Hi all,
Hope this is the correct forum to write this post at.
I installed a ROM on my TF but it seems that the "Asus Keyboard" section is missing.
Where can I find it inside the system partition? I would like to manually add it to the ROM I'm using.
P.S I need it to allow my dock station to enable Hebrew support.
Thanks in advance.
it should be in system/app (name keyboard.apk)
http://dl.dropbox.com/u/16959871/Keyboard.apk
Re:
baseballfanz said:
it should be in system/app (name keyboard.apk)
http://dl.dropbox.com/u/16959871/Keyboard.apk
Click to expand...
Click to collapse
Hi sir, thanks for your quick reply!
Though, this .apk file is already installed on my system.
But still I cannot get the "Asus Keyboard' menu in the Language settings...
Maybe there is one more application related? or maybe even some specific file's I should add to the system?
Thanks in advance.
CrAzYoNi said:
Hi sir, thanks for your quick reply!
Though, this .apk file is already installed on my system.
But still I cannot get the "Asus Keyboard' menu in the Language settings...
Maybe there is one more application related? or maybe even some specific file's I should add to the system?
Thanks in advance.
Click to expand...
Click to collapse
Oh OK, maybe because it's US keyboard so it don't show up unless you choose English. Not sure just a guess on that.
Maybe there's Asus keyboard for other language?
Edit: Yes I changed my language to something else and the Asus US keyboard don't show up.
Re:
I'm checking that issue via another ROM assistance.
I think that Keyboard.apk is for the Android Keyboard menu...
Asus Keyboard, I guess, will use diffarent APK file...
Related
Hi there,
Got a Note locally here in Hong Kong and it came preinstalled with ZSKK1. I played around with it a bit and quite liked the DioPen Chinese IME that was built in.
I have since then flashed Sheep ROM, which is considerably smoother. However, I'd like to have the DioPen CIME.
Would it be possible to pull the DioPen apk from system/apps and the .SO file from system/lib from the HK rom and put them in their respective locations in my device? This is how it worked on the Galaxy Tab 10.1.
Or is there another way to get it on? Otherwise- any suggestions for handwriting Chinese input?
Thanks!
yamanote said:
Hi there,
Got a Note locally here in Hong Kong and it came preinstalled with ZSKK1. I played around with it a bit and quite liked the DioPen Chinese IME that was built in.
I have since then flashed Sheep ROM, which is considerably smoother. However, I'd like to have the DioPen CIME.
Would it be possible to pull the DioPen apk from system/apps and the .SO file from system/lib from the HK rom and put them in their respective locations in my device? This is how it worked on the Galaxy Tab 10.1.
Or is there another way to get it on? Otherwise- any suggestions for handwriting Chinese input?
Thanks!
Click to expand...
Click to collapse
See the post two:
http://forum.xda-developers.com/showthread.php?t=1365587
Download the files fm post one. It should helps you out.
Another alternative that I m using is Go keyboard fm Market. It's a good chinese writing input too.
With Go Keyboard, it is much easier to switch between Chinese and English keyboard (which is very tedious with the stock IMEs). However, I feel that the recognition is not as good. There are several words that I have to draw many times before I can get a hit.
Try TouchPal V5 Input which is free from market, work great and so far I found it is the best for both English and Chinese handwriting input.
Hi, I am from Hong Kong too, facing the same probelm.....
I have another probelm is finding the direction of "/system/lib" , I have the flashed the rocket V11 on my note, and now I don't see the "/system/lib" in my device, so how can I find it out????
Pls help me....
Sarboylee said:
Hi, I am from Hong Kong too, facing the same probelm.....
I have another probelm is finding the direction of "/system/lib" , I have the flashed the rocket V11 on my note, and now I don't see the "/system/lib" in my device, so how can I find it out????
Pls help me....
Click to expand...
Click to collapse
Your device must have root explorer application installed
and
here is the link for original HK Chinese language support
http://www.multiupload.com/3VJT1EC4FS
Install instruction:
1) Copy following files from Chinese Stock Rom to sdcard
- /system/app/diopenchineseIME.apk
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
2) use any root explorer to copy back the following file to /system/lib/
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
3) reboot, then install diopenchineseIME.apk
it works, I am now using chinese input in this perfect rom.
have fun.
ROY10 said:
Your device must have root explorer application installed
and
here is the link for original HK Chinese language support
http://www.multiupload.com/3VJT1EC4FS
Install instruction:
1) Copy following files from Chinese Stock Rom to sdcard
- /system/app/diopenchineseIME.apk
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
2) use any root explorer to copy back the following file to /system/lib/
- /system/lib/libdhwrcn.so
- /system/lib/libdwpcn.so
- /system/lib/libhangulcore.so
- /system/lib/libkeyboardcn.so
3) reboot, then install diopenchineseIME.apk
it works, I am now using chinese input in this perfect rom.
have fun.
