Enable Android USB gadget projector support means
i have searched up but could not find anything please help
Shery4life said:
Enable Android USB gadget projector support means
i have searched up but could not find anything please help
Click to expand...
Click to collapse
Hi,
I'm going to assume that you have installed ARHD 3.6.7 or 4.1.7,
and have not updated your sig.
Mike was asked that question,and he said that he does not have a projector.
But that if you did have one ,then this ROM has the ability to interact with it.
I would think that you would need the appropriate cables.
Related
I was given an ethernet/usb dongle a few days ago and i haven't been able to find the drivers for linux. So now i'm in doubt.... Are there any drivers out there so that i can use my jp1082-030818 on my motorola xoom?
Drivers found!!!
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Can you help me find the driver for windows (XP and 7) ? Thank you in advance!
Very thanks .
How do I install these drivers
I do have an Asus tf101 and usb dongle jp1082, but I don't know how to install these drivers.
Colud you help me please. I'm a newbie in android.
Herrpeter said:
I do have an Asus tf101 and usb dongle jp1082, but I don't know how to install these drivers.
Colud you help me please. I'm a newbie in android.
Click to expand...
Click to collapse
Yes, please. Me too, I have the TF101 and the same LAN adapter but it seems not working! Thanks in advance .......
I was given an ethernet/usb dongle a few days ago and i haven't been able to find the drivers for win 7 /64bit. jp108 NO-030818
plz hellp me
[email protected]
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Can you post a tutorial on how you installed the android drivers? I tried to open the file "README" in the android directory and it's just gibberish.
The Poetic Vampire said:
Guys, after a long search, i finally managed to communicate with the chinese company that sells these dongles on ebay and they sent me a link for the drivers. I'm attaching the drivers here for all of you who need them like i did.
PS- i'm attaching ALL drivers for the dongle, not only the android ones, so you guys can have them too, if you need them.
Click to expand...
Click to collapse
Thanks! The one I ordered is arriving any day now!
Tutorial for Android
vatvedt said:
Thanks! The one I ordered is arriving any day now!
Click to expand...
Click to collapse
Yes, but could you kindly post a tutorial on how you installed the android drivers?
thanks and merry xmas to all!
guys, buy a better dongle. I tried to port those drivers over a year ago. Those drivers are ancient and not compatible with the .39 linux kernel.
I am using a dongle from o2 in the UK. its called the e173 from huawei and it only cost £10 and could be unlocked for free. Can someone tell me how I can use that on the xoom through a otg cable?
Thanks
Sent from my GT-I9300 using xda app-developers app
[email protected] said:
Yes, but could you kindly post a tutorial on how you installed the android drivers?
thanks and merry xmas to all!
Click to expand...
Click to collapse
Didn't have to install any drivers. I tested it on a iMito MX1 running 4.1.x, and it runs out of the box. For some reason I only got low speeds (5-6mbit). Don't know why that is though.
hi
i'm looking for this driver, my android does not detect the jp1802. I see that the proposed driver here is not compiled and i don't know how to do. Is there a tuto?
there is somewhat a tuto in readme.txt, however part is written in chinese:
编译qf9700_android驱动
5.1 转到驱动代码目录下 ： cd qf9700_android/
5.2 依据实际情况将驱动中的Makefile修改有关参数
KERNEL_DIR := 此项需要依据实际情况修改为kernel源代码的位置，比如: /root/linux-2.6.28-test/
KERNEL_VERSION := 此项需要依据实际情况修改为kernel源代码的版本，比如： 2.6.28-15等，
也就是make menuconfig左上看到的版本名称
5.3 编译驱动
make
there are also some .cmd files
someone to read between lines?
I have the tablet smart pipo s1 and I don't find anything about its usb driver, I don't know if there's a generic driver for those tablet with strange brand or something any help will be helpful.
thanks in advance.
blashadow said:
I have the tablet smart pipo s1 and I don't find anything about its usb driver, I don't know if there's a generic driver for those tablet with strange brand or something any help will be helpful.
thanks in advance.
Click to expand...
Click to collapse
I'm in the same boat. Just got mine the other day.
I finally figured out why adb can't enumerate the tablet -- there's no USB driver! Obviously, there must be somewhere, but where?
webitube said:
I'm in the same boat. Just got mine the other day.
I finally figured out why adb can't enumerate the tablet -- there's no USB driver! Obviously, there must be somewhere, but where?
Click to expand...
Click to collapse
FOLLOWUP: I think I found the product page from the original manufacturer: It's full name is PiPO P733 (S1) and is on pipo.com.cn. (I can't post a link because I don't have enough posts on xda).
I sent a quick email to them asking for a Windows 7 device driver for this tablet. I'll reply back to this thread when I hear back.
~Ron
webitube said:
FOLLOWUP: I think I found the product page from the original manufacturer: It's full name is PiPO P733 (S1) and is on pipo.com.cn. (I can't post a link because I don't have enough posts on xda).
I sent a quick email to them asking for a Windows 7 device driver for this tablet. I'll reply back to this thread when I hear back.
~Ron
Click to expand...
Click to collapse
Hi,
any update about this USB driver?
I can't find it
Thank you so much!
S.
salllyna said:
Hi,
any update about this USB driver?
I can't find it
Thank you so much!
S.
Click to expand...
