What's up guys, for those of us lucky enough to be using the G1 already, put of a list of what bugs that need to be fixed and improvements that need to be made. Since anyone can develop 'droid, the more nags are brought up, the more likely they'll be fixed.
I've noticed the following.
2JRo said:
1) When and mms is sent in a thread - it'll auto resend once I receive a reply.
Click to expand...
Click to collapse
>>> This was mostly user error since I was accidentally hitting send again - RC29 fixed it my not making SEND the default option.
2JRo said:
2) USB connection - not sure if this is a windows error or android error, but I get an "I/O device error" when connecting. Using an 8gb sd card.
Click to expand...
Click to collapse
>>> Since RC29: no more I/O error, but now getting "No Disk Found." Android does indicate it has a USB connection though.
3) No indication of sms received if screen off and phone on silent. The status light will blink green for a notification, but with charger connected there's no telling aside from vibrate
I edited this original post a bit since the RC29 update - if there's one thing I can thank that update most of all its the speedup on the camera time. I have kids and you can't get them to hold still for nothin! After the update I was able to snap pics with them swinging at the park even and they came out fine.
bt and wifi
Hey, im not positive but im pretty sure you can make a shortcut to things like settings on your home screen, so then it would only be maybe two taps away? idk, i gotta wait two more days to be sure =/
shortcut only available to settings not directly to comm manager AFAIK, which only takes it to 3 taps.
When you choose to reply to a message from a notification it does not go in the subject feild but instead to the sent feild. (I want to type right away its a habit and when I do its in the contacts...
Hey,
For accessing the SD Card make sure you go to settings - Storage and SD Storage Settings, and enable USB Mass Storage Mode. If you go to Android Market - there is a program called AnyCut 0.6, you can make a wifi toggle button and bt toggle button on the home screen.
Valicore said:
Hey,
For accessing the SD Card make sure you go to settings - Storage and SD Storage Settings, and enable USB Mass Storage Mode. If you go to Android Market - there is a program called AnyCut 0.6, you can make a wifi toggle button and bt toggle button on the home screen.
Click to expand...
Click to collapse
Which Android Market is that? I looked through all the apps today and didn't see anything like that.
The marketplace should be back to normal tomorrow for the release. They've been updating all the apps and the marketplace itself for the release day.
good point, B. I hadn't thought of that.
The only other app I need is for Google Docs to have the ability to edit. I didn't realize until I started trying to input numbers into a spreadsheet (my workout stats, gym geek, I know) that I realized that's read-only.
By the way, what's the point of a read-only spreadsheet? That's like having a fridge that opens up and just has pictures of food in it.
for some reason the music app won't play my mp3s?! any ideas?
I've noticed twice now that my phone just stops recognizing my SD card. I have to take it out then put it back it for the phone to pick it up.
speoples20 said:
I've noticed twice now that my phone just stops recognizing my SD card. I have to take it out then put it back it for the phone to pick it up.
Click to expand...
Click to collapse
Happened to me as well.
2GB SanDisk microSD
Please add this bug to the list. microSD card is unmounted randomly and must be reinstalled to remount.
1. When the phone is off and connected to via USB cable it didn't seem to charge. At least the charging LED didn't come off if the phone was off. But then again it might be charging and just might be a bug in the led.
2. Cannot save images sent via MMS sent from other G1 users. This needs to be fixed.
Battery life is disappointing
I am sure it is because of the newness, had to charge the phone 3 times yesterday. This morning had it off the charger for less than and hour and phone was down to 70% charge. I just disabled autosync and gps, lowerred the brightness. Wil see how that affects things.
2JRo said:
5) Not a bug; but another WinMo thing I am used to - Wifi and Bluetooth need to be more than 4 taps away. There might be an app to fix this but as for now - going to wifi/bt isnt simple.
Click to expand...
Click to collapse
There is an app call Any Cut that allows you to make all kinds of custom short cuts on your homes screen. I used it to get to wifi/bluetooth in one tap. Its an awesome app.
speoples20 said:
There is an app call Any Cut that allows you to make all kinds of custom short cuts on your homes screen. I used it to get to wifi/bluetooth in one tap. Its an awesome app.
Click to expand...
Click to collapse
How?
I can only get it to get me to the wireless settings.
Lost in call audio
For some reason lost all audio incoming and out going on a call, it showed i was in call but i could not hear anything and the caller could not hear me. I did not change any settings, was on a call like 10-15 minutes prior to this with no issue.
I was able to clear the issue when i soft reset the phone.
nitefallz said:
How?
I can only get it to get me to the wireless settings.
Click to expand...
Click to collapse
It's in the same category "Activity"
There should be a "Bluetooth Settings" to choose, I have both on my screen now. Maybe in an update we'll be able to edit the icon from Any Cut.
syrusfrost said:
Happened to me as well.
2GB SanDisk microSD
Please add this bug to the list. microSD card is unmounted randomly and must be reinstalled to remount.
Click to expand...
Click to collapse
Is it an Android bug? or is it a bug with a select few handsets...this has never happened to me so far...or any/most of the members of the android community.
AbsoluteDesignz said:
Is it an Android bug? or is it a bug with a select few handsets...this has never happened to me so far...or any/most of the members of the android community.
Click to expand...
Click to collapse
Well it happened to me on our store demo and my phone but they are from an early batch. So it could possibly be from an early batch.
nitefallz said:
How?
I can only get it to get me to the wireless settings.
Click to expand...
Click to collapse
Open Any Cut and select activity. The scroll down to WIRELESS CONTROLS. Select that and it will make a short cut for you. When you press the icon it should open the wireless controls, there you have access to wifi and bluetooth.
So I`m new here and if my thread is not on the right place - sorry. And here it is my problem:
I`m using Widgetsoid Switcher Widget and have this very annoying problem that when i turn on something it not works (For example: I turn on my data service, widget indicates that it`s turned on but actually it's not. If I turned it on from the Settings menu the widget indicates it`s turned on and when I stop it from the widget it doesn`t stop). Same with WiFi and GPS... This thing is freaking me out so if somebody can help me it would be great or if you can tell me other app like that one with options for customization. Thanks in advance
Can`t somebody help me?
podmatrix said:
Can`t somebody help me?
Click to expand...
Click to collapse
Hi,
Try to uninstall, install and reboot directly after install (it's important!).
After go to global preferences and check "Disable all apn"
Create your widgets and it will be ok.
