Related
i have a samsung epic 4g. iused super1click but it is saying that busybox was not installed properly and now rooted apps are saying i do not have root access but root checker says i have root access please help
download "busybox installer" from the android market. you can install the latest busybox from it
i installed busybox installer but it is sayin it is already installed but not installed correctly
go into /system/xbin and /system/bin and look for the file "busybox." delete it and try installing it again with busybox installer
i have tried that in both system/bin and system/xbin but it will not delete. do i need a specific file management app
nalanotae said:
i have tried that in both system/bin and system/xbin but it will not delete. do i need a specific file management app
Click to expand...
Click to collapse
i forgot to mention that you will need to mount your system as read/write. to do this, a file management app would be very helpful. root explorer in particular (a paid app, but as you may already know there are always ways to get apps for free; that is all i will say about warez as it is prohibited on xda). in root explorer, you can mount your phone between r/w (read/write) and r/o (read only). once you mount it as r/w, i believe you can now delete those files
one other thing i forgot to mention, i keep getting a notification that my su binary is outdated when i click to update it says fail.
ok so i was able to delete the busybox files out of the 2 folders but when i went to install it with the busybox app it says "it looks like busybox is installed but it does not appear to be the version that you selected to have installed, you may want to try the intalation again but this using a different istalation location." i try a different location and check my root checker and it keeps telling me that busybox is installed incorrectly
as i have not used superoneclick before, i have no knowledge about the su binary being updated. i used z4root to root my phone.
your best bet is to do one of the following:
a) if you can unroot your phone, then do so (i believe superoneclick allows you to unroot your phone). then try rooting it again using z4root. download z4root from here and tell me what options it gives you when you open the app (it should say either temporary root and permanent root; select permanent root). z4root should work on your phone as it has the same requirements as superoneclick (which is having android version 2.2/2.2.1)
b) if step a didnt work, post in the superoneclick thread for help. but step a should work
Nexus 5
Rooted
Stock image
Used nexus root toolkit
Busy box crashes when attempting to install from within busybox
Says not installed
Used root explorer to check system/bin
And
System/xbin
No filename that says busybox
Not sure what to do.
---------- Post added at 10:47 AM ---------- Previous post was at 10:35 AM ----------
Resolved
Set system to r/w at boot as root.
Launched bb
Says installed
mjs1231 said:
Nexus 5
Rooted
Stock image
Used nexus root toolkit
Busy box crashes when attempting to install from within busybox
Says not installed
Used root explorer to check system/bin
And
System/xbin
No filename that says busybox
Not sure what to do.
---------- Post added at 10:47 AM ---------- Previous post was at 10:35 AM ----------
Resolved
Set system to r/w at boot as root.
Launched bb
Says installed
Click to expand...
Click to collapse
I have this same issue on my Nexus 6, i also used Nexus Root Toolkit, how did you set your system to r/w at boot as root?
I am not able to install buzybox due to "try to installing to a different location that may resolve isuue..please help me
I know this is old!
Hello readers,
I am aware that my resolution might not help everyone but it will definitely help some. This might only help if you are rooted and using the SuperSu app..
I know this is a really old thread. But there might still be people out there that have this problem and are having a hard time finding the the answer for it. I was just 5 mins prior searching on google for an answer but could not find one.
And so how did I fix it you may ask? (I hope)
Well long story short I turned the following option of in the SuperSu application: "Mount namespace separation"
I thought of this because I had seen a pop-up message when using Titanium Backup that if I experience problems, I should disable that option. And it was probably referring to the Titanium Backup app alone and not any other. But I gave it a shot and it worked.
In detail for those who need it:
It does not matter if you have the Busybox (by Stephen (Stericson)) application installed during this or not. (I had it uninstalled during)
Open the SuperSu app, swipe left on the screen twice so you get to the Settings page (or just click the Settings tab)
Scroll down until you see the option "Mount namespace separation".
If it is activated, disable it.
Reboot
Go ahead and install Busybox if you haven't.
Open Busybox and wait for it to load completely
Click install
Hurray!
Hello, i have bought busybox pro but i can't manage to install it through the app, in /system/xbin, i only have one file named "dexlist" and in /system/bin i have many files but none named busybox, when i try to install busybox on /su/bin, i get a message: "it looks like the installation of busybox was not successful / try installing it to a different location that may resolve the issue", but i tried differ'ent locations and it didn't work
---------- Post added at 09:03 PM ---------- Previous post was at 08:53 PM ----------
don't forget to reboot after unchecking "mount namespace separation" !! if not it won't work. my phone was quite long to reboot though...
it still doesn't work for me... on huawei p8 lite 2017 (PRA-LX1)
I'm still using the old version not BusyBox V+ .. anyone tried the latest version? it seems quite confusing and I couldn't execute scripts
Busybox
Example if use custom rom viper10 you can set system r/w in tweak > misc
lovemajj said:
Hello readers,
I am aware that my resolution might not help everyone but it will definitely help some. This might only help if you are rooted and using the SuperSu app..
