Related
Hi Here Is The Samsung Galaxy Ace Asia-INDIA Firmware. Posted By Samfirmware.com
FROYO 2.2.1 Link HERE
Password : samfirmware.com
imranaryan said:
Hi Here Is The Samsung Galaxy Ace Asia-INDIA Firmware. Posted By Samfirmware.com
Link HERE
Click to expand...
Click to collapse
dude its not a ROM....
Its is the firmware For INDIAN SGA user
is it GB or froyo..???
It is Froyo latest release for INDIA
imranaryan said:
It is Froyo latest release for INDIA
Click to expand...
Click to collapse
dude u have any idea abt any developer who has started to work on ace development...??????
No man i think they will start working After GB update coz GB is around the corner only
Thanks for it.... i wanted to update my froyo DDKA7
imranaryan said:
Hi Here Is The Samsung Galaxy Ace Asia-INDIA Firmware. Posted By Samfirmware.com
FROYO 2.2.1 Link HERE
Password : samfirmware.com
Click to expand...
Click to collapse
thanksssssssss
dude how do i use this......
i tried using it with odin multi downloader but i dnt get boot,phone and other files .....
Dude please reply......i have upgraded to gingerbread and there are many bugs in it so its very difficult for me to use ma phone
digkong said:
Dude please reply......i have upgraded to gingerbread and there are many bugs in it so its very difficult for me to use ma phone
Click to expand...
Click to collapse
extract the rar file and use use the .tar as one package. check One Package , auto boot, and protect OPS , then select the ops and ten select this as one package file
imranaryan said:
extract the rar file and use use the .tar as one package. check One Package , auto boot, and protect OPS , then select the ops and ten select this as one package file
Click to expand...
Click to collapse
dude i tried ur method but whenever i try to install it it get stuck here
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
and ma phone does not restart....
and after that again i try to install GB and it gets installed properly and works fine.....
help???
digkong said:
dude i tried ur method but whenever i try to install it it get stuck here
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
and ma phone does not restart....
and after that again i try to install GB and it gets installed properly and works fine.....
help???
Click to expand...
Click to collapse
try re downloading the firmware from the provided link and again following the procedure
imranaryan said:
try re downloading the firmware from the provided link and again following the procedure
Click to expand...
Click to collapse
same problem like digkong
1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
blank screen
mine is working fine!
Please Help
guys even m having the same problem like digkong... please please help i need to downgrade the phone's version back to froyo
Galaxy ACE
Same pr0blem here......thats why I use Eur0pe firmware instead f Asia ....
In Asia Firmware s0me files are missing
try this
1)first flash using this S5830XXKA6 firmware
2) after that flash using new single file firmware. (in odn select one package for single file firmware)
Can you point me to any thread which guide on how to port a firmware? I want to port Galaxy Ace firmware on my Galaxy Fit for higher resolution.
OK i went to the thread started by raar but found no help there. Heres wat happened.
-Tried LG Update Software stopped at 4% then tried restarting it didnt work.
I can access my recovery i tried the Nandroid Stock restore it did the restore but phone wont boot still it goes straight to S/W Upgrade. Can any1 help with this again i can access recovery and use it but even after restoring stock rom from nandroid it wont boot it???
wrong section. Post in q&a.
Did you go back to stock recovery? Or did you try flashing this while running CWM?
also, this:
prettyboy85712 said:
wrong section. Post in q&a.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried using the LG Updater and i have the clockwork recovery i can access it jus no boot on the roms but straight to S/W Upgrade Screen
Seems like a lot of people are having this problem. I provide Android Flashing services for people in my area and I've gotten a few calls today about people who tried to use the LG Updater util and it failed at 4% and bricked their phone.
LG you fail big time. It's quite a process to get these phones working again.
dev_man77...you are too funny. Lol
Sent from my LG-P999 using XDA Premium App
it's not bricked....ugh. try using kdx on a 32 bit machine. worked for me first time after struggling with win 7 x64.
mods....please close this thread and move.
or someone can make this into a recovery stickie. i'm off to bed otherwise i'd write a guide right now. i recovered after an hour and a half of struggling with this on win 7 x64.
zgjbeta said:
I tried using the LG Updater and i have the clockwork recovery i can access it jus no boot on the roms but straight to S/W Upgrade Screen
Click to expand...
Click to collapse
restore stock 2.2 using cwm recovery, Flash stock recovery using nvflash, then try booting to 2.2 and trying the updater again.
******UPDATE FIXED THE PHONE THIS IS WHAT I DID************
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
5) Put the battery back into the phone and turn it on. Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Thread moved to proper forum. Please post in the correct sections!
How about some links?
Can you post links for download
zgjbeta said:
******UPDATE FIXED THE PHONE THIS IS WHAT I DID************
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
5) Put the battery back into the phone and turn it on. Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Click to expand...
