All right, so, I have tried everything I can think of, but nothing has worked, so I decided to try asking here. I am have been on the CM10 builds for about a week, and I am loving them. I never really liked sense, so an AOSP JB rom is great (aside from the battery life). Before CM10, I was on ViperXL, and LTE worked fine, but after switching to CM10 (or any other AOSP roms) it just stops working. I can get everything else, Edge, 3G, and HSPA, but LTE just won't work. Just a couple hours ago I did a wipe and a clean install of the October 3rd nightly, and I am still having the issue.
One thing I haven't tried is flashing a 4.0.3 rom, and then the CM10 rom, but the FAQ says that issue has been fixed so I doubt it would help.
Anyway, thanks in advance for the help!
Check your APN settings. These settings worked for me.
http://forum.xda-developers.com/showpost.php?p=19434188&postcount=2
I've had the exact same issue. I'm on Rogers too. I've double and triple checked the APN (ltemobile.apn) and it is definitely correct. I first noticed this on PA, and now get the same thing on CleanROM. Yesterday, I ran the Rogers RUU and that got LTE. So I went back to CleanROM (same radio image) and now only get HSPA. If I try to use the ltemobile.apn APN it fails with the message "Connection failed due to incorrect APN setting." Hope this info is useful for anyone with educated guesses
andyondroid said:
Check your APN settings. These settings worked for me.
http://forum.xda-developers.com/showpost.php?p=19434188&postcount=2
Click to expand...
Click to collapse
I checked, I had all that set correctly, still no LTE
If anyone else has suggestions, I would be glad to hear them.
person66 said:
I checked, I had all that set correctly, still no LTE
If anyone else has suggestions, I would be glad to hear them.
Click to expand...
Click to collapse
From my experience i've had no issues with Rogers LTE on Sense roms and CM10. I would probably try deleting the APN and re-adding it.
I'd also check the network type. In dialer, dial *#*#4636#*#* and under Phone Information check that the network type is set to 'GSM/WCDMA/LTE auto'
Beyond that, trying running the latest Rogers modem/baseband. I'm using 0.18as.32.09.28L with no issues.
I've only had my One X a week so beyond this, i'm out of ideas.
andyondroid said:
From my experience i've had no issues with Rogers LTE on Sense roms and CM10. I would probably try deleting the APN and re-adding it.
I'd also check the network type. In dialer, dial *#*#4636#*#* and under Phone Information check that the network type is set to 'GSM/WCDMA/LTE auto'
Beyond that, trying running the latest Rogers modem/baseband. I'm using 0.18as.32.09.28L with no issues.
I've only had my One X a week so beyond this, i'm out of ideas.
Click to expand...
Click to collapse
there is an option in setting...you have to change from wcdma to lte...in mobile settings...
i can confirm lte works with cm10...worst case try flash a 4.0.3 rom then flash cm10..
Here's my experience: you no longer need the sense flash method. Make share you do a system, factory, cache and dalvik wipe. Do system and factory twice, as it did not always 100% work for me.
Then boot up. Go to apns and delete all the non-lte ones. Set the lte/wcdma/gsm setting there.
Next go to *#*#4636#*#* in dialer. Check phone information so that network says lte/gsm(prl).
Reboot and hopefully it will all stick.
Also I noticed that the default lte APN has port 80 and not MMS port 80. Make sure that is correct
Sent from my One XL
Okay, I've made some progress on this. I did a factory reset and system wipe from TWRP recovery then re-installed CleanROM 5 from scratch. When it booted up I added the ltemobile.apn APN. This time it successfully connected to the APN, but it still did not get past HSPA. I then booted back into recovery and replaced /system/build.prop with the build.prop from the Rogers 1.94.631.3 stock ROM (http://forum.xda-developers.com/showthread.php?t=1812544). When it booted up it got LTE coverage.
So there must be something key in build.prop required to get LTE to connect. I've attached the two build.prop files in case anyone with trained eyes wouldn't mind diffing them and suggesting what setting might be the key to unlocking LTE.
With CM10 I had to delete the APNs and re-add them, even if they were correct. Not sure why.
denversc said:
Okay, I've made some progress on this. I did a factory reset and system wipe from TWRP recovery then re-installed CleanROM 5 from scratch. When it booted up I added the ltemobile.apn APN. This time it successfully connected to the APN, but it still did not get past HSPA. I then booted back into recovery and replaced /system/build.prop with the build.prop from the Rogers 1.94.631.3 stock ROM (http://forum.xda-developers.com/showthread.php?t=1812544). When it booted up it got LTE coverage.
So there must be something key in build.prop required to get LTE to connect. I've attached the two build.prop files in case anyone with trained eyes wouldn't mind diffing them and suggesting what setting might be the key to unlocking LTE.
Click to expand...
Click to collapse
Any chance you have figured out how to get it working on CM10? I tried the other suggestions, like deleting the apns and then entering them again, wiping everything, and I checked that the network was set to lte/gsm(prl). Still no LTE unfortunately.
person66 said:
Any chance you have figured out how to get it working on CM10?
Click to expand...
Click to collapse
Nope. I'm still rockin' HSPA on CleanROM. Some day I will probably mess around with the build.prop to see if I can figure it out. I really have no idea though. You should try running the RUU just to see if you get lte like I did.
Just got LTE working on Rogers with CM10, finally!
1.) First, I flashed the official stock Rogers ICS Baseband/Modem. You can check to see if you already have the correct modem by going to Settings, choosing About Phone, and checking your "Baseband version".