I know this is a really old thread. But there might still be people out there that have this problem and are having a hard time finding the the answer for it. I was just 5 mins prior searching on google for an answer but could not find one.
And so how did I fix it you may ask? (I hope)
Well long story short I turned the following option of in the SuperSu application: "Mount namespace separation"
I thought of this because I had seen a pop-up message when using Titanium Backup that if I experience problems, I should disable that option. And it was probably referring to the Titanium Backup app alone and not any other. But I gave it a shot and it worked.
In detail for those who need it:
It does not matter if you have the Busybox (by Stephen (Stericson)) application installed during this or not. (I had it uninstalled during)
Open the SuperSu app, swipe left on the screen twice so you get to the Settings page (or just click the Settings tab)
Scroll down until you see the option "Mount namespace separation".
If it is activated, disable it.
Reboot
Go ahead and install Busybox if you haven't.
Open Busybox and wait for it to load completely
Click install
Hurray!
Click to expand...
Click to collapse
Hey, really glad you posted this even though you said it was old, and I'm still on it :laugh: but the combo of your solution, and mounting my /system as "r/w" through Root Explorer worked on my 6P on Oreo!! (OPR6)
Thanks again!! :good:
Williquah said:
Hey, really glad you posted this even though you said it was old, and I'm still on it :laugh: but the combo of your solution, and mounting my /system as "r/w" through Root Explorer worked on my 6P on Oreo!! (OPR6)
Thanks again!! :good:
Click to expand...
Click to collapse
What exactly do you mean by "and mounting my /system as "r/w" through Root Explorer" can you explain further? I can't get Busybox to install after OPR6 update
idbl_fanatic said:
What exactly do you mean by "and mounting my /system as "r/w" through Root Explorer" can you explain further? I can't get Busybox to install after OPR6 update
Click to expand...
Click to collapse
I'd be happy to help. It's been a little while and I haven't repeated the process yet so forgive me if I'm not super clear, even though I think I should be.
So what I meant was get the app Root Explorer ($3.99 on the app store) I don't know how 'piracy' is really looked at on XDA, though I can't imagine well, but you can download the Root Explorer 'pro' apk, and then - as long as it helps - purchase the app from GPlay to make sure to support the devs, which is what I did.
So to get to the actual process - should be quite easy as I did this on OPR6 myself - open Root Explorer, navigate to the "root" tab at the top. Then you should see "Mounted as r/o" and right next to it, a button that says "Mount R/W". Toggle that button, and the text on the left should state "Mounted as r/w", then try to install busybox (however you prefer - I used BusyBox Free by Stephen (Stericson) like I always do).
Hope you are successful with that method, please keep me updated with your outcome so I can help as best as I can.
Williquah said:
I'd be happy to help. It's been a little while and I haven't repeated the process yet so forgive me if I'm not super clear, even though I think I should be.
So what I meant was get the app Root Explorer ($3.99 on the app store) I don't know how 'piracy' is really looked at on XDA, though I can't imagine well, but you can download the Root Explorer 'pro' apk, and then - as long as it helps - purchase the app from GPlay to make sure to support the devs, which is what I did.
So to get to the actual process - should be quite easy as I did this on OPR6 myself - open Root Explorer, navigate to the "root" tab at the top. Then you should see "Mounted as r/o" and right next to it, a button that says "Mount R/W". Toggle that button, and the text on the left should state "Mounted as r/w", then try to install busybox (however you prefer - I used BusyBox Free by Stephen (Stericson) like I always do).
Hope you are successful with that method, please keep me updated with your outcome so I can help as best as I can.
Click to expand...
Click to collapse
Well that didn't work
Update, I had to change the path to /system/bin instead of /system/xbin
I'll try to keep this as short and simple as possible:
I am a total newb to the touchscreen, smart-phone, I just got a USCC Samsung Mesmerize SCH-i500, came installed w/ 2.3.4 Gingerbread & I just had to reflash it w/ USCC EH09 root using Odin 3 v1.85, now, everything I have "hacked" in the past (PSP (both fat & slim), iPod Touch, etc) I've always had to use step-by-step instructions (I am not a dev & know absolutely nothing about programming) & the same applies here.
So, it has root access & BusyBox (I don't even know what that is) installed, so my question is what was the point?
What exactly can/should I do from here? Any suggestions?
well, with a rooted android device you can
*remove bloatware (you're wasting your root if you don't do this)
*system-wide adblock (my personal fav)
*change boot animations
*flash custom ROM
*free wifi tethering
*overclock the CPU
and more!
