Database Info

Bluetooth turned on when calling

A weird thing has happend to my Magician - Bluetooth, which I don't use very much, gets turned on whenever I call out. It seems like this started to happend after I fiddled around with BT tools (now uninstalled).
Any tips on how one can fix this?

the coz of Pocket Bluetooth Tools ,it turn bluetooth ON automaticlly when u call or recived call, if that bother you install the previous version 1.0.1.2... 8)

Yup, that's one of the settings - one of the better features - of Pocket BT Tools.

What is the advantage with that? For a headset?

yes

The automatic turning on of Bluetooth, is not a good feature, though it might be if there was an option of turning this feature off.
I found that the automatic turning on off Bluetooth uses up your battery power much faster as you never remember to turn the Bluetooth off.

huh ?
my bluetooth tools turn bluetooth off again after the time set for it to autoturn off you know that clock in the today part of bluetooth tools
if you play with a regeditor you can set the time 100% yourself

Bluetooth turns off randomly

Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!

Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.

Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!

Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work

try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box

Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!

Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.

same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.

Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.

I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?

I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.

I have the samen problem with my HTC Touch Pro and Saab.

bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!

ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???

I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.

try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html

[TIP] Improve Audio Quality of Calls or Music Over Bluetooth on the Captivate

I have been having intermittent issues with Bluetooth audio cutting out on my Captivate while I am on a phone call over Bluetooth. I believe the problem stems from Samsung's inability to do anything right and their implementation of Bluetooth 3.0. A new feature of Bluetooth 3.0 is the ability for a Bluetooth connection to transfer data over Wifi if both Bluetooth devices support 3.0 and have compatible Wifi chips. Samsung implemented this poorly, not a real surprise, and now Wifi is causing the Bluetooth data transfers to be spotty causing streaming data, voice calls or audio streaming, to to be adversely affected.
I was able to finally narrow down the problem. I received a phone call yesterday on my cell phone and I picked up the call on my Bluetooth enabled home phone. The call sounded horrible, noise and the other caller was cutting out, but not enough that I couldn't understand the other person, so I continued the call. The person on the other end did not seem to have any idea that the call sounded so badly, so it seemed to be something limited to my end. During the call, I went over to my Captivate and turned off Wifi. Instantly, the call cleared up and the quality was good to excellent.
I use Wifi all of the time especially at home, so I wasn't going to be turning off Wifi all of the time, so I needed a workaround. Using an App called Setting Profiles, I am able to have Wifi automatically turn off anytime I am on a call and then when the call is completed it turns Wifi back on. What's even better is that the app will note the state of Wifi before a call, so if Wifi is already off before a call, it will not turn Wifi on when the call is ended. The Tasker app will allow you to do the same thing, so if you already have Tasker you won't need Setting Profiles.
This tip will probably only work on the Samsung Galaxy S line because these phones use Bluetooth 3.0, where most Android phones use 2.1 or earlier and do not support Bluetooth file transfers over Wifi. I have only experienced it on the Captivate so I can't say if it will work for any other Galaxy S phone.

Since both wi-fi and BT uses the same 2.4Ghz frequency, interference maybe anticipated although new BT hardwares are pretty good at reduce such interferences.
Did you try change your wi-fi router frequency/channel so that it won't interfere with your BT? Try that so that you may not need to turn off wi-fi on the phone at all.

I have had the issue occur in my car while not near any Wifi router. Also, the router was still on when the call quality improved. It's not like the radio waves from the router and three other Wifi devices in my house disappeared around my phone just because I turned off the Wifi on my phone.
Sent from my SAMSUNG-SGH-I897 using XDA App

Thanks for the tip

Cannot use Bluetooth on WiFi

I had a similar problem on CM ROM's on Mt4G, but that was because of poor strength of WiFi in CM kernel - it would disconnect the WiFi.
With G2X, it stays connected, and the Bluetooth is connected when on WiFi calling, but sound only on the device - not through the bluetooth. Calling on Network - Bluetooth works fine.
I am in home office, so use WiFi most of time.
Another issue - but probably not the G2x- Google voice dialing really sucks. Also was the case on MT4G - used Dragon Diction/Genus App - much better. Trying a market app, but not as good as D&G.

Works for me. I turned Bluetooth on first, and then Wi-Fi calling.

i syned my earpiece to BT had to restart the phone now it wont pair or find the device when i hit scan

BarryH_GEG said:
Works for me. I turned Bluetooth on first, and then Wi-Fi calling.
Click to expand...
Click to collapse
May not have tried it that way yet - will give it a whirl.

I have a similar issue relating to bluetooth and wifi...here is my issue:
If I have both BT and wifi tether on it works, but as soon as i turn off WiFi tethering none of my BT devices will connect untill I reboot

I am also having trouble with my blue tooth. I use a handsfree device in my car. It syncs the blue tooth but seems to mute the sound. It doesnt work.

Bluetooth issue in car: Stock ROM vs non-stock ROM

Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.

nickelnine said:
Hi all,
I have a 2008 vehicle in which Bluetooth seems to be a problem depending on which ROM I have installed on the device.
I'm currently on Android 9 OB 7 and Bluetooth connects and stays connected through incoming and outgoing calls. Works flawlessly.
However, with for example Lineage (among others), the Bluetooth pairs, but connection drops soon after or drops after the first call with the car stereo showing "Net Search", meaning the car BT lost service but the phone Bluetooth is still connected. I've tried restarting and resetting network settings but no luck at all. Changing dev options doesn't work either.
I'm thinking it could be a Bluetooth stack difference?
Is there a way to replace the lineage Bluetooth with OOS?
There is no bluetooth.default.so file that I could find
Any help or direction is appreciated.
Click to expand...
Click to collapse
I am having the same issue with 9.0.2 OOS. So not sure if this us a compatibility issue with more than 1-2 years old vehicles or something else? Glad to hear that OB7 is working fine for you. Hope fix is coming soon. It's simply annoying.

I am having car connection issues as well. I have a 2010 Ford Edge. Just moved from Sony Xperia XA1 Ultra on Orea to my first OP device - OP6 Pie 9.0.2 - I can connect to my car initially but once I turn off my car, I have to go through a series of reconnect steps. I called tech support and we spent about 45 min troubleshooting - of course I was told I was the only one who had complained of this issue - anyway no resolution. The only way I can "reconnect" is to go into my car's system settings and select "connect to BT device" then toggle bluetooth off and on in the phone - sometimes this works with the first go, other times I have to repeat this cycle 5 or 6 times. Simply selecting "previously paired devices" in the phone app doesn't work either.
Really a pain in the tush, because I am usually in a hurry and don't have time to go through all this scenario to get a connection.
On the other hand, I have a bluetooth ear piece (made by Samsung that is like 5 or 6 years old) that reconnects every time I turn it on, no problems.

Car connections too but was not present in omni

I found for stock, performing a network reset (mobile, wifi Bluetooth) then restarting the device fixed the Bluetooth connection issue.
For custom non-stock ROMs, for my issue at least, I found its not a Bluetooth issue at all but rather the mobile network drops and the car Bluetooth cannot reconnect. The same network reset as above does not work but what does work is toggle off the "automatically select network" and manually select the mobile network from the menu that pops up. This keeps the mobile network intact (until the next device reboot, at which point repeat the steps) with the car and all is good.
I only figured it out by accident; hope this helps others.