Related
When flashes go wrong things can get bad.with the vibrant I just odined to stock...through download load. Will we get something similiar for the greatest smartphone ever LG g2x
Luthien1 said:
When flashes go wrong things can get bad.with the vibrant I just odined to stock...through download load. Will we get something similiar for the greatest smartphone ever LG g2x
Click to expand...
Click to collapse
NV Flash
its not the same. odin was a backup in case you couldnt even get into recovery, so there was download mode as a failsafe....which was through odin.. there has to be something like this available... anyone know.. or are we sol if we mess up bad
Im wondering this as well...my friend flashed a rom on the G2x and the wifi is broken. Rom manager won't flash into recovery. Used my Sim card which has internet but the phone won't recognize the internet. Tried the power+ volume buttons on boot up but nothing happens. Any idea on how to get back to stock? Rom is eagle's blood
You would need to flash CWM through NVflash
ROM manager will not flash CWM, it looks like it did but is actually a fake flash. That's why you need to do it through nv flash.
Sent From My G2x EB 1.07
Yes. You flash back to stock with the KDZ file and the KD flasher program.
Sent from my LG-P999 using Tapatalk
downloaded nvflash and drivers, have usb debug mode on but when i do anything on nvflash it says no usb connected?
nvm got everything done thanks a lot!
I believe that there's the program used to flash KDZ files, I guess that could restore EVERYTHING back to stock.
moshe22 said:
You would need to flash CWM through NVflash
ROM manager will not flash CWM, it looks like it did but is actually a fake flash. That's why you need to do it through nv flash.
Sent From My G2x EB 1.07
Click to expand...
Click to collapse
Koush and Cyanogen said ROM Manager is not doing a fake flash. After flashing the rom you have to immediately boot into recovery using rom manager. It them flashes the new recovery right after boot. The recovery partition is not available when the phone is in normal mode. If you don't do an immediate boot into recovery through ROM Manager then the recovery is not properly flashed. If you have updated to GB then the first time you must do the NVFlash method as there is no way to root the phone any other way at this time.
jboxer said:
Koush and Cyanogen said ROM Manager is not doing a fake flash. After flashing the rom you have to immediately boot into recovery using rom manager. It them flashes the new recovery right after boot. The recovery partition is not available when the phone is in normal mode. If you don't do an immediate boot into recovery through ROM Manager then the recovery is not properly flashed. If you have updated to GB then the first time you must do the NVFlash method as there is no way to root the phone any other way at this time.
Click to expand...
Click to collapse
It is fake in the sense that no matter what you do it isn't on the actual recovery partition and if the phone goes to hell in a handbasket then you have to flash one through NVFLASH anyways. Koush just happens to have a vested interest in people using Rom Manager.
Yes, STAY THE HELL AWAY FROM ROM MANAGER. Seriously, you're just asking for trouble.
I use rom manager all the time. It works great for downloading and flashing roms on the fly... but just NVFlash first.
NVFlash takes like 3.5 seconds and your done. Nandroid backup and your good.
Then either download Rom manager or manually download and copy it to your SD card. Very very simple. Easiest phone ever to get going. You don't even need to worry about rooting first.
You'll gain root after flashing s custom rom. MIUI is my choice right now. CM7 is having problems after they merged the LG GB source.
MIUI 8.19 is found in the rom forums. Weapon is also nice but lacks some extras I'm used to.
LG G2x - 2.3.5 MIUI Love
Asus TF - Custom 3.2
Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin
After painstaking deliberation, they had reached the decision to eat gingerbread. Cautious and deliberate by nature, they opted to install stock 2.3.6 using Kies, presumably the safest choice. KB5 had been having a hard time connecting to the pc via usb with debugging active - no choice was given how to connect to pc, and Kies was not recognizing the phone. Finally bypassing the usb hub allowed Kies to recognize the device, and after a long download, a usb error message flashed up and process failed. Removed phone battery and reboot, all is well but SCREW KIES
Odin from now on
Probably the most creative thing I've seen here all night. Kudos to you my friend!
