I just wonder if it's possible to pass 1080p to HDMI. I don't mean a HDMI mode, I wonder how to throw image at this resolution (ex. a picture). Normally image displayed on a TV is just resized phone screen.
Related
Hello
I use the HDMI output on the xoom for playing snes games om the tv. When i connect the Xoom to my 40" sony full hd tv, the desktop gets chopped off on all sides. Why is this?
I can understand that it chopps away the bottom status bar, but i loose some of the sides as well. Is there anyway to adjust the output?
I haven't found a way to reduce the overscan. I've adjusted it a tad on my TV, but nothing had fully removed the overscan. I think it intentionally runs that way.
Same here.
It´s very annoying.
If you have overscan problems, it's your TV, not the Xoom. See if you have a "just scan" option on your TV set, my Samsung does and it produces a 1:1 picture.
I'm using Samsung's microUSB to HDMI adapter with my Sensation and it works fine but seems like there's no any configuration of hdmi output nowhere. Is there any app to do this or some config files?
There's just one small problem. I have black frame appx. 2cm on 42" TV. It seems like it's made for overscan because when i enable oversan in my tv the image fits perfectly but, obviously, i get cropped resolution then. But, i've noticed one interesting thing: the stock apps like camera output really fullscreen image on the TV without any frame and without any UI elements on TV screen so all the controls go to phone's display and not on the TV. So if there's no way to configure HDMI in sensation yet i have another question: Is there any video player which plays all formats(like MoboPlayer, etc.) which can also handle TV output like stock apps making it really fullscreen without any frame and not just cloning the phone's display to tv?
Thanks.
Im using a micro HDMI to HDMI adapter and a normal HDMI cable tested and used in other devices, but whit my XOOM[4.1.2] The screen don't fill show all my table screen (im not referring to the 80 px that the status bar has, i know that dosen't show) it just appears cropped.
Im testing whit a Philips 32'' 32PFL4505D, the tv dosen't have an option that can help me
I think I saw this over the weekend. For some reason I had to go into the TV settings and have it "auto-detect" again. Then the TV properly scaled the picture to fit on the screen.
ByteWrencher
Mine is, I have a 1080p 120hz led tv, To do the test i download youtube video planet earth amazing nature scenery in 1080p, When playback using Vplayer sw/mode it show 720p..
Hi, and thanks in advance for reading and trying to help. I don't know if my problem is with updating the software, or just settings, or incompatibility.
I've got the following SETUP: I recently bought This CX-919-Quad-Core-Android-4-4-Mini-PC-WiFi-Google-TV-Box-1G-8G-Bluetooth-S19K Android stick and i hooked it up on my SONY BDV-E380 Home Cinema Blu-Ray Player. And from the Sony player, i'm using an HDMI cable to a BENQ W1070 projector.
My problem is the following: I've got no problem sending any type of stream normal sized from the sony player to my projector, but since i hooked up the CX 919 android box, i've got the 1280x720x60 resolution set which makes my projector show the image on apx the middle half of the screen. When i try to set it to 1080p (setting which is set already in the sony player and the current version of the android stick supports) it goes black and reverts back to 720 after the seconds count down.
I attached 2 pictures with the resolution choosing from the stick, from which when i get 1080p screen goes black, and one with the size.
What can i do ? Is it me, or them ?
Hi guys,
I have a MX III Tv Box, and a really old Toshiba Tv. The Tv only have a VGA input (no HDMI), therefore I'm using a converter from HDMI to VGA.
But I have a problem, when I set the MX III to output in 720p, the TV seems like getting a good resolution (with the edges cut off) but the entire screen is half greenish. When I set the MX III to output in 480p, suddenly there are no issues with colors, but of course the resolution is only 480p.
The only output options I have in MX III are 480p (Good colors, but low resolution), 720p (Greenish, good resolution with edges cut off) and 1080p (Showing nothing, black flickering screen).
When I try to connect my laptop using the HDMI to VGA converter, the Tv works perfectly fine on 720p (I think, it looks HD).
One last important thing to say is that when I connect my laptop, the TV shows "Input XGA", but there is no such setting where I can modify the TV to always stay on XGA setting. When I connect the MX III, when on 480p it says "VGA PC".
Does anyone know if:
1. Upgrading the firmware of the device may help, if so, to which firmware?
2. There is a way to control the output resolutions and settings of the device, other than what there is with the stock version?
3. Any other idea?
I will really appreciate it, I'm desperate
Thanks.