Now everythings is fine but Data Service still doesnt't work... Any ideas?
data toggle help
i had the same problem with the data/3g toggle on my htc evo. what you have to do is go to "settings->wireless & networks->then scroll down and make sure there is a check mark in the "mobile network" setting" in order for the widget to control it the setting must first be enabled. it took me and the dev 3 days to find this out.
also if that doesn't work go into the app itself and as soon as it opens it you should see something at the top that says data toggle mode. make sure that setting is set to "APN toggle" and not "APN rename"
hope this helps. remember to rep if it did
Thanks man
No problem
Sent from my PC36100 using XDA App
I had a similar problem today, it looks like the data switch in Widgetsoid places a dash in front of your AccessPoint name in order to block data transfer and removes that dash when you click switch again.
After messing with Widget I was not able to connect to net, I installed, uninstalled, etc, and then I noticed that APN list was empty, I had to add the APN again and restart it, I think (as said above) that you need the data to be ON then do a restart in order for Widgetsoid to properly read the status.
If you're rooted, use the new "root method" to toggle data. It doesn't mess with your APN & it works flawlessly for me. It's the first time I've had a data toggle that actually works.
A simple method
FIX = Settings>Location & Security>Select Device Administrators> *Uncheck Widgetsoid
Uninstalled
Thanks to: mr.noobsalot
I know this is an old thread, but where is the global preferences on version 3.4.1 it doesnt appear when I click apply.
Im using a HTC sensation and ICS.
Thanks
bump
euqiddis said:
bump
Click to expand...
Click to collapse
Stay FAR away from Widgetsoid. It can slow a Galaxy S5 down to a Crawl. Your Dialer will not function, Your phone will not respond. Its trying to load your phone with Ads or something and keeps your CPU busy, whether its a dual core or quad doesn't matter. Developer does not respond and does not seem to care. After uninstalling this App, the phone feels "new" again.
I believe this app is some type of Spyware/Malware combo. Why does it need access to my Contacts? Something very fishy and the developer never responds. It's a great Widget when it works but certain things about it don't seem right. Uninstalled!
Hi,
I just purchased an x96 box and was looking through the features when I saw the security feature for setting up a resticted profile. Since I have kids I thought it would be good to set one up, so created my password and then clicked "enter restricted profile". Not only did it restrict the apps that were availible to me, but now in the sttings tab all the buttons are gone (except for network) so I can't change any settings. As well there isn't anything for me to toggle back to normal profile. I basically am stuck in restricted profile and cant change it. When I turn on and off the box it comes back on in regular mode (all the apps), but then 5 seconds in it says "switching to restricted profile" and I cant make any changes to settings.
Anyone who can help would be a lifesaver.
Cheers
Android
Archiero said:
Hi,
I just purchased an x96 box and was looking through the features when I saw the security feature for setting up a resticted profile. Since I have kids I thought it would be good to set one up, so created my password and then clicked "enter restricted profile". Not only did it restrict the apps that were availible to me, but now in the sttings tab all the buttons are gone (except for network) so I can't change any settings. As well there isn't anything for me to toggle back to normal profile. I basically am stuck in restricted profile and cant change it. When I turn on and off the box it comes back on in regular mode (all the apps), but then 5 seconds in it says "switching to restricted profile" and I cant make any changes to settings.
Anyone who can help would be a lifesaver.
Cheers
Click to expand...
Click to collapse
I am having the same exact issue. Can you please let me know when you get some resolve
Thanks
I ended up doing a factory reset. Click on the apps button on the home page. Near the bottom is a button that says "backup......". Clicked on that and checked off delete data and delete "something" then hit restore. Good to go.
Hope that helps.
Let sera...
Ok so I got a x96 foolishly done the same thing. Here's how to set it again. While the power is off in the av point on the rear of the box poke a match stick in and there is a button insode. Hold it down. It will come up with options like a boot sort of setup options. I went to clear data or something along those lines and boom back to factory settings. I looked everywhere for a reset button it was only because company I purchased from advised me it was there.
Ditto! Is ther e any other option than reseting factory settings? How can i apply the original passcode I entered?
Did you get it fix?
Archiero said:
Hi,
I just purchased an x96 box and was looking through the features when I saw the security feature for setting up a resticted profile. Since I have kids I thought it would be good to set one up, so created my password and then clicked "enter restricted profile". Not only did it restrict the apps that were availible to me, but now in the sttings tab all the buttons are gone (except for network) so I can't change any settings. As well there isn't anything for me to toggle back to normal profile. I basically am stuck in restricted profile and cant change it. When I turn on and off the box it comes back on in regular mode (all the apps), but then 5 seconds in it says "switching to restricted profile" and I cant make any changes to settings.
Anyone who can help would be a lifesaver.
Cheers
Click to expand...
Click to collapse
I know I'm a 'lil late to ask u if u got by the restricted profile... if not... I found out by looking with my phone flash light there's a reset button through the speaker...
Did you get it
mightyjoe123 said:
I am having the same exact issue. Can you please let me know when you get some resolve
Thanks
Click to expand...
Click to collapse
I know I'm a 'lil late to ask u if u got by the restricted profile... if not... I found out by looking with my phone flash light there's a reset button through the speaker...
X96 restricted profile problem
Now any new solution? When I set PIN code and apply restricted profile after that I cannot reverse normal mode, can't apply PIN code
With a factory reset ?
So did anyone work out how to get back removing restricted profile without a factory reset. It seems so counter productive...
Thanks.
Hope it works for you too.
Okay. So, I didn't see a reset button hidden anywhere, but I didn't wanna have to do that anyways. What I've found is that when you turn it off and back on, you can go back out of restricted mode. You just need to be really fast before it re-enters restricted mode again. You have about ten seconds. It's best to connect a mouse because it takes longer to scroll to the apps and options using the remote. But I did everything in time because my password was 0000. As soon as it turns back on, as quickly as possible, go to settings, >security & restrictions, then go to turn off restricted profile. Quickly enter your passcode and you're home free! After that, I'd highly recommend deleting restricted profile. Hope this works for you too!
---------- Post added at 06:26 PM ---------- Previous post was at 06:23 PM ----------
sammyDC said:
So did anyone work out how to get back removing restricted profile without a factory reset. It seems so counter productive...
Thanks.
Click to expand...
