Related
Does anyone have the leaked update file so I can download without having a data connection on my cell phone? I had to get the leaked update for my Asus but now they have the official on their site. Hoping someone has the att update file so I can do the same.
Sent from my Transformer TF101 using Tapatalk
Here it is as it showed up in my /sdcard/Download/ directory, but I don't know how you can force it to update without going through the actual OTA process.
http://hoxnet.com/droid/OTA_Ace_Cin...80_502_3_P_release_186225z4g9g65j9b7kolus.zip
I havent looked at the file but couldnt you just rename it to pd98¿
Sent from my Inspire 4G using XDA Premium App
mudknot2005 said:
I havent looked at the file but couldnt you just rename it to pd98¿
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
No. It is an edify type update that contains a PD98IMG type update inside (called firmware.zip).
Even though it is an edify type update, it won't install from recovery unless you hack out some of the ASSERT checks (since recovery doesn't have all the getprop values that a running system has).
Would it be possible to pull the information from the update part, and convert it to a hbkot update.
Just curious, if we were able to, id post it in the guide for easy reference.
Sent from my Inspire 4G using XDA Premium App
How do you put the Inspire 4G into recovery mode? My Asus I can hold down the volume down key and power button to get a specific menu my Inspire doesn't.
BlackKnight said:
How do you put the Inspire 4G into recovery mode? My Asus I can hold down the volume down key and power button to get a specific menu my Inspire doesn't.
Click to expand...
Click to collapse
You're doing it wrong somehow then because that is exactly how you do it on the Inspire. Make sure fastboot is off in the settings though (Settings->power->fast boot).
mudknot2005 said:
Would it be possible to pull the information from the update part, and convert it to a hbkot update.
Just curious, if we were able to, id post it in the guide for easy reference.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
What's an hbkot?
Gene Poole said:
What's an hbkot?
Click to expand...
Click to collapse
hboot, I was typing on the phone and I have stupid fingers.
mudknot2005 said:
Would it be possible to pull the information from the update part, and convert it to a hbkot update.
Just curious, if we were able to, id post it in the guide for easy reference.
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
Not really. This update contains a number of "patch" files that use a method of updating files in-place by applying a patch that just replaces the parts of the file that changed. It's like a diff file is for text files, but it's binary. The only way I know of to apply these is through edify commands (or manually patching them on a PC first with bsdiff, see: http://linux.die.net/man/1/bsdiff).
I believe my phone may have been previously updated. What information lets you know it has?
Here is phone's information:
Android version
2.2.1
Baseband version
12.39.60.19H_26.06.04.06_M
Kernel version
2.6.32.21-g3c8447
[email protected] 18-2 # 1
Build number
1.80.502.3 CL318736 release-keys
Software number
1.80.502.3
Browser version
Webkit 3.1
Also has there been any update Android OS updates i.e. 2.3 Gingerbread released?
BlackKnight said:
I believe my phone may have been previously updated. What information lets you know it has?
Here is phone's information:
Android version
2.2.1
Baseband version
12.39.60.19H_26.06.04.06_M
Kernel version
2.6.32.21-g3c8447
[email protected] 18-2 # 1
Build number
1.80.502.3 CL318736 release-keys
Software number
1.80.502.3
Browser version
Webkit 3.1
Also has there been any update Android OS updates i.e. 2.3 Gingerbread released?
Click to expand...
Click to collapse
Your phone hasn't updated, and no.
The new base is 1.84
Sent from my Inspire 4G using XDA Premium App
That stinks, I guess ill have to wait until Im back in the US.
Sent from my Transformer TF101 using Tapatalk
I cant root this firmware with oneclick!http://img.tapatalk.com/4f659612-ccd0-43c3.jpg[/IMG
Sent from my GT-I9100 using XDA App
Any idea anybody?
Sent from my GT-I9100 using XDA App
Where did you get the firmware from? The ones posted in the dev forum do work with super one click. If I can get hands on this firmware I can try to root it too and tell you my results.