Sent from my SGH-T959V using XDA App
Downloaded the stock ODIN version of GB 2.3.6 KJ6 .tar here to flash via ODIN but phone will not connect via usb at all now. I think I reverted it's firmware back to the paleolithic era somehow. Could someone share the link the newest ODIN? I have v1.85 and I think also 4.03?
Unless anyone has any ideas, looks like CWM may be my only chance. How can I upgrade firmware if the method used to update is inoperable? Whenever I go into download mode it will not connect with USB. Instead windows says
"USB Device Not Recognized
One of the USB devices attached tho this compter has malfunctioned and windows does not recognize it. For help with this problem, click here."
Great bricked in a factory reset version of kb5 ugh. And this all happened because I tried to use stupid Kies!
Son of a ginger biscuit I figured out why it would not connect it was the 6 FOOT CORD I had hooked up for convenience it WILL NOT GO INTO ODIN OR KIES without the original 3' cord wow
Don't know if it was related to the Kies failure or not but now I am up and running though I cannot flash any .zip with cwm, says signature not verified, and I cannot find a toggle, I have 2.3.6 running now, rooted with super one click zerg, recovery 3e, is there a difference between "rom manager" and "cwm"?? How do I fix this I'd like to install the custom debloater .zip... upgraded from kb5
Farlander said:
Don't know if it was related to the Kies failure or not but now I am up and running though I cannot flash any .zip with cwm, says signature not verified, and I cannot find a toggle, I have 2.3.6 running now, rooted with super one click zerg, recovery 3e, is there a difference between "rom manager" and "cwm"?? How do I fix this I'd like to install the custom debloater .zip... upgraded from kb5
Click to expand...
Click to collapse
Definitely stay away from ROM Manager, from what I've read. You're getting that signature verification error probably because the phone now has standard recovery vs. CWM. That's an assumption on my part, though. You would have to ODIN one of Drhonk's modded kernels that comes with voodoo/cwm/root to get CWM installed. Within the standard recovery there is not a place to toggle the signature verification.
Considering you're on KJ6 now, go to http://forum.xda-developers.com/showthread.php?t=1194032 and grab drhonk's KJ1 kernel. Put it into the PDA section of ODIN and flash it. Then you'll have CWM.
Farlander said:
is there a difference between "rom manager" and "cwm"??
Click to expand...
Click to collapse
I had the same issue when I first started. ROM Manager is an app used to download & install custom ROMs, make backups, etc., but it does not work correctly on our phones. "CWM" (as used in the context of the SGS4G) is the custom recovery menu we install to do basically the same things. Anyway, follow stephen_w's instructions to install a custom kernel and that will solve your issues.
Awesome response stephen_w. A link! So much info out there I'm compiling a small database but when I need something it's usually back to search!
I was up and running KJ6, trying to install .zip files from root of sd card using cwm. Did not work - error was E:\ signature verification failed
So, decide to ODIN back to KB5, and try to load cwm, upgrade via cwm, and see if there was a glitch there. Did not work. Upon ODINING back to KB5, download screen has different look, and phone bootloops at Galaxy S logo. I'm about to ODIN flash 2.3.6 again and hope that it works....
This all started because Kies failed (presumably due to length of cord) the KJ6 from Raver that I ODIN'd in I THOUGHT was all stock actually came with CWM and super user preloaded. CWM did not recognize su.apk in the root and was therefore less functional. I fixed permissions and the error went away, but many icons were still greyed out. I wanted to bring back my apps/data from rom manager backup, but my recovery would not work. It would not open the .zip files, and there was no toggle to enable/disable signature verify. This may have been because I did not buy the pay version of CWM, or I don't know how to use it properly. Do you have to somehow flash the recovery to enable CWM? Is there a particular recovery designed for KJ6 SGS4G??
Also, what is the "bootloader update" option for in ODIN?