Click to collapse
Okay. So, I didn't see a reset button hidden anywhere, but I didn't wanna have to do that anyways. What I've found is that when you turn it off and back on, you can go back out of restricted mode. You just need to be really fast before it re-enters restricted mode again. You have about ten seconds. It's best to connect a mouse because it takes longer to scroll to the apps and options using the remote. But I did everything in time because my password was 0000. As soon as it turns back on, as quickly as possible, go to settings, >security & restrictions, then go to turn off restricted profile. Quickly enter your passcode and you're home free! After that, I'd highly recommend deleting restricted profile. Hope this works for you too!
Yours is the best idea to solve the issue. Unfortunately my GT1 is so fast, that gives me only 1 second. The same is with wired mouse. Is there any experience, if after master (pinhole) reset the Google account should get back all (Kodi reppositories, YouTube account,...) settings ?
I have exactly the same problem with my Philips 49PUS7502/12 Android TV. I even didn't set up a PIN CODE for it. I can't get out of this profile. Any solution rather than factory reset? I have many apps and customization.
First off, mods, forgive me if I'm posting in the wrong spot. I generally have a device that goes into a specific forum, but I didn't find a treadmill forum lol, so general android was my best guess.
This mod is a no-root solution to prevent privileged mode from being disabled by iFit. It makes no changes to /system, so it is 100% reversible by doing a factory reset. This mod starts by disabling the factory iFit apps in the system, then installing the latest official iFit standalone app as a user app. Going this route still allows the new iFit app to interface correctly with the treadmill, but prevents it from overwriting privileged mode. All these instructions are written for Windows, but I believe it will work on other OS’s command line, so long as adb is already installed in that OS. If you are on Windows, you do not need to install adb, as it will run right out of this folder.
There are other apps included in this mod as well. Nova is a replacement launcher, essentially your new desktop. The included Netflix and Hulu apps are the correct versions for this build. Chromium browser is the open source build of Google Chrome, and it works great. The file manager is hard to access on the treadmill, so I added file explorer. If you download apps from the internet, you can install them by finding them with file explorer. Termux is a terminal emulator, for us nerds. Rotation_control will be used to properly orient the screen easily. All of the apps that are installed in this procedure are user apps, so they can be easily uninstalled if you don't want them.
The only model I have personally confirmed this works on is the Nordic X32i, but I'd imagine it could work on any Nordic iFit equipment that uses an Android 7.1 tablet and can enable USB debugging. If you try this on another piece of equipment, post if it works or not, and I'll update the OP.
*Important note 1: I did this mod for a family member's treadmill. I've never actually used the treadmill before lol, so I'm unfamiliar with it, and don't know if any special features are not working. My family member says all functions operate as designed. If you have any issues, post them and we'll try to work through them.
**Important note 2: We don't have an iFit subscription, so I can't see if the premium content loads correctly or not. Without the subscription, it shows me premium content, but it's locked and inaccessible. I'd imagine it should work normally if you login. Let me know and I'll update the OP.
Download NordicUnchained
Instructions:
I understand not all Nordic owners are seasoned Android enthusiasts, so I try to make instructions as clear and simple as possible. If anything needs any clarification, let me know. If pictures are needed, I’ll make it happen.
First off, DO NOT enable Wi-Fi ANYWHERE until you are specifically told to.
***If you happen to have USB debugging enabled already and know your IP or can get it, you can start at step 8.*** Such as in the event I release mod updates, then you’ll be able to install them without needing a factory reset.
Factory reset the treadmill. On the x32i, the reset button is in the right side panel, about a couple inches below the auxiliary port. The reset button is a pinhole style reset button, and it does not stand out well. This button needs to be pushed while you turn on the treadmill to factory reset it. Super easy way of doing this alone is to push a toothpick into that pinhole until it clicks, and while holding it down use your big toe to turn on the power switch. System recovery will display in blue text if you did it correctly, and you can let go of the push button. The reset process takes about 10 minutes before you have any input.
Enable Privileged mode. When you get to the welcome screen, tap on welcome 10 times, count 7 Mississippi, then tap it in the same spot 10 more times. There will be a message at the bottom of the screen confirming privileged mode is enabled. If you already passed that screen, you can do the same tapping process on other screens in deadspace. You can now swipe up from the bottom of the screen and hit the Home button(center button)
Prevent iFit from ruining things. Go to Settings/Apps/eru app, then goto the bottom where it says “Draw over other apps” and ”Modify system settings” and DISABLE BOTH.
Unlock Developer options. Go to Settings/About tablet, and look for the build number. Tap on the build number 7 times. You will get a message at the bottom of the screen confirming Developer options unlocked.
Enable USB debugging. Go to Settings and scroll almost all the way down to Developer options and enable USB debugging.
Set up Wi-Fi in Android only. Pull down from the top to open the notification panel, then hold down the Wi-Fi symbol. Find your home network here and connect. BIG NOTE: The computer or laptop you are using to connect to the treadmill MUST be connected to the same exact network.
Obtain IP address. Go to Settings/About tablet/Status. The last line under IP is what you need. It should look similar to 192.168.4.113, but your numbers will be different. Write down YOUR IP ADDRESS number, exactly as it shows with the periods and all.
Getting tools ready. Download NordicUnchained.zip on your computer or laptop, then find it in your downloads folder. Right click NordicUnchained.zip and choose extract or extract all. Then go into the extracted folder. While you are in the folder, shift+right click somewhere in the deadspace of the folder and you should see the option to Open in Windows Terminal or Open in CMD. Either one of these works the same. If all you see is open in PowerShell, use it and type cmd and hit enter to bring up CMD. In the terminal, type adb connect, your written down IP address, followed by :5555 {Example: adb connect 192.168.4.113:5555}--Don’t use the brackets. If you did this correctly, the terminal should say connected.
Now the easy part. In the same terminal, type UNCHAINED and hit enter. The process will take about 3-4 minutes including the reboot.
Configuring Nova launcher. When the treadmill restarts, you will get a choice to use Nova launcher as your home screen. Choose Nova launcher-always. It will ask you to setup Nova, but choose to use defaults in the bottom left corner. On the home screen, swipe up from the bottom and open Explorer. Grant Explorer the needed permissions. In the upper right area of the app, you’ll see a storage tab, tap that, then tap the Download folder. Finally tap nova.novabackup and open it with Nova Launcher. When Nova launcher asks are you sure you want to restore the backup, say yes. The screen may black out and act weird for a minute, but it’s normal. Swipe up from the bottom and hit the home button. Welcome to your new Android desktop. I even added a fitting wallpaper in your downloads folder that you can set as your background. I couldn’t get it to stick with adb.