Thank you for the answer, I'll look into these things but on a side note: my su app keeps saying that theres an update available for my su binary & every time I tap update it goes through the process & less than half-way through it pops up a message saying: "This updater cannot update the su binary on phones that have some kind of write protection on the system partition like S-ON. You can continue to use Superuser with your outdated binary, or update su with ROM Manager."
I have tried to use ROM Manager, I even bought the Premium version, either way it gives me the same message, even after doing the Fix Permissions option, is there a way to manually allow su access to the files it needs to overwrite/update?
Oh, and, yes, I have allowed it when su asked, so now I'm at a loss....
Xeno Templar said:
Thank you for the answer, I'll look into these things but on a side note: my su app keeps saying that theres an update available for my su binary & every time I tap update it goes through the process & less than half-way through it pops up a message saying: "This updater cannot update the su binary on phones that have some kind of write protection on the system partition like S-ON. You can continue to use Superuser with your outdated binary, or update su with ROM Manager."
I have tried to use ROM Manager, I even bought the Premium version, either way it gives me the same message, even after doing the Fix Permissions option, is there a way to manually allow su access to the files it needs to overwrite/update?
Oh, and, yes, I have allowed it when su asked, so now I'm at a loss....
Click to expand...
Click to collapse
I had the same issue today, couldn't update SU.
but after I had updated the terminal emulator, I was able to update SU.
Fixed the Problem with updating SU Binary
Recently updated my device with a new rom and was unpleasantly surprised to not be able to update my SU binary with either the application itself or CWM. I am not sure that this is the best way to handle the problem, but I found a solution that worked for me.
1. Open "System/XBin" in RootExplorer (or a similar app)
2. Mount the drive as R/W using the button up at the top left
3. Open the superuser app and update the binary from within the app
4. There may be an error in the log about the device not being able to remount the drive properly, but the update WILL occur.
5. Use RootExplorer to open the directory again and mount as R/O.
I hope this helps!
There have been a couple similar posts, but none seem to provide any help, so I apologize for creating a new one if the answer is already out there.
With that said, I recently purchased a new LG Nitro HD and promptly used SuperOneClick to root it. Everything seemed to work fine (on the first try); I rebooted the phone, SU was there, all seemed well. The first thing I tried to use the root access for was to change the LCD Density, and that didn't work - so I tried to update the BusyBox on my phone, using "BusyBox Installer". After I did that, my root access seemed to "break", by which I mean superuser is still installed, and SuperOneClick reports my phone as rooted, but SuperUser cannot authorize apps (or doesn't even try) and attempting to run an app that requires root access simply fails, suggesting that my phone is not rooted. Typically, I would ODIN the SOB and be done with it, but I cannot find any PIT files for the Nitro HD (and I am assuming that would be necessary for me to do anything with ODIN). I've also tried using SuperOneClick to unroot and reroot the device, but now it hangs on step 7 every single time.
Does anyone out there have any suggestions at all?
I believe I fixed this issue. "Super Manager" appears to use its own busybox, which is enough to open the system directory in r/w mode and delete the busybox directory from system/xbin. This seems to have restored root access, though a lot of apps are still not working for me. Still, apps are prompting for su access and are showing up in su's list of approved apps - which is more than I could get before.
Please advise - I am seeing this as well
SolusCado said:
I believe I fixed this issue. "Super Manager" appears to use its own busybox, which is enough to open the system directory in r/w mode and delete the busybox directory from system/xbin. This seems to have restored root access, though a lot of apps are still not working for me. Still, apps are prompting for su access and are showing up in su's list of approved apps - which is more than I could get before.
Click to expand...
Click to collapse
The new MeanROM ICS uses the new SuperUser - however, it breaks root access as you mention. Please advise the corrective action. Send PM if ncessary
Hey guys and gals,
I've got a 7.7 on stock ROM rooted using the original root method the day I purchased the tablet. I've been using my tablet happily for over a month now.
Unfortunately, late last night I opened up Google Play and started updating all my apps, including Busybox by stericson. There was a new busybox version out (1.20.1) and I decided to install it using "Smart install." I'm not sure if it tried to install to /system/bin or /system/xbin but after the install I saw the app give me an error message explaining that the install was unsuccessful. Anyways, now a lot of my root-requiring apps including Titanium Backup Pro is not functioning at all. It seems that my BusyBox installation is corrupt.
I tried using BusyBox Pro by stericson to uninstall but the corrupt busybox seems to have prevented a proper uninstall, so it still lingers. I downloaded JadeEyedWolf's root.zip from his pinned "Root" post which includes SU & BusyBox thinking that installing the root.zip from CWM Recovery would over-write the corrupt busybox. After flashing I rebooted the tablet and I still got the same corrupt busybox issues.
Anyone have any suggestions?
Thanks!
