Database Info

[Q] Bricked problems,I need help!!

Hello, I need help with my Samsung Focus, I flashed but has fallen on the initial screen, someone help me solve this problem please ... thank you.

OK dude, you're gonna have to provide a *LOT* more info than that.
Which hardware revision of the Focus (1.3 or 1.4)?
What ROM was it on, including version?
What ROM were you flashing to it (version, etc.)?
What tool did you use?
What happened (the full explanation, not "it didn't work")?
What does the phone do now when you try and boot it (again, not "fallen on initial screen" but exactly which screen, and does it look normal or not)?
Also, the standard solution for a bad flash is to use Zune to restore the phone from a backup. These backups are created automatically when an official update is installed, and contain the full image including the ROM. They can be restored by going to Settings->Phone->Update when the phone is connected to Zune, or by putting the phone in download mode during bootup (if you can't boot normally) and connecting to the PC with Zune running.

GoodDayToDie said:
OK dude, you're gonna have to provide a *LOT* more info than that.
Which hardware revision of the Focus (1.3 or 1.4)?
What ROM was it on, including version?
What ROM were you flashing to it (version, etc.)?
What tool did you use?
What happened (the full explanation, not "it didn't work")?
What does the phone do now when you try and boot it (again, not "fallen on initial screen" but exactly which screen, and does it look normal or not)?
Also, the standard solution for a bad flash is to use Zune to restore the phone from a backup. These backups are created automatically when an official update is installed, and contain the full image including the ROM. They can be restored by going to Settings->Phone->Update when the phone is connected to Zune, or by putting the phone in download mode during bootup (if you can't boot normally) and connecting to the PC with Zune running.
Click to expand...
Click to collapse
Excuse my ignorance friend. I mean, I bought my Samsung Focus wp7 by second hand to a friend.First, I did a hard reset the phone to restart initials configurations and it wordked correctly.I set it some configuratios like my contact list, my language, i checked camera and made some shoots, the device is perfectly.I put it to load and after few minutes the phone restart!!!. I checked de device and I saw it lost all configurations made by me, exmple: languaje configuration(spanish), my contact list and all the pictures, music and video!!...I decided to probe the camera again...error, dont let me save new pictures or videos, just it blocked when a try to doit.Dont reproduce any video or music!!.....When i saw this problems, started to find solutions in diferents foros like 'windosphoneforos.com', this foro is in spanish, Im cuban,..well,someone told me try to do a hard reset again, i did it, resultss :NOTHING.DONT WORK...the same problems, finally I decided to flash my phone with WP7(no mango or others updates):
hardware revision of the Focus : 1.3
ROM was it on, including version: dont nokw, i suposse was the original.(7004)
ROM were I flashing the phone :Samsung-i917-Focus-firmware-UCJK2-ATT-USA (and then I try whit Samsung-i917R-Focus-firmware-UXJL2-ROGERS-CANADA)
tool I used : WP7 Downloader Ver 7.21 for All Device (Publish version) and WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X)
What happened : Well, I execute the flash process following the steeps like proposed this link http://forum.xda-developers.com/showthread.php?t=973420..(in this tuto appear samsung omnia, Ive focus, but is the same way)...finally, the process end correctly,dont show any errors or something, but in the moment that it restarted to ask me the initial settings after the rebuilding process, it just stopped in Samsung screen...and not pass to At&T screen....I flashed my phone 4 times , and always is the same....
...just I dont nowk to do now, i like the style and prestations of the Focus, i used Iphone, but i want to try with WP7, and the Focus is so nice isnt?...please if you could help me, i think if I cant resolve this problem here, ill never cant...
thanks...