Getting iFit to work. Open the iFit app and grant it permissions as needed. When it has a popup asking for access to USB, check the use by default box and tap ok. You can finally setup Wi-Fi within the iFit app now. We are DONE!!!
Do not use another Netflix app, because this is the only one that will work with this machine. Any others will error due to the tablet not running Google Play Services. This is most important if you use Aptoide for apps, since it will immediately tell you that it’s out of date and urge you to update it.
Everyone, let me know what you think. And for possible future updates, what would you like to see? I toyed with adding Aptoide as a Play Store alternative, but it causes some app issues, so decided against it. I considered adding F-droid as well.
Good luck and ENJOY!!!
If anyone tests this and has iFit sub, let me know if the programs still have the automated incline/decline enabled. TYIA
durag5 said:
If anyone tests this and has iFit sub, let me know if the programs still have the automated incline/decline enabled. TYIA
Click to expand...
Click to collapse
I can say that I played with the elevation buttons on the side panel and the elevation changed like it would. When I went into iFit and did the free quick run, it automatically declined it back to flat elevation for the flat track I was running on.
Since mods, everything appears to be working as I believe it should. My warnings mostly stem from never having used the treadmill myself prior to modding it...I don't run lol.
That being said, my dad says it operates as designed, without subscription. It's his treadmill. It's the latest official unmodified iFit app, so I doubt anything would be an issue, just can't confirm on my own.
Thanks for the reply. I'm just not sure if the app designed for a phone would control the treadmill. Did you attempt to controll the incline/decline through the software and not the hardware?
I'll see if I can figure it out now.
durag5 said:
Thanks for the reply. I'm just not sure if the app designed for a phone would control the treadmill. Did you attempt to controll the incline/decline through the software and not the hardware?
Click to expand...
Click to collapse
I just went into the iFit app and did a short "run" in Las Ganques, France.(I stood on the side rails while the machine operated lol)
The elevation of the machine changes as the on-screen elevation changes!
Question, can someone else check that same run. It's very slideshow like, not video. I'm thinking it's designed that way, but I'm also on DSL in the woods.
Great work! Instructions were crystal clear and installation was a breeze.
Heads up - on my NordicTrack Commercial 2950, I received an unsupported device error when launching Netflix. I downloaded v. 8.13.0 build 10 40124 and it runs fine.
Not sure if this is useful but the following programs run without issue and I'm able to control the speed and incline as well:
Amazon Prime Video
Sling TV (will launch vertically and you will want to install and log in before you install rotation control otherwise the login fields get cut off)
Plex
YouTube
PokerStars (only while walking - good luck trying to not muck your hand while running)
Before I found your solution, I think I'd gone through the factory reset-reinstall process several times, only to find that ifit had pushed through another patch. I am grateful for your awesome work!
The 2nd user disable step of the script gives me a security exception:
Bash:
adb shell pm disable-user --user 0 com.ifit.launcher
Security exception: Shell cannot change component state for com.ifit.launcher/null to 3
I have no experience with android, does anyone know what this means? The other two user disable steps and app installations appear to work fine.
Now that you mention it, I did have that error pop up one time. I thought it was because I ran the batch twice, though. Honestly the only one that truly matters is com.ifit.eru since it's the only one that takes away privileged mode. The other iFit apps being disabled were purely debloat since everything worked proper without them. Did everything else work, though?
Not a programmer, but I believe the word null points to it being disabled already, perhaps by the system.
TLDR: No need to worry about that error as long as the rest of the batch worked.
Yep! everything worked fine, I was just worried that the `com.ifit.launcher` rDNS was somehow privileged and would be able to overwrite settings and lock me back out.
Thanks for posting the guide! It's pretty crazy that an expensive treadmill would have a giant screen on it like that and not allow you to use the android OS to it's fullest. Honestly the ability to install third party apps like Netflix is a huge selling point and the only reason I wanted this treadmill.
Thanks for the very detailed explanations. However, the issue that arises when I try this is that when I boot up iFit after the whole NOVA launcher bit, it is gets stuck on the loading screen with the logo fading in an out. I waited for a decent amount of time and it's still stuck on there. Before I did everything in your post, I was able to access privilege mode by finding the secret menu on iFit, disabling auto updates, factory resetting and doing the 10 taps, 7 seconds, 10 taps. I tried following your steps on my treadmill (EXP14i) after that but some of them I wasn't exactly able to replicate. Instead of the "eru" app, there was only the iFit Admin app, on which I disabled the options for “Draw over other apps” and ”Modify system settings”. When my treadmill resets after doing the thing with NordicUnchained in the windows PowerShell, it doesn't give me the option to use NOVA launcher as my home screen, so I instead press "use defaults" in the bottom left. Then when I go to open up Explorer, I doesn't prompt me to grant any privileges, and I can just go to downloads to restore the backup of NOVA launcher. Then when I open up iFit, I gets stuck on the loading screen forever. I'm not exactly familiar with how android os and all the programming involved works, I'm just good at following instructions. Please let me know where I might have gone wrong and what I can do to fix it! Console is on android version 9 btw.
Can you still get into it via adb? If so run *adb shell pm list packages* depending on your output, I could tell you some commands that might help.
The x32i is Android 7, but a lot of stuff should still work in 9. Send me your package list and I'll see if I can snuff out the issue.
Has anyone tried to to enable Developer mode/ADB, update to the lastest Android 9 version then run the .bat on PC which will restore the older iFIT without the pin? I believe ADB will still stay enabled even after loosing GodMode.
My Proform Pro 2000 is still on 8.0, don't want to update to 9 because I believe it will just jump to the lastest version.
NordicUnchained worked great on my Pro 2000, just have to swap netflix to an earlier version.
CVertigo1 said:
First off, mods, forgive me if I'm posting in the wrong spot. I generally have a device that goes into a specific forum, but I didn't find a treadmill forum lol, so general android was my best guess.
This mod is a no-root solution to prevent privileged mode from being disabled by iFit. It makes no changes to /system, so it is 100% reversible by doing a factory reset. This mod starts by disabling the factory iFit apps in the system, then installing the latest official iFit standalone app as a user app. Going this route still allows the new iFit app to interface correctly with the treadmill, but prevents it from overwriting privileged mode. All these instructions are written for Windows, but I believe it will work on other OS’s command line, so long as adb is already installed in that OS. If you are on Windows, you do not need to install adb, as it will run right out of this folder.