Edit: The corrupt busybox causes the Wifi to show Error when I try to turn on the radio. Not that internet is vital in repairing the tablet, but I've worked around it by tethering Bluetooth internet off of my OG HTC Evo 4G. It's strange though - I can peruse websites and view the items in the Google Play Store but it will never actually download, though the "Downloading --- " bar does display.
I had the same problem, stock rom as well. If you check the reviews for Stericson's Busybox on Google Play, the two top ones a few minutes ago both mentioned the same issue.
Trying to root again and reinstalling Superuser didn't help, neither did a factory reset (manually salvaging settings and data was a pain too).
Re-flashing the original rom fixed it, following the guide at http://forum.xda-developers.com/showthread.php?t=1469635
I switched to JRummy16 Busybox installer and it seems to work.
Surprising that no one else here mentioned the problem ...
Try this fix.
To be more specific: BusyBox installer 8.0 replaces /system/bin/sh and /system/bin/ash binaries. I don't have any idea why would it do that (considering that I specified /system/xbin as an install folder), but this quick fix restores original ash binary (and sh as a symlink to it).
Installer 8.1 and above has this bug fixed.
Had the same problem with busybox and had to re-install the rom. What does this fix do?
Sent from my GT-P6800 using xda premium
Already answered, see post above.
Deleted
Sent from my GT-P6800 using xda premium
Too late for me to try it, but thanks the same
ginkage said:
To be more specific: BusyBox installer 1.20.1 replaces /system/bin/sh and /system/bin/ash binaries. I don't have any idea why would it do that (considering that I specified /system/xbin as an install folder), but this quick fix restores original ash binary (and sh as a symlink to it).
Click to expand...
Click to collapse
Thank you so much it works well now! You're a life-saver ginkage. Should I keep the stericson busybox 1.20.1 original install or should I use the busybox installer to install a fresh copy of 1.20.1 in /system/xbin?
Thanks again!
Thank you so much it works well now!
Click to expand...
Click to collapse
That's why we are here.
Should I keep the stericson busybox 1.20.1 original install or should I use the busybox installer to install a fresh copy of 1.20.1 in /system/xbin?
Click to expand...
Click to collapse
Personally I always use /system/xbin, so that some custom kernel (like CWM) could use /system/bin if it wanted to.
BTW, the BusyBox installer bug was fixed in version 8.1, and current version is 8.2, so you should update it anyway. I was wrong to mention "1.20.1" version. Post edited.
Hi guys,
First of all, I want to apologize sincerely for the bug that my application introduced in 8.0. I didn't catch the bug because my device wasn't affected by the bug.. (I always test my app myself before releasing..yet I still miss things due to devices file structure being so different.)
At any rate, the bug was that the application symlinked all applets to Busybox. Normally, this is done if you use smart install and change the settings manually. By default smart install will not overwrite applets that are not already symlinked to Busybox.
This was not a problem with Busybox 1.20.1 but was a problem with my application and how it performed the install.
Again, I am very very sorry that this has occured, as a result I am scouring the web trying to find people with the issue and help them resolve it.
If you have this problem, it can easily be fixed by reflashing your current rom. you do not have to wipe or clear any data. Once this is done, you can download my installer, version 8.1 or greater and upgrade busybox as normal.
Please let me know if you guys have any questions.
Best Regards,
Stephen - Stericson
ginkage said:
Try this fix.
Click to expand...
Click to collapse
Deleted
I too had the same situation, updated busybox then noticed something was awry when hidebar wouldn't work. My issues go way beyond broken root and WIFI, I've also been getting constant reboots. I was just about to re-install the stock rom until I read about the possible udate.zip fix. I'm very interested in how to apply the zip (I don't have CWM) being that i do extensive customization (with no backup, I know, I know) and I'd hate to re customize everything again. If I can get things right the first thing I'll do is install CWM and perform a nandroid backup.
ninpo said:
I too had the same situation, updated busybox then noticed something was awry when hidebar wouldn't work. My issues go way beyond broken root and WIFI, I've also been getting constant reboots. I was just about to re-install the stock rom until I read about the possible udate.zip fix. I'm very interested in how to apply the zip (I don't have CWM) being that i do extensive customization (with no backup, I know, I know) and I'd hate to re customize everything again. If I can get things right the first thing I'll do is install CWM and perform a nandroid backup.
Click to expand...
Click to collapse
you don't need CWM, just copy the fix onto external storage card,enter recovery (PWR + Vol. up Buttons) and apply the update from there. just fixed my tablet this way
regius said:
you don't need CWM, just copy the fix onto external storage card,enter recovery (PWR + Vol. up Buttons) and apply the update from there. just fixed my tablet this way
Click to expand...
Click to collapse
A thousand thanks kind sir, I'm back in business, that was pain free
---------- Post added at 07:29 PM ---------- Previous post was at 07:27 PM ----------
ginkage said:
Try this fix.
Click to expand...