Farlander said:
Awesome response stephen_w. A link! So much info out there I'm compiling a small database but when I need something it's usually back to search!
I was up and running KJ6, trying to install .zip files from root of sd card using cwm. Did not work - error was E:\ signature verification failed
So, decide to ODIN back to KB5, and try to load cwm, upgrade via cwm, and see if there was a glitch there. Did not work. Upon ODINING back to KB5, download screen has different look, and phone bootloops at Galaxy S logo. I'm about to ODIN flash 2.3.6 again and hope that it works....
Click to expand...
Click to collapse
Weird; I've not had the signature verification error with CWM, only with the standard recovery.
When you went back to KB5 you went from a Gingerbread (GB) ROM to a Froyo ROM. Froyo & GB require different boot loaders so if the ROM you flashed did not have both boot loaders, then you get stuck in a boot loop. Going back to KJ6 will probably get you going again.
This all started because Kies failed (presumably due to length of cord) the KJ6 from Raver that I ODIN'd in I THOUGHT was all stock actually came with CWM and super user preloaded. CWM did not recognize su.apk in the root and was therefore less functional. I fixed permissions and the error went away, but many icons were still greyed out.
Click to expand...
Click to collapse
I thought Raver's ODIN version of KJ6 was pure stock. I didn't think it had CWM or Superuser.
I wanted to bring back my apps/data from rom manager backup, but my recovery would not work.
Click to expand...
Click to collapse
You might have problems recovering to GB ROMs. This is due to an error in CWM for GB. The problem prevents the /system partition from unmounting. From what I've been told, you have to flash back to a Froyo ROM, like Bali, to do the recovery then flash back to the GB ROM afterward. Not sure if that's your problem here, though, as I've never used ROM Manager.
It would not open the .zip files, and there was no toggle to enable/disable signature verify. This may have been because I did not buy the pay version of CWM, or I don't know how to use it properly. Do you have to somehow flash the recovery to enable CWM? Is there a particular recovery designed for KJ6 SGS4G??
Click to expand...
Click to collapse
I've never paid for a version of CWM. I've always used one of drhonk's modded kernels to get CWM. Installing the KJ1 kernel I mentioned earlier should do that for you.
Also, what is the "bootloader update" option for in ODIN?
Click to expand...
Click to collapse
My best ODIN advice: Let ODIN decide what needs to be checked and what should not. I've not used the "Phone Bootloader Update" feature. Don't go anywhere near the "Phone EFS Clear", either. I've a feeling that would wipe out your IMEI and other things.
See if you can get Raver's ODIN Stock KJ6 to install, then install drhonk's KJ1 kernel. Once done, reboot into recovery mode and see if it is CWM Red recovery, which is should be. Note the version number at the top and report it back here.
If all of that works well and the right version of CWM is there, then maybe we need to examine what ZIP you're trying to flash. Maybe it's a corrupt file.
Thank you very much, succesfully flashed GB 2.3.6 KJ6, succesfully flashed Drhonks KJ1, had a hard time entering recovery boot mode
RECOVERY BOOT MODE 3 BUTTON SGS4G 959V
HOLD: vol up, vol dn, power
RELEASE: power
RELEASE: vol up, vol dn
Disabled voodoo and I'm about to load up busy box, (CWM i.e. rom manager???) per the instructions......
UPDATE 20:02 ownloaded "rom manager", re-enabled VOODOO, rebooting. I think I get what's going on here. The file system is being reformatted / partitioned every time voodoo is enabled/disabled. I'm assuming the enabled mode is ext4 partitioning. However, cwm must be installed during fat32 mode, thus the reasoning for enable/disable voodoo. Can't wait to try this out, is it really faster than stock KJ6?? Love the look and feel of the rom already!
Farlander said:
Thank you very much, succesfully flashed GB 2.3.6 KJ6, succesfully flashed Drhonks KJ1, had a hard time entering recovery boot mode
RECOVERY BOOT MODE 3 BUTTON SGS4G 959V
HOLD: vol up, vol dn, power
RELEASE: power
RELEASE: vol up, vol dn
Disabled voodoo and I'm about to load up busy box, (CWM i.e. rom manager???) per the instructions......