There are other apps included in this mod as well. Nova is a replacement launcher, essentially your new desktop. The included Netflix and Hulu apps are the correct versions for this build. Chromium browser is the open source build of Google Chrome, and it works great. The file manager is hard to access on the treadmill, so I added file explorer. If you download apps from the internet, you can install them by finding them with file explorer. Termux is a terminal emulator, for us nerds. Rotation_control will be used to properly orient the screen easily. All of the apps that are installed in this procedure are user apps, so they can be easily uninstalled if you don't want them.
The only model I have personally confirmed this works on is the Nordic X32i, but I'd imagine it could work on any Nordic iFit equipment that uses an Android 7.1 tablet and can enable USB debugging. If you try this on another piece of equipment, post if it works or not, and I'll update the OP.
*Important note 1: I did this mod for a family member's treadmill. I've never actually used the treadmill before lol, so I'm unfamiliar with it, and don't know if any special features are not working. My family member says all functions operate as designed. If you have any issues, post them and we'll try to work through them.
**Important note 2: We don't have an iFit subscription, so I can't see if the premium content loads correctly or not. Without the subscription, it shows me premium content, but it's locked and inaccessible. I'd imagine it should work normally if you login. Let me know and I'll update the OP.
Download NordicUnchained
Instructions:
I understand not all Nordic owners are seasoned Android enthusiasts, so I try to make instructions as clear and simple as possible. If anything needs any clarification, let me know. If pictures are needed, I’ll make it happen.
First off, DO NOT enable Wi-Fi ANYWHERE until you are specifically told to.
***If you happen to have USB debugging enabled already and know your IP or can get it, you can start at step 8.*** Such as in the event I release mod updates, then you’ll be able to install them without needing a factory reset.
Factory reset the treadmill. On the x32i, the reset button is in the right side panel, about a couple inches below the auxiliary port. The reset button is a pinhole style reset button, and it does not stand out well. This button needs to be pushed while you turn on the treadmill to factory reset it. Super easy way of doing this alone is to push a toothpick into that pinhole until it clicks, and while holding it down use your big toe to turn on the power switch. System recovery will display in blue text if you did it correctly, and you can let go of the push button. The reset process takes about 10 minutes before you have any input.
Enable Privileged mode. When you get to the welcome screen, tap on welcome 10 times, count 7 Mississippi, then tap it in the same spot 10 more times. There will be a message at the bottom of the screen confirming privileged mode is enabled. If you already passed that screen, you can do the same tapping process on other screens in deadspace. You can now swipe up from the bottom of the screen and hit the Home button(center button)
Prevent iFit from ruining things. Go to Settings/Apps/eru app, then goto the bottom where it says “Draw over other apps” and ”Modify system settings” and DISABLE BOTH.
Unlock Developer options. Go to Settings/About tablet, and look for the build number. Tap on the build number 7 times. You will get a message at the bottom of the screen confirming Developer options unlocked.
Enable USB debugging. Go to Settings and scroll almost all the way down to Developer options and enable USB debugging.
Set up Wi-Fi in Android only. Pull down from the top to open the notification panel, then hold down the Wi-Fi symbol. Find your home network here and connect. BIG NOTE: The computer or laptop you are using to connect to the treadmill MUST be connected to the same exact network.
Obtain IP address. Go to Settings/About tablet/Status. The last line under IP is what you need. It should look similar to 192.168.4.113, but your numbers will be different. Write down YOUR IP ADDRESS number, exactly as it shows with the periods and all.
Getting tools ready. Download NordicUnchained.zip on your computer or laptop, then find it in your downloads folder. Right click NordicUnchained.zip and choose extract or extract all. Then go into the extracted folder. While you are in the folder, shift+right click somewhere in the deadspace of the folder and you should see the option to Open in Windows Terminal or Open in CMD. Either one of these works the same. If all you see is open in PowerShell, use it and type cmd and hit enter to bring up CMD. In the terminal, type adb connect, your written down IP address, followed by :5555 {Example: adb connect 192.168.4.113:5555}--Don’t use the brackets. If you did this correctly, the terminal should say connected.
Now the easy part. In the same terminal, type UNCHAINED and hit enter. The process will take about 3-4 minutes including the reboot.
Configuring Nova launcher. When the treadmill restarts, you will get a choice to use Nova launcher as your home screen. Choose Nova launcher-always. It will ask you to setup Nova, but choose to use defaults in the bottom left corner. On the home screen, swipe up from the bottom and open Explorer. Grant Explorer the needed permissions. In the upper right area of the app, you’ll see a storage tab, tap that, then tap the Download folder. Finally tap nova.novabackup and open it with Nova Launcher. When Nova launcher asks are you sure you want to restore the backup, say yes. The screen may black out and act weird for a minute, but it’s normal. Swipe up from the bottom and hit the home button. Welcome to your new Android desktop. I even added a fitting wallpaper in your downloads folder that you can set as your background. I couldn’t get it to stick with adb.
Getting iFit to work. Open the iFit app and grant it permissions as needed. When it has a popup asking for access to USB, check the use by default box and tap ok. You can finally setup Wi-Fi within the iFit app now. We are DONE!!!
Do not use another Netflix app, because this is the only one that will work with this machine. Any others will error due to the tablet not running Google Play Services. This is most important if you use Aptoide for apps, since it will immediately tell you that it’s out of date and urge you to update it.
Everyone, let me know what you think. And for possible future updates, what would you like to see? I toyed with adding Aptoide as a Play Store alternative, but it causes some app issues, so decided against it. I considered adding F-droid as well.
Good luck and ENJOY!!!
Click to expand...
Click to collapse
I just did this on the latest 1750 treadmill. Always great until step 11. The ifit logo just keeps flashing. I've cleared cache, rebooted.. help?!? It gives me permissions for photos and location and then just flashes.
Edit: uninstall ifit app. Go to ifnullthen and download app from there. Works great
CVertigo1 said:
First off, mods, forgive me if I'm posting in the wrong spot. I generally have a device that goes into a specific forum, but I didn't find a treadmill forum lol, so general android was my best guess.
This mod is a no-root solution to prevent privileged mode from being disabled by iFit. It makes no changes to /system, so it is 100% reversible by doing a factory reset. This mod starts by disabling the factory iFit apps in the system, then installing the latest official iFit standalone app as a user app. Going this route still allows the new iFit app to interface correctly with the treadmill, but prevents it from overwriting privileged mode. All these instructions are written for Windows, but I believe it will work on other OS’s command line, so long as adb is already installed in that OS. If you are on Windows, you do not need to install adb, as it will run right out of this folder.