Click to collapse
Thanks for posting this, I'm in love with my 7.7 once again.
Appreciate the response stericson. I had purchased your Pro version but even after I fixed the uninstall failed and it also did not detect superuser permissions even though SU gave a notification that Busybox Pro was granted superuser. All other root-requiring apps work. Had to refund the Pro purchase though
No problem. there seems to be an issue with the application detecting root sometimes, that's why you can still try the install.
I'm looking into this issue, it just started showing up so I am not sure what is going on.
ginkage said:
Try this fix.
Click to expand...
Click to collapse
Really appreciate this fix. On the verge of wiping out everything....
But decide to see if its busy box since its the last thing i install before all this happens....
Just to note that uninstall busybox also doesnt solve the issue...
so need to fix.
I had a lot of problems with root permissions not being granted by Superuser app. Recently I have tried SuperSu from the market and uninstalled original Superuser app (important to follow the instructions for the App! ).
My main problem was that ntfssd was not granted root permissions at startup, so I had to start it again manually. With SuperSu it is no problem. Also I use Busybox and successfully updated to the latest binary recently.
ginkage said:
Try this fix.
Click to expand...
Click to collapse
Thank you so much for that, I had been driven crazy and had also gone through a factory reset to try and get my device back working, to no avail. Can I ask where you got the ash you're including here? It worked for my Samsung Galaxy Tab 7 Plus, on 3.2, but is it a generic enough file that it can be dropped on nearly all Android devices without any issues arising?
I only ask out of curiosity and understanding the system more.
Latest end-user Omnirom 4.4.2 for the LG P500 can be found here:
http://jenkins.androidarmv6.org/job.../archive/omni-4.4.2-20140214-p500-NIGHTLY.zip
I am starting this to stimulate interest in the Omnirom, get/give advice and help on how to get it working on our device. My hope is that one of the devs would take this over and move from a discussion to a dev thread if need be. I can really offer no help at this point as I have not yet gotten this installed and running.
Another reason to start this is to keep from less than courtiously cluttering other threads with this stuff.
Finally, cm-11 for our device is quite problematic so I seek another Kitkat chocolate treat
==================================
Omni has two big problems holding up a working install on our device:
1. Omni is not rooted by default. I tried flashing a superuser.zip, still had no root. I have copied a full cm-11 su (binary) to the zip, tried that but installation was aborted for other reasons so could not yet test this approach. Please, devs, give us normal root in this ROM. Not so useful without it.
2. No adb until boot completed and I approve it. Great idea for security, but this thing is still experimental. So I cannot ride herd on the installation as I am accustomed nor run a certain script that I need from later cm10.* and cm11. As it turns out, Omni will run the script, cm11 would not. However, once I have attempted an Omni boot, I cannot get adb back outside of that successful boot until I restore another ROM! Means no adb reboot, adb reboot recovery, nada. Makes things very very problematic.
Omni will run my /data/local/userinit.d/ scripts which recent cm10.* and cm11 refuse. I always ran ICS this way, and I could presumably get a complete startup sans boot this way. To try this next--caution: Kitkat Link2sd mount script is not identical to previous ones so this must be placed to try this. Using the older version (maybe newer one as well!), everything simply FCs out, get nowhere. Link2sd needs root the create the script normally, Xposed needs root to get going, and Titanium and other tools are more useful with root as well. Lack of root is the main problem right now. Please ...
==========================
The usual disclaimer: If you have rooted your device, the warantee is void. Of course, for this oldie but goodie, that is just a distant memory. However, these phones are still being sold so if you got a new one, be warned.
I can not be responsible for brickage and breakage. Especially without that always active adb umbillical, it is much easier to soft-brick the device and it can get hairy-scarey getting back to recovery. Again, be warned.
The recent JB and KitKat ROMs are too large for our devices and must be trimmed before installation. My philosophy is that anything not needed to get Android up and running does not belong on system. Practically, anything installable from Play or side-loadable as user apps should be removed from system/app. Examples are Calendar (install Play version), calculator, camera/gallery, browsers, emailers and such. There are superior choices on Play or side-load those included with the ROM. If using Google Search, also remove the quicksearchbox. system/usr/srec, system speech recognition config, can be pushed to sdext and symlinked from there, freeing a good few meg. You do not need a lot but do need a few meg free on system.
Link2sd or equivalant is needed to keep data space available. Things get flakey when data space gets too low. Gluttonous apps like the newer Swype and Tapatalk (just a few examples--great apps, do not get me wrong) will very quickly run you out of data space and gobble up too much RAM as well, slowing the works. Choose wisely
So here is my next trial:
BACKUP!
Make sure no old 11link2sd script is on /data/local/userinit.d/
Wiped dalvik-cache, restored the sdext from the backup since the CWM seems to wipe this as well.
Wiped cache partition (actually, no longer used for very much!).
