i tried changing my cid to HTC__E11 and it worked but it doesnt show any OTA even after refreshing a lot and waiting a while
now im trying to change it to a diffferent cid but it doesnt change it i think
it says my cid is still HTC__E11
C:\>fastboot oem writecid HTC__001
... INFO pyramid_init_sd, SD card power on
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
INFOStart Verify: 3
INFOerase sector 65504 ~ 65535 (32)
OKAY [ 1.094s]
finished. total time: 1.095s
C:\>fastboot reboot-bootloader
rebooting into bootloader... OKAY [ 3.199s]
finished. total time: 3.199s
C:\>fastboot getvar cid
< waiting for device >
cid: HTC__E11
finished. total time: 0.010s
If you don't get the update after this change, you have done something else to your phone which causes the update to not be able to detect you're eligible for the update. I have changed my CID to HTC__E11 (because I'm Dutch) and I used the stock ROM which can be obtained from here. I also changed the device back to S-ON, but I'm not sure if that is necessary.
I have version 2.14 hboot
I followed the instructions in the: http://forum.xda-developers.com/showpost.php?p=38304611&postcount=1 thread:
However this is my output:
Code:
C:\android>adb reboot bootloader
C:\android>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.088s]
finished. total time: 0.090s
C:\android>fastboot flash zip downgrade_tp.zip
sending 'zip' (44 KB)...
OKAY [ 0.212s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 1.724s
I don't know why it isn't working.
Either not S-off or cid not 11111111?
Sent from my HOX w/CM10.1 4.2.2 s-off
When trying to flash an recovery - i have subject message:
d:\>fastboot.exe flash recovery openrecovery-twrp-2.6.0.0-evita.img
sending 'recovery' (8000 KB)...
OKAY [ 1.110s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.413s
I've tryied sevelar recoveries (cwm, cwm touch, twpr).
Bootloader is unlocked, s-ON, cid 111111
Phone now stuck on a boot loop.
What should i try next?
Delete
d:\>fastboot oem rebootRUU
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) CMD18: cmd failed
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(740): error 2
(bootloader) Start Verify: 3
OKAY [ 0.039s]
finished. total time: 0.039s
Than phone simply reboots.
It seems very bad ? hardware?
Requirements :
ADB Drivers
Fastboot
Moto G Stock Firmware
Downlaods :
ADB & Fastboot Setup - https://drive.google.com/file/d/0BxE4PACUiwQqVkxCOTJBZ29WNnc/view?usp=sharing
Unbrick Zip - https://drive.google.com/file/d/0BxE4PACUiwQqN0xvOGpJMUg5MVU/view?usp=sharing
CWM Touch Recovery - https://drive.google.com/file/d/0BxE4PACUiwQqbXFpU25Eb3lIWkE/view?usp=sharing
PAC-MAN ROM with GApps - http://forum.xda-developers.com/showthread.php?t=2667834
Credits : Firmware Team
CWM
Carlos Spitzer
If your phone doesn't turn on after the battery dies, then keep the power button pressed till you see the battery icon. Always connect to a wall charger if the battery is dead after the phone is hard bricked.
Method :
To Enter Fastboot :
1) When your phone is turned off, press the power key and volume down button for around 5-10 seconds and let it go.
2) Connect your phone to your pc via usb.
3) Install the setup provided in the link and press "y" in the window.
To Flash Firmware :
3) Extract the zip which contains a batch file "unbrick.bat", 5.0.2 Firmware & Fastboot.
4) Run the batch file "unbrick.bat"
If your phone is still stuck in a bootloop, I would recommend you to first flash the CWM Recovery using fastboot.
Then, you can sideload a ROM (I used PAC-MAN) using ADB. Then just flash the ROM in CWM. If you need stock, then follow the above steps after successfully booting into PAC-MAN ROM. I have provided all the links above.
That's it, you are done!
The Only Worked Tutorial
this is the only worked tutorial for me. i have tried many tutorials it seems not workin at all.luvd it:good:
I'm glad it worked
Sent from my XT1033 using XDA Free mobile app
Major problems with my XT1033
Hello, please help. I have tried to follow your instructions to unbrick my Moto G XT1033 but I just get the message in the Command Prompt that fastboot is not recognised.
I think my phone was accidently disconnected from the pc when I was trying to flash back to stock firmware from CM11. Since then the phone will not shut down & only shows 0% battery when connected to the mains. It only charges the battery when connected to the PC. I can get to the fastboot screen (please see attached images) & as can be seen the phone confirms usb is connected but the phone is not recognised by the PC. Please help. I have tried all other methods without any success.
Regards
Brian
You did it for me
:good:
Eventually I managed to get fastboot recognised & followed your instructions even though the first few commands seemed to FAIL I continued and I now have a fully working Moto G XT1033
THANK YOU
THANK YOU
THANK YOU
YOU ARE THE BEST. I SHOULD HAVE TRIED YOUR INSTRUCTIONS FIRST BECAUSE I WAS SO DISAPPOINTED I COULDN'T UNBRICK MY MOTO G I BOUGHT A 2ND GEN MOTO G.