There are other apps included in this mod as well. Nova is a replacement launcher, essentially your new desktop. The included Netflix and Hulu apps are the correct versions for this build. Chromium browser is the open source build of Google Chrome, and it works great. The file manager is hard to access on the treadmill, so I added file explorer. If you download apps from the internet, you can install them by finding them with file explorer. Termux is a terminal emulator, for us nerds. Rotation_control will be used to properly orient the screen easily. All of the apps that are installed in this procedure are user apps, so they can be easily uninstalled if you don't want them.
The only model I have personally confirmed this works on is the Nordic X32i, but I'd imagine it could work on any Nordic iFit equipment that uses an Android 7.1 tablet and can enable USB debugging. If you try this on another piece of equipment, post if it works or not, and I'll update the OP.
*Important note 1: I did this mod for a family member's treadmill. I've never actually used the treadmill before lol, so I'm unfamiliar with it, and don't know if any special features are not working. My family member says all functions operate as designed. If you have any issues, post them and we'll try to work through them.
**Important note 2: We don't have an iFit subscription, so I can't see if the premium content loads correctly or not. Without the subscription, it shows me premium content, but it's locked and inaccessible. I'd imagine it should work normally if you login. Let me know and I'll update the OP.
Download NordicUnchained
Instructions:
I understand not all Nordic owners are seasoned Android enthusiasts, so I try to make instructions as clear and simple as possible. If anything needs any clarification, let me know. If pictures are needed, I’ll make it happen.
First off, DO NOT enable Wi-Fi ANYWHERE until you are specifically told to.
***If you happen to have USB debugging enabled already and know your IP or can get it, you can start at step 8.*** Such as in the event I release mod updates, then you’ll be able to install them without needing a factory reset.
Factory reset the treadmill. On the x32i, the reset button is in the right side panel, about a couple inches below the auxiliary port. The reset button is a pinhole style reset button, and it does not stand out well. This button needs to be pushed while you turn on the treadmill to factory reset it. Super easy way of doing this alone is to push a toothpick into that pinhole until it clicks, and while holding it down use your big toe to turn on the power switch. System recovery will display in blue text if you did it correctly, and you can let go of the push button. The reset process takes about 10 minutes before you have any input.
Enable Privileged mode. When you get to the welcome screen, tap on welcome 10 times, count 7 Mississippi, then tap it in the same spot 10 more times. There will be a message at the bottom of the screen confirming privileged mode is enabled. If you already passed that screen, you can do the same tapping process on other screens in deadspace. You can now swipe up from the bottom of the screen and hit the Home button(center button)
Prevent iFit from ruining things. Go to Settings/Apps/eru app, then goto the bottom where it says “Draw over other apps” and ”Modify system settings” and DISABLE BOTH.
Unlock Developer options. Go to Settings/About tablet, and look for the build number. Tap on the build number 7 times. You will get a message at the bottom of the screen confirming Developer options unlocked.
Enable USB debugging. Go to Settings and scroll almost all the way down to Developer options and enable USB debugging.
Set up Wi-Fi in Android only. Pull down from the top to open the notification panel, then hold down the Wi-Fi symbol. Find your home network here and connect. BIG NOTE: The computer or laptop you are using to connect to the treadmill MUST be connected to the same exact network.
Obtain IP address. Go to Settings/About tablet/Status. The last line under IP is what you need. It should look similar to 192.168.4.113, but your numbers will be different. Write down YOUR IP ADDRESS number, exactly as it shows with the periods and all.
Getting tools ready. Download NordicUnchained.zip on your computer or laptop, then find it in your downloads folder. Right click NordicUnchained.zip and choose extract or extract all. Then go into the extracted folder. While you are in the folder, shift+right click somewhere in the deadspace of the folder and you should see the option to Open in Windows Terminal or Open in CMD. Either one of these works the same. If all you see is open in PowerShell, use it and type cmd and hit enter to bring up CMD. In the terminal, type adb connect, your written down IP address, followed by :5555 {Example: adb connect 192.168.4.113:5555}--Don’t use the brackets. If you did this correctly, the terminal should say connected.
Now the easy part. In the same terminal, type UNCHAINED and hit enter. The process will take about 3-4 minutes including the reboot.
Configuring Nova launcher. When the treadmill restarts, you will get a choice to use Nova launcher as your home screen. Choose Nova launcher-always. It will ask you to setup Nova, but choose to use defaults in the bottom left corner. On the home screen, swipe up from the bottom and open Explorer. Grant Explorer the needed permissions. In the upper right area of the app, you’ll see a storage tab, tap that, then tap the Download folder. Finally tap nova.novabackup and open it with Nova Launcher. When Nova launcher asks are you sure you want to restore the backup, say yes. The screen may black out and act weird for a minute, but it’s normal. Swipe up from the bottom and hit the home button. Welcome to your new Android desktop. I even added a fitting wallpaper in your downloads folder that you can set as your background. I couldn’t get it to stick with adb.
Getting iFit to work. Open the iFit app and grant it permissions as needed. When it has a popup asking for access to USB, check the use by default box and tap ok. You can finally setup Wi-Fi within the iFit app now. We are DONE!!!
Do not use another Netflix app, because this is the only one that will work with this machine. Any others will error due to the tablet not running Google Play Services. This is most important if you use Aptoide for apps, since it will immediately tell you that it’s out of date and urge you to update it.
Everyone, let me know what you think. And for possible future updates, what would you like to see? I toyed with adding Aptoide as a Play Store alternative, but it causes some app issues, so decided against it. I considered adding F-droid as well.
Good luck and ENJOY!!!
Click to expand...
Click to collapse
Your instructions worked to a t foremost so thank you. Big issue followed though, my Ifit is now disabled so not only does the app not work, the treadmill does not function. I looked into the settings at the actual program at it says 'disabled'. I looked at what the command program file says it did (sorry newbie) and it appears its forcing Ifit to disable. Any fixes? I've attached a picture, fyi I tried resubmitting the information to the unit that's why it shows twice in the command program.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fyi this is a brand new machine, 2022 Nordictrack Commercial 2450
BurtonSnol3order said:
I just did this on the latest 1750 treadmill. Always great until step 11. The ifit logo just keeps flashing. I've cleared cache, rebooted.. help?!? It gives me permissions for photos and location and then just flashes.