Click to collapse
kolobok01 said:
Can you post links for download
Click to expand...
Click to collapse
here's the kdz file
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP999DW/ATMODW/V21e_00/V21E_00.kdz
and here's the kdz flasher
http://www.mediafire.com/?3hd4ao113lx8gq4
dev_man77 said:
Click to expand...
Click to collapse
You my friend just posted the most useless post in the history of xda.
Your contribution to this community is just phenomenal.
This is why people hate this site.
What a ****!
zgjbeta said:
******UPDATE FIXED THE PHONE THIS IS WHAT I DID************
As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
5) Put the battery back into the phone and turn it on. Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
What you will see:
The log window will immediatly show:
22:41:02 : Launching SW update
22:41:02 : Unpacking KDZ
Then it will stop for a while.
After this you will most likely see:
22:41:16 : KDZ file extraced
22:41:21 : Files were extracted.
22:41:21 : LGMobileDL Load.
22:41:21 : Port = 5
22:41:21 : Connecting to phone
22:41:33 : Check Phone mode = 1
It will pause again before you see:
22:42:08 : Phone type check.......
22:42:08 : LGMobileDL.DLL Loading....
22:42:08 : _SetAuthMark Fail
22:42:08 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
22:42:08 : _SetAuthMark Fail
22:42:08 : LoadCDMAPhoneData() Error
22:42:08 : _DetachDLL Call
22:42:08 : _DetachDLL Call End
22:42:08 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
22:42:08 : Param : moduleDir =
22:42:08 : Param : waitTime = 33000
22:42:08 : Param : UsbHighSpeed = 0
22:42:08 : Param : PhoneMode = 1
22:42:08 : Param : BinVersion = V21E_00
22:42:08 : Param : AuthMark = 0
22:42:08 : Call fn_StartUpgrade
Finally after another pause you should start to get spammed by the following message:
22:42:41 : CDMA: wParam = 2007, lParam = 0
22:42:41 : Model Dll Msg Not Found(2007, 0)
You will even hear the USB disconnect/reconnect sound several times.
The sound and spam will continue until the lParam counts to 100.
It should look like:
22:46:25 : CDMA: wParam = 2005, lParam = 100
22:46:25 : Model Dll Msg Not Found(2005, 100)
22:46:25 : CDMA: wParam = 2001, lParam = 0
22:46:25 : Model Dll Msg Not Found(2001, 0)
After it gets to 100, your phone will reboot to the LG logo before going
blank. After a few moments of the blank screen you will get the TMO G2x splash before being dropped back in to your working phone.
Be patient as this takes a while. If at any point the program freezes for more than a few moments, it's most likely going to fail and you will need to try again.
Hope this helps. =)
Thanks to everyone who helped figure this out.
Click to expand...
Click to collapse
I can confirm this does work. I am one person who has experienced every problem each person has expressed when attempting the update. I got that crazy status 2010-3015 error, couldn't find phone error, no communication error.
The trick is using mode XP if u have windows 7. I disabled the LG modem driver in windows 7 so Mode XP wouldn't have to fight with win 7 when the phone would USB connect/disconnect.
The above method works but it is VERY touchy as mentioned. I almost ended up sending my phone to LG but I kept with it ...reflashing stock recovery via nvflash in mode xp and letting the LG mobile tool download drivers and installing them is what caused my app to no longer freeze when connecting my phone.
I spent about 8 hours trying to fix my phone. Its possible but u must be patient and persistent. As long as your comp can recognize your phone when u plug it in, i promise u can debrick it. Ill post my steps when I get to work.
Sent from my LG-P999 using XDA App
okay here is the trick***
i was getting that error 3012 over and over again... and i saw ergibson83's post about disabling drivers for the lg on windows 7... what i did was this.
when you are running kdz using xp mode on windows 7 ultimate and it begins the IParam count to 100, keep your eye on the usb connectivity. Up top of the screen of XP Mode, you will see the usb tab. when you hear windows 7 trying to grab the device, go up top and reattach the LG Modem and it will continue the count.
Around 50, it did it again.. so i clicked reattach for the second time. Then it reached 100 and i was golden!
now i have beautiful gb running flawless
Hope this works for those running XP Mode.
i have windows 7 how can i get it to xp mode plz help
Gryncc said:
i have windows 7 how can i get it to xp mode plz help
Click to expand...
Click to collapse
Download it from the Microsoft site. Its free
Sent from my LG-P999 using XDA App
zgjbeta said:
OK i went to the thread started by raar but found no help there. Heres wat happened.
-Tried LG Update Software stopped at 4% then tried restarting it didnt work.
