Database Info

[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 V2.5 #4325 Froyo USB Flashing ::

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This guide is for:
SuperPad / Flytouch2 / WWE10 Tablets
Make sure you've got the right device.
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 256MB RAM
- It has 2GB Internal Storage
- Android OS 2.1
- Have 2 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X210 Processor
This ROM is NOT for you if your device is SuperPad 2 / Flytouch 3
- Infotmic 10.2" Flytouch2 SuperPAD
- It has 512MB RAM
- It has 4GB Internal Storage
- Android OS 2.2
- Have 1 MicroSD Card Slots
- 1024x600 Screen Resolution
- Infotmic X220 Processor
-------------------------------------------
Warning: Follow these steps. All of them. If you do, it will work. If you misread or miss a step or skip a step because you are hurrying through the process, it WILL brick your tablet. Flashing is a relatively simple process but it requires patience. If you don't have the time to read all of the directions and follow them, YOU DO NOT HAVE TIME TO FLASH, and stick with your old firmware.
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK! SINCE THERE ARE SO MANY CLONES OF THIS TABLET, DON'T EXPECT IT WILL WORK PERFECTLY.
-------------------------------------------
Note: I'm not so good in English and grammar, so bear with me. The images is not so clear co'z im using webcam for fast capture and focusing.
If I made mistakes, corrections are welcome.
:: Super Improvement ::
- Much Faster response, you will notice playing Angry Birds is smoother.
- New Default Application updates
- New Icons
- New 3D Gallery
- Supports Flash on browser.
- GPS is now working, GPS app required to test the satellite lock.
- Youtube on browser working fine if you have fast connection.
:: Known Issues ::
- "Some" RJ45 (Ethernet) Port sometimes not working
- "Some" WiFi unstable
- "Some" 3G Device not working
- Market is still free, no paid apps.
- Save path not on MicroSD but inside your Tablet (fixed)
- When it sleeps, it sleep to power off.
- Youtube App is not working, you need to download another compatible version.
:: Thanks to the Donors ::
- Austin Pc Fixed .Com
- frank rugolo
- pastorb1
:: Credits ::
- stragulus
- dgcruzing
- isergio
- _barsuk_
- Aries on an Android (android tablet forum)
- rgocal (android tablet forum)
- and others who I forgot to mention
This guide is for Windows XP, I'm windows7 user before but I downgrade because I want to use my other old softwares for flashing. If you get the idea you can do this also on windows7.
------------------------------
NOTE:
- For windows7 user Run As Administrator the IUW application.
- 64bit Operating System may not work with IUW application.
------------------------------
NOTE: If your tablet showing version 6.1.5 (559[or higher]) or 0.6.1.2(587) Then you can skip some part of the guide. Scroll down directly to the "Alternative Solution" using MicroSD burning. You still need to download the Android 2.2 Froyo Main Firmware.
------------------------------
:: Preparing the Male to Male USB Cable :: (if you have one skip this)
Ok let's start, what you need is a male to male USB cable, if you don't have one you can make your own male to male cable.
Tools
- 2 USB Cable
- Scissor or Cutter
- Electrical Tape or anything to cover the exposed wire
- Solder Lead (Optional)
- Soldering Iron (Optional)
1. Cut each USB to the nearest tip of the female, to make your USB cable longer.
2. Cut each end of the USB to expose the wires and copper wires.
3. Now you can connect each end of the USB, and twist each wires, you can solder it if you like.
4. Now you can tape each wires, and tape all the wires.
This is the finish product.
:: Preparation for Files and Flashing Procedures ::
*Note: Please PM me if there are missing links.
Download IUW 1.1 Flashing Tool
Download Firmware V2852
Download Uboot - V 0.6.1.2(587) working camera
Download Main Android 2.2 Froyo ROM with Flash 10.1
Download New Ramdisk image to change the path of save files to SDCard1
Download Extra Tools Apps
Updated ROM: 25.11.2011
Download Firmware Froyo 2.2 v2.5 #4325
------------------------------------------------------------
:: Clean up the tablet files ::
- Wipe cache partition
- Wipe data/factory reset
- then reboot.
Remove all microSD so that it will not start burning if you have firmware on your microSD.
Visit this link how to clean the data for your tablet.
------------------------------------------------------------
:: Let's Start ::
1. Make a Folder on your desktop for fast track of your files, I named it Froyo 2.2 and save all your downloaded files here.
2. Download IUW Flashing tool, and save it inside the folder of your desktop.
3. After download, unpack it inside the folder.
NOTE: Your tablet should be full charged, and connect the charger while flashing, just to make sure it will not drain much power on your tablet. Don't forget also to remove all your MicroSD cards from the tablet.
4. Since your done making your USB Cable, your tablet should be off and plug the other end USB to the PC and plug the other end on your tablet USB Port between the headphone jack and SDCard Slot 1.
5. Open the IUW application, select Link USB on the left side. And on the Link information the DV (driver) is greyed, because it's not detecting the tablet with driver.
6. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC..."
7. A New Hardware notification will pop up on your PC Screen.
(you have 2 minutes to setup this or the tablet will boot normally)
Select Advance, Next.
Browse the driver from your desktop inside the folder "otg_driver"
Then it will install the driver.
The flasher will turn to green.
:: FLASHING V2852 ::
This rom will only run on tablets which display a version number in the bottom-right "Infotmic" screen when first turned on.. If yours doesn't display a number there, you will need to flash firmware v2852 first.
8. 'Choose a wrapped image' press the "..." button Select the IUS file "WWE10B_Android_393477-v9full.ius"
9. Click 'burn' to flash the tablet.
This picture is flashing the tablet.
10. After burning finishes, plug out the USB cable and press Reset, then restart the device.
:: Flashing UBOOT ::
11. Open UIW application, and connect your tablet USB to PC.