Issue since cm11,4.4.4, es manager and usb not recognized

My 959V is rooted, had plenty of roms,ect over the last 3 years decided to do Gremlin remover and update it...,
Couple days ago upgraded to the "909" download of CM11,4.4.4, but every site I get it from gives me 908 (even though they all say 909) (last 3 digits of download version). The 908 will not recognize on my Win 7 laptop, but was fine up to now with previous cm11 same phone..
I have used the same cable for the last year for both my Galaxy and 2 Sidekicks phones, data and charging, now the Galaxy only charges, Windows detects but wont recognize, does on the sk4g's
Also (908) will not allow me to paste into sys/media with a " read only issue", although up to now swapped 15 different bootani without problems. Tried 3 different root file managers,same outcome.
Is the driver for the phone firmware windows looks for(on the phone itself) replaceable from sdcard? Im guessing its a bootloader issue and the 908 is the one not to of put on my phone.
Whats the probability I am getting the 909 but the 908 will not allow it to surpass it. Goes through the whole flash and on reboot I have to reenter emails,playstore apps,ect, but on 908 still in settings.
I can/ have been able to swap 1 rom via twrp and sdcard on 908 ( to slimkat4.4.4 and back to 909, but comes up 908) any other roms error before flash(and slimkat does not recognize on usb either).
is it a Kernel fix, and can it be flashed via sdcard? Bootloader via sdcard? Bad usb port? Does charge, and the drivers/ cable verified.
Thank you for any help, been 3 days now, redone my laptops (2) from scratch, everything ,c++,java,netframework,samsung,zadig 2.0, and more.

DId you do a clean upgrade (did a factory reset) before you installed CM11? If you didn't, go into TWRP and do a full backup (/system, /data) and do a factory reset, then boot up the phone and see if your computer will recognize it.

FBis251 said:
DId you do a clean upgrade (did a factory reset) before you installed CM11? If you didn't, go into TWRP and do a full backup (/system, /data) and do a factory reset, then boot up the phone and see if your computer will recognize it.
Click to expand...
Click to collapse
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.

Floridasun said:
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.
Click to expand...
Click to collapse
I didnt do a backup, if thats an issue , can I backup 2nd motherboard and apply to the first?

Floridasun said:
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.
Click to expand...
Click to collapse
You can flash new kernels via recovery but it sounds like your issues are bigger than that. The fact that the 2nd motherboard is recognized via USB but not the 1st suggests that there's some kind of hardware issue. The drivers on your computer are working fine since the 2nd mobo is recognized, and so is your USB cable.
Why not just keep using your 2nd mobo? Is there something wrong with the 1st?

FBis251 said:
You can flash new kernels via recovery but it sounds like your issues are bigger than that. The fact that the 2nd motherboard is recognized via USB but not the 1st suggests that there's some kind of hardware issue. The drivers on your computer are working fine since the 2nd mobo is recognized, and so is your USB cable.
Why not just keep using your 2nd mobo? Is there something wrong with the 1st?
Click to expand...
Click to collapse
O.K., so Ive been playing with the second mobo just to test different angles.
1) E.S. File manager is the culprit, swapped out for a paid app Ive used with Sidekick 4g, Root Explorer, and boot ani. goes fine, on both mobos.
2) The latest gapps (cm 11 w/ gaps 4.4.x) was giving me a "Google servers cannot be reached" error on both mobos, used the gapps for cm 10.1 (jb 4.3) and all is working, both mobos.
3) Was reading that possibly the adb driver is in the kernel, and thats what windows is looking for? Ive tried but can only sd card flash at this point so, giving up. I can bluetooth,wifi share or email files to myself if need be. Im guessing its a hardware issue beings that the 2nd mobo was reflashed identical to to the first. (with exception of one click 2.3.6,and w/a twist oc/uv on the 2nd),1st one will not downgrade at all below 4.4.4 by sd, I was trying to ics a rom guessing the foundation might overwrite any missing stuff then upgrade back to 4.4.4.
One post mentioned that the mtd/bml cross flash is a no-no, could that mess up usb driver identity on the phones side?
Not a big deal, both phones/ roms are working great and have no issues (except 1 doesnt connect to a computer for file transfer). Thank you for your help.
Little early to ask but are you going to be in this forum long enough for lollipop to be ported? I would send you this phone for devving if you think you can get it to transfer files. Also need to get a lcd/digitizer, i have the rest of the phone.
Also, the phone was working fine up to about a month ago, it was recognized by the computer, only difference I made was trying apps, off playstore, five fingers for ebay,different weather apps for widgets,silver/gold prices apps. Thats when it started not recognizing.

I was getting the same error about the google servers, then I tried a earlier version of gapps. Connects now.

