my sk4g wont boot or enter recovery mode help!!! - T-Mobile Sidekick 4G

ok so i rooted my phone using the superoneclick method and and installed CWM with rom manager and everything was fine but then when i tried flashing gingerclone v2 by ayoteddy the phone just got stock on the part that says t - mobile sidekick 4g ect. and i cant even enter recovery mode manually! what can i do? help please did i bricked my phone =/??

More than likely you've softbricked your phone. Follow the steps here to ODIN your phone back to stock. Once you get your phone up again, root again.
The CWM from Rom Manager doesn't seem to work on the SK. You're gonna need to do some manual file moving to make it work. Follow the steps here: http://forum.xda-developers.com/showthread.php?t=1124453
Once you've moved these files, you need to manually get into recovery mode (Power+volume). Click reinstall packages and you should be in CWM. From here, just follow the flashing instructions and you should be golden. Make sure you check your mounts...

If Odin doesn't work Try using Heimdall which is a lot simpler no extra files to download just make sure you have java installed an heimdall will ask you about installing drivers, tried this out on my phone for the hell of it an it worked fine. http://forum.xda-developers.com/showthread.php?t=1350060

Related

[Q] Infuse Bricked even after GTG method!

Hey guys so what happened was that I was trying to root my phone through Gingerbread and Odin (as my infuse is Rogers). But I forgot to put in a SD card so now my phone is stuck in reboot loop! I have tried everything you guys have mentioned online! I cleared the user data but no avail. I inserted a SD card, even put on the SGHI997 rom, inserted the folders voodoo and disable-lagfix and still didnt work. I tried unbricking it via GTG but instead my rogers is gone and now I have AT&T and still in a loop! HELP!
Did you look at this post to see if it helps.
http://forum.xda-developers.com/showthread.php?t=1205381
yup i did. It was the GTG process i mentioned that i tired before. the bootlooping has stopped but know is stuck on the samsung screen :S i left at the screen for 30 mins now still nothing. i cant even enter recovery mode anymore
u can not get into download mode??
yeah i still can
Were you able Odin back to stock?
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
sharkray said:
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
Click to expand...
Click to collapse
What Rom were using?
Try checking repartion when you use Odin.
Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
I am in the same situation and have the same problem too, i"ve looked lots of post and tried different method,,
even GTG's method it still in boot loop!!!!T^T
can anyone help
Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
Hey when you say rom is assume you mean pda kernal files that come with odin and such? Then those would be PDA_ROGERS_UXKG3.tar.md5, PDA_Infuse_Gingerbread.tar.md5, the files the come in GTG unbrick.
I have also did repartion, but it did nothing.
I you mean rom by the SGHI997 rom i tried that too
Edit: Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away
SNadler said:
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
Click to expand...
Click to collapse
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
sharkray said:
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
Click to expand...
Click to collapse
In CWM (red) under "mounts and Storage, select "Mount USB". Of course you are connect to your computer when you do this and in windows an external drive should become available. Place the zip file on the root of that drive.
Once copied, disconnect from windows first then unmout in CWM. from here you can go directly to and install from zip.
Hope that makes sense.
6
hey i tired what you said. i did a few times nothing came. then on my 4th try the driver showed up on my computer but it said 'please insert drive.' i reset and tried again the drive didnt show up
Remove the sim card and try again. Also,you can always copy a rom to an sdcard and install that in your Infuse.
Cranky...
hey i tried what you said but same result. i cant put on rom on because they mass storage does not show on my pc :S after the odd time of resetting and entering recovery mode, it connects but it says 'insert drive'
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
AdamOutler said:
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
Click to expand...
Click to collapse
yes try a pit flash with repartition selected, it might fix it. theses types of bricks have been rare on the infuse and many people dont have experience with them. the available pit is packaged with the att ultimate unbrick but you should probably use it with the rogers odin firmware.
001100 said:
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
Click to expand...
Click to collapse
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
sharkray said:
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
Click to expand...
Click to collapse
Sorry it took so long. I'll try to get in touch with GTG to make sure that his unbrick threads are more clear as to which device they are appropriate for.
UCKD5/E3 unbricks will only work on AT&T Infuses
UXKG3 will only work on Rogers Infuses
Custom Gingerbread ROMs will work on both, but there are no Odin-flashable packages for these.

Help Please!!! Phone keeps restarting

I'm new to this phone stuff and I tried downloading Valhalla v1.3 from http://forum.xda-developers.com/show....php?t=1203591 from recovery mode and my phone rebooted, and now it keeps restarting over and over. I have access to download and recovery mode only. I don't know any ROM or flash business so please help.
I just realized that i tried to download a galaxy 4g theme on my tmobile galaxy s2
aerozero94 said:
I'm new to this phone stuff and I tried downloading Valhalla v1.3 from http://forum.xda-developers.com/show....php?t=1203591 from recovery mode and my phone rebooted, and now it keeps restarting over and over. I have access to download and recovery mode only. I don't know any ROM or flash business so please help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1358498
oneclick to sms kj6, don't forget to follow the directions to the T. Flash twice to make sure you get the bootloaders installed.