Kind Regards
Brian
I need a help, I am using PA and I can't get gps lock.
could anybody upload/send me NON-HLOS.bin from 4.4.4 stock image?
I lived in third world country so...... it will be a pain in the a** to download the full stock image.
edit: Got it
bfc9999 said:
:good:
Eventually I managed to get fastboot recognised & followed your instructions even though the first few commands seemed to FAIL I continued and I now have a fully working Moto G XT1033
THANK YOU
THANK YOU
THANK YOU
YOU ARE THE BEST. I SHOULD HAVE TRIED YOUR INSTRUCTIONS FIRST BECAUSE I WAS SO DISAPPOINTED I COULDN'T UNBRICK MY MOTO G I BOUGHT A 2ND GEN MOTO G.
Kind Regards
Brian
Click to expand...
Click to collapse
Never lose hope
Great Tutorial. But I had Network issue and that's why i flashed it.
It was not fixed.
But reset works fine.
Clicked Thanks
please help
:crying::crying::crying::crying::crying::crying::crying::crying:
preflash validation failed....please help....ive followed the tutorial correctly but i still end up in a bootloop.........u r my only hope
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.297s
C:\Users\DRAVYA\Desktop\stock>fastboot flash motoboot motoboot.img
target reported max download size of 536870912 bytes
sending 'motoboot' (1940 KB)...
OKAY [ 0.094s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.359s
C:\Users\DRAVYA\Desktop\stock>fastboot flash logo logo.bin
target reported max download size of 536870912 bytes
sending 'logo' (619 KB)...
OKAY [ 0.063s]
writing 'logo'...
OKAY [ 0.031s]
finished. total time: 0.094s
C:\Users\DRAVYA\Desktop\stock>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.379s]
writing 'boot'...
OKAY [ 0.666s]
finished. total time: 1.045s
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.378s]
writing 'recovery'...
OKAY [ 0.618s]
finished. total time: 0.996s
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot flash system system.img_sparsechunk.0
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.031s]
sending 'system' (262142 KB)...
OKAY [ 8.476s]
writing 'system'...
OKAY [ 8.609s]
finished. total time: 17.117s
C:\Users\DRAVYA\Desktop\stock>fastboot flash system system.img_sparsechunk.1
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.047s]
sending 'system' (237949 KB)...
OKAY [ 7.706s]
writing 'system'...
OKAY [ 7.076s]
finished. total time: 14.829s
C:\Users\DRAVYA\Desktop\stock>fastboot flash system system.img_sparsechunk.2
target reported max download size of 536870912 bytes
erasing 'system'...
(bootloader) Erase allowed in unlocked state
OKAY [ 0.047s]
sending 'system' (243326 KB)...
OKAY [ 7.856s]
writing 'system'...
OKAY [ 16.026s]
finished. total time: 23.929s
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (47476 KB)...
OKAY [ 1.584s]
writing 'modem'...
OKAY [ 0.772s]
finished. total time: 2.356s
C:\Users\DRAVYA\Desktop\stock>fastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.047s]
finished. total time: 0.063s
C:\Users\DRAVYA\Desktop\stock>fastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.047s]
finished. total time: 0.063s
C:\Users\DRAVYA\Desktop\stock>fastboot flash fsg fsg.mbn
target reported max download size of 536870912 bytes
sending 'fsg' (102 KB)...
OKAY [ 0.047s]
writing 'fsg'...
OKAY [ 3.179s]
finished. total time: 3.242s
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.047s]
finished. total time: 0.047s
C:\Users\DRAVYA\Desktop\stock>fastboot erase userdata
erasing 'userdata'...
OKAY [ 0.063s]
finished. total time: 0.063s
C:\Users\DRAVYA\Desktop\stock>echo
ECHO is on.
C:\Users\DRAVYA\Desktop\stock>fastboot reboot
rebooting...
finished. total time: -0.000s
C:\Users\DRAVYA\Desktop\stock>
facing a problem ....please help
D:\Moto G\failsafe>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.031s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.328s
I'm updating this thread with Lollipop 5.0.2 firmware and a batch file.
I have made changes to OP to include Lollipop Firmware and to make it easier. Hope it solves your issue.
my phone's dead
no bootloader,
no logo,
nothing
Hi I'm tryin to follow this thread after the other unbrick and restore posts didn't help.
Moto G XT1033 booting to the android logo with a traingle on top of it. Recovery doesn't work and the adb window states waiting for device although I have tried many adb drivers along with moto drivers and mfast and rdlite among other things.
Win 10, Unlocked bootloaded with no recovery and no USB debugging enabled.