12. Select "Link USB" on "USB Mode:" select "Expert Mode" Uncheck all except "UO".
13. Browse the "u-boot-nand.bin" the one with working camera.
14. After flashing this is the result.
15. Your screen with start to flicker, it will start to initialize.
16. I will take time to load up, until you are in display calibration.
:: Flashing IMAGES ::
17. Power off your tablet, and prepare again the UIW to flash the main android 2.2 firmware.
18. Click Link USB, and select Expert burn.
NOTE: Use the other Ramdisk.img fix you download, not from the flash10.1-android2.2 folder.
19. Power up the tablet with this combination Power + Menu button for few seconds until you see the message on your tablet "Communicating with PC...", if the Dv is green your ready and click the burn button.
20. I will take time to load up, until you are in display calibration and your Done!
:: Alternative Solution ::
If you cant burn the main android image using USB method. You can try the MicroSD card method, but this is only applicable if your tablet will display the version under the InfoTMIC start up logo.
Lets make a bootable MicroSD, to convert the file size to 700~705MB, you need a MicroSD at least 1GB.
Download WinHex with MicroSD Clone Image.
1. Open your WinHex
2. Click Tools->Disk Tools->Clone Disk->
3. On Source Raw Image: click the file button.
locate the "aben.start sector" file, click open.
4. On Destination Medium: click the drive button.
locate the Physical Media of your card reader/MicroSD, ok.
5. Fill in the Start Sector with 0 (zero).
6. Click OK, and WinHex pop up will appear, click OK and it will start cloning the image file to your MicroSD.
7. A notepad will pop up that you are done cloning the image, close and press OK on the pop up message.
8. Close WinHex, and safely remove the card reader/MicroSD.
9. Plug the card reader/MicroSD again, and do a quick format.
10. If you successfully formated the MicroSD to 700~705MB then create an "android" folder, and copy all the main image files on the folder. And your Done! :: If you fail there are some other reason, some card reader is not working properly, try to find another card reader, if your phone has MicroSD Slot and able to communicate and serve as card reader, you can use this also.
- ramdisk (use the other ramdisk you download)
- system
- uImage
- userdata
some optional or skipped file.
- u-boot-nand (android v2.2)
- zSYS (Flytouch Official Image 3245)
This is what's inside the MicroSD on android folder.
12. After copying the files plug the MicroSD at the top most/Slot 1 between the 2 USB port.
13. And Power On your Tablet, and it will start Flashing just like here on the video. http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
You can also use this MicroSD to downgrade back to 3245 firmware.
Thank you.
Don't forget to click the Thank You button
joshgabel said:
SmaRkieS whats your Paypal email address? i owe you $ worked like a charm!
Click to expand...
Click to collapse
Confirmed that the 3G USB modem Huawei E1752 is working perfectly. Just create an APN and reboot while the Huawei E1752 is in the USB port.. After startup it makes a connection and works fast!
manually created an APN in settings/connections/mobile providers and configured for your local provider. Also enabled data connection, otherwise I won't start searching. After that reboot and it started working. No specials actions required.
:: Google Sync ::
If you want to sync the calendar (basic) and contacts go to:
Contacts-> Menu-> Accounts-> Add Account-> Corporate-> enter data for a google account -> choose the default setting -> set the sync options-> Enter the name
:: z4root USB Debug solution ::
1. Download Launcher Pro.
2. Install Launcher Pro.
3. Tap the Home Button at the upper left, it will let you choose different type of launchers.
4. Select Launcher Pro.
5. Tap Menu Button = or at press the menu button at the top of your tablet.
6. Tap the + add
7. Tap Shortcuts
8. Scroll Down, and Tap the Activities.
9. Wait it will load, scroll down to Settings.
10. Scroll down and look for Development.
11. Press OK without changing the name.
12. On Desktop/Home Tap Development.
13. Check the USB Debugging.
14. Restart if necessary.
15. And your done ready to root.
:: Enabling Live Wallpapers ::
1. After rooting your device, your good to go.
2. Install Busybox Installer.
3. Open Busybox Installer, OK, SuperUser request Allow.
4. If BusyBox is not found, tap Install.
5. Press Back Button on your tablet.
6. Install Terminal Emulator.
7. Open Terminal Emulator.
8. Type this commands.
Code:
su
mount -o remount,rw,codepage=utf8,vfat,xattr,check=no /dev/stl5 /system
cat /sdcard/LiveWallpapersPicker.apk > /system/app/LiveWallpapersPicker.apk
cat /sdcard/libRS.so > /system/lib/libRS.so
cat /sdcard/librs_jni.so > /system/lib/librs_jni.so
sample pic of my terminal emulator, I made a mistake in line 5 but it's ok just retype it.
9. Reboot your tablet.
10. Install your live wallpaper apps.
11. On your home screen, tap the menu button. (near the volume next to back)
11. Tap Wallpaper
12. Tap Live wallpapers
13. Select your live wallpapers, and your done.
sample screen shot.
:: GPS Configuration and Setup ::
Download GPS Test Tool
1. Install that app in your tablet.
2. Go to Settings
3. Go to Location & Security
4. Check Use wireless networks
5. Check GPS Satellites
6. Plug your GPS Antenna.
7. Take your antenna outdoor, if the wire is still long try to place the antenna higher.
8. Connect to your WiFi.
9. Run the GPS Status application.
10. Wait for 5~20 mins for satellite discovering and locking.
11. Wait for 5 satellite lock on and you are done.
12. Run your Google Maps, and your locked to your location.
This is the picture number of satellites and number of locked satellites.
The GPS is very accurate.
:: Dismantle/Dissemble of Superpad/Flytouch2 ::
http://www.androidtablets.net/forum/gome-flytouch-ii/14255-inside-my-superpad.html
===========================================================
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.
Other Useful Guides here.
http://forum.xda-developers.com/showthread.php?t=1067746
http://forum.xda-developers.com/showthread.php?t=1048776
http://forum.xda-developers.com/showthread.php?t=831178
-------------------------------------