I can access my recovery i tried the Nandroid Stock restore it did the restore but phone wont boot still it goes straight to S/W Upgrade. Can any1 help with this again i can access recovery and use it but even after restoring stock rom from nandroid it wont boot it???
Click to expand...
Click to collapse
After a week with the same problem and intensive google search, did this:
Booted into XP downloaded "mcci r firmware update driver for mtk.exe" installed the same (does not install in Win7 environment). started the KDZ_FW_UPD_EN tool and using the update start in the main window managed to update successfully to Gingerbread, now I need to get out of T-mobile's clutches and get cyanogenmod..Any suggestions. Hope my workaround helps.
Before this success I tried everything possible including a visit to a LG Service centre in Chennai who did try sincerely to help but could not. The past week was really frustrating which I do not want to list here but my request is don't give up.
I subsequently checked with LG Service centre telling them I succeeded and described the way I did it. They said they also have XP with the firmware updated and tried it out of 2 different PC's but could not manage the update. Then I tried recollecting what I did try differently and I could see this may be the trick that enabled it to succeed. Before I tried the firmware update. I tried the tool clicked on Phone information in the main indow (both in Win 7 and XP) and then clicked on update start at the bottom of the subsequent window. The tool did collect information and went all the way extracting files rechecking EMEI upto MTK start when the tool kept crashing and failed to update.It is only after this failure did I try the firmware update and running the tool when it succeeded.
Thank my stars I did not format my XP partition which I wanted to last month but did not find the time. If only one person is benefited by this post I would be most glad
[Solved here: http://forum.xda-developers.com/showpost.php?p=21196088&postcount=6 ]
I'm trying to install CWM5 according to descriptions given here on the forum, but neither in the Recovery Mode (Home+Power) are new options nor do I have a CWM app in my drawer.
Base ROM is Creed's 1.3 ROM.
Unfortunately Odin gives me the following Message:
<CODE>
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "recovery.img"
<1> e - unknown file - "ANDROID!�4"
<1> set download environment.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
</CODE>
Any hint what to do?
Thx
Is it possible to flash a ROM containing Clockwork mod already? If yes, which one?
thx
if i not mistake, not all frimware support CWM
Creeds should.
Download the attachment and retry flashing CWM.
Also check if your drivers are up to date
SOLVED
I did everything again:
Installed Creed 1.3 as described but what I did differentely is that I used another BENI_v1.0.ops file from here:
http://droidangel.blogspot.com/2011/05/samsung-galaxy-fit-s5670-original-stock.html
Now it NEARLY works: "install custom zip" doesn't seem to work right now... /edit: WORKS
Thanks to all.
problem restoring custom rom
Now i hv chocobread in my gfit. Before flashing the custom ROM I did install the cwm recovery successfully till last step. But me the problem is I want to go back to stock ROm and I don't kknow the correct procedure to do so. PLZ help me soon.
Mukrpat said:
Now i hv chocobread in my gfit. Before flashing the custom ROM I did install the cwm recovery successfully till last step. But me the problem is I want to go back to stock ROm and I don't kknow the correct procedure to do so. PLZ help me soon.
Click to expand...
Click to collapse
Just flash the stock rom that u want with Odin.
Download the Original ROM and flash it via ODIN.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a Collection Of Some Miui Apps
*Contacts.apk
http://www.mediafire.com/download.php?fucgegil1rey71i
*Browser.apk
http://www.mediafire.com/download.php?04h90zc8uvfstdr
*Calculator.apk
http://www.mediafire.com/download.php?h1kzxaybhc5xc55
*Gallery.apk
http://www.mediafire.com/download.php?uruau0230jhoipf
*Music.apk
[ See the Attachment Below ]
* Calender.apk
http://www.mediafire.com/download.php?8ow4i3rf6udjsn3
*FileManager.apk
http://www.mediafire.com/download.php?qntv8bdbnqt87ji
*Camera.apk
http://www.mediafire.com/download.php?x4t5mwxl4p35d32
*MiTalk.apk
[ See the Attachment Below ]
If You Have More Apps Just Upload To this Thread
Press THANX If U Like My Work
Thank you,... will try them now
is the contacts app change the in-call display? i hope so
Hey thanks! I'll add this in my rom for sure!
Very nice. Thanks.
anyone can post more screenshot pls
I will try it asap.
Hi, thanks for MIUI apps . I found calender ,contacts like apks are not overwriten on stock Rom apks , although I am using sense Rom .can you rename them ? I am also looking for original miui launcher .thanks again .
Friends , be careful while using these apps
They dont work on all custom Roms. Also i feel that what we have is better.
If ur replacing ur system apps thru flashing Pls Pls Pls make a nanroid backup in CWM else u shall have to flash ur rom again
music app
I installed the miuimusic app but it force closes on my galaxy fit.