Edit: uninstall ifit app. Go to ifnullthen and download app from there. Works great
Click to expand...
Click to collapse
Curious if you've had time to test it out. I first had zero issues at all but lately, I'll start up ifit then switch to Netflix, Sling, etc,, and all is good until I try to switch back over to ifit. It causes the screen to freeze. I can manually stop the treadmill using the controls below the display, but I then must power cycle the treadmill (2950).
I'm going to try using the ifnullthen and hopefully that will resolve the freezing issue. But please let me know how it's been working for you!
brad.isa said:
Curious if you've had time to test it out. I first had zero issues at all but lately, I'll start up ifit then switch to Netflix, Sling, etc,, and all is good until I try to switch back over to ifit. It causes the screen to freeze. I can manually stop the treadmill using the controls below the display, but I then must power cycle the treadmill (2950).
I'm going to try using the ifnullthen and hopefully that will resolve the freezing issue. But please let me know how it's been working for you!
Click to expand...
Click to collapse
All is well with the ifnullthen version of the ifit app. I do have a permission request for some "generic adapter" when it loads up the first time, but I can start a program, switch to netflix or plex, switch back... all is well.
Most of the time I start a workout, switch to plex and just use the tactile buttons to change speed. When I am done, I'll switch back to ifit to check out time and distance.
https://ufile.io/290t3xp6 is the link I used
BurtonSnol3order said:
All is well with the ifnullthen version of the ifit app. I do have a permission request for some "generic adapter" when it loads up the first time, but I can start a program, switch to netflix or plex, switch back... all is well.
Most of the time I start a workout, switch to plex and just use the tactile buttons to change speed. When I am done, I'll switch back to ifit to check out time and distance.
https://ufile.io/290t3xp6 is the link I used
Click to expand...
Click to collapse
I installed the ifnullthen version and all is working perfectly. The SlingTV app does a nice job with their overlay feature so I can use the ifit timer for intervals/HIIT while still watching TV, albeit in a smaller window. Now, if only the ifit app could have that overlay feature so it's a smaller window over other streaming apps like Prime, Netflix, Plex, etc.
If you happen to find out if anyone add this overlay function to the ifit app, please let me know!
Thank you so much for this.
Everything seems to have worked well but i did get one error while running your script
Disabling iFit system apps
Package com.ifit.eru new state: disabled-user
One of three disabled
Error: java.lang.SecurityException: Shell cannot change component state for com.ifit.launcher/null to 3
Two of three disabled
Package com.ifit.standalone new state: disabled-user
All iFit system apps disabled
Copying launcher settings and wallpaper
nova.novabackup: 1 file pushed. 4.7 MB/s (138629 bytes in 0.028s)
Wallpaper.jpg: 1 file pushed. 9.2 MB/s (1692718 bytes in 0.175s)
Installing needed apps
Success
App 1 of 8 installed
Success
App 2 of 8 installed
Success
App 3 of 8 installed
Success
App 4 of 8 installed
Success
App 5 of 8 installed
Success
App 6 of 8 installed
Success
App 7 of 8 installed
Success
App 8 of 8 installed
setting Nova Launcher as default launcher
Done
Nordictrack 1750 for reference.
I believe this is the one that has caused the error
package:/system/priv-app/com.ifit.launcher-1.0.12/com.ifit.launcher-1.0.12.apk=com.ifit.launcher
With that being said, it still seems to be disabled
J1002:/ $ pm list packages -d
package:com.ifit.eru
package:com.ifit.launcher
package:com.ifit.standalone
Spoiler: For your reference here is everything that is installed on the Treadmill
adb shell sh -c 'cmd package list packages -f'
package:/system/priv-app/CtsShimPrivPrebuilt/CtsShimPrivPrebuilt.apk=com.android.cts.priv.ctsshim
package:/system/priv-app/TelephonyProvider/TelephonyProvider.apk=com.android.providers.telephony
package:/data/app/com.ifit.wolf-1/base.apk=com.ifit.wolf
package:/system/vendor/app/Camera/Camera.apk=com.mediatek.camera
package:/system/vendor/app/Dongle/Dongle.apk=com.mediatek.dongle
package:/system/priv-app/MediaProvider/MediaProvider.apk=com.android.providers.media
package:/vendor/plugin/FwkPlugin/FwkPlugin.apk=com.mediatek.fwk.plugin
package:/data/app/org.chromium.chrome.stable-1/base.apk=org.chromium.chrome.stable
package:/system/priv-app/WallpaperCropper/WallpaperCropper.apk=com.android.wallpapercropper
package:/data/app/com.teslacoilsw.launcher-1/base.apk=com.teslacoilsw.launcher
package:/system/vendor/app/SchedulePowerOnOff/SchedulePowerOnOff.apk=com.mediatek.schpwronoff
package:/system/priv-app/com.ifit.eru-1.2.0.137/com.ifit.eru-1.2.0.137.apk=com.ifit.eru
package:/data/app/org.crape.rotationcontrol-1/base.apk=org.crape.rotationcontrol
package:/system/priv-app/DocumentsUI/DocumentsUI.apk=com.android.documentsui
package:/system/priv-app/ExternalStorageProvider/ExternalStorageProvider.apk=com.android.externalstorage
package:/system/vendor/app/YGPS/YGPS.apk=com.mediatek.ygps
package:/system/priv-app/SimProcessor/SimProcessor.apk=com.mediatek.simprocessor
package:/system/app/HTMLViewer/HTMLViewer.apk=com.android.htmlviewer
package:/system/priv-app/MmsService/MmsService.apk=com.android.mms.service
package:/system/priv-app/DownloadProvider/DownloadProvider.apk=com.android.providers.downloads
package:/system/vendor/app/EngineerMode/EngineerMode.apk=com.mediatek.engineermode
package:/data/app/com.hulu.plus-1/base.apk=com.hulu.plus
package:/system/vendor/app/MtkBrowser/MtkBrowser.apk=com.android.browser