Good work
25-12-2012 -updated links
Download IUW 1.1 Flashing Tool iuw1.1-english.rar - 291.98 KB
Download Firmware Froyo 2.2 v2.5 #4325 - 4325.zip - 212.16 MB
Download Uboot - V 0.6.1.2(587) working camera u-boot-nand.zip v0.6.1.2(587).zip - 130.13 KB
Download New Ramdisk image to change the path of save files to SDCard1 Ramdisk_SmaRkieS.zip - 166.06 KB
Barsik recovery for superpad flytouch - recovery_rd.zip - 1.32 MB

Thank you, cause this people are lazy enough to open the pdf/docx file instructions hehehehe.
I made some mistakes on my post, please post some corrections and suggestions are welcome also.

Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?

kolk11 said:
Thank u for your instructions. Its the first time I manually try to flash my pad so I had to flash to 2852 rom first and it does but when i restart and check my version build it is still on build 1561 (flashing with usb cable).
Tried couple of times can u help me out?
Click to expand...
Click to collapse
Can you see the version under the InfoTMIC start up logo?
If you can see it then you are ready to update using MicroSD method.

@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?

kolk11 said:
@smarkies
no there is no version number
first time I connected to pc it said found new hardware but no driver. There I selected the otg driver in the package.
Burntool does connect and goes up from 0 to 100 procent (very quick about 7 secs.) when i burn but when i check im still on my previous build.
After that I tried to update to other firmware using update.zip on winhexed sd card. This did work so now I am on 1623 build.
after that I tried again using burntool but still didnt work out.
In the folder containing the 2852 rom there are also two folders
0.6.1.2_1.4.587_OV2655 and
0.6.1.5_1.4.587_GT2005
both contain uboot and uboot nand files is there something I have to do with them before I can flash?
Any advice?
Other thing I noticed: in recovery menu there is a line saying:
e:can't open / cache / recovery / command
It didnt stop me from update with update zip but could it be the reason burntool isnt working for me?
Click to expand...
Click to collapse
dont touch any file inside the folder of 0.6.1.2_1.4.587_OV2655 and 0.6.1.5_1.4.587_GT2005.
Try to burn the UO first, u-boot-nand.bin the one with working camera, if not try this another u-boot-nand.
Then burn the Main Image Android Rom.

Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away

kolk11 said:
Thanks for the quick repy to be sure I wont Brick my Pad
for the uo file I use Uboot - V 0.6.1.2(587) or uboot - 0.6.1.5 (587)
and for the ROM files I only use files from the 20110416-v1001 folder?
If so I will burn right away
Click to expand...
Click to collapse
I abused my pad flashing many times, and still it is alive, It will brick if your USB cable is poorly made, or overpowered that will fry the motherboard of your tablet, just like what happen to other people.
the safest way to flash is microSD, but it is tricky with this froyo update that's why I risk on flashing using USB.
V 0.6.1.2(587) this one has working camera. But you can try both uboot to display the version under the InfoTMIC logo. But I use V 0.6.1.2(587) coz I want the camera to work fine.
Yes the files inside the 20110416-v1001 folder except for the u-boot-nand inside.
If the USB flashing doesnt work you can try the alternative, using the microSD.

Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz

kolk11 said:
Thank u very very much worked like a chime.
camera and wifi are working I used uo V 0.6.1.2(587)
will play with it tonight to see what else it can do now
Greetz
Click to expand...
Click to collapse
Glad you made it! Check out the speed and the Gallery is now 3D
So you did the UO burn first then Main Image?
Confirm this and I will revise my post.
Co'z I burn my tablet the other way. Main Image then UO.

Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet

kolk11 said:
Yep U0 first than main Rom
Only thing is market has only free apps
but doesnt matter can get apps all over the internet
Click to expand...
Click to collapse
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
This is my screen now.
with new virtual keyboard.
I also try swapper2, they say it can improve the performance. This is my Terminal Emulator.

IUW does not work with 64 bit
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.

quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver

Works as advertised.
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!

I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!

Jiggity Janx said:
Please add in the OP that some on other forum sites have confirmed that IUW does NOT work with any 64 bit operating system.
I will link to reference if I come across it again...
For Development USB debugging options for Z4Root, you may also want to link to my post HERE.
Click to expand...
Click to collapse
Yes, that's why I made it with Windows XP, and we are aware that 64bit OS is so choosy in terms of software compatibility.
About the USB Debugging, I already made a guide after the Flashing/Burning guide.
caravanman said:
quick tip for windows 7 users, picture 6 will not happen, at least it didn't for me, you need to navigate to devices and printers, find the unknown device, and manually install the otg driver
Click to expand...
Click to collapse
Yes, It is self understanding, there is a note above I use windows XP, but the idea is still there.
If you like to contribute for a guide in windows 7 is welcomed.
nullandvoid said:
I bricked my tab first, but got it up and running again with your step by step guide. Many thanks!
Click to expand...
Click to collapse
You are welcome, enjoy your new faster tablet.
woodeman said:
I followed your instruction for SD card and it worked perfectly. I now have the 3925 version on my Superpad and it seems to be working well. Definite improvement on Angry Birds(which I play way too much) and Home Run Battle 3D. WiFI works fine, don't know about GPS or camera as I don't really use them, but I will check just for curiosity sake Seems to be faster and I have had no random lockups that I had with the v5 I had on previously. I will report back as I use it. Thanks for all the great work!
Click to expand...
Click to collapse
Thank you so much, but I would like to suggest to remove the long quote of my post, just to make the thread clean.

SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse

kolk11 said:
SmaRkieS said:
Thank you for the confirmation.
Confirm this again.
First: WWE10B_Android_393477-v9full.ius burn
Second: UO burn
Third: Main Image burn
Check my post, applanet can help you with that hehehehe.
FOr your confirmation I directly made the UO burn and than burned the main image burn never touched WWE10B_Android_393477-v9full.ius
Where can I find your post on applanet to get market running?
Thanks in advance
Click to expand...
Click to collapse
pmed you.
Click to expand...
Click to collapse