Installed the omni nightly which formats /system and proceeds.
Installed the minimal GAPPSlight.zip.
Reboot.
Came up just fine. First asks to enable adb for this computer, said "yes," "always for this computer."
Adb now active and adb, in any event, adb does have root!
Went to link2sd. Cannot get root. Went through all the setup options (including root for apps and abd!). Still not root.
So copied a new 11link2sd to /data/local/userinit.d/
Power menu advanced reboot active in setting and it actually works, avoiding above-mentioned fears
Rebooted.
Bootup runs all my scripts so now have all the link2sd-linked apps.
I could call this a BUG: It neither re-asks the adb question nor places it online. So ... no more abd
Still no root -- tried to activate exposed which without root will not do anything.
Rebooted anyway.
Came up just fine, as before. No root, no Xposed, Still no abd.
Comments:
Otherwise, works just fine, seems responsive. If I were willing to live without root, I could go on with it as a daily driver. Next trial, I will not check "always for this computer." Maybe then it will re-ask me and so re-enable abd.
Shares with cm-11 the flash of a disabled homescreen before the lockscreen. Harmless (as long as it is very brief).
Shares with cm-11 the "upgrading ... restarting apps ..." message on each reboot. Harmless, as long as linked apps, dexes are not being unlinked. Did not check, but cm-11 was no longer do that with the newest link2sd version.
The screen begins to turn off much more quickly. In cm-11, this took a good few minutes, eating the battery as it went.
Background processes came up more quickly (subjective) than cm-11, even though some lacked root to function correctly.
Did not really check if it shares the dissappearing data space problem which for many is a showstopper in cm-11. Initial space seemed appropriate, not half of expected amount. Without adb, can be checked using the SLW storage widget. I should really have done this.
Root remains the main problem with this. Neither flashing a superuser nor placing a full cm-11 su on the ROM enable root. Someone know how?
Attempts at getting root:
The recommended way is to flash SuperSU's zip (available from their XDA thread, surprisingly, not from Play). Since flashing this has twice bricked me up, I am loath to try that once more.
First attempt was the create an init.d type script to start the su daemon. I had placed a Cm-11 su on the ROM's zip before flashing. Voile, manually running that script from adb got me root. The command on adb shell hung up but it had run. Link2sd made its mount script (of which I have my own copy so whatever ...), even accepting the previous approval!
So I placed it on /data/local/userinit.d/ with all my others. On reboot, daemon was indeed running. Tried to activate Xposed. Attempts hung up, then failed. Running superuser (installed from Play as user app, symlinked) would FC. Noticed that I had multiple incidences of the su running which might be indicative of something!
So went back to recovery, removed my script, and flashed the CMW superuser.zip. On reboot, daemon was running. However, any attempt to use superuser FC'd. Removed the apk from system/app, rebooted to regain use of my installed version. Same result.
This issue of root needs be properly resolved to use this ROM.
So back to recovery and cm-10.2 which meanwhile may well be the optimal ROM for this device!
BTW: If the always for this computer was not checked on giving adb permission, after reboot and after a while, the question will be re-asked and one can get adb once again which is good new, though a bit less convenient.
This omni ROM from my humble opinion is quite bizarre and funny. What's really the intention to release ROM that need rooted device to install it (need recovery so first device must be rooted), but then rooted apps didn't work since no SU installed .
Sorry omni devs and anyone. No offence. Just express my opinion.
I tried Superuser.apk and SU from xda but failed.
Sent from my Optimus One using xda app-developers app
Some things I'd like to ask/share
1. My play store isn't working. I've trimmed the ROM n installed gapps too n installed play services too. Bt when i open play store, it works fine. But i can only see spinner loading under 'My Apps' n when I install any app, it gives fc. Then i have to clear data to open it again. What to do? Is it something to do with dpi? Because I've changed the dpi.
2. How to change tiles? I can't get its settings.
3. Any other int2ext script working?
4. Screen record has a very low fps and after recording, the phone becomes unusable. Have to restart
5. I found this ROM more snappy than any other CM11. Thanks to performance controls. Its awesome!
6. Only if root worked, this would be the BEST KitKat ROM for our phone.
(I'm trying to fix it too)
This ROM can be used aa a daily driver if u don't use much apps and root isn't a big issue. Great work
:thumbup:
EDIT:
Link for root in Omni ROM:
http://forum.xda-developers.com/showpost.php?p=50863602
Sent from my LG-P500 using XDA Premium 4 mobile app
Tried again to get root:
I can, in adb shell, su --daemon.
This gets me root for this session. Link2sd will create its mount script!
Rebooted. Thought that the root could be magically persistent as someone posted on some thread somewhere (did a lot of searching! and there were two instances the last time when I used a init.d script to do this). It was not so did su --daemon. Tried to use Xposed. Chugged a while, permission denied. CWM superuser's UI does not work on cm-11, not on this either. But it did not FC!