Click to expand...
Click to collapse
Yeah, since being on GB I've been unable to get into recovery unless I use an app like Quick Boot or using ADB from the Android SDK.
Rom Manager and CWM, to my knowledge, are different animals. Good luck getting it going; it sounds like your 95% of the way there.
Heck yea workin good now to restore those apps I lost and debloat and play with boot animations!!!
UPDATE: Just also flashed via CWM .zip the debloater file, SWEET
Bloatware remover flashed with cwm works awesome, just browse to find the .zip doesn't even need to be in root dir
So far no noticeable deficiencies and without even installing app killer I have 165 used and 343 megs of ram free!!
I'm about to try to backup progs using rom manager, but when I click "backup/restore" it tells me I have to flash clockwork mod, which I'm pretty sure is already flashed??
Farlander said:
Heck yea workin good now to restore those apps I lost and debloat and play with boot animations!!!
Click to expand...
Click to collapse
Awesome, glad you got it working
MY PHONE IS NOW ALL THAT IS PERFECT
Thank you EVERYBODY
This took me about 2 weeks of 3-4 hours a day research and thumb work
now operating
2.3.6 KJ6 GB w/
KJ1 drhonk stock + voodoo + cwm
debloater.zip
Titanium Backup to restore all apps (adfree, app killer, etc. etc.)
Icons and background are gone but no bigggy
mine got unplugged in odin download screen can anyone help?
Andrew.80 said:
mine got unplugged in odin download screen can anyone help?
Click to expand...
Click to collapse
That blows. Does ODIN recognize it when you plug it back in? If so, just reflash.
Sent from my SGH-T959V using XDA App
When in doubt take the battery out! (to dinner)
UPDATE: I want to make a total phone backup (of all my current settings) using rom manager. When I go to "backup current ROM" it says cwm needs to be installed and gives me options for several phones, including the i9000. Should I do this even though cwm red is already installed on my phone? Need a workaround here...
thanks in advance
Farlander said:
When in doubt take the battery out! (to dinner)
UPDATE: I want to make a total phone backup (of all my current settings) using rom manager. When I go to "backup current ROM" it says cwm needs to be installed and gives me options for several phones, including the i9000. Should I do this even though cwm red is already installed on my phone? Need a workaround here...
thanks in advance
Click to expand...
Click to collapse
ROM manager doesn't work on the SGS4G. Your best bet right now is titanium backup, or flashing the bali kernel for 2.2 if you want to make a full backup using cwm recovery.
stephen_w said:
Definitely stay away from ROM Manager
Click to expand...
Click to collapse
ultimakillz said:
ROM Manager is an app used to download & install custom ROMs, make backups, etc., but it does not work correctly on our phones.
Click to expand...
Click to collapse
FBis251 said:
ROM manager doesn't work on the SGS4G.
Click to expand...
Click to collapse
Man, this should really be posted somewhere.
stephen_w said:
That blows. Does ODIN recognize it when you plug it back in? If so, just reflash.