[Guide][CM7 2.3.5][ROM][BackLight Fix for CM7] CM7 and MIUI port from Defy

This thread is outdate.New thread is here: http://forum.xda-developers.com/showthread.php?t=1239778
======================================================================================================
[Real DEV][ROM][Port][Updated: 19-Aug-2011]GB MIUI for Milestone2 All-in-one update.zip Thanks to r2beta0 !
Now dangpzanco has set up a project base on MIUI/CM7 on github, anyone who interst in it can contact with him or come here !.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you have any problem in using CM7/MIUI, before question, you may take a look at this thread.
Im not a DEV, so any tutorial and help is very welcomed. If someone can develop for it, that would be very thankful !
Any defy CM7 based/cooked/moded ROM include MIUI can use this method to boot.
Thanks to dangpzanco and r2beta0 for their great effort. And walter79 for the great idea.
Known compatible kernels：
It seems only 2.6.32.9-********[email protected]**lnxdroid**#* series kernels are supported.
2.2.2-CH include 2.10.0 / 2.6.0 / 2.5.0
2.2.1-CH 1.10.0 / 0.24.0
Known incompatible kernels：
2.3.4-CH leak
2.2.2-UK/DE,AT,CH/Argentina/HongKong/Italy
2.2.1-Mexico
2.2-Brazil/France/UK/Australia
Unknown kernels:
2.2.2-France
2.2.1-Argentina
2.2-Argentina/DE, AT, CH
This is my nandroid backup with some fix but not all, you could choose one or not.
[Recommend!]1. Based on MIUI 1.8.12 moded by Wajk, download: http://www.megaupload.com/?d=1RF2A3JC
2. Based on a cooked CM7 ROM(thanks to VIPFXY): http://www.megaupload.com/?d=NOWVXJAK
3. Based on cm7-110813-2132-NIGHTLY-Jordan.zip http://www.megaupload.com/?d=17RERZSM
Patch for CM7/MIUI ( It should work on all defy CM7/MIUI based/cooked/moded ROM ):
This patch fix the following：
1.GSM problem, you may still need to use baseband switcher to change your baseband (If you still have no signal, take a look at this,theoretically it 100% works! http://forum.xda-developers.com/showthread.php?t=1182050 )
Thanks to i7ovehope and dangpzanco
2.Keyboard mapping issue ( except ALT-LOCK, however you can double press ALT instead ) Thanks to 19900828xy
3.fix CWM issues related to /data Thanks to r2beta0
4.When you are charing, you will have your LED turn yellow to tell you, instead of nothing (Charger light still not work)
5. Gravity-sensor/light-sensor are working again Thanks to walter79 and dangpzanco
6. GPS should works
7. compass should works
And the patch does NOT include the following fix, you will need to do it yourself：
[Both CM7 and MIUI]0. Keyboard backlight fix ( Thanks to r2beta0 for fixing. Thanks to nanox_06 from grupoandroid.com. Thanks to layoroa and Motodoido and julianlatasa for telling me ):
Make sure you have apply fix_for_cm7_miui.zip from my attachment ! AND, if you have tried the earlier method （replacing framework-res.apk ), you SHOULD restore the original apk before trying this method !
[CM7]open setting>CM setting>Displayer Setting>(on)Automatic brightness>Advance mode>(on) custom>Edit other levels...
[MIUI]open setting>Displayer Setting>(on)Automatic brightness>Advance mode>(on) custom>Edit other levels...
[Wajk/r2beta0`s MIUI]r2beta0 has uploaded a moded framework-res.apk in #203, you can download it from there and replace the one under /system/framework/ . Don`t forget to set the permission to rw-r--r--. Reboot and Done !
then you will see a mass of squares. Find keyboard row and change the first 2 value from 0 to 255. Save setting. OK, done! Pull out your keyboard and you will find backlight work again.(Be sure you are in dark environment)
Tips: After turning off automatic brightness, your backlight will still work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. camera upside down ( Thanks to walter79 )
comment the line:
ro.media.capture.flip=horizontalandvertical
in /system/build.prop, make sure it is
#ro.media.capture.flip=horizontalandvertical
2. The camera noise after system booting, which exist in MIUI moded by Wajk
freeze talk.apk under /system/app
if you still need to use gtalk, try to install it from apk (not test if this will bring back the noise )
3. Stock soft-keyboard too small
Use 3rd-party keyboard app to replace it
4. Phone version shows MB525
Edit the line:
ro.product.model=MB525
in /system/build.prop to
ro.product.model=A953 //or anything you want
5. The default baseband of my nandroid backup is CH2.6.0/2.5.0
If you have no signal, please use baseband switcher to change to a suitable one or take a look at this (theoretically 100% works ) http://forum.xda-developers.com/showthread.php?t=1182050
6. If you think your flash light is a little dim compared to before. (Thanks to walter79 and below is what he said )
Be careful with that. Chinese pepole killed it with fixed-sbf for Europe Defy and in past europe people killed led with china fixed-sbf. It is related to devtree. But if your flashlight works more than 2x then you can edit your build.prop and del this:
- ro.media.capture.flashIntensity=41
- ro.media.capture.torchIntensity=25
7. SD card can NOT be mounted in recovery
In recovery, open advance, select start adbd and then kill adbd. Go back to try, and you should find your sd card has been mounted correctly. Next time if the issue appears again, just re-do it again.
8. If you have USB connection problem. Thanks to r2beta0
[MIUI] Please go to #211 for framework-res.apk. Replace the one under /system/framework/ with it.
[CM7] This is the manual solution r2beta0 post in #213
You must download apk_manager and use it to decompile framework-res.apk. Then you edit bools.xml that is inside res/values folder. The variable you must change is called config_enableUsbModeSelection, it is a user friendly name. Change from false to true. Then you use apk_manager to recompile it but don't sign. Set compression to zero.
The known issues which can NOT be solved till now:
1.Video hardware decoding is dead mostly, only .mp4 survival (need someone to fix that soon!)
[DEV] I upload these 2 patch which is used to port rmvb/mkv HW Decoding to froyo. It should help with porting HW to CM7/MIUI.
[MultiUpload] http://www.multiupload.com/JYNSW5VILR
[MegaUpload] http://www.megaupload.com/?d=A9OC25CT
[WithProxy][MegaUpload] http://174.140.154.13/?d=A9OC25CT
[Hotfile] http://hotfile.com/dl/127190044/59fde10/milestone2_RmvbMKV.7z.html
2.ALT-LOCK not working ( double press ALT instead )
3.USB mass storage mode issue ( except MIUI moded by Wajk )
You will find that you can NOT mount your SD card to PC.
Softwate Solution[Recommend]: Install Protocol-X Dual Mount SD Widget, you can download it from Android Market.
Manual Solution: Every time you connect to PC. Make sure connection manager appears in your notification bar, if not, enable/disable USB debug. Once it shows, first choose NONE, and then choose USB mass storage. By all this, you will see your SD card mounted in PC.
4. Charger light still not work
Seems lights.jordan.so under /system/lib/hw is related to it in some way. I replace it with the one from new leaked GB, then the LED became the charger light
Tutorial:
1. reboot to CWM and then restore nandroid backup (if you want to flash defy_cm7/miui.zip, make sure your CWM is 3.0+)
2. enable bootloader mode, flash fixed sbf via RSD ( fixed sbf is in firmware.7z )
3. Its recommend to make double wipes in stock recovery
4. reboot
5. CM7/Miui running.
[DEV]CH 2.2.2 (2.10.0) Download (The one who has downloaded it earlier should redownload it again for the correct SBF )
If anyone need to download any other CH ROMs but cannt find them, you can send me a PM
http://u.115.com/file/clsmsk69 PASSWORD: bbs.dkdiy.net
Defy CM7 Download http://defycm7.tanguy.tk/ //RC1 and nightly build are all OK
[Defy][DEV][ROM] CyanogenMod 7 (Android 2.3.4) By Quarx
[Fixed]CWM3.0 Download http://forum.xda-developers.com/showthread.php?t=1196590
Fixed sbf of CH 2.2.2(2.10.0) please download it from attachment below:

Great!
Everything is working?
Sent from my Milestone 2 with GingerBread

Oh that sound great.
My phone is bootlooping right now I could test anything before flashing a working ROM
Gsm radio not working is expected, need custom fixes for cm7.
Just try to fix the led/lights

Good lord, this week is beeing the best for the milestone 2 community! Thanks for your efforts guys!

