Database Info

[Q] S4 like alpha8 cm10.1 stability issues Lolation

I just installed the cm10.1 a8 s4 like ROM by lolation, I have upgraded from dhiru's cm10.1 a8, which had worked perfectly well on my device. But , after upgrade to s4 like ROM following precisely, all the instructions, I find the ROM to be very unstable, it gets switched off on its own time and again, please find a fix. Ty..

installed 2.0.2
Just installed the new 2.0.2 version which was released just yesterday.. I hope it fixes the SOD issue..

Im not facing any sod in every alpha8 based roms i tried. May be is flashing procedure what causing issues.
Sent from my GT-I9003 using xda premium

Hi to all
At present I have "Like-S4-v1.0.2" on my I9003. I'm very impressed: it works like a charm. The only drawback is battery consumption on 3G.
Now, I would like to install the latest version of this fantastic firmware (2.0.2) but I don't know whether to follow instructions related to "Already CM10.1 base" or "On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB". Can someone help me? Thanks a lot
Already CM10.1 base
- Wipe data factory reset
- Mounts and Storage > Format /System
- Flash Like S4
- Wip Cache and Dalvik Cache
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader) reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin) reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin) reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
- Mounts and Storage > Format /System
- Like S4 in recovery
- Wip Cache and Dalvik Cache

The second instructions.
cacodemon79 said:
Hi to all
At present I have "Like-S4-v1.0.2" on my I9003. I'm very impressed: it works like a charm. The only drawback is battery consumption on 3G.
Now, I would like to install the latest version of this fantastic firmware (2.0.2) but I don't know whether to follow instructions related to "Already CM10.1 base" or "On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB". Can someone help me? Thanks a lot
Already CM10.1 base
- Wipe data factory reset
- Mounts and Storage > Format /System
- Flash Like S4
- Wip Cache and Dalvik Cache
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader) reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin) reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin) reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
- Mounts and Storage > Format /System
- Like S4 in recovery
- Wip Cache and Dalvik Cache
Click to expand...
Click to collapse
Like s4 1.0.2 is a 4.1.2 jb ROM, hence it is not a cm 10.1 base, you are on a cm 10 base, you need to follow the second set of installation instructions with the help of Odin. Gl! I have installed the like s4 2.0.2.. And got rid of sod's it is a very smooth ROM with some minor nigels, especially battery life, and the swipe action in default android keyboard doesn't seem to work.

Switch from cm10 to cm10.1 base not necesary to go back to gb cuz they have the same partitions. If you are in cm10 base flash cm10.1 alpha8 by dhiru first and then flash like s4 2.0.2 for sure you dont have any problem.
In other way, doing a clean flash (full ddlf2 with pit/cm10.1) always is better to prevent possible issues.
I did both ways and can say clean flash is better but you are free to try your way.
Good luck!!!
Sent from my GT-I9003 using xda premium

[Q] Help me pls ! Urgent !

i m using samsung galaxy s2,
just now i update my rom to wizzedkat v3.3 rom( galaxy s5 rom), but now i wanna restoring it back to my stock rom, i wipe data n cache then i restore it back to my older rom using CWM , there write Restored Complete, then i reboot it, but it now hang on samsung boot animation there and the animation always keep on repeat
Can you guys pls give me some suggestion or any solution to this? thanks

hoezhonghan said:
i m using samsung galaxy s2,
just now i update my rom to wizzedkat v3.3 rom( galaxy s5 rom), but now i wanna restoring it back to my stock rom, i wipe data n cache then i restore it back to my older rom using CWM , there write Restored Complete, then i reboot it, but it now hang on samsung boot animation there and the animation always keep on repeat
Can you guys pls give me some suggestion or any solution to this? thanks
Click to expand...
Click to collapse
a solution can be found here.

Problem with Boot

Hi everyone. i have flashed custom rom on my galaxy tab 2 p5100 but it stacks on boot animation.
i have tried 5 different rom but there is same
i have looked threat on forum and there was tip to wipe catche and dalvik but it didn't worked
what can i do now?
i dont have stock firmware file to flash with odin

I think you are using outdated recovery

How to do a Clean Wiped and install a fresh STOCK ROM on Samsung galaxy s5

Please i will like to know how i can do a Clean Wiped and install a fresh STOCK ROM on my Samsung galaxy s5, should i make use of the Nand Erase All option in Odin or not, thanks.

You could flash a custom recovery on your device, such as TWRP, and from there go to the wipe button, swipe the bar at the bottom and then install the fresh stock rom

casharena said:
Please i will like to know how i can do a Clean Wiped and install a fresh STOCK ROM on my Samsung galaxy s5, should i make use of the Nand Erase All option in Odin or not, thanks.
Click to expand...
Click to collapse
Go to Sammobile .com or samsung-updates .com and use your model number to find your stock firmware for your region/country then flash it with the newest version of Odin with default settings, just place the firmware file in AP slot, leave the options alone and click start, wait for it to flash and reboot.
If it bootloops, pull the battery and put it back in then boot to stock recovery and factory reset/wipe data and wipe cache and reboot, you should be fully clean on a fresh stock ROM.
Sent from my SCH-I535 using Tapatalk

I did everything,but still boot looping
what do I do
<I am using a Samsung galaxy j5 SM-G900K>
please help me out

Phone stuck in samsung galaxy s6 logo after flashing nemesis rom nougat

Can someone please help me on this matter.
My previous ROM was XtreStoLite
my phone is a samsung s6 g920f
I downloaded the new ROM nemesis and flashed it in recovery using the latest version of TWRP, I followed these steps
Wiped dalvic cache,system and cache
Installed the new ROM
reboteed the phone
Now it's stuck in the samsung galaxy s6 screen
Please help me,thanks

try going to recovery again and wipe cache and dalvik

cpu2007 said:
Can someone please help me on this matter.
My previous ROM was XtreStoLite
my phone is a samsung s6 g920f
I downloaded the new ROM nemesis and flashed it in recovery using the latest version of TWRP, I followed these steps
Wiped dalvic cache,system and cache
Installed the new ROM
reboteed the phone
Now it's stuck in the samsung galaxy s6 screen
Please help me,thanks
Click to expand...
Click to collapse
Wait for 30 to 40 mins. If it will really not boot then go back to stock ROM, install TWRP, root then reflash Nemesis ROM.

Cronus said:
Wait for 30 to 40 mins. If it will really not boot then go back to stock ROM, install TWRP, root then reflash Nemesis ROM.
Click to expand...
Click to collapse
SO it didn't work, it stuck at the same screeen. I went back to xtreStoLite.
Do i really have to go back to stock to get to nougat?
If so, what's the best way to do this for my phone please?
thanks