That fixed it
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Sent from my SGH-T959V using xda premium
Ok so yesterday I received a cappy from someone on here that I told them I would try and fix. I am not charging them anything and am actually paying shipping back to them. When I received it and turned it on it was stuck at the end of the cornkernel bootlogo. I thought hey this will be easy and flashed the heimdall version of I897UCKK4 Stock, Wipe, with options to install Bootloaders, Param,and Re-partition-One-Click. Phone rebooted and is now stuck at the att logo. So I flash cornkernel, its stuck at the end of cornkernel bootup. So I decided on a whim to try and flash this kernel Devil3_1.1.3_HB_cappy_CFS_BLN_VC_20120807, luckily that got me into recovery, so I did a full backup of all the stuff on his internal storage and completely wiped the phone, wipe data/factory reset, wipe dalvik cache, format boot, format system, format sdcard, format cache, format data, format datadata (yes I know I wiped some things twice) . Then I flashed my rom, it just reboots to recovery after the flash, still reboots after a reflash of the rom. I then wiped everything again and tried flashing CM9's latest nightly to see if I could get it to boot up. Still reboots to recovery. So far all together I have flashed I897UCJI6-OCD-REV02-Low-designgears, i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe, I897UCKF1_withBL,SGH-I897_I897UCKJ3, KK4-SE-One-Click, JF6 With Bootloaders, SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click Followed By I897UCKK4 Stock, Wipe, with options to install Bootloaders, Param,and Re-partition-One-Click both are heimdall. All of those either left it stuck at att or kernel screen after I flashed a kernel. Anyone got any ideas? I am almost to my wits end.
Try the Odin version of this... Stock KK4 one click...it will do ya a full wipe and repartition for sure.
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
Try the Odin version of this... Stock KK4 one click...it will do ya a full wipe and repartition for sure.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Already have that is my go to file actually and I tried that before going the heimdall route. Thanks Anyways.
You should try the Rogers stock gingerbread with boot loaders. Worked for me when I was using the AT&T and not getting past recovery...
Sent from my cm_tenderloin using xda premium
-SGA- said:
You should try the Rogers stock gingerbread with boot loaders. Worked for me when I was using the AT&T and not getting past recovery...
Sent from my cm_tenderloin using xda premium
Click to expand...
Click to collapse
Thanks for the idea. It didn't work tho. I am still at the same spot, phone keeps rebooting to recovery.
have to wonder,,has the phone had the EU bug? might try flashing the rom with datadata ( I believe thats it) on the external sd
stayintwisted said:
have to wonder,,has the phone had the EU bug? might try flashing the rom with datadata ( I believe thats it) on the external sd
Click to expand...
Click to collapse
Not that I know of, It isn't my phone so I do not know the history other than him saying it didn't boot past the kernel screen and receiving it and seeing that and then what I have done. Normally the sd card data from what I have seen is wiped when the eu bug happens from what I have read, maybe I am wrong, but since I backed up his data off the sdcard that is why I do not believe it has had the eu bug.
Anyone have any more ideas, I tried the EU Bug Instructions @ http://forum.xda-developers.com/showthread.php?t=1447303&page=85 Replacing the vold.fstab in the rom and also flashing it with CWM without luck. I am still stuck with it rebooting to recovery. I am still waiting on him to tell me his address again so I can mail it back to him since at this point I am lost. I told him MobileTechVideos would more than likely be his best shot at getting it fixed though.
cbalt said:
Anyone have any more ideas, I tried the EU Bug Instructions @ http://forum.xda-developers.com/showthread.php?t=1447303&page=85 Replacing the vold.fstab in the rom and also flashing it with CWM without luck. I am still stuck with it rebooting to recovery. I am still waiting on him to tell me his address again so I can mail it back to him since at this point I am lost. I told him MobileTechVideos would more than likely be his best shot at getting it fixed though.
Click to expand...
Click to collapse
Long story short, recovery is iffy at best for me. I went through something similar to this when trying to go from CM10 back to CM9 for the first time. Ever since then recovery has not been right.
What I did was
Install a stock one-click with bootloaders, used odin to flash speedmod kernel and then used that recovery to flash CM9 in three successions wiping everything each time. Somehow it took, and now I am no longer a crack flasher because I have the same kernel splash screen problem every time.
So,
Use this http://www.mediafire.com/?5rcofbzusoor6mv
PDA button in Odin3 1.7: http://forum.xda-developers.com/attachment.php?attachmentid=566807&d=1302623831
Boot into recovery.
Flash your ROM
Wipe /system, /data, and dalvik.
reboot recovery.
Flash again.
Wipe /system, /data, and dalvik.
reboot recovery.
Flash again.
Try to boot normally.
Thanks for the idea, but it's a no go, Phone just stops at Galaxy S SGH-I897 Kernel Screen. I can't even get to recovery. Only way I have got to recovery with this phone was flashing an ICS kernel.
There is a place that has rogers stock roms
cbalt said:
Thanks for the idea, but it's a no go, Phone just stops at Galaxy S SGH-I897 Kernel Screen. I can't even get to recovery. Only way I have got to recovery with this phone was flashing an ICS kernel.
Click to expand...
Click to collapse
There is a place that has rogers stock Roms the one click Odin's back to 2.2 is my go to for all problems the i can't get to recovery. I know you said you tried rogers stock roms but try the one-clicks for some reason they have always saved me. It will re-install everything and you will be on stock recovery if it works but from there its easy to get CWM and your on your way
sunfirestorm said:
There is a place that has rogers stock Roms the one click Odin's back to 2.2 is my go to for all problems the i can't get to recovery. I know you said you tried rogers stock roms but try the one-clicks for some reason they have always saved me. It will re-install everything and you will be on stock recovery if it works but from there its easy to get CWM and your on your way
Click to expand...
Click to collapse
I have already tried all three of the Rogers One Clicks with none of them actually doing anything more than the Captivate One Clicks, It still doesn't boot past the first screen. Thanks for the input though.
You've been using a one click with 2.3.3 bootloaders, they're are 2.3.5 bootloaders available that have solved certain peoples sleepdeath issues, including mine. I've done this procedure on several captivates to take them from mangled and non-bootable to latest bootloaders and working recovery to flash whatever rom I need to from there on.
Use this one click that includes the 2.3.5 bootloaders - http://fohdeesha.com/data/other/android/i897uckk4 with latest BL.zip
After that goes through and you have stock gingerbead, use this odin package to flash the included devil kernel package, that will give you the latest CWM recovery
http://fohdeesha.com/data/other/android/uckk4 CWM recovery.zip
After that, if you still can't boot into recovery, you have a hardware issue
edit: looks like you already did this more or less.......try it once more in this order? Then once you do this and boot into recovery, flash a rom and see if it will work
fohdeesha said:
You've been using a one click with 2.3.3 bootloaders, they're are 2.3.5 bootloaders available that have solved certain peoples sleepdeath issues, including mine. I've done this procedure on several captivates to take them from mangled and non-bootable to latest bootloaders and working recovery to flash whatever rom I need to from there on.
Use this one click that includes the 2.3.5 bootloaders - http://fohdeesha.com/data/other/android/i897uckk4 with latest BL.zip
After that goes through and you have stock gingerbead, use this odin package to flash the included devil kernel package, that will give you the latest CWM recovery
http://fohdeesha.com/data/other/android/uckk4 CWM recovery.zip
After that, if you still can't boot into recovery, you have a hardware issue
edit: looks like you already did this more or less.......try it once more in this order? Then once you do this and boot into recovery, flash a rom and see if it will work
Click to expand...
Click to collapse
I'm going to do your steps again which is more or less what I have already done. I am waiting to hear back from the person so I can ship him the phone back and he can send it to MTV or someone or just junk it, its his phone and his choice. At this point I would say it needs Jtag or Unbrickable mod + repair. Although I am still trying ideas of mine and anyone elses lol.
EDIT: Still A No Go. Doesn't Boot Past ATT Screen After Flashing The Odin 1 Click, After Flashing Kernel then wiping and flashing rom, it just reboots to recovery
Well if the one clicks are successfully writing primary and secondary bootloaders and it's still not working, a jtag isn't going to do anything else. It almost sounds like the memory has a few corrupt blocks, but I can't say until you flash 2.3.5 BL's and see what happens
---------- Post added at 07:39 PM ---------- Previous post was at 07:37 PM ----------
cbalt said:
EDIT: Still A No Go. Doesn't Boot Past ATT Screen After Flashing The Odin 1 Click, After Flashing Kernel then wiping and flashing rom, it just reboots to recovery
Click to expand...