If rom is booting, we can easily get logcats to fix all the problems

inheme said:
Good lord, this week is beeing the best for the milestone 2 community! Thanks for your efforts guys!
Click to expand...
Click to collapse
I concur. Thanks guys for all your efforts!
Sent from Motorola Milestone 2

will5 said:
If rom in booting, we can easily get logcats to fix all the problems
Click to expand...
Click to collapse
It did boot! Now I am runing CM7.

inheme said:
Good lord, this week is beeing the best for the milestone 2 community! Thanks for your efforts guys!
Click to expand...
Click to collapse
+1 / Like
Sent from Motorola Milestone 2 @ GB

Exciting! Cant wait for a decent workable version.

Endless7 said:
It did boot! Now I am runing CM7.
Click to expand...
Click to collapse
Have you tried all the baseband fixes we have? chinese fix, defy baseband changer, milestone 2 baseband app...
Anyway, if none of them work, maybe baseband needs to be adapted to cm7.

yea like this one http://forum.xda-developers.com/showthread.php?t=1182050

will5 said:
Have you tried all the baseband fixes we have? chinese fix, defy baseband changer, milestone 2 baseband app...
Anyway, if none of them work, maybe baseband needs to be adapted to cm7.
Click to expand...
Click to collapse
The biggest porblem: I cannot connect my SD card to PC !

Maybe you can push the files via ADB to your SDCard/Internal memory?

U should get a microSD usb reader. I have one, maybe I could test stuff out for u.

Or you can use a sd card reader
Lets wait for experienced people, I think sd is not working just because it behaves differently than defy storage, it wont be hard to fix it.

I have no minisdcard reader and now time here is 0:30 am, so it`s impossible to buy one.

jambo89liam said:
U should get a microSD usb reader. I have one, maybe I could test stuff out for u.
Click to expand...
Click to collapse
USB debug is now dead
I have upload the files needed. You all could have a try !

You can try USB storage from CWM.

will5 said:
You can try USB storage from CWM.
Click to expand...
Click to collapse
OK , will have a try

Which cm did u download, ive downloaded the latest nightly build. "cm7-110518-0722-NIGHTLY-Jordan"
Im on Gingerbread at the moment, do i need to go back to froyo before flashing?

[HOW TO] Root Nextbook8 Premium (and install market app) [UPDATED 1-17-12]

PLEASE BE ADVISED: THE AUTHOR OF THIS POST NO LONGER PROVIDES SUPPORT FOR THIS THREAD. HOWEVER YOU ARE MORE THAN WELCOMED TO CONTINUE USING THE FILES AND METHODS AT YOUR OWN DISCRETION. GOOD LUCK!!
INTRO: For all those searching the internet trying to find answers as to how to gain root on your Nextbook8 Premium and also gain access to the wonderful android market from which we were greatly deprived (as is the case with many low-priced tablets these days), the wait is over thanks to a certain someone who goes by the name of DEVMONKEY. Of course I take absolutely NO CREDIT for this and only took the liberty to re-write it thus adding a little more detail to the process. Enjoy!!!
DISCLAIMER​***I HAVE NOT TESTED THIS PARTICULAR ROM WITH MY N8 WHEN I HAD IT BUT AS THE PROCEDURE TO FLASH IS STILL THE SAME ALL SHOULD GO WELL. HOWEVER, I AM NOT RESPONSIBLE FOR WHAT MAY OR MAY NOT HAPPEN IF YOU USE THIS AND DAMAGE YOUR DEVICE. PLEASE FOLLOW ALL STEPS CAREFULLY***​
[HOW TO] Root and install Market on your Nextbook8 Premium​
UPDATE: This is post has been updated with a new rom to replace old one. Method of flashing is still the same so no worries. All those who want to upgrade to this rom from the one I previously posted in this guide when I first wrote it can just repeat the steps over again with the new rom package.​
This rom is based on Samhain's release: SamDroid v1.13
Modifications (mostly GUI / cosmetic tweaks):
1.) cifs.ko / slow-work.ko / nls_utf8.ko are in /system/lib/modules and can be loaded using Mount Manager app from the market. This will let you mount CIFS/SMB shares to the device.
2.) Honeycomb-like launcher and updated GUI icons. (you can change it to any Launcher you want)
A couple of things to note once you have installed the rom:
- It starts up in Italian, so open Android settings "Impostazioni" and go to the "Lingua e tastiera" setting, and change the "Seleziona lingua" to your preffered language.
- I've put a few wallpapers in /system/media that you can set full screen by going into Live Wallpapers and using the "Multipicture Live Wallpaper" set them to the screen.
- There are a few things (widgets) on the homescreen that don't work after initial boot, just remove them and add back whatever you want to the homescreen.
- Sleep of death issues seem to be fixed, and the camera works (Camera app works, but Skype and Fring don't work yet...).
- You can also grab Adobe Flash 11 from the market and it'll work correctly.
- This release boots MUCH faster, and is even more responsive than before.
- There is a cell standby issue that drains the battery more in theory so if you feel like that is happening with you just delete the Phone.apk and TelephonyProvider.apk from /system/app. You can use ADB or you can use Root Explorer to do so. You will likely have to force a reboot because you'll start getting repetitive force closes once you do so, but it won't hurt anything. Once you reboot, all is well.
VERY IMPORTANT: After installing custom roms that also flash a custom recovery your N8 may reboot into the custom recovery. If this happens hit reboot system and only reboot system.
​Download new rom from HERE and extract (using winRAR preferably) to your desktop or anywhere you choose. Location doesn't really matter for this guide to work.
NOTE: If you have anything you care about (like apps, notes etc.) on your N8 make sure you back it up now.
Step 1: Turn your N8 off.
Step 2: Press both Volume buttons down and plug the USB cord into the N8.
NOTE: On your screen you should see a bubble pop up in the lower-right corner saying "Installing drivers". Most likely it will say it can't find the drivers. This is normal. Continue following the steps to install the missing drivers.
Step 3: Open the Device manager by typing mmc devmgmt.msc into your "Run" box on XP or search box in start menu on Windows 7 and hitting enter (you can also find Device Manager in your Control Panel options in Windows 7).
Step 4: With your N8 still in an off state and plugged in via USB you should see a yellow exclamation symbol somewhere next to "Unknown Device" in the list of devices in the Device Manager. Right click on it and select "Update driver software".
Step 5: Now it will prompt you to choose how you want to search for it. Select "Browse my computer for driver software" and it will bring up a window for you to navigate manually to the driver location which is in the "drivers" sub-folder in the NEXTBOOK8ROOT folder. Select which ever system you have (32bit or 64bit) and then hit "OK". You might go thru one or two prompts before it actually installs. Just "OK" everything and you should be fine.
Step 6: Once the drivers are installed you are ready to flash. Go into the root of the NEXTBOOK8ROOT folder and select RK29update.exe (right-click for Win7 users and Run as Admin).
Step 7: Now you should be at the interface of the program and at the bottom in bold words it should say "FOUND RKAndroid rock usb" (if it doesn't then it mean the drivers probably weren't installed correctly). This part is VERY IMPORTANT!! Make sure all of the boxes on the left are checked (should look like the pic below). The one at top is the one usually missing a check and would need to be checked by you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 8: Once all boxes on the left are checked you are going to click on "EraseIDB" at the bottom and let it complete. Once that finishes click on "Run" and you will see a series of commands running in the right window pane (see pics below). Give it some time as it will probably take a few minutes. When it's done it should look like the second pic below.
Once the process is finished your NEXTBOOK should reboot into the recovery and reflash the OS. Congratulations!!! You now have an affordable rooted tablet with access to the Android Market!!
OTHER ROMS YOU CAN FLASH INSTEAD OF THE ONE IN THE ABOVE GUIDE:
Pisteone - [SDK 2.1] EXT4 Bluetooth 3G Root [Basic FW 1.0.21] ICS Style - LINK
Fintadroid - [FULL ROOT & EXT4] [BT & 3G] [FW.1.0.21 PRESTIGE] - LINK
ALL ROMS FOR NEXTBOOK8 - LINK (Be very careful and read before you flash)