package:/system/app/ApplicationsProvider/ApplicationsProvider.apk=com.android.providers.applications
package:/system/priv-app/DefaultContainerService/DefaultContainerService.apk=com.android.defcontainer
package:/system/app/DownloadProviderUi/DownloadProviderUi.apk=com.android.providers.downloads.ui
package:/system/app/PacProcessor/PacProcessor.apk=com.android.pacprocessor
package:/data/app/com.speedsoftware.explorer-1/base.apk=com.speedsoftware.explorer
package:/system/app/CertInstaller/CertInstaller.apk=com.android.certinstaller
package:/system/priv-app/CarrierConfig/CarrierConfig.apk=com.android.carrierconfig
package:/system/framework/framework-res.apk=android
package:/vendor/priv-app/CDS_INFO/CDS_INFO.apk=com.mediatek.connectivity
package:/system/priv-app/com.ifit.launcher-1.0.12/com.ifit.launcher-1.0.12.apk=com.ifit.launcher
package:/system/app/EasterEgg/EasterEgg.apk=com.android.egg
package:/system/priv-app/MtpDocumentsProvider/MtpDocumentsProvider.apk=com.android.mtp
package:/system/priv-app/Launcher3/Launcher3.apk=com.android.launcher3
package:/system/priv-app/BackupRestoreConfirmation/BackupRestoreConfirmation.apk=com.android.backupconfirm
package:/system/vendor/app/BtTool/BtTool.apk=com.mediatek.bluetooth.dtt
package:/system/priv-app/Provision/Provision.apk=com.android.provision
package:/system/priv-app/StatementService/StatementService.apk=com.android.statementservice
package:/system/vendor/app/DrmProvider/DrmProvider.apk=com.mediatek.providers.drm
package:/system/priv-app/SettingsProvider/SettingsProvider.apk=com.android.providers.settings
package:/system/priv-app/SharedStorageBackup/SharedStorageBackup.apk=com.android.sharedstoragebackup
package:/system/vendor/app/BatteryWarning/BatteryWarning.apk=com.mediatek.batterywarning
package:/system/app/PrintSpooler/PrintSpooler.apk=com.android.printspooler
package:/system/app/BasicDreams/BasicDreams.apk=com.android.dreams.basic
package:/system/app/webview/webview.apk=com.android.webview
package:/system/priv-app/InputDevices/InputDevices.apk=com.android.inputdevices
package:/vendor/framework/mediatek-res/mediatek-res.apk=com.mediatek
package:/system/app/MusicFX/MusicFX.apk=com.android.musicfx
package:/system/app/MalataEngineerMode/MalataEngineerMode.apk=com.malata.engineermode
package:/system/app/TangoC_prov1/TangoC_prov1.apk=com.pixcir.tangoc.pro
package:/system/app/ExtShared/ExtShared.apk=android.ext.shared
package:/system/priv-app/OneTimeInitializer/OneTimeInitializer.apk=com.android.onetimeinitializer
package:/system/priv-app/Telecom/Telecom.apk=com.android.server.telecom
package:/system/app/KeyChain/KeyChain.apk=com.android.keychain
package:/system/app/PrintRecommendationService/PrintRecommendationService.apk=com.android.printservice.recommendation
package:/system/app/Gallery2/Gallery2.apk=com.android.gallery3d
package:/system/priv-app/ExtServices/ExtServices.apk=android.ext.services
package:/system/priv-app/CallLogBackup/CallLogBackup.apk=com.android.calllogbackup
package:/system/priv-app/PackageInstaller/PackageInstaller.apk=com.android.packageinstaller
package:/system/app/PicoTts/PicoTts.apk=com.svox.pico
package:/system/priv-app/ProxyHandler/ProxyHandler.apk=com.android.proxyhandler
package:/data/app/com.netflix.mediaclient-1/base.apk=com.netflix.mediaclient
package:/system/app/LatinIME/LatinIME.apk=com.android.inputmethod.latin
package:/system/priv-app/ManagedProvisioning/ManagedProvisioning.apk=com.android.managedprovisioning
package:/system/vendor/app/CalendarImporter/CalendarImporter.apk=com.mediatek.calendarimporter
package:/system/vendor/app/AtciService/AtciService.apk=com.mediatek.atci.service
package:/system/vendor/app/MTKThermalManager/MTKThermalManager.apk=com.mediatek.thermalmanager
package:/system/vendor/app/TeledongleDemo/TeledongleDemo.apk=com.mediatek.teledongledemo
package:/system/vendor/app/SimRecoveryTestTool/SimRecoveryTestTool.apk=com.mtk.telephony
package:/system/app/LiveWallpapersPicker/LiveWallpapersPicker.apk=com.android.wallpaper.livepicker
package:/data/app/com.ifit.standalone-1/base.apk=com.ifit.standalone
package:/system/app/BookmarkProvider/BookmarkProvider.apk=com.android.bookmarkprovider
package:/system/priv-app/Settings/Settings.apk=com.android.settings
package:/data/app/com.termux-1/base.apk=com.termux
package:/system/app/ExactCalculator/ExactCalculator.apk=com.android.calculator2
package:/system/app/CtsShimPrebuilt/CtsShimPrebuilt.apk=com.android.cts.ctsshim
package:/system/priv-app/VpnDialogs/VpnDialogs.apk=com.android.vpndialogs
package:/system/priv-app/TeleService/TeleService.apk=com.android.phone
package:/system/priv-app/Shell/Shell.apk=com.android.shell
package:/system/app/WallpaperBackup/WallpaperBackup.apk=com.android.wallpaperbackup
package:/system/priv-app/BlockedNumberProvider/BlockedNumberProvider.apk=com.android.providers.blockednumber
package:/system/app/UserDictionaryProvider/UserDictionaryProvider.apk=com.android.providers.userdictionary
package:/system/priv-app/EmergencyInfo/EmergencyInfo.apk=com.android.emergency
package:/system/priv-app/FusedLocation/FusedLocation.apk=com.android.location.fused
package:/system/app/DeskClock/DeskClock.apk=com.android.deskclock
package:/system/priv-app/SystemUI/SystemUI.apk=com.android.systemui
package:/system/vendor/app/Exchange2/Exchange2.apk=com.android.exchange
package:/system/app/BluetoothMidiService/BluetoothMidiService.apk=com.android.bluetoothmidiservice
package:/system/vendor/app/MTKLogger/MTKLogger.apk=com.mediatek.mtklogger
package:/system/vendor/app/SensorHub/SensorHub.apk=com.mediatek.sensorhub.ui
package:/system/app/Bluetooth/Bluetooth.apk=com.android.bluetooth
package:/system/priv-app/ContactsProvider/ContactsProvider.apk=com.android.providers.contacts
package:/system/app/CaptivePortalLogin/CaptivePortalLogin.apk=com.android.captiveportallogin
[/ISPOILER]
Thanks again