I got it from service. Its almost perfect. Fast, no bugs, no FC, but different from v 20. So oneclick 1.9.5. Is not working. Without root I cant backup and upload it.
Sent from my GT-I9100 using XDA App
Any ideas how to get it of the phone. This is prerelease so final will have same problem.
Sent from my GT-I9100 using XDA App
Rastko said:
Any ideas how to get it of the phone. This is prerelease so final will have same problem.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
What's the error you get using superoneclick?
I think that if you change the title more peoples will come and try to help. For example, new gingerbread version......etc.
It's hard to help beacuse we don't have this firmware.
Try super one click 2.1
Try zergrush
Sent from my R800x using XDA App
Link
http://forum.xda-developers.com/showthread.php?t=803682
Ok. I'll try that tomorrow. I tried 2.1 with auto setting. It comes to step 6 and stays there forever. Same happens with 1.5.9 It works till starting psneuter and then stays there indefinetely. Thanks for suggestions. If I root it I'll CWM it and post the backup.
Sent from my GT-I9100 using XDA App
why not install the rom which have been rooted? or do i misunderstand your meaning?
sorry for my bad english
Open this link:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=HerePutYourIEMI
Make sure to replace this HerePutYourIEMI by your phone's IEMI number, then, hopefully you will the download link for the current rom inatalled in your phone, in kdz format, post it here, then everybody can test and look for a way to root.
taiwanesefbi said:
why not install the rom which have been rooted? or do i misunderstand your meaning?
sorry for my bad english
Click to expand...
Click to collapse
His version is the newset version out there so far so we want him to back it up with CWM and post it in the development section.
abo_mara7 said:
Open this link:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=HerePutYourIEMI
Make sure to replace this HerePutYourIEMI by your phone's IEMI number, then, hopefully you will the download link for the current rom inatalled in your phone, in kdz format, post it here, then everybody can test and look for a way to root.
Click to expand...
Click to collapse
I think, it will not work.
Wait one week more and we will get official GB
adixtra said:
I think, it will not work.
Wait one week more and we will get official GB
Click to expand...
Click to collapse
Sure, we will wait for the final release but if we got the chance to test the latest available version why not? It worth the try, at least for me. By the way, I am running the old leaked GB and I am very happy, no lag at all and some good new features.
Rastko any luck rooting? Which country was the service flash done.
Tried gingerbreak?
superoneclick 2.2
Ok, superoneclick 2.2 is not working. Is comes to step 7 and that's it.
The web address that was posted with imei to fill in - how do I use it? Do I have to connect phone to computer, or do I log over the phone? Whats suposed to hapen when I log in?
C'mon fellas, some more ideas?
DoomLord _v2 also not working. It goes all the way but can't root the thing. After reboot its still not rooted
I just rooted my phone yesterday and removed all the bloatware (big thanx to Lumin30)
Now I'm wondering if I can make it even snappier without flashing too much stuff on it.. since I'm too new to this business and would prefer having my phone mostly stock
Sent from my SGH-T959V using XDA App
Boat browser is the fastest I've used. DL from market.
If you have cwm installed. I'm assuming you do since you're rooted. Dsexten's adrenalin shot and the scroll mod can work wonders for making things snappy while maintaining a stock phone.
Sent from my SGH-T959V using XDA App
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
For actual data speed, you can probably make it faster by leaving your phone on CDMA mode only (keeps you locked in 3G/4G). If left in Auto mode, it will revert to EDGE when you aren't using data.
I feel like it makes a noticeable difference, since your phone won't need to switch back and forth.
As for the actual speed of a browser, I've been using Dolphin since I got my phone. It's very snappy.
AlexSochi8 said:
I just rooted my phone yesterday and removed all the bloatware (big thanx to Lumin30)
Now I'm wondering if I can make it even snappier without flashing too much stuff on it.. since I'm too new to this business and would prefer having my phone mostly stock
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Flash ICBINB 2.3.7 from dsex its stock with all the tweaks included trust me its fast
and its WCDMA to the post above
Thank's aren't asked for but appreciated
Thanx.. can u please tell me a way to flash that... I'm new to this. My phone is rooted thru superoneclick.