Thanks! worked great.

I signed up, so i can say thank you. this worked perfectly.. i was skeptical and scared i'd ruin this tablet, as i got it as a gift, and was obviously disappointed to see no market on it, but this worked. thank you.

How about Nextbook Premium 7?

Thank you!
This worked great, I was able to get the android market installed and working.

Android version?
What version of Android does this install?
Cheers, Greg.

It's work, your are wonderful,thank you Sunnyboy167

Great job! Good to have root and Market working. But anyone else get FC when opening Camera app?

Perfect! I have rooted many Android devices and this is one of the easiest ones. Just read the directions carefully and you'll do fine.
Hopefully someone will release an ICS update for this device soon..after using my Galaxy Nexus, Gingerbread seems so...obsolete.

I'm glad you enjoyed this info just as much as i did
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!

THANK YOU!!!!
I was about to throw this tablet out the window!!! Followed the instructions and it works perfectly!!!! Thanks SO SO much!!!

Thanks to you I had a very Merry Christmas haha thank button has been pushed repeatedly!

Hi Sunnyboy,
Just want to say a big thank you for the detail post. I was about to give up on on this tablet when I came across your post.
Chris

help help!!!
hi sunny boy,
i just got my nextbook8 yesterday... come across this website and trying to root my nextbook last night at home...
I encounter this problem...when i plug in my nextbook into the PC USB ..it turn on from the off mode. and the pc started to scan the driver and it actually install successfully. I am running on win7. after that i cant install the driver required.. can anyone help me out here cos i try to run exe. file. it cant root my nextbook... i am helpless now...

I am also having problem with the camera. I'll have this error:
The application Camera (process com.android.camera) has stopped unexpectedly. Please try again.

HELP HELP HELP...not able to on the device after updated the driver....PC shows device found after plug in USB, which shows the device is working but just cannot on it.. a total IT dummy and not sure what's going on..someone said the ROM is damaged which cause this.....any way to recover the tablet..i just bought it for less than a week. HELP HELP HELP!!!!!! (tried reset but still no response)

Sunnyboy167 said:
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!
Click to expand...
Click to collapse
I have already been to this website and successfully added the market to my Next7. I do want to root it and flash a custom ROM, but I have not found anything useful. Thanks though.

Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??

eybarra2 said:
Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??
Click to expand...
Click to collapse
u can reboot the device by using a paperclip and press in the reset button.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Thanks for the detailed guide Sunnyboy167~ Anyway devmonkey just release a newer mod which works better than the previous. Do check it out

hi all,
I rooted my new nextbook8 ...and it works just nice...
just need some help on whether possible to use my iphone as a modem for my nextbook? as i realized it cant detect my wifi network from my iphone. While my colleague 's motorola zoom works fine with my iphone...any solution on this?
Caduser from singapore...