Click to expand...
Click to collapse
thks for the guide
TouchPal TC problem
aezv said:
Try TouchPal V5 Input which is free from market, work great and so far I found it is the best for both English and Chinese handwriting input.
Click to expand...
Click to collapse
I installed the Touchpal keyboard. i found a strange problem. Every night I power off the phone. next morning, when I power it up, the touchPal settings will be lost. everyday I need to re-check the Traditional Chinese check box, or else it will start writing simplified characters. Very annoying.
The "Diopen Chinese IME" here not working in AlBa ZCLP5 ICS Middle Rom, anybody got a fix or new version? Thansk!!!
flash the ics leak stock and you get Chinese keyboard.
dzman said:
The "Diopen Chinese IME" here not working in AlBa ZCLP5 ICS Middle Rom, anybody got a fix or new version? Thansk!!!
Click to expand...
Click to collapse
lf it is only pinying that u need , use swype, it has most language.
Sent from my GT-N7000 using xda premium
Try BaiduInput (百度输入法)
Search at Google Play, is free. ^^
dzman said:
The "Diopen Chinese IME" here not working in AlBa ZCLP5 ICS Middle Rom, anybody got a fix or new version? Thansk!!!
Click to expand...
Click to collapse
OK, I got it. Get 'SamsungChineseIME App' from Midnote, put it in system/app of AlBa. Both keyboard and handwriting work perfectly. Hope it will help the others need Chinese Input.
dzman said:
OK, I got it. Get 'SamsungChineseIME App' from Midnote, put it in system/app of AlBa. Both keyboard and handwriting work perfectly. Hope it will help the others need Chinese Input.
Click to expand...
Click to collapse
Can you post the files? the midnote link is no longer avail. Also, do you know if the SamsungChineseIME.apk file is the same as the one from chainfire's LP1 ics repack? or the LP6 repack?
Go keyboard has been used as a substitute with a custom rom
Its nice
hocgwai said:
Can you post the files? the midnote link is no longer avail. Also, do you know if the SamsungChineseIME.apk file is the same as the one from chainfire's LP1 ics repack? or the LP6 repack?
Click to expand...
Click to collapse
Here you go. By the way, now I updated to alba v3. It works great as well. It's not the same as the one in chainfire's LP1 ics repack or the LP6 repack.
dzman said:
Here you go. By the way, now I updated to alba v3. It works great as well. It's not the same as the one in chainfire's LP1 ics repack or the LP6 repack.
Click to expand...
Click to collapse
thanks, much appreciated
dzman said:
Here you go. By the way, now I updated to alba v3. It works great as well. It's not the same as the one in chainfire's LP1 ics repack or the LP6 repack.
Click to expand...
Click to collapse
this version is the old one, you need the better newer one.
Greetings,
I've just falshed the JB in my TF101, everything went fine unless the physical keyboard language input, before i was using Ctrl + Shift to change the language but now it's not working.
sorry for my bad english i wish you got what i need.
Go to settings>language and input and the change it there.
droyd4life said:
Go to settings>language and input and the change it there.
Click to expand...
Click to collapse
I did it but when I try to change the language it does not work..
Keyboard not working as well
wassim79 said:
I did it but when I try to change the language it does not work..
Click to expand...
Click to collapse
I too have flashed several roms from ICS to JB with no luck with keyboard dock support. I have actually bought 2 docks for the TF101 and neither will work on my rooted transformer with cyna 10..... HELP!!! please
any help please? i don't want to go back to ICS please. is there any possible solution?
Hi,
I'm writing here because I can't post in the ROM dedicated thread...
I've installed the italian keyboard from the dedicated "Download" link in the main post.
Now I can use the suggestions in my language but I can't add custom words to my personal dictionary; If I go tho keyboard and language settings the settings app crash.
Any help?
Thanks,
tode
tode.guru said:
Hi,
I'm writing here because I can't post in the ROM dedicated thread...
I've installed the italian keyboard from the dedicated "Download" link in the main post.
Now I can use the suggestions in my language but I can't add custom words to my personal dictionary; If I go tho keyboard and language settings the settings app crash.
Any help?
Thanks,
tode
Click to expand...
Click to collapse
Its a bug in 5.2.0. A few people have mentioned it. They will add you if type them in a message as it will auto save them. :good:
3484jacks said:
Its a bug in 5.2.0. A few people have mentioned it. They will add you if type them in a message as it will auto save them. :good:
Click to expand...