I'm on stock gingerbread. I would love to be able to run that rom since it will free up a lot of system storage... is it glitchy at all?
Sent from my SGH-T959V using XDA App
AlexSochi8 said:
Thanx.. can u please tell me a way to flash that... I'm new to this. My phone is rooted thru superoneclick.
I'm on stock gingerbread. I would love to be able to run that rom since it will free up a lot of system storage... is it glitchy at all?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
It will be easy for you. First download SGS Kernel Flasher from the market.
Thanx again Lumin... I downloaded the kernel flasher, what do I do now
Sent from my SGH-T959V using XDA App
Read the first link in my signature where it talks about SGS Kernel Flasher.
ADD:Alex - Let me know if the directions were clear or if you need any additional help.
It was somewhat clear... I appreciate u making that thread and taking ur time to answer but I'm still somewhat clouded... I need to install a kernel with vodoo lag fix before I install a rom.. when I go to the link of vodoo lag fix it says attention its still buggy and vodoo sound maybe coming soon... all of that is making me somewhat worried... but the rom flashing steps are confusing to me since I'm like a blind baby to this flashing stuff.
Sent from my SGH-T959V using XDA App
AlexSochi8 said:
It was somewhat clear... I appreciate u making that thread and taking ur time to answer but I'm still somewhat clouded... I need to install a kernel with vodoo lag fix before I install a rom.. when I go to the link of vodoo lag fix it says attention its still buggy and vodoo sound maybe coming soon... all of that is making me somewhat worried... but the rom flashing steps are confusing to me since I'm like a blind baby to this flashing stuff.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
If you don't want to use the kernel then you can use KJ1. I haven't had a problem with the kernel. And when you flash the custom ROM it will have that same kernel -- just updated. You only flash that kernel to get CWM to flash the ROM. When you flash the ROM it comes with a kernel that will overwrite the kernel you flash with SGS.
And Voodoo sound is not the same as Voodoo lagfix.
You just need to follow the direction to get where you want. If you think some of the directions are clear... then tell me which one's and how. I will take a look at and see if I can make them clearer.
lumin30 said:
If you don't want to use the kernel then you can use KJ1. I haven't had a problem with the kernel. And when you flash the custom ROM it will have an that same kernel -- just updated. You only flash that kernel to get CWM to flash the ROM. When you flash the ROM it comes with a kernel that will overwrite the kernel you flash with SGS.
And Voodoo sound is not the same as Voodoo lagfix.
You just need to follow the direction to get where you want. If you think some of the directions are clear... then tell me which one's and how. I will take a look at and see if I can make them clearer.
Click to expand...
Click to collapse
Check your mounts in mounts and storage and read the OP of ROM for correct mounts – U=Unmount / M=Mount. I had to change some coming fresh out of the box.
o Then choose 'install zip from sdcard', then 'choose zip from scard', then go to bottom, find ROM you copied over, select install and wait.
thats a lil confusing...
and to double check the first step:
all i have to do is download Subtly Modified Stock for T959V KJ6 v0.1.1-rc1 and flash that kernel with kernel flasher from the market? simple as that?
Yes on the kernel.
Don't worry about the mounts. I need to change that. The aroma installer will handle that for you now. What ROM are you going to flash?
ICBINB 2.3.7 since I read its mostly stock with no theming and is super fast and only uses 46mb internal space since it heavily debloated... would u recommend it?
BTW thanx again man!
Sent from my SGH-T959V using XDA App
Yes.
Go reread the guide. Take notes when you go through. PM me anything you think needs to change or be added. If you have flashed the kernel - just flash it - follow the directions to flash the ROM and you are good to go. Take note of the steps in the Aroma Installer you do and PM those also and I will add them to the guide. Aroma Installer is what you will see after you select install for the ROM.
lumin30 said:
Yes.
Go reread the guide. Take notes when you go through. PM me anything you think needs to change or be added. If you have flashed the kernel - just flash it - follow the directions to flash the ROM and you are good to go. Take note of the steps in the Aroma Installer you do and PM those also and I will add them to the guide. Aroma Installer is what you will see after you select install for the ROM.