[HOWTO][ROOT] POV Protab 3XXL: upgrading, rooting & saving battery guide

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I recently bought a Protab 3XXL from vendor Point of View, and I noticed there wasn't much information to find on the internet for this tablet. So I had to figure out by myself how to get things done, and as an android beginner, that wasn't very easy. That's why I wanna create this guide for all you people who bought the same tablet and want to do the following things with it:
1. Upgrade to new firmware release
2. Root the tablet so you can uninstall bloatware and install some advanced apps
3. Save battery, make the tablet go faster and smoother.
This guide will probably work on other RK3066 devices as well. I'm in no way responsible if you brick your device by not following every exact step!
1. Upgrade the tablet to new firmware release
When I initially bought the tablet, the firmware that was installed was buggy as hell, so the first thing I did was install the new updated firmware from the Point of View download site. This made my tablet go a bit faster and save a bit more battery life. The manual on the site though doesn't give a great explanation on how to install new firmware. Here's how to do it easily:
Beware: upgrading your tablet will result in loosing all your data! Make sure you took backups before continuing! Also, make sure you got over 50% of battery life so the tablet doesn't die in the middle of the upgrading process.
Go to http://ow.ly/lSuza and download the latest firmware release (get the one with the latest date in the filename, do not install v1.1 as wifi doesn't work on that one, don't know why) and extract it.
For upgrading your tablet to a new release, you need your tablet to boot into flash mode. This is done by switching off your tablet, wait a few seconds, press the VOLUME UP button and (while still pressing that button) connecting your tablet to your pc. Windows will tell you it failed to install the drivers as none were found, that's because you have to manually point windows where to find the drivers. To install the drivers, follow the steps written in the manual (page 2-6) found on the same site as the firmware update.
Open up rkbatchtool.exe which is in the extracted folder from step 1. If all went well, you should see a green rectangle which means your tablet is correctly connected in flash mode. If this rectangle is pink or no color at all, connect your tablet again holding the volume up button.
Once you got the green light on rkbatchtool.exe, you're good to go and you can follow the steps written in the manual!
I tested this procedure on Windows 7, but I guess it should be about the same on any other Windows version. Just use the appropriate drivers as described in the manual That should be about it, if you have any further questions, feel free to ask!
2. Rooting the tablet
Rooting the tablet is even easier than upgrading it! Here's how to do it:
Go to www.moborobo.com. Download and install moborobo as this app will automatically search for the right drivers (other ones than the ones used to upgrade the device) when you connnect your tablet to your pc.
Make sure you got USB debugging enabled on your tablet (settings -> developers options -> usb debugging)
Open up Moborobo, connect your tablet the normal way (so without pushing the volume button) and let moborobo do the rest. If Moborobo doesn't do anything when connecting the device, click on 'refresh devices'. Installing the drivers may take a long time so be patiently (it took about 15 minutes on my laptop).
When the correct drivers are installed, download the tool to root your device from here: http://ow.ly/lSZtT
Don't worry, it's malware free and safe
Extract the zip and fire up SuperOneClick.exe.
Click on 'root'. Everytime a dialog comes up, press 'yes' or 'ok' a few times untill it says your device is rooted.
Disconnect your tablet and check if superuser is installed, that's it
3. Some battery advice
All Android tablets last about a day and have to be plugged in by the evening, and the Protab is no exception for that! These are some tips to make your battery last longer (most tips are for rooted devices, so make sure you root your tablet first!)
Greenify is a great app to save some battery. Watch what it does and how to use it over here: http://www.youtube.com/watch?v=fW81YJME69U. This saved my battery a lot!Download it in the playstore!
Android tablets still have some leftovers from their sibling phones, and that's causing TONS of battery drain. To get rid of the phone functions and a better explanation head over to this guide (very easy to follow): http://ow.ly/lT0ZV
There are a bunch of better home screen launchers out there which are less battery-consuming than the stock android launcher (which the Protab has). My advice is Smart Launcher (or the pro version). This launcher is really smooth, fast and has a clean minimalistic look! Get it at the Playstore: http://ow.ly/lT1yX
Rom Toolbox by jrummy is a great app to execute some root tasks like uninstalling bloatware (software installed by Point of View like their useless keyboard). Head over to the Playstore to download it! Beware of what you're uninstalling, if you uninstall core android apps, it could mess up your system! If this happened, flash your device again as explained in the beginning of this thread.
I use my tablet a lot for reading pdf-files for school. As most pdf-readers have a white background, this drains a lot of battery (the lighter the colors on your screen, the more battery it drains). Moon Reader has an option to read pdf's in night mode (turns the background dark and the words white). This saves a lot of battery and is way easier to read! Head over to the playstore to download it.
As I already said in my previous tip: white colors drain a lot of battery. Therefore, use a dark wallpaper on your home screen!
Always use the lightest apps possible for a task. For example: Chrome browser for Android is a very heavy app which can be perfectly substituted by Boat Browser Mini (a lightweight browser that works blazingly fast). Try and google 'lightweight ........... for android' to see what the best alternatives for a heavy app are!
If someone has other tips for conserving some battery life, be sure to write it in the comments, I'll include it in this list!
If anyone has a better way of solving things or has anything to add to this guide, feel free to let me know

some custom rom fot this tablet POV Protab 3XXL?

costyprj said:
some custom rom fot this tablet POV Protab 3XXL?
Click to expand...
Click to collapse
Searched everywhere, but couldn't find any specifically for this tablet. I found a site which stocks many custom roms for the same chip this tablet has (Rockchip RK3066), didn't test any though so I really don't know if they would work:
Code:
http://www.rockchipfirmware.com/firmware-downloads
If there would be enough demand, I could try and make one myself

Hello,
my mother owns a ProTab 3 XXL. Since yesterday the tablet is not starting any more. I tried the reset button and several combinations with the front buttons.
i also checked the voltages:
- charger: 5,2V
- battery when charger disconnected: 4,3V
- battery when charger connected: 4,3V
is there something wrong? How can i fix the tablet?
thank you very much,
machinE

Hi,
I need backup/dump for protab 3 xxl, v1.1 (I think any v1.x will do). It has cwm installed already, but user did not backup official rom before changing roms, so now its bootlooping, and no way to flash anything on it. I think last resort is restoring official rom dump. Or maybe some other ROMs if someone can provide dump of it. If size is problem, PM me, I can provide way to upload big files. Thanks in advance!!

johhnycash said:
Hi,
I need backup/dump for protab 3 xxl, v1.1 (I think any v1.x will do). It has cwm installed already, but user did not backup official rom before changing roms, so now its bootlooping, and no way to flash anything on it. I think last resort is restoring official rom dump. Or maybe some other ROMs if someone can provide dump of it. If size is problem, PM me, I can provide way to upload big files. Thanks in advance!!
Click to expand...
Click to collapse
Just after install CWM, I'll make backup and post it here.

Korny(CzE) said:
Just after install CWM, I'll make backup and post it here.
Click to expand...
Click to collapse
Thanks a million, you are life saver!!! :good:

I have v1.0 did you try this?

Korny(CzE) said:
I have v1.0 did you try this?
Click to expand...
Click to collapse
I have, it does not work since flash tool needs working tablet. This one cant even boot. Only cwm works...

johhnycash said:
I have, it does not work since flash tool needs working tablet. This one cant even boot. Only cwm works...
Click to expand...
Click to collapse
It's not quite as easy as I expected. So far I failed to flash CWM. Update are fail. What steps are you / user you used?

Korny(CzE) said:
It's not quite as easy as I expected. So far I failed to flash CWM. Update are fail. What steps are you / user you used?
Click to expand...
Click to collapse
Friend doesnt remember, but I believe he used rkflashtool. Here are listed all possible ways to do it : http://androtab.info/clockworkmod/rockchip/install/
Good luck :good:

Ok, finally I was flashed it via root shell. Its backing up right now. After finish, i will upload it somehwere and post link here.

There is.

Korny(CzE) said:
There is.
Click to expand...
Click to collapse
Thank you very much. Downloaded already but have trouble entering cwm. What is correct procedure to enter cwm? Releasing power button and pressing and holding volume up and down when point of view logo appears? I tried almost every combination of keys and no way to enter it. Could be cwm got deleted when I tried to install some rk3066 rom for archos tablet. I dont believe it, but that would be logical explanation as to why I cannot enter it.
Last hope will be trying maskrom mode, by shorting nand chip and hoping it shows up in rkflash tool.

