hello people! noob here!
my phone (fit S5670) has gingerbread 2.3.6, it was working fine... last night i saw this "MobileOdin" app, i installed it and created a dump file (that's all mobileodin can do to S5670). this morning i noticed that i don't have network (signal) service, so i restarted my phone the i found out that the boot sound also is gone! it also restarts continuously!... no audio sounds at all (ringtone, calls, alarms)...
I tried flashing a new firmware (same firmware) and another one (different region), tried to flash it with a custom rom (deodexed xxkpl) but still the same problem!!
can anyone help me, guide me so i can fix the problem!
thankful for any help!
users5670 said:
hello people! noob here!
my phone (fit S5670) has gingerbread 2.3.6, it was working fine... last night i saw this "MobileOdin" app, i installed it and created a dump file (that's all mobileodin can do to S5670). this morning i noticed that i don't have network (signal) service, so i restarted my phone the i found out that the boot sound also is gone! it also restarts continuously!... no audio sounds at all (ringtone, calls, alarms)...
I tried flashing a new firmware (same firmware) and another one (different region), tried to flash it with a custom rom (deodexed xxkpl) but still the same problem!!
can anyone help me, guide me so i can fix the problem!
thankful for any help!
Click to expand...
Click to collapse
Hello! do you have an old system backup? something like a CWM backup?
users5670 said:
hello people! noob here!
my phone (fit S5670) has gingerbread 2.3.6, it was working fine... last night i saw this "MobileOdin" app, i installed it and created a dump file (that's all mobileodin can do to S5670). this morning i noticed that i don't have network (signal) service, so i restarted my phone the i found out that the boot sound also is gone! it also restarts continuously!... no audio sounds at all (ringtone, calls, alarms)...
I tried flashing a new firmware (same firmware) and another one (different region), tried to flash it with a custom rom (deodexed xxkpl) but still the same problem!!
can anyone help me, guide me so i can fix the problem!
thankful for any help!
Click to expand...
Click to collapse
try any firmware tht dont have .tar file to install
i mean tht install with 4 files and 1 ops (like kpi)
that may work
twistergear said:
Hello! do you have an old system backup? something like a CWM backup?
Click to expand...
Click to collapse
justkiddinghere said:
try any firmware tht dont have .tar file to install
i mean tht install with 4 files and 1 ops (like kpi)
that may work
Click to expand...
Click to collapse
@ twistergear - i don't have any form of back ups.
@ justkiddinghere - i tried it but didn't work too!
anyways... i have several threads and i believe it about the EFS (nv_data.bin) file. So it is a deeper problem i suppose!
Thanks for you time guys!
Related
Hi all,
I bought new Sansung Galaxy ACE (Froyo 2.2.1)
I flashed with Custom ROM VillainROM 1.0 (the only ROM available for ACE)..
But now I wants to downgrade to 2.2.1 back..since VillainROM is having few bugs..
I tried following steps but could not succeed..
a) Download Stock ROM from samfirmware.com
b) Download Cooper.ops file from above source.
c) Flashed with Odin...selected one package option
Every thing was going right..but when Odin flash a message " -------wait for reboot....." (which is generally appears every time when we flash normally) my phone did not restart...I tried 3-4 time ...but nothing happened..even I was not able to restart by cell
Then I re-flashed with VillainROM, my cell was flashed perfectly..!!!
Then again tried stock ROM...but again same..nothing happened..
Now the problem is when ever i tried to flash with stock rom..no results..but when with VillainROM..its perfectly flashed..
Can any one help..?
Note: I have downloaded every thing twice to confirm corrupt files..
U need to download from samfirmware a multi file froyo package (so that include APBOOT). After succesfuly instal Froyo again you can flash with the latest (prefered) one package release.
Gl dude
entu said:
U need to download from samfirmware a multi file froyo package (so that include APBOOT). After succesfuly instal Froyo again you can flash with the latest (prefered) one package release.
Gl dude
Click to expand...
Click to collapse
Hey..thnks..Can u just give me the link for those files...
Because I am not able to locate those file any where..
here it is
w w w.samfirmware.com/WEBPROTECT-s5830.htm
i think those who say "multi-csc***" are stoks with multiple file
entu said:
here it is
w w w.samfirmware.com/WEBPROTECT-s5830.htm
i think those who say "multi-csc***" are stoks with multiple file
Click to expand...
Click to collapse
Ok..I will try and then post the result...
silver2706 said:
Ok..I will try and then post the result...
Click to expand...
Click to collapse
Finally Guys..did it...downgraded VillianROM to Froyo 2.2.1...yupeee....
a) Downloaded Froyo Europe Multi File Firmware from samfirmware.com.
b) Flased using Odin..
c) Then reflashed with Stock ROM for S5830 for India...