I use Creed's Rom.
can MIUI app installed at fit?? (sorry 4 language T..T) i'll try. Thanks dude
How can add this app to room? using root explorer?
viettanpt said:
How can add this app to room? using root explorer?
Click to expand...
Click to collapse
Just install as normal apk .
idhbar said:
Just install as normal apk .
Click to expand...
Click to collapse
if want to remove system app then
1) go to root explorer and change "mounted as R/O" to "mounted as R/W"
2) in options search the keyword ( like if want to remove "browser" from system then search for browser )
3) in result you will see the browser.apk and some files relating with it..
4) then delete the files only relating with it...
5) now you have successfully removed the system app..
now you can install any app for replacement of that..
i have tried it and enjoying....
press thanks if i helped you..
---------- Post added at 08:28 PM ---------- Previous post was at 08:25 PM ----------
viettanpt said:
How can add this app to room? using root explorer?
Click to expand...
Click to collapse
idhbar said:
Just install as normal apk .
Click to expand...
Click to collapse
if want to remove system app then
1) go to root explorer and change "mounted as R/O" to "mounted as R/W"
2) in options search the keyword ( like if want to remove "browser" from system then search for browser )
3) in result you will see the browser.apk and some files relating with it..
4) then delete the files only relating with it...
5) now you have successfully removed the system app..
now you can install any app for replacement of that..
i have tried it and enjoying....
press thanks if i helped you..
tejasar said:
if want to remove system app then
1) go to root explorer and change "mounted as R/O" to "mounted as R/W"
2) in options search the keyword ( like if want to remove "browser" from system then search for browser )
3) in result you will see the browser.apk and some files relating with it..
4) then delete the files only relating with it...
5) now you have successfully removed the system app..
now you can install any app for replacement of that..
i have tried it and enjoying....
press thanks if i helped you..
---------- Post added at 08:28 PM ---------- Previous post was at 08:25 PM ----------
if want to remove system app then
1) go to root explorer and change "mounted as R/O" to "mounted as R/W"
2) in options search the keyword ( like if want to remove "browser" from system then search for browser )
3) in result you will see the browser.apk and some files relating with it..
4) then delete the files only relating with it...
5) now you have successfully removed the system app..
now you can install any app for replacement of that..
i have tried it and enjoying....
press thanks if i helped you..
Click to expand...
Click to collapse
We can't replace the browser cuz it contains some modules. And I researched on it but could not. find a solution.
I want yhe alarm can u provide ?
Sent from my GT-S5670 using XDA App
I am having a problem, I flashed MIUI files for Fit on my Galaxy Gio through CWM but it gave me "Installation Aborted!" Error ... After that I restarted my Gio and it stuck on boot loop, I tried to get into recovery but I was unable to access it.
Now when I want to flash CWM recovery for Gio through Odin it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
And when I try to install stock firmware it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
pakistanish said:
I am having a problem, I flashed MIUI files for Fit on my Galaxy Gio through CWM but it gave me "Installation Aborted!" Error ... After that I restarted my Gio and it stuck on boot loop, I tried to get into recovery but I was unable to access it.
Now when I want to flash CWM recovery for Gio through Odin it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
And when I try to install stock firmware it gets stuck on
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
Click to expand...
Click to collapse
wch files r u talking about? miui apps or something else...
OK Now I have successfully flashed the stock rom but now my phone gets stuck in boot loop and I cannot get into recovery
Radio app?
Radio app same that u will find in cm7 music edition or miui edition
SAMSUNG GALAXY FIT
CREED's ROM v1.7.2
Few days ago my galaxy s plus stopped responding and I was trying my level best to bring it back on the stock ROM. But in vein, nothing seems working right for me, hence I am here to seek your help. My first and foremost issue is with getting in to the recovery mode, as that will solve most of my problems. I have tried to install different versions of CWM recovery, including the latest as per the following thread http://forum.xda-developers.com/showthread.php?t=2204700 . Though I get PASS status in ODIN, the phone keeps on getting in to Download mode wen I press Volume Up+Power buttons. Here's the ODIN message trace
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
When the ODIN reaches "Close serial port and wait until rebooting.' , my phone moves out of Download mode and shows me the battery status, eventually blinks to off. But ODIN takes another few more minutes to finish. It's the same situation when I install the stock ROM, the phone goes out of Download mode after the message "Close serial port and wait until rebooting". So need your help to sort it out, I am thoroughly looking through all existing threads in XDA for GT-I9001 phone. Please let me know any possible fixes? And the next steps.
any help folks
I am getting more or less the same issue while flashing the stock ROM as well on GT-I9001. The ROM getting installed properly as per ODIN, but the phone never getting rebooted during the entire process. So I am suspecting there's some thing wrong, I should some how be able to get in to recovery mode to clear of the cache and other previous data. Please give me pointers as I am badly stuck with this issue.