I am not using button combo, coz I have app for reboot to recovery. I will try it.
Odesláno z mého GT-I9505 pomocí Tapatalk

NuVision TM800A510L- General Info (Root, Recovery, Unbrick)

This thread intends to be a general thread for all things about the NuVision Tablet. The aim is to help other users of this tablet to be able to root their device, get a temporary recovery and to unbrick their device. I will add the guides for the following posts below in time. This would not have been possible without help from @andrei_kr.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specifications:
Display: 8-inch IPS HD capacitive touchscreen
Resolution: 1280 x 800
Operating System: Android 4.4 Kit Kat
Processor: Intel® Atom Processor
Memory: 1GB DDR
Storage: 16GB
Micro SD Card Slot: Yes, expandable up to 64GB
Camera - Rear: 2MP
Camera - Front: 2MP
Audio: 3.5mm stereo jack with microphone
Wireless: Wi-Fi 802.11 b/g/n
Bluetooth: Bluetooth 4.0
Battery Type: Rechargeable lithium-ion
Battery Life: 6+ hours; results will vary based on usage and settings
Port: Micro USB
Sensor(s): Accelerometer

Backup/Root/Recovery
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
How to backup of your stock ROM, install CWM and Root your device.
Requirements
ADB/Fastboot Drivers
Intel Android USB Drivers
SDcard (8GB of higher)
Temp recovery script
SuperSU
Steps
Download and unpack IntelAndroid-FBRL-07-24-2015.7z
Power off tab.
Hold Vol+ and press Power on the tab 5-10 seconds
You can see logo about 10 sec and after that DROIDBOOT will load
Connect USB cable to PC
Run launch.bat from IntelAndroid-FBRL-07-24-2015 folder
Type ACCEPT and press Enter
Type 5 and ENTER (cwm.zip)
Type T3 and ENTER (or T4)
CWM will load after 10 sec.
Select backup to external sd card.
After the backup is complete, copy it to the PC to ensure it's safe.
Follow steps 1-10 again and go to install zip from sdcard or external and select the SuperSU zip file and flash it.
NOTE: DO NOT FLASH ANY ROMS WITH THIS RECOVERY IT IS ONLY TEMPORARY. I DID NOT TEST XPOSED SO BE CAREFUL.
Credits
@andrei_kr
@social-design-concepts
@vampirefo
@Chainfire

Unbrick your Tab!
To unbrick your device all you simply have to do is go back to the CWM and restore your backup that you created earlier. If you don't have one, here is a copy of a working backup ---> Google Drive. Credits to @andrei_kr, say thanks!

How to fix touch!
If you unbricked your tablet and your touch isn't working, there is no need to worry. @andrei_kr has provided a guide on how to fix that touchscreen. Credits to him.
NOTE: If your touch is working then do not try this, it will mess up your touch!!
You probably got this touchscreen issue by flashing a different kernel with incorrect drivers.
Now your configuration is likely to differ from the native. You can view the konifig in command prompt or in the terminal :
Code:
cat /proc/gt9xx_config
(only mtk) or using the gtp_tools apk (it is in the attached file below).
It starts with the byte sequence: 0x41 0x1C 0x02 0xC0 0x03
0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution
Touch must somehow work to press the button, if there is support otg, then it's easier, you can connect a mouse.
1. Install the gtp_tools_v2.6_20140126_special.apk
2. Go to the option Firmware update. Click refresh, see IC Version: 913_1020 then touch GT913 firmware and 1020.
3. Go to the option Config Settings, press read, the data were considered. Under Normal Config we have:
65 version
540 horizontal resolution
960 vertical resolution
4. Click browse, select click browse to the native config.
5. Native configuration take from your device, in the same paragraph, press the save (saves the backup config file). Native configuration for Fly IQ446 in the attached file. Press send.
6. If nothing has changed, look at the version you have and native config. Then change the version of the file in the native config in your hex.
Example: 0x41 = 65 home, a stranger 0x49 = 73 => replace the 0x41 to 0x49.

Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk (711.77 KB)
Number of downloads:
11,141,690 in total · 8,610 in the last 24 hours
MD5 checksum:
de4f0dc569f96dbcc5668d40fa76040b
Uploaded on:
Tuesday, May 20, 2014 - 21:59
Changes:
- Fixed a crash with some apps (Disa, Rdio)
- Some minor UI improvements
- A few translation updates
Now either use an android terminal emulator or ADB and run these commands
1. su
2. echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
3. chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
Now you can install the Xposed framework.

max0r4axor said:
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk .
Click to expand...
Click to collapse
Thanks for report.

First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?

Jingbadguy said:
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Click to expand...
Click to collapse
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?

kirito9 said:
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
Click to expand...
Click to collapse
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...

Jingbadguy said:
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Click to expand...
Click to collapse
Oh I thought they were working. Follow the procedure above to fix.

NuVision TM101A510L
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry

Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...

ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)

williamglick said:
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Click to expand...
Click to collapse
I think the models numbers are specific so I can't say for certain that this will work with your tab. Try the fastboot/rooting procedure first and then maybe you can just restore the system partition only not corrupting the boot/kernel.

Unidave199 said:
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
Click to expand...
Click to collapse
You're welcome. I waited months also before finding a working backup.

Jingbadguy said:
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
Click to expand...
Click to collapse
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?

kirito9 said:
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
Click to expand...
Click to collapse
ill let you know just as soon as i can get back to working on those devices... im prety sure if memory serves correctly, that I was getting some errors regarding unable to mound sd or ext sd. I could be wrong but thats what comes to mind.
Im up to my neck in jobs on other devices. (rooting galaxy S5, changing imei on another S5, IMEI change on a LG Stylo 2 plus, Galaxy Tab 2 system issues need to diagnose, and several screen and lcd replacments)

STUCK
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?

after ive flashed super su, when i go to restor the working backup i see a list of backups... including yours but when i select it i always get :
checking md5 sums...
md5 mismatch!
what now?
(i tried just flashing the boot but even that comes back with same error)
I know on other devices the recovery is an img file any the one you provide is a rar... i extracted to my desktop and was gonna try flashing with abd/fastboot but since its not an img file, im thinking it wont work...
any thoughts?
Im still unsure how to flash the recovery that u supply in the section for fixing bootloop....

Jingbadguy said:
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
Click to expand...
Click to collapse
The too many links error is common for this device. Touch doesn't work with TWRP on this device so CWM is out only go. You can root and using cwm like any other root method.