Click to collapse
Oh jeez looks like the memory is failing then
guys this is 4th day :angel:and i m trying to fix sgs4g t959v.......i downloaded a lot of roms but no one will go beyond boot screen except froyo kd1.....but in froyo after successfull boot it freezes very quickly and reboots...........i m very annoyed now and want someone to share his expertise......thank you in advance:good:
yes it always go into download mode easily and sometimes into recovery but freezes very soon...............
Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...
already tried that
itzik2sh said:
Hi
1. Please update your thread topic, no one will help an empty topicless [Q].
2. Go here and follow instructions. This will bring you to Gingerbread (with GB bootloaders) and from there it will be very easy to upgrade.
3. Once you have a rooted GB ROM with CWM recovery 3 and above, you will be able to flash an MTD ICS ROM such as CM9/MIUI/Ultragen and then JB...
Click to expand...
Click to collapse
bro i already tried that......upgraded with kies mini and kies said upgrade is successful but it did not go beyond boot screen
If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.
itzik2sh said:
If you used kies mini you did not try that at all.
uninstall all Samsung drivers and actually try that.
Click to expand...
Click to collapse
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot
I think if you have the kies drivers installed you should try using gremlin remover.
dervash said:
the link you provided said first upgrade from stock froyo to stoc gb, then onwards....i did so......everything went fine but didnt boot
Click to expand...
Click to collapse
No. You need to read better. The link I sent allows you to upgrade to GB without kies and then further on. Now what you can do is uninstall kies and any other Samsung driver from PC, switch USB port and use heimdall to flash to rooted GB. From there zip flash ICS and then JB...
If you say you don't have boot you probably don't have bootloaders. Please follow instructions and read them well.
sent from me
Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
champ1919 said:
Did you do the factory reset between?
Sent from my SAMSUNG-SGH-I547 using xda app-developers app
Click to expand...
Click to collapse
nothing comes beyond boot screen.......how can i do a factory reset.....the one stock rom kd1 i m able to boot but it freezez after seconds.......let me try
i managed to do a factory reset but to no avail
You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.
DickyG said:
You might be getting confused. Please go back to the link provided by itzik2sh and study the guide on using Heimdall. It's fairly lengthy but completely accurate. It will show you how to use Heimdall to get to stock GB, how to use Heimdall to root your phone by flashing AntonX's kernel, how to flash the necessary bootloaders, and even how to get your device into download mode. It's pretty much foolproof...and it works...please do your homework...we will be grading you.
Click to expand...
Click to collapse
bro i did all heimdall one clicks...stock kj6, stock+root, stock kf1..,,but nothing happened........the only thing worked is i downloaded this starter pack http://forum.xda-developers.com/showthread.php?t=1223765 and installed both but nothing happened...then again i flashed first which is kc1 with pit file then i flashed stock froyo rom downloaded from sammobile.....it boots up but suddenly freezes after 20 or so seconds......i erased to factory but the result was same.......then i flashed bali 3.03 kernel and booted to cwm recovery and tried to flash icbinb.....as required i flashed ext4 converter then immediately as i try to flash icbinb....recovery freezes randomly.....and i m unable to complete process.......may be it has some hardware issue
One final thought...looks like you've tried kies, Odin, & Heimdall. There is the possibility that you might have some conflicting drivers wandering around your computer. Why don't you try another computer (if one's available). Run Heimdall...be sure to follow the instructions on verifying your Java version and Microsoft Visual C. If you are successful, be sure and flash the bootloaders and then the basic-with-a-twist kernel.
Hope this works...I'm out of ideas.
i did so.....but no difference......i think it has some hardware problem.....because even if i m in recovery....it freezes after some tine....be it stock recovery or cwm......also i mentioned earlier that only rom which i was able to boot was stock froyo.....but it also freezes after a couple of minutes. and if i dont turn off during it is frozen it becomes very hot and gives over heat signal at next restart..................so assuming it had a hardware problem i returned back the device