Floridasun said:
Little early to ask but are you going to be in this forum long enough for lollipop to be ported? I would send you this phone for devving if you think you can get it to transfer files. Also need to get a lcd/digitizer, i have the rest of the phone.
Click to expand...
Click to collapse
I have no plans to try a Lollipop port, this phone is almost 4 years old now. You might be better off sending the phone to @bhundven since I recently got two dev phones donated to me.
As far as the phone itself goes, the phone should be recognized even if there is no driver for it installed on your computer. You can use this software to verify that
http://www.nirsoft.net/utils/usb_devices_view.html
I don't believe you can even edit anything on the phone to make the USB device not be recognized when plugged in short of bricking your phone, so if there isn't even a USB connection being made, as I mentioned before, it looks like a hardware issue is causing your problems.
In that case, it'll be hard to flash anything without going through a lot of hassle since all the reliable recovery methods we have need that you are able to use your USB port on the phone.
EDIT
If you do still have TWRP available on the phone, flashing any ROM will reflash a kernel, but be careful because the recovery is tied to the kernel and some ROMs have a non-working recovery, so if you happen to flash some of these you'll be stuck with a nice paperweight . The latest CM11 I have posted does have a working kernel/recovery but I still don't think it'll fix your issue.

FBis251 said:
I have no plans to try a Lollipop port, this phone is almost 4 years old now. You might be better off sending the phone to @bhundven since I recently got two dev phones donated to me.
Click to expand...
Click to collapse
I'm currently looking into it, as well as fixing some issues with cm11. I have an SGS4G, so no need to send a phone.
Not just is it a 4 year old phone, but I am not sure how many people even use this as a daily driver anymore.

bhundven said:
I'm currently looking into it, as well as fixing some issues with cm11. I have an SGS4G, so no need to send a phone.
Not just is it a 4 year old phone, but I am not sure how many people even use this as a daily driver anymore.
Click to expand...
Click to collapse
I still use two of them. Great little phones really. I see no need or use for 5.0 I think running this CM11 from you guys is about the end of the road for these phones. A great ride indeed. Ill be sticking around regardless just to see what happens. Thanks guys☺

[Q] MTK rom, installation aborted

The Afterlife6.0 was said to be compatible with my Nitro 401D which has the aame MTK no.
However, whenever I try to flash it (using cwm) it says installation aborted. It doesnt say any status about it eg Status 6 or Status 7 but i still used the fix for one which is trying to change the name in the updater script to fit the name of my phone but when I looked, it doesnt have that particular line for checking the name. And the other one was changing the directory of the lines in it but I didnt want to change it because i wasnt so sure about the directories myself.
Ive tried downloading from another source, still didnt work. Now Im wondering maybe its my phone so Ive been considering using SP flash to force it in(? Im still not quite sure what it does tho) and also change my custom recovery (currently cwm) to twrp or ctr. Maybe my phone cant flash anything at all so ive been also considering trying to flash a small file or like a test rom, are there any of those?
What should I do next? Im scared of forcing it in causr it says that if the phone has the wrong preloader my phone can never be recovered..

rexel325 said:
The Afterlife6.0 was said to be compatible with my Nitro 401D which has the aame MTK no.
However, whenever I try to flash it (using cwm) it says installation aborted. It doesnt say any status about it eg Status 6 or Status 7 but i still used the fix for one which is trying to change the name in the updater script to fit the name of my phone but when I looked, it doesnt have that particular line for checking the name. And the other one was changing the directory of the lines in it but I didnt want to change it because i wasnt so sure about the directories myself.
Ive tried downloading from another source, still didnt work. Now Im wondering maybe its my phone so Ive been considering using SP flash to force it in(? Im still not quite sure what it does tho) and also change my custom recovery (currently cwm) to twrp or ctr. Maybe my phone cant flash anything at all so ive been also considering trying to flash a small file or like a test rom, are there any of those?
What should I do next? Im scared of forcing it in causr it says that if the phone has the wrong preloader my phone can never be recovered..
Click to expand...
Click to collapse
Your Device name and SOC?

MTKcROM said:
Your Device name and SOC?
Click to expand...
Click to collapse
My device name is Arc Mobile Nitro 401D but I dont know what SOC means (system on a chip if i guessed right) and or what it refers to but if it refers to the MtkXXXX then its mtk6572

rexel325 said:
My device name is Arc Mobile Nitro 401D but I dont know what SOC means (system on a chip if i guessed right) and or what it refers to but if it refers to the MtkXXXX then its mtk6572
Click to expand...
Click to collapse
Do you install CWM successfully? Did you try another custom rom?