Click to expand...
Click to collapse
OK I'm going to flash it this Tuesday night after work... ill let u know how it goes
Sent from my SGH-T959V using XDA App
AlexSochi8 said:
OK I'm going to flash it this Tuesday night after work... ill let u know how it goes
Click to expand...
Click to collapse
Hopefully you noticed when I said reread the guide it is because I updated it. I am asking for your input as somebody fresh using the guide. I know what I am doing and it is easy to leave out the little steps when writing the guide that noobs may need. Hopefully you can help make it a better guide!
Good luck!
Ye I understood u brother... ill let u know if there are steps to add for other newbs
Sent from my SGH-T959V using XDA App
Hey Lumin.. so I did like u asked I believe u did miss a step.. I just installed quick boot.. did a back up... but from cwm recovery I don't know where to navigate to install the icbinb rom... it has a list.. back up.. reboot.. update zip file or something like that... etc which one do I chose? And do u need to extract the icbinb rom zip file? Or just put it like that in the root of my sd? Before that do I need to wipe anything? Thanx a lot again
Sent from my SGH-T959V using XDA App
Hi, I hate to say this but PLEASE HELP ... lol... been saving that one for a while.
I have a S2 Skyrocket LTE the Canadian rogers version, I have been running great on JB CM10 for months now, and all of a sudden once in a while, or often I should say the phone says "NO SIM CARD" so if i restart a few times, battery pull, it will most times come back and I can use my phone fine for a bit.. than boom.. it does it again..
I noticed in the about section it says Baseband UNKNOW so i did a hour of research and can't find a solution, I am confused why this could happen.. if anyone could help me out i would love you.
Flash the radio again. Try one of the newer ones.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
can you tell me where to get a radio, and how to flash the radio ?
I have my phone rooted and unlocked to put in cm jelly bean for skyrocket.. I used another PC i think odin or somthing i used.. it was a challange.
Can i flash a radio in recover mode CWR mode.. or do i need a pc and stuff to do it ?
thanks
Try mohans ucmc1. Find it in the development forum. Flash it in your custom recovery.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I edited my other reply...
So this "radio" you link to, is it giong to work for Rogers in Canada still and allow my phone to be used internationaly with other sims still ?
I know i have a "custom recovery" as I remember something about that, I don't know what it is, i know how to boot up in recovery mode.. I think that is what you mean, and then i just find the file you point to and instal it that way ?
Will this change only the radio and not all my data and system changed on the phone ?
THANK YOU SO MUCH>>
It'll only change the radio. Won't affect anything else.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
thanks... ok so one thing.. what i am finding is that there is a "stock" rom by this author that is flashable, how do i get only the radio that you mentioned, do i unzip this rom 1st and the radio is in there, or am i just not seeing the radio only file ?
Questions go in Q&A
Thread moved
blendobass said:
thanks... ok so one thing.. what i am finding is that there is a "stock" rom by this author that is flashable, how do i get only the radio that you mentioned, do i unzip this rom 1st and the radio is in there, or am i just not seeing the radio only file ?
Click to expand...
Click to collapse
There's a stick radio too
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
It worked, I flashed it and it says i have a baseband number in the about phone area..
I do notice that my signal might have dropped, I wonder if it is possible to get the Rogers radio for this and flash it and see if it has better signal or if this one would be the same ?
I most times have 2 bars - 3 and now have one, sometimes changes.. but we will see,
Thanks
blendobass said:
It worked, I flashed it and it says i have a baseband number in the about phone area..
I do notice that my signal might have dropped, I wonder if it is possible to get the Rogers radio for this and flash it and see if it has better signal or if this one would be the same ?
I most times have 2 bars - 3 and now have one, sometimes changes.. but we will see,
Thanks
Click to expand...