Trouble Rooting UCLB3 Gingerbread 2.3.6

- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
JoeyofBladez said:
- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
Click to expand...
Click to collapse
download mode:
http://forum.xda-developers.com/showpost.php?p=25526654&postcount=3
profit
Thanks for quick reply and it worked!
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
JoeyofBladez said:
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
Click to expand...
Click to collapse
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
qkster said:
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
Click to expand...
Click to collapse
I read the instructions and i didn't see it say to wipe in between flashes, just to reboot recovery. I do follow directions you know but can't follow directions that aren't written in the spot I'm reading them and assuming them to be right. But thank you for telling me what I should havedone. So once I have jt kernel, I just flash, wipe, reboot recovery,and flash again?
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
JoeyofBladez said:
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
Click to expand...
Click to collapse
Glad it worked for you.
While in cwm recovery, re-boot into recovery means powering off and then turn back on with 3 finger salute.
Selecting "Reboot Recovery" may not work and may send a user into a loop recovery image.
I've found from experience that flashing a different kernel with different cwm version may erase that loop and let you start over.
As you have discovered what I've been saying along and if you read the ops on the heimdall thread, you will understand that rooting the official firmware is pointless if you are planning on flashing a custom firmware.
Root it only to run it with root permissions.
Flashing in download mode does not require root. Just flash the kernel with cwm recovery.
have fun

[Q]

First off I am sorry for posting this, however I DID use the search tool. I recently got a USA spec Wifi only Xoom. It came with 4.1.1 preinstalled. I have sucessfully unlocked the bootloader.
My problem is this. I cannot gain root or even get CWM installed. I have tried oneclick, i have tried cmd prompt. I have followed every guide I can find to a "T". Is there something missing, is it an issue with Jellybean being preinstalled?
Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.
airesch said:
Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.
Click to expand...
Click to collapse
Thanks for the reply, however this is one of the utilities I have tried,..
Here is a bit more info.
I am running windows 7 64bit if it makes a difference. Whenever I get the device into fastboot and try to flash anything, it just hangs at the original fastboot screen. I have let it sit there from 3 hours and eventually I have to reboot it. The Lord AIO Tool you linked just gives me and error message that the device is not a 2.2/2.3 device. If I were at home I would take a screenshot.
Could my bootloader be corrupt? The device still boots up and runs jellybean fine, but I am not loving the stock experience thus far...
Thanks again for the links!
Actually sounds like your drivers aren't right. I will look them up and link them when I get home
Try installing the driver from http://developer.motorola.com/tools/usb_drivers/, rebooting your pc, and try fastboot again. If that still doesn't work, then there may be something wrong with your pc setup OR your Xoom, not sure at that point.
Sent from my SPH-D710 using xda premium
Thanks a million, I am going to try it fresh on my pc at work. Thanks!
That did the trick THANKS A BUNCH!!!!!

Non-booting Tablet

Okay. I work for a school district and we have deployed tablets to our students for use. I have one -5113 that boots only to the Samsung Galaxy Tab 2 10.1 logo and then goes blank. No animated swirl Samsung logo. Trying to boot into recovery doesn't do anything but go to a black screen. The only thing that I can boot into is download mode. First I tried to flash a stock version of the ROM to the device, but it still operates the same. Then I tried to flash custom recoveries to no avail. The flashable version of Clockworkmod I found boots to the hat and gear logo screen, but then freezes there and eventually the tablet restarts. TWRP will install and I can boot into it, but can't do anything because it wants a passcode that has never been set. I have also tried CF-auto root to install a new ROM, but that was unsuccessful too. I was hoping someone could see the error of my ways so I can get this up and running. Thanks in advance.
According to this thread: http://forum.xda-developers.com/showthread.php?t=2090104
you can try this:
Ok, I was able to fix this. Here is how in case this happens to someone else.
1. Uninstalled Kies
2. Reboot PC
3. Plug in tab and wait for drivers to load
4. Start Odin (I found the DL link in the dev area)
5. download the firmware that you want to load - I had JB
6. extract the md5 file
follow Odin instructions to flash a file, this worked without being in Download Mode.
0ground0 said:
According to this thread: http://forum.xda-developers.com/showthread.php?t=2090104
you can try this:
Ok, I was able to fix this. Here is how in case this happens to someone else.
1. Uninstalled Kies
2. Reboot PC
3. Plug in tab and wait for drivers to load
4. Start Odin (I found the DL link in the dev area)
5. download the firmware that you want to load - I had JB
6. extract the md5 file
follow Odin instructions to flash a file, this worked without being in Download Mode.
Click to expand...
Click to collapse
I have been able to flash through Odin. That works great, but it doesn't change how the device is working.
Suuuuuuuuuper bummed, I was running with not 1 issue, custom rom/kernel/recovery was working perfect.. well for some reason, tab crashed, wouldn't boot back up, went into recovery, tried to clear dalvik cache and tab rebooted, tried again , same thing, well, I went to just restore nandroid and didn't work. I rebooted into download mode tried to Odin stock back, Odin hung. So I opened up kies and I went to reboot download mode for a "fresh start" and when I booted back up, brick.. no recovery, no download mode.. I'm irritated ... :/ down to only old EpicTouch and my S4.. was cool for a bit to have a tab to play with too.. oh well.. I get tab3 later.. :/
sj
Sent from my sickass SPH-L710 on CarbonJB 4.3 - 10/14 Nightly with KT Kernel 10/8 using XDA Premium

Categories

Resources