MTKcROM said:
Do you install CWM successfully? Did you try another custom rom?
Click to expand...
Click to collapse
From everything I have done on trying to root this phone, I guess MTKdroid tools installed CWM in the process. It is rooted now tho, checked with rootchecker basic. I havent tried any other roms since Afterlife 6.0 is the only one i found.

UPDATE:
Apparently, the CWM wasn't properly installed, my bad :crying:
I tried to install another ROM like Lollifox (will try MIUI later, still downloading) but I don't think I ported it successfully tho because it just showed installation aborted, no Status whatsoever.
I have now flashed Afterlife6.0. However, its now stuck at boot but a while ago it was on boot loop but after wiping caches and doing a hard reset, its now on boot forever. By boot I mean it just shows the Sony logo (supposedly the Arc Mobile logo before I flashed the rom) then the logo disappears and then its just a black screen (a black screen as in its still turned on and not a black screen as you would see when a phone is off).
I'll try to flash my stock rom and root it again so that I could flash other roms for now while waiting for your reply.

try stock rom on the official site. than try to update cwm and try rooting again.

I already fixed it by flashing the stock tho so no worries I guess.
I successfully ported Lollifox but I encountered a problem where I couldn't save anything because my phone doesn't recognize my SD card. It can be seen in the settings/storage though but what the rom can't do is recognize that the "SD card" is internal not external. Its sort of hard to explain, I have 2 storages: Internal memory and Phone storage. The internal memory is the default place where apps go while the Phone storage acts like the SD card of this phone but its internal as well ( at least that's how it acts on the stock ROM). I tried unmounting it (apparently I have that option on Lollifox but its internal so I don't know how that's possible) and remounting it but no dice. Also, since it doesn't recognize the SD card, it kind of explains why there's no USB mass storage option when I connect it.
I tried to port the MIUI and did the 2 ways of porting it told in the site where the rom came from but whenever I flash it, it boots up and gets stuck at the logo of MIUI.
I'm leaning away from Afterlife 6.0 now cause I can't really see it would be a better ROM (and you got to give it that the themes of MIUI and Lollifox are pretty AF) but I think its more suitable (still can't flash it tho) . Can anyone give thoughts on the best rom for this or a fix for these problems?

rexel325 said:
sometimes you need to format the phone memory at the beginning for one time after you install new ROM. Try that and restart the phone. One time i did this like this problem. Sorry for my english.
Click to expand...
Click to collapse

Solved
I think I already solved my own problem though. I just had to do a few tweaks and do a little bit of trial and error myself. However, I still couldn't flash Afterlife (also tried porting it myself and Im suppose to do a logcat or something but I lack free time) but I still have a rom flashed don't worry. Kind of feel sorry it feels like a waste of a thread.
Now Im asking for this thread to be closed(or atleast I think thats how it works cause I dont seem to have that option myself)
Thank you

Need help with Samsung Galaxy Amp 2

Okay this is my very first post. Let me start off by saying this is like my second Android phone. Previously I had the Galaxy J1 thru verizon but never had any issues. All my other phones have been all iPhones and I don't know anything about Android rooting/flashing etc. I've switched to Android recently after having practically every iPhone since the original. My problem is that I rooted the Amp 2 following the instructions from this thread https://forum.xda-developers.com/general/help/galaxy-2-rootable-t3384285/page4. It worked, the main reason why I decided to root the phone was to gain more system memory which I'm disqusted that Android takes up a lot of it's OS or w.e in its system memory and to bypass Cricket's stupid tethering block on the $60 plan without the mobile hotspot. Once I flashed the file provided via odin and rooted with kingroot, I would get a security notice that unauthorized changes have been made and that I would need to reboot my device, that was fine with me but I did so only to find that the message still appears every fifteen minutes so I disabled it with the package disable pro that I bought on the google play store. The problem I'm having is that I can't encrypt my phone and
SD card. Everytime I try to do so it wont work and I can't even get the SD card to mount properly so I unrooted the phone with kingroot and restored my phone back to factory. Still the same issue.... For whatever reason, it wont let me encrypt the phone again and I cannot get back whatever pictures from my SD card I had and a backup of all my contacts I imported from my J1. All I wanted was to try a custom recovery and ROM but I want to make the phone stock again because I been having so much issues. Like I've stated before I don't know anything on Android rooting and flashing, only iPhone jailbreaks. If somebody can help me out that will be great. I understand that the phone was given to me for free by porting over my number and that I can easily get another Android for cheap but all I want to do is get some assistance.
I downloaded the stock ROM file but I can't seem to flash it in Odin or using the recovery mode if that makes sense to anybody reading this thread. I've tried clicking the AP box to select my file but its a zip file and I can't get it to work.