So I adb pushed SuperSU to system (I have enough room!). It wanted to install its binary. So I rebooted into recovery and flashed that.
On reboot, the su daemon was indeed running It has an 'R' instead of an 'S' on the column before its name. SuperSU also had a process running so thought hey, OK (and it did not brick the phone this time!). Tried to run Xposed. Simply sat there. Tried to run SuperSU, said it needed its binary and could not install it. Yuk! Never did like this app. On cm-10.2, even if CWM superuser wants a new binary, its UI will work anyway. Tried to run that. FC this time.
I never did check free data space.This after several successful reboots with no alarms about it. Overlayed the SLW widget onto link2sd and ran it. Only had 20meg. Fact is I had never ran link2sd to clean up dalvik and such so tried it now. Relink all apps simply chugged along. This can take time, even if it reports nothing to do! Finally lost patience with it but could not kill link2sd with back key (My fault? Options do not take effect until setting run, even if they were checked, it seems). Have to consider the possibility that the "disappearing data space" bug may be in this ROM as well as cm-11 (which, if so, would place it in the AOSP code!). No real way to check it without working root so everything plays.
Rebooted recovery, back to cm-10.2. BTW: the su daemon here has the 'S'.
rhar**** said:
Some things I'd like to ask/share
1. My play store isn't working. I've trimmed the ROM n installed gapps too n installed play services too. Bt when i open play store, it works fine. But i can only see spinner loading under 'My Apps' n when I install any app, it gives fc. Then i have to clear data to open it again. What to do? Is it something to do with dpi? Because I've changed the dpi.
Click to expand...
Click to collapse
Don't know. I only change DPI using Xposed which has not been enabled yet
2. How to change tiles? I can't get its settings.
Click to expand...
Click to collapse
I assume you mean those on the right-side pulldown. Have not found the interface either. Toggle to get that and enough of them are there.
3. Any other int2ext script working?
Click to expand...
Click to collapse
Need root. I did get link2sd to create it mount script after su --daemon.
4. Screen record has a very low fps and after recording, the phone becomes unusable. Have to restart
Click to expand...
Click to collapse
Never tried it. May also be DPI related?
5. I found this ROM more snappy than any other CM11. Thanks to performance controls. Its awesome!
6. Only if root worked, this would be the BEST KitKat ROM for our phone.
(I'm trying to fix it too)
This ROM can be used aa a daily driver if u don't use much apps and root isn't a big issue. Great work
:thumbup:
Click to expand...
Click to collapse
Yeah. Since I can get link2sd mounts either by running the daemon once or placing my copy, I have all my apps available (root ones will not be very happy). I used Xposed and need one round of root for this but that, as opposed to link2sd, did not work.
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+.
Sent from my LG-P509 using Tapatalk 2
ibub said:
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Is that su in /system/xbin is binary command to get root access on system file? You must run this command in terminal. However, Terminal.apk only can be launched if SU.apk or Superuser.apk present in /system/app.
So, in my opinion SU or Superuser is needed to run rooted apps (such as TB, Link2SD). Maybe Busybox is required too?
Sent from my Optimus One using xda app-developers app
ibub said:
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+. :confused
Click to expand...
Click to collapse
System/xbin/su is the binary. One included on the ROM is tiny, barebones (no root). I replaced it with one from cm-11. When it is working right, I believe this gives you the dialog: Allow-Deny, Now-10min-always and such. It also has a daemon mode which services root access. I have not gotten the dialog on the Omni after manually starting the daemon.
That daemon needs be started early-on. Even an init.d script may not be good enough (Omni has real init.d capability as opposed to cm-11!). There is a "persistant-root" item in cm-11's build.prop. Maybe this will work here too the with cm-11 binary?
The apk is a user installable app (or gets placed on system by flashing zip). This gives access to the application-by-application permissions granted or denied in the above dialog, enabling changing them. SuperSU offers the most alternatives but is the most ticklish. CWM superuser is simpler, less finicky but seems not to work on 4.4.*. This is part of the problem. On cm-11, I have root, have the above dialog, superuser does not FC but no UI. On the Omni, since root was achieve manually after-the-boot, more problematic.
There are other apks around, superuser-elite, paid versions, etc. They are not exclusive--I had three of them around until I removed them and kept CWM. Any one of them good on cm-11? Should!!! work here too, he-he. The apk is not necessary to service root (i.e. mine is link2sd-symlinked and before link2sd gets its root, no mount script so no app seen).
xu3sno said:
Is that su in /system/xbin is binary command to get root access on system file? You must run this command in terminal. However, Terminal.apk only can be launched if SU.apk or Superuser.apk present in /system/app.
So, in my opinion SU or Superuser is needed to run rooted apps (such as TB, Link2SD). Maybe Busybox is required too?