Click to collapse
I attached the usb driver that I received from my vendor, LightInTheBox.com. Unfortunately, it didn't work for me. Maybe you'll have better luck.
After that, PiPO sent me to instructions to flash the ROM: (URL Removed because I don't have enough posts. If you need this, PM me, and I'll send it to you.)
On the PiPO page, you'll find links to the RKBATCHTOOL which handles the update and a link to the page for the firmware.
Please note, that the updated firmware didn't fix my issue either. It did, however, allow me to use the Chrome browser. (Chrome crashed with the original firmware.)
~Ron
P.S.: salllyna: I'll send the URL to you via PM.
webitube said:
I attached the usb driver that I received from my vendor, LightInTheBox.com. Unfortunately, it didn't work for me. Maybe you'll have better luck.
After that, PiPO sent me to instructions to flash the ROM: (URL Removed because I don't have enough posts. If you need this, PM me, and I'll send it to you.)
On the PiPO page, you'll find links to the RKBATCHTOOL which handles the update and a link to the page for the firmware.
Please note, that the updated firmware didn't fix my issue either. It did, however, allow me to use the Chrome browser. (Chrome crashed with the original firmware.)
~Ron
P.S.: salllyna: I'll send the URL to you via PM.
Click to expand...
Click to collapse
did not work for mee too
my pipo S1 table auto installed a driver when i plugged it on my pc/laptop so i was wondering it might be ur OSversion or other stuffs
Pipo smart S1 driver
You can download a program called moborbo, install it in your PC, Connect your Pipo tablet through the USB to your PC and then open the program and it will install the driver automatically. You can watch the tutorial video for this in youtube just open youtube and write on search Pipo Smart S1 RK3066 ROOT. Sorry, i can't put the url as am a new member. Hope it helps you
Just picked up a S1 last week and was looking around for rooting instruction for it. I ran into this website http://www.topnotchtablets.com/RK3066firmware which has the batch tool, some instructions and custom firmware. Haven't tried it yet, but I thought I would share. Should note that the custom firmware is supposed to have a fix for gameloft games!
Just picked up one of these this week but there doesn't seem much info on xda so i thought id share this -
http://chinagadgetsreviews.blogspot.ro/2013/03/pipo-smart-s1-firmwares-gathered-on-one.html
Now it is a solved matter, also check here:
http://chinagadgetsreviews.blogspot.ro/2013/01/how-to-install-rockusb-driver-v20-on.html
I have a Tablet Philips "PI3900" acquired in Brazil.
In Brazil your exact model is the "PI3900B2X/78", but in other countries may have some variation in the model designation.
But worldwide model designation starts with "PI3900".
I want to develop some tests on it.
I downloaded a ROM for it in Chinese Philips website and think it's the same model.
How do root this device?
How do I start developing a custom ROM?
I'm looking for any useful information.
For rooting you can look into this thread:
http://forum.xda-developers.com/showthread.php?t=2130276
Sent from my GT-S5360 using Tapatalk 2
Tablet Philips PI3900
I found more information on the PI3900:
- OTG function enabled.
Anyone else have any info on this tablet?
adirx said:
I found more information on the PI3900:
- OTG function enabled.
Anyone else have any info on this tablet?
Click to expand...
Click to collapse
I have this tablet
How do you know that otg is enabled?
you tried it?
I have problems with heavy games and with sound codec ac3
Same problem here
sando0710 said:
I have this tablet
How do you know that otg is enabled?
you tried it?
I have problems with heavy games and with sound codec ac3
Click to expand...
Click to collapse
I have the same problem here.
Want to root my Philips PI3900, android 4.1.1
Did you solve it? If you did please tell me how.
Thanks.
haraiza said:
I have the same problem here.
Want to root my Philips PI3900, android 4.1.1
Did you solve it? If you did please tell me how.
Thanks.
Click to expand...
Click to collapse
I have a PI3900B2X/78 and rooted it with vRoot as per http://forum.xda-developers.com/showthread.php?t=2434453; use the last version as it is readable.
I found reading the build.prop file that the product name is PI3900_98.
Do you have the source for the OS?
my phone not supported otg by default if i rooted my phone i can use otg option
XDA Visitor said:
my phone not supported otg by default if i rooted my phone i can use otg option
Click to expand...
Click to collapse
So what's the question?
If you need/want OTG, then roo tyour device.
In case you want to root your device and you wanted to ask how, then you need to specify your device name, exact model/type and the firmware you are running now.
Then you can search xda for your device name (e.g. at the top of xda page in browser where "Type to find device..." is written) and a rooting guide.
Good luck !
Thread closed. Thank you!
Just a little question, can you give me every single details of my Lenovo A536? That would be great!
And also, is my phone support OTG?
(Tell me if my phone only have the hardware, or both hardware and software...)
Please answer!
FTRS said:
Just a little question, can you give me every single details of my Lenovo A536? That would be great!
And also, is my phone support OTG?
(Tell me if my phone only have the hardware, or both hardware and software...)
Please answer!
Click to expand...
Click to collapse
If you are rooted, just install the Stick Mount app like I already suggested to you, if it works then your device supports OTG, if it doesn't work then your device doesn't support OTG, this will answer your question without having to do any searching or looking at your device specifications. It either works or it doesn't.
But I believe your device does not have the hardware to support OTG.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE