Related
this is a kernel that i compiled direct from toast's HTC-Supersonic-2.6.29 source. toast and netarchy all put in their fixes and enhancements so i take no credit but altering the kernel that netarchy posted in this http://forum.xda-developers.com/showthread.php?t=719763 thread.
this is based off his 3.7.1 kernel that enables around 55-57 fps on both epson and novatek screens. Like he said, it disables the HDMI so if you need that, don't use this. in fact, this kernel will have all the issues that netarchy's 3.6.2 might have, but the touchscreen does work and you should still get ~55 fps average on fps2d.
this means that the kernel also comes with overclock and undervolt, compcache modules, audio boost and everything.
the kernel that's included is only compatible with ClockworkMod recoveries, sorry for those who use Amon_RA! i can't seem to make a working boot.img, and koush's way of updating kernels also is a lot easier to use
i highly highly doubt this has the possibility to break your phone but if it somehow does, i don't take responsibility.
once again, all credit goes to netarchy, toast, and all other people who i may have missed.
if you're using this kernel and get around 40 or so frames per second, here's probably the best thing to do. go to setCPU into the Advanced tab, and set the Up threshold to a value between 65-75. I chose 65 and i consistently get 55-57 average with stdev of 4 or 5.
edit: i just compiled a new kernel straight from Netarchy's sources, as he says that he updates his to the latest at all times. so, the new version is 3.6.4, because that's what his is. remember, this is exactly the same as his kernel, except that i just modified something to make it work for Froyo ROMs.
enjoy!!
edit: wifi does work, i think it's just that for some people who are flashing it over a ROM it might not work. I re-flashed evolution v9 and wi-fi worked again
using amon ra 1.7.0.1 i got
E: Missing file:
system/lib/modules/bcm4329.ko
E: verification failed
Installation aborted
this DOES NOT work.... but thanks for playing
scooter185 said:
using amon ra 1.7.0.1 i got
E: Missing file:
system/lib/modules/bcm4329.ko
E: verification failed
Installation aborted
Click to expand...
Click to collapse
yeah i doubt it works on amon ra, cause it's something made for clockworkmod. could you flash clockworkmod and then try this kernel, and tell me if it works?
btw, the bcm4329 appears because i found a kernel that i could use so i just replaced the zImage inside it. the original one was supposed to put the bcm4329 in /system/lib but i took it out cause it wasn't necessary.
will this work on the froyo sense rom?
infamousjax said:
this DOES NOT work.... but thanks for playing
Click to expand...
Click to collapse
could you please explain a bit more what's not working?
http://www.failhorn.com/
Wow... brutal guys.
look, guys.
i'm not trying to trick you guys. why don't you guys tell me what's wrong instead of telling me "fail" and giving me some stupid crap like failhorn.com
it works 100% fine on my phone, running EVOlaunchv9 froyo. so why don't you tell me what's not working and NOT be douches about it?
Douches.
Thanks for making this, man. I've been waiting for this kernel to support Froyo. Works great so far. Only thing is Wifi Tether isn't working, despite trying to reflash the fix from ffolkes thread. Might have something to do with clockwork recovery, though.
warmthsound said:
Douches.
Thanks for making this, man. I've been waiting for this kernel to support Froyo. Works great so far. Only thing is Wifi Tether isn't working, despite trying to reflash the fix from ffolkes thread. Might have something to do with clockwork recovery, though.
Click to expand...
Click to collapse
thanks. yeah i just noticed that wifi in general isn't working... and i can't figure it out. there might be something else i missed... but i'll keep looking.
thanks I'll load this up later when I flash my froyo build again.
justinisyoung said:
thanks. yeah i just noticed that wifi in general isn't working... and i can't figure it out. there might be something else i missed... but i'll keep looking.
Click to expand...
Click to collapse
Can you not use that patch that is in the Nova FPS kernel thread for the 802.11 N and 4G. Just a thought, when I flashed to the kernel in that thread I lost my wireless too and then i flashed that patch and it started working again. I am new to this game, sounds logical to me lol.
Worked great on my phone, running Damage Control's newest. The only thing is that I had 5 points of touch with the kernel just for the novatek screen and 44fps. With this kernel I only had 3 points of touch and only 41fps. Still good work, dont let those other guys get you down. Thanks
Noticed this is based off 3.6.2
Maybe the wifi problem will go away if 3.6.3 is used instead. Looks like the audio boost patch was removed as it was causing problems with bluetooth, and no fluffy pink bunnies were harmed in the making of 3.6.3 so its peta approved
I had 5 touch points using Dotty on ffolkes kernel.. Only got two with this one.
Sent using the power of swype.
good god there are some real ******** on this board as of late !
op thx for the work when i flash a 2.2 ill give it a shot
Way to show this Guy support you tools!!!!!!!!
tried it running evolution v9. everything worked great except for wifi which was already stated. appreciate the work you've done. thx
when i get home from work i'll see if i can build the kernel again. it might be 3.6.3-based if netarchy and toast updated the kernel source on github, but otherwise we'll be stuck with this one till they do so.
sorry about the wifi guys, i spent a few hours and i could not get it to work. but if you flash the wifi/4g fix on ffolkes's kernel's page (the link is on the first post), you'll get wifi tether working at least
AOSP 2.3 has been released and this thread is now useless
If you wanna follow our work with aosp 2.3.1 for dream/sapphire :
Source Code Repo for Gingerbread (Dream and Sapphire builds)
Compiled builds
MODs bootanimation, superuser, terminal emulator, live wall papers support, google apps, market 2.2.7, etc...
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Since people were asking for it, here is a quick port for the G1
Thanks and credits goes to :
-pershoot using his kernel boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120810
-seo using mostly his port for magic as base
I'm currently using the 14MB ram hack with radio 2.22.28.25 & hboot 1.33.0013d with CM6.1
If you are not you need to follow these steps first : 2708+ enabled kernel [14MB ram with radio 2.22.27.08/2.22.28.25 & hboot 1.33.0013d]
OR
you can always try to flash a non 2708 kernel from pershoot like boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120810 after flashing this ROM but I have'nt tested it myself.
working : data/radio but like all other ports no mic
not working : mostly everything
seo has wifi working on magic, I'm looking into his wpa_supplicant.exec script but changing wlan.ko and driver did'nt worked.
For wiping I suggest using Ohsaka SuperWipe as the update script does'nt wipe /data partition.
Download link : here
Nice, I'll flash it shortly
Nice!!
3G connection(Magic 32B) is working!
can some one post some pics please
Unassigned file limit of 10 downloads reached.
Click to expand...
Click to collapse
would flash it, but i need a mirror
flashed it but no notifications bar? lol
bypass23 thanks your hard work
flashed already,It runs slowly...
no wifi
no BT
can not set time&date
but i believe 2.3 will come to G1 and work great
flashed, works, but sloooow, as expected
well, restoring previous rom
reiga said:
would flash it, but i need a mirror
Click to expand...
Click to collapse
updated download link sorry
komeup said:
can some one post some pics please
Click to expand...
Click to collapse
I added some, nothing special but enjoy
I've got a problem,
I nand backuped my phone, wiped, flashed 2.3, wiped, and nand restored my previous backup, and now my HOME and CALL button is not working, when I press them, no response
do you have any ideas what could it cause? how to fix this?
ra100x said:
I've got a problem,
I nand backuped my phone, wiped, flashed 2.3, wiped, and nand restored my previous backup, and now my HOME and CALL button is not working, when I press them, no response
do you have any ideas what could it cause? how to fix this?
Click to expand...
Click to collapse
I just did a SuperWipe + nand restore to CM6.1 and both HOME and CALL buttons are working properly.
I just added a link for Ohsaka's SuperWipe in the OP, use it to wipe before doing your restore. (needs to be flashed)
bypass23 said:
I just did a SuperWipe + nand restore to CM6.1 and both HOME and CALL buttons are working properly.
I just added a link for Ohsaka's SuperWipe in the OP, use it to wipe before doing your restore. (needs to be flashed)
Click to expand...
Click to collapse
thanks, but I wiped it with Ohsaka SuperWipe, before and after 2.3, I don't understand, I'll try it again, but I'll try to fix_permissions first, don't think it could have something with my issue, but it's worth trying
and one more thing, my PC now doesn't recognize my phone as USB device, will try something and post results
ra100x said:
thanks, but I wiped it with Ohsaka SuperWipe, before and after 2.3, I don't understand, I'll try it again, but I'll try to fix_permissions first, don't think it could have something with my issue, but it's worth trying
and one more thing, my PC now doesn't recognize my phone as USB device, will try something and post results
Click to expand...
Click to collapse
Flash a stock ROM? It's probably a good idea to make a new thread for your issue tbh, since it's not really that relevant to the ROM.
AdrianK said:
Flash a stock ROM? It's probably a good idea to make a new thread for your issue tbh, since it's not really that relevant to the ROM.
Click to expand...
Click to collapse
problem solved, flashed Biffmod 2.1, then nand restore, buttons work fine
can someone delete my lame problem?
You just some-what single-handedly saved the G1 from dying out. Mine was stolen a while ago, but I still check back on this Thread and I'm so happy you took the time to Port the ROM. Great job my friend.
Maybe these GApps will help: http://bit.ly/fyOUMI
Got it from: http://forum.xda-developers.com/showthread.php?t=864403
Wow, thunderspeed!Nice Work!
But wondering when would Milestone XT702 got one
Lol lucky y'all... Got ginger bread before us G2 folks
Sent from my HTC Vision using XDA App
I flashed it ,it's slowly....and can not change time setting`` it is not perfect````and now just need to wait for the new 2.3 rom for G1 and wish it more better....
Original Android <3ers! said:
You just some-what single-handedly saved the G1 from dying out. Mine was stolen a while ago, but I still check back on this Thread and I'm so happy you took the time to Port the ROM. Great job my friend.
Click to expand...
Click to collapse
It sounds more like it's on life support, and a lot of people (mainly developers) wanna pull the plug. To them, the G1 phones are nothing but a waste of time, when compared to a lot of the newer phones on the market.
The reality though, it isn't much different then a lot of new phones on the market. I gotta have a hardware keyboard, and that limits me to the myTouch 3G Slide, and the G2. Frankly, the Slide is essentially the same thing as my G1, with lots more memory, and a better camera. My friend replaced his G1 with the Cliq, and he thought it was an upgrade, but didn't understand why Angry Birds was still slow?
So long as there's App2SD applications, over priced phones, and smart coders, the G1 lives on.
Just flashed imoseyon's kernel on my rooted thunderbolt and now I'm stuck in a bootloop...any advice? I've running stock rom.
It's the lean version of his kernel and thats the only thing I flashed. I cleared cache + davik cache before flashing.
I was able to do a restore, but I want to use this kernel
It sounds stupid, but try again. Clear cache and dalvik
I've tried 5 times Even tried uninstalling setcpu and unfreezing all the bloatapps that I had frozen. Still get stuck on boot
I've also tried re-downloading the kernal file in case it was corrupt...no luck still.
Which Imoseyon kernel are you running?
Could it be that your particular Tbolt won't handle the lower voltage? Also you might want to check the md5sum again.
Good luck.
brenick said:
Which Imoseyon kernel are you running?
Could it be that your particular Tbolt won't handle the lower voltage? Also you might want to check the md5sum again.
Good luck.
Click to expand...
Click to collapse
I said its the lean version, and he doesnt post md5sum so I have nothing to compare to. But thanks for using my thread to +1 your post count....
wifi is broke and my data is stuck on 1X only now after doing advanced restore-->reboot only.
Did you flash the GB Sense kernel instead of the Froyo kernel?
I used this 1... http://forum.xda-developers.com/showthread.php?t=1021404 It says Froyo... where can I find the stock kernel that you get after rooting? I need to get wifi/data working again now.
I mount the phone as disk drive on my computer, and I can only view the SD Card...ugh whats going on, so many issues after flashing this kernel
I did a factory reset now and I still cant connect to wifi/3g/4g...I think I need to flash the stock kernel to fix it. Can someone point me in the right direction please?
Flash another rom such as BAMF, whenever you flash a rom it flashes the kernel that is included in the rom as well.
I'm using his kernel just fine. Can you check your radio version?
Sent from my ADR6400L using XDA App
radio 1.16.00.0402, and Im on the stock ROM, dont want to use a special ROM...
Flash a rom or the stock rom that should get you on another kernel. Also, my TB couldn't handle some of the kernels. I was never able to get it at 1.92ghz. I can only use the normal version. Try one of the other versions. Best of luck!
Sent from my DROID PRO using Tapatalk
make sure the kernel is not oc'd to 1.92.................most phones can not handle that.
Some of the user's here, myself included, have been having issues installing any ROMs/ kernels built by Faux. What I'm trying to do is pinpoint the exact cause of this and hopefully rectify the issue.
I'm currently downloading all available ROMs and will install each to determine which are flashable and which are not.
Flashing Procedures
0. Boot into CMW Recovery: External with EXT 4 support using volume down + power method
1. Wipe Data
2. Wipe Cache
3. Wipe Dalvik
4. Format /System
5. Flash ROM
6. Select Power Down from CMW Menu
7. Power on phone without wall charger plugged in
ROM List:
Bionix- Confirmed as working
EagleBlood GB- Confirmed as working
EagleBlood FR- Confirmed as working
Ultimate- Confirmed as working
Light&Sinister- Confirmed as working
Dark&Sinister- Confirmed as working
Faux AOSP-NOW WORKING!!
CM7- Confirmed as working
LG Stock- Confirmed as working
Observations:
Bionix converts /system and /data to ext3. I figured that if the issue we were having with Faux was due to format errors then I could just flash Faux over Bionix and it would boot. In testing, it seems like Faux gets further when flashed this way but still refuses to boot. Before I would only get the initial LG screen and then it would black out. Now I can get to the second LG screen with blue background but it hangs there. Will run logcat to see what is causing the freeze once I get logcat running again.
My current theory is that there is a difference in the boot.img that Faux has built for his ROM that will not boot correctly. I have the same issue with his kernels as well. They boot to the first LG splash screen and then the screen shuts off. Still struggling with my logcat issue so I'm at a standstill until that is fixed.
Development:
I was finally able to get pure AOSP to boot by flashing Faux's AOSP and then flashing Morfic's CM7 kernel. I personally believe this definitely proves that there is something in Faux's boot.img that doesn't function properly on all devices.
At Faux's suggestion, I flashed his Stock Voltage kernels in order to see if I could get the phone to boot.
Kernel:
[ Start @ 1.0 GHz, Stock Voltage, Max @ 1.2 GHz ]
(Official LGE/Tegra Voltage Values, Same as STOCK LGE Kernel)
CM7 Kernel Version 0.1.9- Boots to second LG splash screen then freezes.
CM7 Kernel Version 0.1.9 With EXT4-Booted fine but still displayed Morfic boot animation for some reason. Kernel version shows as Faux's in about phone, though.
I want to flash my first ROM, any suggestions on which one is the most stable and better with battery life than the Stock ROM?
Mikeglongo said:
I want to flash my first ROM, any suggestions on which one is the most stable and better with battery life than the Stock ROM?
Click to expand...
Click to collapse
I didn't test any of the ROMs for quality but I would personally stick with a Froyo based ROM for now. Gingerbread is simply too buggy and missing a lot of features.
[B][U]SUCCESS!!![/U][/B]
I was finally able to get pure AOSP to boot by flashing Faux's AOSP and then flashing Trinity's CM7 kernel. I personally believe this definitely prooves that there is something in Faux's boot.img that doesn't function properly on all devices. That would explain why I am unable to flash any of his kernels, either.
Most likely scenario is that you have a "weaker" chip which cannot handle the default OC to 1.1 and Under volting. Because of your case and a few others like you with the "weaker" chips, I have decided from next version on to include LG STOCK VOLTAGE version of my kernel as default kernel for the ROM and it's up to the users to install the OC/UV version themselves afterwards.
My solution is while in CWM, after you flashed the ROM, before you reboot, FLASH my STOCK VOLTAGE (SV) version of the kernel, then reboot. You should have NO ISSUES with STOCK VOLTAGE kernels.
So far for MT4G and G2x, I have been lucky with my phones. Both phones I can Undervolt and overclock AT the SAME TIME with very aggressive settings and remain stable with multiple runs of stress tests and benchmarks.
faux123 said:
Most likely scenario is that you have a "weaker" chip which cannot handle the default OC to 1.1 and Under volting. Because of your case and a few others like you with the "weaker" chips, I have decided from next version on to include LG STOCK VOLTAGE version of my kernel as default kernel for the ROM and it's up to the users to install the OC/UV version themselves afterwards.
My solution is while in CWM, after you flashed the ROM, before you reboot, FLASH my STOCK VOLTAGE (SV) version of the kernel, then reboot. You should have NO ISSUES with STOCK VOLTAGE kernels.
So far for MT4G and G2x, I have been lucky with my phones. Both phones I can Undervolt and overclock AT the SAME TIME with very aggressive settings and remain stable with multiple runs of stress tests and benchmarks.
Click to expand...
Click to collapse
The only problem with that theory, Faux, is that Morfic's kernel undervolts as well. Flashing his kernel on top of your ROM is the current workaround that I've found.
hiko36 said:
The only problem with that theory, Faux, is that Morfic's kernel undervolts as well. Flashing his kernel on top of your ROM is the current workaround that I've found.
Click to expand...
Click to collapse
I don't know what Morphic is doing with his under volting, theres no source code to compare. My source is based on CM7 with my tweaks added and its available via github for inspection.
faux123 said:
I don't know what Morphic is doing with his under volting, theres no source code to compare. My source is based on CM7 with my tweaks added and its available via github for inspection.
Click to expand...
Click to collapse
Please don't view my opinions as doubting your ability. This has just been a frustrating journey for a lot of us because we want to use your kernels/ROMs. I couldn't find anywhere where this had been addressed so I decided to take it upon myself. At this time, the two options we have are flashing your stock voltage kernel or Morfic's. Now that it's booted and running, I can say that you've built a beautiful ROM and I hope you continue to support it. Amazing work.
hiko36 said:
Please don't view my opinions as doubting your ability. This has just been a frustrating journey for a lot of us because we want to use your kernels/ROMs. I couldn't find anywhere where this had been addressed so I decided to take it upon myself. At this time, the two options we have are flashing your stock voltage kernel or Morfic's. Now that it's booted and running, I can say that you've built a beautiful ROM and I hope you continue to support it. Amazing work.
Click to expand...
Click to collapse
I took NO offense of your investigation or posts. I am actually glad you did all these. You have provided me reason for using stock voltage kernel as default. I was contemplating about this change a while back, but since your post, I decided to do it so more people can try my ROM without having random reboots or issues due to UV/OC combination.
I am simply posting what I can and cannot do. I can do only what I can read and see.
faux123 said:
I took NO offense of your investigation or posts. I am actually glad you did all these. You have provided me reason for using stock voltage kernel as default. I was contemplating about this change a while back, but since your post, I decided to do it so more people can try my ROM without having random reboots or issues due to UV/OC combination.
I am simply posting what I can and cannot do. I can do only what I can read and see.
Click to expand...
Click to collapse
Glad I could help and especially glad I finally figured out a way to boot your ROM. I was feeling left out haha.
Doh! He said rectify lol
Sent from my Xoom using XDA Premium App
Just wanted to start off and say a BIG THANKS for LinuxBozo and his amazing infuse mod which lets us use the other samsung roms (JVQ restricted )
I have been experimenting ALOT with various roms and thought i would share some of which i have tested out so far, the only one which gave me some issues was Sensation 2.0 , seems like when you reboot, sometimes you get no netwrok, then reboot, and icons are missing, so its a question.
Obviously this isnt really an OFFICAL rom for the Infuse, but id like to know if anyone else has had nice experience or recommendations for use with this dude's rom.
Galaxy S I9000 ROMS
[ROM][07/07/2011] - Ryyu's EDB v1.3 [JVQ] -- New Improvements!
http://forum.xda-developers.com/showthread.php?t=1133395
[ROM] SpeedRom [JVQ][Fast & Stable] NEW NEW
http://forum.xda-developers.com/showthread.php?t=1189625
[ROM][19/7] GingerReal - V7.1.4 JVQ - Time to Downgrade - stability and speed
http://forum.xda-developers.com/showthread.php?t=1155623
[ROM] [22.07.2011] DarkyROM v10.2 ★ JVQ ★ What are you waiting for?
http://forum.xda-developers.com/showthread.php?t=814091
[ROM][02/08/2011] Tiramisu EVO 6.0/6.7 Summer Edition! JVP/JVQ BIG UPDATE OUT!
http://forum.xda-developers.com/showthread.php?t=1171476
Captivate Roms
[ROM][2.3.4][JVQ]Continuum v6.1 - v6.2 Beta Now Open!
http://forum.xda-developers.com/showthread.php?t=1136128
[ROM][2.3.4][JVQ][UPDATE: 7/31] DlevROM Version 4.2: Mods and Features Galore!
http://forum.xda-developers.com/showthread.php?t=1146176
{2.3.4 ROM} Mosaic VI {Team Phoenix}{7/30/2011}
http://forum.xda-developers.com/showthread.php?t=1061203
VIBRANT ROMS
[ROM] RevolutionRom JVQ Final Update 2 (2.3.4) 7.31.11 Definitely Fixed Bluetooth
http://forum.xda-developers.com/showthread.php?t=1192438
So this hack seems to be another way to get Gingerbread on your phone. Interesting.
I have been running Darky all day with no problems. Very fast and stable.
Sent from my GT-I9000 using XDA App
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Auto-Android said:
Does the darky rom support HSPA+?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Hellraiser uses the same Rogers RIL that Infused v2 does, so probably not. (RIL is one of the things that gets swapped out.)
It's often hard to tell for sure because many frameworks won't show HSPA+ even if the RIL/modem are operating in that mode. Hell, even our original Froyo ROMs were broken in that way - they displayed UMTS when in HSPA+ mode. (UMTS is plain vanilla 3G.)
GingerReal - V7.1.4 JVQ
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
BTW, the default behavior in Sensation is no extended power menu, but if you use the app "Theme Settings (included in the ROM) you can change this.
As to the other issues - that's a new one, I haven't seen it before.
prasadudwadia said:
Which ROM did you test for JVP , i might give it a whirl, i finally finished going through all those roms, The Vibrant rom wasnt very exciting, and seemed to lack the extended power menu drop down which has Reboot, recovery download mode and such, thats a big thing for me.
Darky was my favorite so far,I might try Sensation. If anyone wants to test out a couple JVP roms and try adding in the APN settings, lets see what comes up and post which rom you tested.
Thanks everyone for their input on this, im getting more interested now and i will be trying to use the Infusion Kernel with some of these roms and see if i get a performance boost.
Im not sure if its just me, but whenever i reboot ANY of those roms which are installed with Linux's software , it seems sometimes the icons on the app drawer l ike disappearing, then when i reboot, apps reappear, but the Network to ATT gets cut off, then i reboot again, and sometimes its normal..........Any ideas?
Click to expand...
Click to collapse
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Infiniti350GT said:
I ran Hawkish 4 http://forum.xda-developers.com/showthread.php?t=1032599
I chose it because I saw that the ROM included the background effect from the SGSII, which while I have the SGSII & this feature seems to throw my photos to the way over saturated side - its more appealing for home screen settings and every day use since everything just looked almost wet or gooey. But the setting didn't work I imagine a kernel conflict, but I'm sure this could be built into one of our ROMS later and I wouldn't mind helping out with putting it together.
Overall I thought this ROM was a little laggy for the phone, I'm sure there are others out there that could run MUCH better or smoother.
I find it funny that we get a stock phone and find it boring so we flash a brand new phone to something completely different within an hour and when the next phone comes out we want their stock stuff so we can see how it is on OUR phone...HAHAHA -addicted
Click to expand...
Click to collapse
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Entropy512 said:
I think those are controls for Voodoo Color which:
1) Is extremely difficult to implement on our device (significantly different screen)
2) Is not necessary on our device - our screen fixes most if not all of the problems VC was intended to fix.
Click to expand...
Click to collapse
Yes sir, I believe you are exactly right. I normally don't like over saturation, but on a HUGE screen it looked great with some gooey gingerbread green stuff around it. My photography looked horrible especially HDR shots, worth it though. The colors on the SGSII and this phone are pretty different tho. But a lot to do with the same resolution on a smaller screen. The screen on the Infuse is a big (no pun) factor that held me to it rather than the SGSII
bigfau said:
Been running GingerReal V7.1.4 JVQ with Infusion GB kernel and I must say it's snappy. I have not had a single problem with anything. And from what I read Quadrant scores don't mean much, but I got a 3500 OC at 1.6. without Stagefright. I did'nt know Stagefright was til I Googled it. But my phone is very fast and I am very happy. Thanks Linux
Click to expand...
Click to collapse
i as well got the same results, but did you have a problem with the modem. mine would work for about 3 min and then i would no longer have network connection.
i had to change the modem to get it work really smooth, but yes this set is pretty good.
Infiniti350GT said:
Just wanted to throw it out there I ran a JVP based ROM without issue for an hour or so. The only thing I had to do was add my APN settings back & all was well. Someone may need to test this a bit more but my experience went well.
Click to expand...
Click to collapse
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
tekgurl said:
Man! I'm so upset. I flashed this ROM twice, but it would not boot. Did you flash from stock? I don't know what I did wrong.
Click to expand...
Click to collapse
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
prasadudwadia said:
Okay heres me scenario, hope it helps understand.
1) started off with phone already rooted and such and previously had Infused V2.00 full., Downloaded a JVQ rom ( like Darky's ) , and then downloaded Linux Bozo's rom/mod ) Put both of the zips on the ROOT of the internal SD .
2) backup info and boot into Red recovery.( Shut off device, then hold Vol - and + while pressing power ), release power and continue holding both volume keys).
3) Perform the following
Wipe Data/Factory Reset, Wipe Cache partition, Wipe Dalvik Cache
Install zip from SD card and select the ROM you want to use
Do install from SD card again and this time select the Linux Bozo zip
4) Reboot and you will be in your rom after 10 minutes ( be patient, it takes time ). If you want better performance, install the Infuse GB Kernel. Get it here
http://forum.xda-developers.com/showthread.php?t=1212485
5) Enjoy the rom
Click to expand...
Click to collapse
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
tekgurl said:
I've successfully flashed a JVQ Rom. I'm trying to figure out how Infiniti350 was able to flash a JVP Rom.
Click to expand...
Click to collapse
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Infiniti350GT said:
I just followed the exact instructions the OP posted up above. With 1 mishap, when I downloaded what I thought was the ROM....I only got the lock-screen (what happens when you read things way too fast & think you know what you did) which I already downloaded and flashed
I mounted the SD card while in recovery and pushed the file containing the ROM over to the phone - flashed it - flashed LinuzBozo's stuff - rebooted & things went well all I had to do was add APN's back.
I really like my current set up BUT I'll probably find something else, before I load the ROM I want I'll run this again with a JVP base and see how things go & defiantly let you guys know. Now I'm curious why it doesn't work for other people.
Click to expand...
Click to collapse
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Well, i just finished wrapping up my favorite roms, and i keep jumping between the Sensation rom, and Darky's Rom .
BUT!
I always data wipe, clear cache, factory reset
Idk if this helps, but i saw theres a new Linuz BETA 6 , perhaps this might help problems that a few have been going through.
In closing, i really hope more ROMS designed for the Infuse come fast , i got a feeling with this new mod there will be many to come
Entropy512 said:
I think sometimes people either have a bad flash or don't properly wipe data. Same reason lots of people randomly had problems with Infused. (I haven't tried JVP myself though.)
Click to expand...
Click to collapse
This is a very good point. The data wipe is vital for the Infuse no matter what. I have tried it with and without the wipe & all sorts of very strange things go wrong at random. Market apps wont download - Errors when using data - Youtube errors - issues with email. Each time I did it different ones would act up too, never the same.
Full Wipe so far has fixed it without failure
*Edit - Full for me same as prasadudwadia said above - data, cache, and factory reset.