Click to expand...
Click to collapse
Busybox is there, we do not have gnutls like normal distros--most everything goes through included busybox.
Terminal will work without the apk on /system/app. Cannot judge from the Omni because of no or incorrect root
I just learned a new set of tricks.
[email protected]:/ $ su -h
Usage: su [options] [--] [-] [LOGIN] [--] [args...]
Options:
-c, --command COMMAND pass COMMAND to the invoked shell
-h, --help display this help message and exit
-, -l, --login pretend the shell to be a login shell
-m, -p,
--preserve-environment do not change environment variables
-s, --shell SHELL use SHELL instead of the default /system/bin/sh
-v, --version display version number and exit
-V display version code and exit,
this is used almost exclusively by Superuser.apk
[email protected]:/ $
Sent from my LG-P509 using Tapatalk 2
ibub said:
I just learned a new set of tricks.
[email protected]:/ $ su -h
Usage: su [options] [--] [-] [LOGIN] [--] [args...]
Options:
-c, --command COMMAND pass COMMAND to the invoked shell
-h, --help display this help message and exit
-, -l, --login pretend the shell to be a login shell
-m, -p,
--preserve-environment do not change environment variables
-s, --shell SHELL use SHELL instead of the default /system/bin/sh
-v, --version display version number and exit
-V display version code and exit,
this is used almost exclusively by Superuser.apk
Click to expand...
Click to collapse
Yes, this simply a root version of sh. The one on this ROM probably will not allow anything.
The one from cm-11 will check permissions, give the dialog to ask if root working correctly.
Latest build omni-4.4.2-20140227 is up, triggered by androidmeda :good:
http://jenkins.androidarmv6.org/job/omni/4/
Download here:
http://jenkins.androidarmv6.org/job/omni/4/artifact/archive/omni-4.4.2-20140227-p500-NIGHTLY.zip
Will try is that SU or Superuser included
EDIT:
Just flashed it with clean install.
1. System reboot took under 3 minutes :good:
2. su binary exist at /system/xbin but not link to busybox binary which is present also at /system/xbin.
3. Installed Terminal.apk, it works but denied to run su command line
4. Installed Root Explorer.apk, works fine but failed to access root, such to change permission R/W of /system folder.
5. Referring to 3 and 4, apps need root access failed to work.
6. Tried to install SuperSU flashable zip, it replaced su binary from stock and it caused apps which is need root access (in my case gooim manager, root explorer, and Link2SD) not responded and apps're getting hang
7. Installed Superuser, launched it, works but need su binary.
Do we need latest SuperSU or Superuser, hence su binary is compatible with Android 4.4.2 ?. The installed one is for Android 2 and 3.
xu3sno said:
Latest build omni-4.4.2-20140227 is up, triggered by androidmeda :good:
http://jenkins.androidarmv6.org/job/omni/4/
Download here:
http://jenkins.androidarmv6.org/job/omni/4/artifact/archive/omni-4.4.2-20140227-p500-NIGHTLY.zip
Click to expand...
Click to collapse
Do not know what has changed. There have been kernel merges, etc.
***
2. su binary exist at /system/xbin but not link to busybox binary which is present also at /system/xbin.
3. Installed Terminal.apk, it works but denied to run su command line
***
Click to expand...
Click to collapse
The /system/xbin/su included with this ROM is for no-root access allowed. A blocker.
I placed the su from a cm-11 ROM. This can run its daemon and get root access. Works for link2sd but nothing else (i.e. Xposed), apparently. According to some googled posts, that daemon must be started very early on (as I stated before). I had it in an init.d script. Started but had same negative results. May try the persist.sys.root_access=1 flag in build.prop. Maybe the internally buried code in boot.img will start the daemon as requested here (if it was not removed). There is no explicit script in the cm-11 ROMs to start that daemon.
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
rhar**** said:
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
Click to expand...
Click to collapse
Okay. Waiting for edited omni ROM (SuperSU included ?), as you did with cm-10.1.5-KITKAT-Update_3 :good:
Wish you luck
Sent from my SM-T311 using xda app-developers app
rhar**** said:
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
Click to expand...
Click to collapse
Great. SuperSU itself is problematic but will suffer with it if it works. Would prefer generic like other ROMs.
Anyway, as in my OP, I would be looking for a dev to take this thread over as a dev thread (or open one).
Another OMNI build
Another Omni build is released @ Jenkins, triggered by Androidmeda.Can d'load it from : http://jenkins.androidarmv6.org/view/All/job/omni-experimental/12/
sumansur2008 said:
Another Omni build is released @ Jenkins, triggered by Androidmeda.Can d'load it from : http://jenkins.androidarmv6.org/view/All/job/omni-experimental/12/
Click to expand...
Click to collapse
Labeled for commits about boot animation.
Anyway, downloading.