And finally..restored back to..Froyo 2.2.1...
Good it happened to me so i wasted 1 night to figure out how to solve this.....
anyway at my mini after downgrade back to Froyo my phone got a bug, i cant install any launcher
every single one i tried (included Zeam and GoLauncher) after succesfull instal first hit on "home" button drop my fon in black screen "samsung"
and keep vibrate like this
1 buzzz pause 2 buzz buzzz one and one and one
just batery out and factory reset from recovery menu
anyone can figure out what happened?
thanks a lot
Mine also happened that. The buzzz thing. And happens ocasionaly when slide to answer a call.
And I'm now clean from factory.
Strange things happens with this device
silver2706 said:
Finally Guys..did it...downgraded VillianROM to Froyo 2.2.1...yupeee....
a) Downloaded Froyo Europe Multi File Firmware from samfirmware.com.
b) Flased using Odin..
c) Then reflashed with Stock ROM for S5830 for India...
And finally..restored back to..Froyo 2.2.1...
Click to expand...
Click to collapse
Can you little bit brief your steps? That will be great.
System version :
Version.34.177.3MB525.Retail.en.GB
APflex version :
GAS_EMEA_USAJRDNFRYORTGB_P019
Build number :
JOREM_U3_3.4.2_177-3
Android version
2.2.2
Full SBF :
http://www.mediafire.com/?op47dv8yo8iypj1
rachit2588 said:
ok uploading will update the links here
Here is the full official UK rom http://www.multiupload.com/GK4V4ICBIK
No problems with haptic feedback, all working fine.
Flash via rsd lite ...but before that do complete factory wipe / erase data /cache etc etc
Here is the nandroid and fixed sbf :: http://www.multiupload.com/YZTSVZ2OJ3
first restore the nandroid via Custom Recovery and flash the fixed sbf.. as usual procedures
Click to expand...
Click to collapse
Yay! Thanks.
Ah, magnificent. Thanks.
Sent from my GT-I9100 using XDA Premium App
Good job, thanks so much.
I was sick I let it through my fingers when I updated!
Thank you, I have been waiting for this ;0)
the file in the archive is dated 14.04.2011... it's genuine GB SBF?
anyway, thanks!
Downloaded this file by MSU
it's genuine GB SBF
Hi,
I have run Recuva over my file system. I could not recover the sbf, but the file name, modified time and size were found.
They match perfectly the file I downloaded from mpieq.
Cheers, as far as I'm concerned that is the real thing.
Olly
Works great! Thanks very much.
Now then... who is going to produce a theme so it looks like leaked / 2.3.3 that wouldnt work with the unfortunate green camera devices?
Andy
Was on early 2.2.1 - wanted to upgrade in case of warranty issues.
Flashed with RSD Lite. New Red Motorola logo with white rings when phone starts, but had to pull battery and re-boot manually.
Phone is upgraded with all contacts, settings etc as before.
Just had to root phone with superoneclick to get Titanium back-up and SetVSL running.
30 mins start to finish. Many thanks
NickAJ said:
30 mins start to finish. Many thanks
Click to expand...
Click to collapse
You're luck. After upgrade mine boot up but with all settings and apps restored, however it after rooting it wasn't stable. Got to do factory reset and... for a first time used TiBu to restore my apps - works flawlessly . The only issue was the lack of Polish Swype (got it with Eclair) but used the one from CEE ROM and it works flawlessly.
mine simply has lost his Haptic Feedback... it must be restarted to gain his capabilities restored. is losing also his WiFi (with error message in wifi and network settings) and the data connection...
any ideas? could be from the JuiceDefender wrong resources management?
I am on motorola defy with formware version 2.51.1. If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Does it have blur is without Blur, I ma looking for something without Blur.
With Blur or without Blur?
Sent from my Toilet using Motorola DEFY.
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
croxley said:
I am looking for without Blur.If I upgrade to this will I lose my root, if I lose root can this be rooted by SuperOneClick.
Click to expand...
Click to collapse
This ROM is blurred. I flashed it over 2.2.1 (the UK 3.4.3-11 ROM), which I had previously successfully rooted via SOC (in fact, an older version, from months ago), but, as, at first, for strict test purposes, I decided not to wipe anything at all after flashing this ROM, the root condition (just like all my applications and settings) was kept as it was before. My Defy is in this very state ever since.
By the way, I haven't noticed differences between the two ROMs.
Just my 2 cents...
Regards,
Carlos
i have installed the full sbf
no problems with haptic feedback.
all looks fine and smooth..blur is also working nice ..even you can skip the setup.
just the 3g gets stucks up when the phone is idle..(the "H" is shown but the arrows ↑↓ are greyed out ..i have to reconfigure the apn and set it again to get it working.
Guys ne thoughts on this 3g problem..?? i have used defy baseband to switch my baseband for india.