Click to collapse
Thank you, I will follow the 5.2 evolution to get a patch/solution,
tode
Try it...
Dear try it
Simply ownload GO Keyboard from Play Store.
Guys, there's no way to activate this in any language for me...
Missing option. Could anyone help, please?
gpvecchi said:
Guys, there's no way to activate this in any language for me...
Missing option. Could anyone help, please?
Click to expand...
Click to collapse
Make sure your Google search app is updated.
Sure, latest version flashed with Banks Gapps...
So, as system app...
OK google everywhere works only with english us language. Select it, open google search, close it and then look in the settings. It must show those settings. If it doesn't show, reboot once.
Hello!
Can anybody tell me which Launcher XTRONS is using for their Headunits with Android 8.0 and where to get it from? (see attachment)
It's my favourite one and I would like to use it with a Custom ROM.
Thank you!
erdloch said:
Hello!
Can anybody tell me which Launcher XTRONS is using for their Headunits with Android 8.0 and where to get it from? (see attachment)
It's my favourite one and I would like to use it with a Custom ROM.
Thank you!
Click to expand...
Click to collapse
Here you are. I've extracted them especially for you from the Malaysk ROM. The launcher you are looking for is the GS one
P.S. It could be that you also need the widgets. Ask me again if so.
Great, thank you!
PS: yes, please also give me the Widgets - THANK YOU!
erdloch said:
PS: yes, please also give me the Widgets - THANK YOU!
Click to expand...
Click to collapse
I've uploaded the widgets apk
thank you, but I can only find the widget for the HCT launcher - or is it the same as the "GS" launcher? (the one that I am looking for)
erdloch said:
thank you, but I can only find the widget for the HCT launcher - or is it the same as the "GS" launcher? (the one that I am looking for)
Click to expand...
Click to collapse
HCT is the software developer of different Android head units like HA, GS, KGL, LM, KLD, ... The software installed on the units is the same, only the launchers are different. That`s why this apk is called HCTwidget_GS.apk. GS is Xtrons (seller).
Hey Guys,
thx Oberbergler for the upload, but it doesnt work for me and my friend.
The installer just says that he cant install this program. (Launcher3_GS.apk) @erdloch
Did u had any success with the installation?
waxjee said:
Hey Guys,
thx Oberbergler for the upload, but it doesnt work for me and my friend.
The installer just says that he cant install this program. (Launcher3_GS.apk) @erdloch
Did u had any success with the installation?
Click to expand...
Click to collapse
That's a package name problem because all hct launchers in Android 8 are using the same package name. You have to uninstall the stock launcher of your ROM first.
I had no chance to try it yet, but will probably do this today or tomorrow.
Maybe a stupid question, but what happens when I delete the stock launcher? Do I still have an interface where I can install the Launcher3_GS.apk? Do I get the "standard" Android launcher?
Oberbergler said:
That's a package name problem because all hct launchers in Android 8 are using the same package name. You have to uninstall the stock launcher of your ROM first.
Click to expand...
Click to collapse
Thx for the answer.
I've uninstalled all the launchers in the system apps including Launcher3, except the LauncherLM. That's the only launcher remaining on my device.
And i still can't install the Launcher3_GS.apk
Do you know where I've could went wrong?
I have the same problem as waxjee...any suggestions?
I have the same problem and I don't know how to solve it. We need an app with different package name, but I don't know how to compile it.
Oberbergler said:
I have the same problem and I don't know how to solve it. We need an app with different package name, but I don't know how to compile it.
Click to expand...
Click to collapse
You could try changing the package name by editing the AndroidManifest.xml file using apkstudio. I use version 4.0.3 and have done with other apps that I need original and modified versions installed on the same deviice and it works great.
Change the package name (Usually top line "package=")
Save
Build
Sign
Then copy to your device and install
The save, build, sign are all buttons on the toolbar, and I have found it works a treat.
Hello,
wanted to ask if someone has already solved the problem, the GS Launcher to install and if he did it how the whole thing works.
Thank you for your feedback
Hi, i found this forum thread after looking for the exact same launcher theme. Im havin no luck installing it, i seem to have no permissions to install it at all. I've yet to try apkstudio, but im completely unable to uninstall the stock launcher, the option is greyed out! Any ideas?
This would also be very useful for me too as I am indeed looking for this launcher. But my unit has not been rooted and have no wish too... can this still be done?
It's an old thread but hopefully it's still alive
I tried changing the package name using APKStudio but somehow I couldn't. Can someone with the right skill set please change the package name for the "GS" LAUNCHER located in the first page and uploaded it back here. Thanks a lot!
any one had any luck with this?
anyone get this working?