Click to collapse
If you want to try a different one try xuma7. It was taken from the Rogers rom. I think mohan did that one too
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Or, try UXUMA7 which is come with the stock Roger JB ROM. link as follow:
http://forum.xda-developers.com/showthread.php?t=2155984
ka724ka said:
Or, try UXUMA7 which is come with the stock Roger JB ROM. link as follow:
http://forum.xda-developers.com/showthread.php?t=2155984
Click to expand...
Click to collapse
Is there an echo in here?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Is there an echo in here?
Sorry, had to.
mrfeuss said:
Is there an echo in here?
Sorry, had to.
Click to expand...
Click to collapse
I tried and wasn't aware of any. But YMMV.
Hello there,
I got a problem with installing Open Pdroid on my Galaxy s I9000. Its rooted and running on CM 10.1.0-RC2 and Android 4.2.2.
The thing is, I can't figure out what exactly I am doing wrong.
I used Kobik77's ApG to create the update.zip and restore.zip and had no further issues with it.
On my phone I entered CWM and installed the .zip without any error.
I installed PDroid Manager via Google Play.
So far so good. But now PDroid Manager says: "The PDroid Core has not been detected on your device."
As of now I am not sure whether the patching Process via ApG has been a failure, something went wrong
when installing it via CWM, the PDroid Manager has been buggy, or none of it and I just missed
some detail, like the version I am using is not supported (though I am pretty sure I read somewhere that 4.2.2 and CM 10.1 are supported).
Any help is greatly appreciated.
Edit: my problem has slightly changed. PDroid manager now always asks me to configure it when i install a new app. But when i attempt to do so, it says: "PDroid Manager has been closed."
When i open PDroid manager via the apps icon it still tells me that open pdroid Installation cannot be detected.
- If there is any additional information u need, I'll gladly provide it.
- I hope this is the right place to post it.. I already tried to post in
the dev forum (permission denied) where an information kindly
directed me here .
- And one last thing .. go easy on me I am new to smartphones
in general and have only aquired some basic knowledge through
reading.
chuSmu
An ideas?
Sent from my GT-I9000
puuush .. please
Is there really no one with an idea? Ort am i just posting in the wrong place?
ANY answer is greatly appreciated!!
Sent from my GT-I9000 using xda app-developers app
chuSmu said:
Is there really no one with an idea? Ort am i just posting in the wrong place?
ANY answer is greatly appreciated!!
Click to expand...
Click to collapse
Hadn't seen these posts before, sorry.
You are only flashing the update.zip file, and not the restore.zip as well?
I use ApG to build openDroid for my LG 4X HD and it works fine.
Hello, first of all thanks for the reply! Yes i only flash the update zip. Flashing the the restore zip would defeat the purpose right?
Sent from my GT-I9000 using xda app-developers app
Any other ideas?
Sent from my GT-I9000 using xda app-developers app
chuSmu said:
Hello, first of all thanks for the reply! Yes i only flash the update zip. Flashing the the restore zip would defeat the purpose right?
Click to expand...
Click to collapse
I can't think of anything obvious that would cause this. Are you running the stock Kernel? I would suggest trying a totally clean install of CM with the .zip file you created by ApG. Don't install anything other than the pDroid Manager and test it again. If it's still not working then try with a newer version of CM, possibly the latest nightly for your device.
SimonTS said:
I can't think of anything obvious that would cause this. Are you running the stock Kernel? I would suggest trying a totally clean install of CM with the .zip file you created by ApG. Don't install anything other than the pDroid Manager and test it again. If it's still not working then try with a newer version of CM, possibly the latest nightly for your device.
Click to expand...
Click to collapse
Actually i have no idea if i run the stock kernal, as I said, I am pretty new to smartphones.
"3.0.76-gc0a8d45
[email protected] #1"
..is what it says in the phone's settings. Doesn't sound like a stock to me.
I will install the latest nightly build first and try it again. If possible i want to avoid to go through the trouble
of reinstalling all my apps. Seems like I have to find a good backup solution earlier than expected if I
want to keep as much of my data as possible >.<
Well thanks again for taking the time to deal with my problem!
chuSmu said:
Actually i have no idea if i run the stock kernal, as I said, I am pretty new to smartphones.