EDIT :: solved the problems....i think this is problem free blur rom so far ...!! kudos to motorola uk..!!
note :: i didnt download from any links given here..i had some other source.
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
If I wanted to go from the Korean 177 base sbf with cm7 rc1 installed to this what would be the procedure? Is it as simple as doing it through rsdlite or through the 2nd init recovery?
Thanks
Sent from my MB525 using XDA App
ifu said:
Their is some problem with the link? I have tried to download 3 times, but corrupt file...
Click to expand...
Click to collapse
Should i upload nandroid / full sbf for you..??
Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
I9003XXPN
Kernel Version: 2.6.35.7-CL482273 [email protected]#1
Version build: GINGERBREAD.XIKP2
Click to expand...
Click to collapse
marvin_kk said:
Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
Click to expand...
Click to collapse
Now, Do you want a guide on how to re-flash back to Gingerbread using ODIN? If so,It is here. And, I would like to tell you that on re-flashing the FW, you are going to void your warranty and you will be able to get rid of the CWM
Hope it helped you!
hi OP
I'm facing the same problem as you, right now waiting for dxkp9 download and reflash with Odin.
But if you somehow manage to solve this issue please share.
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
marvin_kk said:
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
Click to expand...
Click to collapse
+1 [Reflash, and CF-root without 'extras' and restore]
I have root my S4 (I9505) and also transformed it to S5 and after a few days the Bluetooth is not turning on (I have stock/official rom).
Any help please?
anorthosis said:
I have root my S4 (I9505) and also transformed it to S5 and after a few days the Bluetooth is not turning on (I have stock/official rom).
Any help please?
Click to expand...
Click to collapse
What specifically installed on the device?
Tamerlan2009 said:
What specifically installed on the device?
Click to expand...
Click to collapse
http://www.androidpit.com/how-to-transform-your-galaxy-s4-into-an-s5
anorthosis said:
http://www.androidpit.com/how-to-transform-your-galaxy-s4-into-an-s5
Click to expand...
Click to collapse
put the default settings
Ok thanks. I will try it.
I'm facing the same problem too... last week only i rooted my phone and installed CWM recovery...then i installed Custom Rom's like Hassan ROM, Omega ROM, Cyanogenmod 11 Rom, Pacman ROM etc etc just to check various Rom's and their features out.....At first i installed only one ROM at a time and den also dual booted two ROM's by romswitcher...While i was checking my phone once i discovered that my phone's Bluetooth is not turning ON...The toggle is only becoming light green and also from the settings its only showing turning Bluetooth On but it's unable to turn bluetooth On.....Now i googled my problem and read across various forums for solution...I tried various things also flashed my firmware to stock samsung but still bluetooth does not turn On...also i flashed with stock samsung firmware of feb and march 2014 and updated my phone over OTA but still the problem persists....i even installed latest perseus kernel while rooted but still could not turn my bluetooth ON.
I would be very grateful if someone can help me solve my problem and help me Switch ON my bluetooth as it is very needed aspect for my daily use.
My Version of S4 is i9500 with android kitkat 4.4.2. Also all my other features are working normally on custom ROM's too.
suhasdutta said:
I'm facing the same problem too... last week only i rooted my phone and installed CWM recovery...then i installed Custom Rom's like Hassan ROM, Omega ROM, Cyanogenmod 11 Rom, Pacman ROM etc etc just to check various Rom's and their features out.....At first i installed only one ROM at a time and den also dual booted two ROM's by romswitcher...While i was checking my phone once i discovered that my phone's Bluetooth is not turning ON...The toggle is only becoming light green and also from the settings its only showing turning Bluetooth On but it's unable to turn bluetooth On.....Now i googled my problem and read across various forums for solution...I tried various things also flashed my firmware to stock samsung but still bluetooth does not turn On...also i flashed with stock samsung firmware of feb and march 2014 and updated my phone over OTA but still the problem persists....i even installed latest perseus kernel while rooted but still could not turn my bluetooth ON.
I would be very grateful if someone can help me solve my problem and help me Switch ON my bluetooth as it is very needed aspect for my daily use.
My Version of S4 is i9500 with android kitkat 4.4.2. Also all my other features are working normally on custom ROM's too.
Click to expand...
Click to collapse
Did you fully cleaned your phone before coming back to stock ?? i had one this problem and all i did was full wiping the phone /Data + /System etc and flashing a stock samsung rom and everything was working well
Rami_Debab said:
Did you fully cleaned your phone before coming back to stock ?? i had one this problem and all i did was full wiping the phone /Data + /System etc and flashing a stock samsung rom and everything was working well
Click to expand...