Any help would e highly appreciated
C:\Program Files\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: 411A
(bootloader) product: falcon
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x5
(bootloader) emmc: 16GB Toshiba REV=06 PRV=01 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: TA93301I18
(bootloader) cid: 0x0007
(bootloader) channelid: 0x00
(bootloader) uid: EA25A8020F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Apr 1 0:38:33 UTC 1959"
(bootloader) ro.build.fingerprint[0]: motorola/falcon_asia_ds/falcon_umt
(bootloader) ro.build.fingerprint[1]: sds:5.1/LPB23.13-56/55:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.221.21.56.falcon_umt
(bootloader) ro.build.version.full[1]: sds.AsiaRetail.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband: MSM8626BP_1032.3116.98.00R EMEA_DSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g89906d6 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Aug 17 10:37:16 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V41.1A-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V41.1A-0-g199f3c5
(bootloader) rpm.git: git=MBM-NG-V41.1A-0-g8b7736e
(bootloader) tz.git: git=MBM-NG-V41.1A-0-g99c1a7c
(bootloader) aboot.git: git=MBM-NG-V41.1A-0-g80481ae
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.316s
C:\Program Files\Minimal ADB and Fastboot>
---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
my device only stuck motorola bootloader unlock
Hey
Masters! Hello, everyone, I am a user from China, and I have gone over the wall and came to the xda forum.
Due to my limited level of English, I have read XDA's htc forum with the help of Google Translate, and the resources of domestic players are scarce.
After watching the S-on mode to modify the MID and CID tutorial I began to try
https://forum.xda-developers.com/u11/how-to/how-to-change-cid-s-sunshine-t3888170/page4
I modified the three files sdf1 sdf2 sde1 in the /dev/block/ directory according to the above tutorial, and ran adb push sdf1 /dev/block/ in TWRP mode
adb push sdf2 /dev/block/
adb push sde1 /dev/block/
Then restart in the twrp mode and enter the download mode, and the phone cannot be turned on after a black screen
The previous state of my phone was
HTC U11 SPRINT version
s-on
Officially unlocked
Version is sprint2.33.651.10
The mobile phone now has various combinations of keys and all kinds of constant keys are all in the black screen state, I will show the picture
The problem now is to enter separately under cmd
fastboot devices This command can discover devices
fastboot getvar mid pop-up error message
fastboot getvar cid pops up error message
fastboot getvar all
PHP:
C:\Users\Administrator\Desktop\adb-htc>fastboot devices
FA75Y0501577 fastboot
htc_fastboot finished. total time: 0.109s
C:\Users\Administrator\Desktop\adb-htc>fastboot getvar all
(bootloader) boot-mode:FASTBOOT
(bootloader) unlocked:yes
(bootloader) off-mode-charge:0
(bootloader) charger-screen-enabled:0
(bootloader) battery-soc-ok:yes
(bootloader) battery-voltage:4341
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) variant:MSM UFS
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xE000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xD9D800000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xFE800000
(bootloader) secure:yes
(bootloader) serialno:FA75Y0501577
(bootloader) product:HTC_Phone
(bootloader) max-download-size:536870912
(bootloader) kernel:uefi
all:
finished. total time: 0.014s
htc_fastboot finished. total time: 0.152s
C:\Users\Administrator\Desktop\adb-htc>fastboot getvar mid
getvar:mid FAILED (remote: GetVar Variable Not found)
finished. total time: 0.002s
htc_fastboot finished. total time: 0.136s
C:\Users\Administrator\Desktop\adb-htc>fastboot getvar cid
getvar:cid FAILED (remote: GetVar Variable Not found)
finished. total time: 0.002s
So is there any other way to use fastboot
Return the modified file to the original directory
I changed the cid and mid to 5000 for the mainland China version
The phone is now under a black screen
Run fastboot flash radio
fastboot flash boot
fastboot flash boot
They are all fed back such information FAILED (remote: verify HOSD fail)
C:\Users\Administrator\Desktop\adb-htc>fastboot flash radio radio.img
htc_fastboot v3.0.9.3 (2015-06-30)
target reported max download size of 536870912 bytes
sending 'radio' (61052 KB)...
OKAY [ 1.805s]
writing 'radio'...
FAILED (remote: Not allowed on PRODUCTION device)
finished. total time: 1.808s
htc_fastboot finished. total time: 2.124s
C:\Users\Administrator\Desktop\adb-htc>fastboot flash boot C:\Users\Administrato
r\Desktop\mxhtcsjgj\boot.img
htc_fastboot v3.0.9.3 (2015-06-30)
target reported max download size of 536870912 bytes
sending 'boot' (29649 KB)...
OKAY [ 0.893s]
writing 'boot'...
FAILED (remote: Not allowed on PRODUCTION device)
finished. total time: 0.895s
htc_fastboot finished. total time: 1.232s
C:\Users\Administrator\Desktop\adb-htc>fastboot flash hosd C:\Users\Administrato
r\Desktop\adb-htc\hosd_signed.img
htc_fastboot v3.0.9.3 (2015-06-30)
target reported max download size of 536870912 bytes
sending 'hosd' (34169 KB)...
OKAY [ 1.010s]
writing 'hosd'...
FAILED (remote: verify HOSD fail)
finished. total time: 1.253s
htc_fastboot finished. total time: 1.593s