2.) Second, I corrected the APN settings that come default with CM10. The APN for ltemobile.apn need to be change, since the CM10 settings incorrectly set the Port as 80 (should be left blank), set the MMS port as blank (should be "80"), and set the APN type as something along the lines of 'default' (should be either "*" or "internet + mms"). Make sure you click the menu hardbutton and choose "Save", and go back and check to see that it did indeed save. I also selected the Rogers LTE amonst the list of the four different APNs (Rogers, Rogers LTE, Rogers Tethering, Rogers WAP - not sure if this last step makes a difference but this is what I did anyway).
3.) Go to your phone dialer, and type in *#*#4636#*#*. A "Testing" menu should pop up. Select "Phone information", scroll down to the bottom and under 'Set preferred network type", I chose "LTE/GSM auto (PRL)".
4.) Voila, this worked. I did not need to restart, just gave it a minute and the icon changed from H+ (HSPA+) to 4G (LTE). You can confirm LTE status by either doing a speed test and seeing the results, or go to Settings, scroll to the bottom and choose "About Phone", then "Status", and under "Mobile network type" it should say LTE. On mine it said "LTE:13".
Others, please experiment and try to see if you get the same results.
Cheers
adams03 said:
Just got LTE working on Rogers with CM10, finally!
3.) Go to your phone dialer, and type in *#*#4636#*#*. A "Testing" menu should pop up. Select "Phone information", scroll down to the bottom and under 'Set preferred network type", I chose "LTE/GSM auto (PRL)".
Cheers
Click to expand...
Click to collapse
This I think is the main thing. I'm on AT&T but up until just recently every time I flashed an AOSP ROM I had to go into this menu and set it to LTE/GSM. It would always default to WCDMA Preferred for some reason. It doesn't happen anymore but it used to happen every time I flashed an AOSP ROM or even when I rebooted. I had to change it and then it would be fine until I rebooted again.
Thanks, this worked on my SGH-I727R on Rogers.
I wonder why the apn settings load wrong in CM10 when the system reads them from the SIM card...? This never happened to me on previous aosp ICS roms.
what setting do you have for the tethering apn?
i am having issues having other devices running off my hotspot
this is what i currently have for tethering
Name: Rogers Tethering
APN: ltedata.apn
Proxy: Not set
Port: Not set
User Name: Not set
Password: Not set
Server: Not Set
MMSC : Not set
MMS Proxy: Not set
MMS Port: Not set
MCC : 302
MNC: 720
Authentication Type: Not Set
APN Type: dun
thanks in advance
g35thrilla said:
what setting do you have for the tethering apn?
i am having issues having other devices running off my hotspot
this is what i currently have for tethering
Name: Rogers Tethering
APN: ltedata.apn
Proxy: Not set
Port: Not set
User Name: Not set
Password: Not set
Server: Not Set
MMSC : Not set
MMS Proxy: Not set
MMS Port: Not set
MCC : 302
MNC: 720
Authentication Type: Not Set
APN Type: dun
thanks in advance
Click to expand...
Click to collapse
It's funny you posted this. I am on AT&T and recently I have not been able to get tethering devices to work, but up until recently, I have never had a problem.
my bud has the same phone unrooted with rogers gonna check his apn settings and see if they differ.
K well I just got off the phone with rogers. All the APN setting are fine but still no tethering. Well if it don't won't it don't work. If anyone is successfully tethering on cm10.1 build Jan 12 2013 with Rogers plz let me know.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I have an S-OFF ATT HOX. SuperCID. Installed the Avatar 4.2.2 rom. Works great! Snappy, and pretty! Only problem is I was only able to get 4G speeds. After a 30 min conversation with ATT to confirm there were no issues on their end, I looked at the APN settings for PTA. The APN settings were incomplete.
Normally the APN type has default,mms,supl and hipri but my installs (3x) never included. I attempted to add the hipri to the APN and even create a new APN, but the changes would never save.
Any thoughts?
Is the APN locked from being edited? Try just making a new APN with the correct settings.
Avata 4.2.2 APN woes
Its not locked. I can get into the existing 6 APNs and create a new one, but there is no save button on a new APN or existing APN. But I guess by definition means it is locked. I speculated just pressing back auto saved the entered settings but alas, no LTE goodness
Weird. I've seen where the APN is locked from editing (Save button is grayed out) such as the default APN on the AT&T stock ROM. But even then, you can create a new APN and save it. Never seen where it locked you out from editing and saving altogether.
Hello, I am trying to use D2G on the Ting's GSM network (which is T-mobile's network). I am running the cyanogenmod 7 rom (with gingerbread kernel, I think).
I followed band unlock procedures here:
https://docs.google.com/document/d/1l15c0hxwQFAh1e1ewVMe3QUy4d1Laa51C2WCmBizSxA/edit
After putting in the sim card from Ting, it connects to T-mobile's network and I am able to make calls and texts, which is great.
However, I am unable to use data over the network. Ting has its own apn settings, which I have tried to enter. But after I add the apn in apn settings, the page remains blank and I am unable to select the apn that I have added.
To get around this, I have tried replacing /system/etc/apns-conf.xml with one I created myself with Ting's info, reset apn to default and reboot. Unfortunately, the phone still isn't connecting to data, and the apn page in settings remains blank.
So does anyone know what I should do? Would flashing a different rom help, is this a cyanogenmod issue?
Thanks