Click to collapse
yes i did full wiping including cache partition, boot, sysytem, data, sdcard, cache, and dalvik cache also...after that i installed back my stock firmware....the phone came back to original mode with OTA working well and totally unrooted but still bluetooth didn't switched on!
Flash modem
suhasdutta said:
I'm facing the same problem too... last week only i rooted my phone and installed CWM recovery...then i installed Custom Rom's like Hassan ROM, Omega ROM, Cyanogenmod 11 Rom, Pacman ROM etc etc just to check various Rom's and their features out.....At first i installed only one ROM at a time and den also dual booted two ROM's by romswitcher...While i was checking my phone once i discovered that my phone's Bluetooth is not turning ON...The toggle is only becoming light green and also from the settings its only showing turning Bluetooth On but it's unable to turn bluetooth On.....Now i googled my problem and read across various forums for solution...I tried various things also flashed my firmware to stock samsung but still bluetooth does not turn On...also i flashed with stock samsung firmware of feb and march 2014 and updated my phone over OTA but still the problem persists....i even installed latest perseus kernel while rooted but still could not turn my bluetooth ON.
I would be very grateful if someone can help me solve my problem and help me Switch ON my bluetooth as it is very needed aspect for my daily use.
My Version of S4 is i9500 with android kitkat 4.4.2. Also all my other features are working normally on custom ROM's too.
Click to expand...
Click to collapse
If you flash omega ROM and follow instructions correctly you have to flash modem which is not part of the main ROM
Geoxx said:
If you flash omega ROM and follow instructions correctly you have to flash modem which is not part of the main ROM
Click to expand...
Click to collapse
yups have flashed modem too from omega files
suhasdutta said:
yups have flashed modem too from omega files
Click to expand...
Click to collapse
Try The Solution I Gived You In Omega Thread
Let me Know iF iT Works
Sent From My MobiLe Phone
Hello! People please help. I'm not working WI FI and Bluetooth. He rarely worked after a successful restart on cyclic sink firmware 4.2.2. I'm sick of this, I decided to reboot and flash it on a stable firmware version 2.17. But why is the drain is not working 2.17 NFC WI fi Bluetooth. Then again I pierced it at 1.12, 1.14, 1.17. But there again repeated cyclic restart, but it is not working WI FI Bluetooth, NFC for work. I can not understand the smartphone fully working, why stop vayfay and bluetooth does not work? Read all forums and many of the same problem with not working Wifi and Bluetooth. Prompt, whether there is a solution?:смущенный: Smart SONY XPERIA L
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
got any solution?????
RocketboyKing said:
Same Problem.... it worked for me after flashing cm 12 for some weeks then it stopped again.... need help... can't live without wifi......
Click to expand...
Click to collapse
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)
n78 shadow said:
I couldn't understand the question clearly .
Could explain it to me??!
If the WiFi didn't work after flashing the latest firmware I think you should Check the ftf file maybe it's not for c2105 (or you mobile model) COZ I read that the different between these two devices is just networking, So get the suitable one for your device model(if this was the question)
Click to expand...
Click to collapse
Model- C2104
At first everything was working fine in original firmware ,
Even after flashing cm12.1 everything was fine,
once updated to cm13 later there is a problem of wifi and bluetooth sometimes it works fine and at some point mobile will reboot by itself later on both wifi and bluetooth doesn't work (They cant be turned on)
I re flashed original firmware,
re flashed cm12.1,Even tried many roms (Thunderzap,Resurrection_Remix,Temasek) but still problem remains same.
sidbi said:
Model- C2104
At first everything was working fine in original firmware .
Click to expand...
Click to collapse
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal
n78 shadow said:
Try this it may work:
First of all try to change the ftf file (download other one)
If didn't work flash this boot.IMG via fastboot on stock ROM just on stock ROM.
After flashing it flash the kernal and Fota kernal from the same ftf via flashtool .
As I told you flash it on stock ROM then flash the kernal and the fora kernal
Click to expand...
Click to collapse
Can you please provide link of all three please. (which kernels should i flash)
sidbi said:
Can you please provide link of all three please. (which kernels should i flash)
Click to expand...
Click to collapse
For boot.IMG click on this word with yellow color.
For the ftf
Http://www.mediafire.com/?yiak3ktb3m58iwd
Thanks to @Joel16 for the link
I mean by kernal the kernal in the ftf exclude everything while flashing in flashtool except the kernal and the fota kernal
I'm having the same issue. But it started out of nowhere, so I'm guessing its a hardware problem.
After it happened, I flashed almost every kind of ROM and Kernel around here. Nothing worked.
Also I flashed the official Sony's firmware for my country and it still not working.
Tried the PC Companion's repair function, didn't work too.
When I try to turn WIFI on, I get a "fail to load wifi driver" message at logcat.
I'm not new into flashing ROMs, so I'm almost sure it is not a system issue despite the error message I get.