was only 45,890kb. If it's a repack, shouldn't it be the same or similar? Anyways, the phone was still in TWRP (hadn't booted to system since before the format data) so booted it into bootloader directly and tried flashing boot using my new 45mb boot.img.
If failed - but - my phone was only at 17% power. Don't know if that's why it failed or not so it's charging right now while still in the bootloader. Below is what was echoed when I tried flashing it:
Code:
c:\adb>fastboot flash boot boot.img
target reported max download size of 800000000 bytes
sending 'boot' (45890 KB)...
OKAY [ 3.488s]
writing 'boot'...
(bootloader) HOSD CL#656287
FAILED (remote: 4 RU_BATTERY_LOW please connect charger (17% < 30%))
finished. total time: 4.506s
The reason I didn't boot to system is that I thought that was when the encryption might take place. Going to wait until above 30% power then try flashing again. Powered down to charge, but plan to boot straight back into bootloader to flash. If you see anything that stands out or that I need to do otherwise, please let me know. Otherwise, I'll report back what the result was after getting above 30%.
Thanks again!
Click to expand...
Click to collapse
The repack is smaller because the backup uses "dd" to copy the entire block device. Not all that space is actually used after compression. That's nothing to worry about.
And these devices are very picky about flashing only when there's sufficient battery, so I'm sure that's the only reason it failed. TWRP, however, doesn't care how much battery you have, so you could always flash the new boot.img in recovery.
Captain_Throwback said:
The repack is smaller because the backup uses "dd" to copy the entire block device. Not all that space is actually used after compression. That's nothing to worry about.
And these devices are very picky about flashing only when there's sufficient battery, so I'm sure that's the only reason it failed. TWRP, however, doesn't care how much battery you have, so you could always flash the new boot.img in recovery.
Click to expand...
Click to collapse
Hey, hey, hey - think it worked!!
Once I got above 30%, I flashed without issue. I rebooted and was able to format an sd internally successfully, too. Now, I just need to verify it's rooted, but think it is. Thank you so much for your help! I'm going to write a guide for newbs like me to use in the future soon.
Thanks again!
bzowk said:
Hey, hey, hey - think it worked!!
Once I got above 30%, I flashed without issue. I rebooted and was able to format an sd internally successfully, too. Now, I just need to verify it's rooted, but think it is. Thank you so much for your help! I'm going to write a guide for newbs like me to use in the future soon.
Thanks again!
Click to expand...
Click to collapse
If your adopted storage doesn't show as corrupted, and you're able to open the SuperSU app in your app drawer and not get a message that no su binary is installed, you should be good to go .
bad topic
Hello all,
I really need, for a commercial project, to flash a great number (>100) of Galaxy Camera 2 (EK-GC200() device, all with the same firmware, rooted and modified as I need.
I have to flash boot.img (modified by me) and system.img (rooted).
I have now to root the camera, then start the system, enable developer options, enable adb debug and at the end flash a new boot.img, and the system.img itself (adb shell, dd ...).
This is time consuming, and error prone.
I'm sure the boot.img & system.img are correct, cause I can flash them without error (and they work fine) with dd from the internal emulated sdcard.
I can see two viable alternatives:
1. A custom recovery, from where I could make a nandroid backup, which I can use later on to update all the rest of the cameras.
But:
I tried to port the EK-GC100 cwm recovery, I've been able to boot it up, but the touchscreen is unusable and I got a lot of error coming from the file system.
Please help me! Any suggestion, half project, everything is really appreciated!
2. To create an Odin package, using the .img files I can optain with dd from a ready camera.
But:
I tried all I can do to build a Odin package, but every time I got an error (Odin Fail) when I try to flash system.img.
I tried to build a package containing recovery.img + boot.img, and that works.
I tried to build a package containing only system.img, and it doesn't work, every time I got a Fail from Odin.
I tried manual compression (tar + md5sum on Linux), and automated scripts you can find on XDA, both under Linux and Windows.
Why is system.img impossible to flash?
What am I missing?
Thank you in advance.
Ciao,
Giovanni