Helppppp
Bump need help recovering back to a stock ROM. I must of screwed something up. I've downloaded the stock Rom over the internet but I can't seem to get it to work by Odin. CAN SOMEBODY HELP CUZ I CAN'T EVEN DOWNLOAD ANY APPS OFF GOOGLE PLAY!! PLZ HELPPPP

Need help with my S6!

Hello there,
Please forgive me if i posted this thread on the wrong place.
-I would've not posted a thread here unless this got serious, so i own a Samsung Galaxy S6, it's 1 year old phone, when i first got it, i used it normally like everyone else and had no problem with it, but my curiosity got me to root the phone, i still did not get any problem with it until i chose to add a ROM. I used NNE 5.1 S8 port and it was working well until it got my phone broken somehow.
-My phone started acting really strange after 2 months of activity of that new ROM, my phone just started restarting randomly and it got me worried, i thought it's an application problem so i first just factory reset it. It seemed it was not the problem on an application, so i chose to change my firmware to a stock one. I searched up recently on the newest firmware for S6 and i found out it's: XEF (France) , PDA (AP): G920FXXU6ERC1 and CSC : G920FOXA6ERC1 on 2018-03-22. I Downloaded 4 files: BL,AP,CP,CSC , and i found out about PIT on one of the posts in this forum (Filename: SM-G920F-ZEROFLTE_EUR_OPEN.pit).
-Before i flashed with Odin, i wiped System, Data, Cache and Dalvrik Cache. The firmware worked well but after 1 hour it started doing the same thing but now differently. It happend to me only 1 time that it froze up on an application, but i think that is just an app problem. The main problem is that when i lock my screen, i cannot unlock it anymore, it just freezes there until it restarts after a short period of time. After the restart, it just keeps going, restarts, asks for pin, restarts and so on.
I tried removing the sim card and putting it back in, did not work.
I tried Safe mode, still same.
Model of phone: SM-G920F
Current firmware: XEF (G920FXXU6ERC1)
Android version: Nougat (7.0)
If you can help me, or you know something about this problem, please repost here, i would be really grateful since this is my only phone

Ininstall twrp backup everything most important efs partition.
Install samsung switch and pray that it asks you to do an update. If not try to flash a diferent version of nougat for example November security patch and try again with samsung switch

lenovot said:
Ininstall twrp backup everything most important efs partition.
Install samsung switch and pray that it asks you to do an update. If not try to flash a diferent version of nougat for example November security patch and try again with samsung switch
Click to expand...
Click to collapse
How could samsung switch possibly help?
I did flash it with different versions already, but no luck :/.
I've been praying a lot for this lately but it is not working lol

Please Bump this!

try doing this.
1) go here: https://updato.com/
2) choose download 2 roms. 1 nougat and another marshmallow (to my knowledge, stock roms are one file. no more splits and unless otherwise stated... no need for pit)
3) first flash nougat using oden
4) try the phone for a few some time.
if after a set amount of time, phone works fancy and no issues present then it's solved.
if not... install marshmallow. then try again.
if all this fails then...
install nougat. as soon as possible afterwards install twrp.
boot into twrp and just leave it there. my twrp locks after a while and screen goes dark until user interaction (just like it's supposed to)
if the same thing happens then its a hardware issue... probably... (i have had my main board fail... kinda similar not similar issue... hope you dont have the same issue and that its just software related)
good luck.

In my case every time there was an update available it would download the whole firmware and by doing so you would get the most fresh and updated version. Also it updates every partition to match