"3.0.76-gc0a8d45
[email protected] #1"
..is what it says in the phone's settings. Doesn't sound like a stock to me.
I will install the latest nightly build first and try it again. If possible i want to avoid to go through the trouble
of reinstalling all my apps. Seems like I have to find a good backup solution earlier than expected if I
want to keep as much of my data as possible >.<
Well thanks again for taking the time to deal with my problem!
Click to expand...
Click to collapse
The kernel sounds stock - if you don't remeber flashing a different kernel then you're fine. If you're that worried about losing your apps then just flash the latest nightly and use ApG on that version to try - but do a NanDroid backup of everything first, just in case.
SimonTS said:
The kernel sounds stock - if you don't remeber flashing a different kernel then you're fine. If you're that worried about losing your apps then just flash the latest nightly and use ApG on that version to try - but do a NanDroid backup of everything first, just in case.
Click to expand...
Click to collapse
OK i screwed and bricked my phone Anyway i managed to try a few things:
I flashed latest CM nightly and tried to get Open PDroid via the update zip from ApG --> failed
I did factory reset and wiped the cache / did a clean install of ONLY (I just tried randome stuff here) the update zip --> failed
I did factory reset and wiped cache / did a clean istall of latest CM nightly, rebooted and installed the ApG update zip --> failed
Each time the PDroid Manager wasn't able to detect a, in my case Open PDroid, installation.
I noticed that it took especially long to initiate the download of PDroid Manager, I mean the bar before the actual download starts. It took a few minutes until sth. happened. Though i doubt it has anything to do with, I just wondered if it may be conflicting with anything in the system. But probably just due to the reset.
I am getting desperate here
Well anyway.. I may have done a mistake,but realized it too late: Did u mean to install without the gapps? .. I did install CM with gapps...
If I was meant to install CM without gapps i will try that tomorrow!
If any different ideas come to mind.. I will try anthing else too.
thanks again..
Hey, my phone's fixed and my problem changed a little, but i dont know if i it is any
progress.
PDroid Manager still displays the same message, that Open PDroid core could not be
detected, but whenever i istall a app now, it asks me to configure it.
When i press the button in the status bar, where it appears, it just says: "PDroid Manager has
been closed".
So basically i can't do anything with it, but it sometimes tells me it's there
any suggestions?
Maybe anyone has the same issue?
I'd be happy if you shared your experience.
Sent from my GT-I9000 using xda app-developers app
Anyone pretty pleaaasseee
I really want to get this working.
Sent from my GT-I9000 using xda app-developers app
No further suggestions?...
Sent from my GT-I9000 using xda app-developers app
chuSmu said:
No further suggestions?...
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
If OpenPdroid isn't working, have you tried Pdroid2.0? It's not the best solution, but it is one.
Thanks for your reply. I might actually try that. I'd really like to get open pdroid working though or at least understand why it doesn' t. So if there are some other solutions i'll be happy to hear about them.
Sent from my GT-I9000 using xda app-developers app
chuSmu said:
Thanks for your reply. I might actually try that. I'd really like to get open pdroid working though or at least understand why it doesn' t. So if there are some other solutions i'll be happy to hear about them.
Click to expand...
Click to collapse
I've been offline for a few days so am only just catching up on stuff. Given the problem you are now having, I'd suggest run ApG and copy the entire text output from the log. Post that along with a description of the problem you're having onto the ApG Dev thread, and also a logcat if you can.
Hi SimonTS thanks for directing me to the dev forum. I got my Problem fixed. The reason it didnt work is pretty embarassing though .
I had a old version of apg and/or the open pdroid Version that comes with it. everything works just fine now. Thanks for your efforts.
Sent from my GT-I9000 using xda app-developers app
chuSmu said:
Hi SimonTS thanks for directing me to the dev forum. I got my Problem fixed. The reason it didnt work is pretty embarassing though .
I had a old version of apg and/or the open pdroid Version that comes with it. everything works just fine now. Thanks for your efforts.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Why don't you post the solution here? It might help someone else.
Edit: Sorry my bad, I just can't read