Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Is there any mods I can install on my phone, s off, rooted. Or do I need to flash certain ROM inorder to install mods like beats.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
malybru said:
Hi,
The thing is to flash mods using the same base as your ROM.
If you check my sig , I have battery mods for ARHD base 2.3.4 and 2.3.5
Check with your ROM'S dev,to see which base you are using,and then flash the appropriate mod.
ALWAYS MAKE A NANDROID BACKUP BEFORE YOU INSTALL A MOD
For beats I installed THIS MOD ,because I am on base 2.3.5 using Sense 3.5
Or you could install ARDH 3.6.3 XE which contains beats anyway.
Click to expand...
Click to collapse
I'm still on stock tmobile us rom, I just came from arhd with no luck so I restored my phone to factory stock then s off and rooted.
Sent from my HTC Sensation 4G using xda premium
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
02CWRX said:
You can install anything you want, you just have to know what it is you want to do. Lets say you want to have beats audio (using the previous posters example). You know you have a stock ROM, version 2.3.4 most likely, so just find a beats audio only mod for 2.3.4 bases running Sense 3.0.
Or, as the previous poser says, you can install a whole ROM that already includes it. ARHD basically simulates a Sensation XE by removing the under-clocking on the CPU thats there stock bringing it up to 1.5 Ghz, adding beats audio, and overall just smoothing out the ROM. It looks the same as the stock ROM, it just works better.
The best thing to do is just make a backup of how it is now through recovery, then try stuff out and see what you like. You can always restore your backup and it will be right back to how it was before you did anything.
~T.J.
EDIT: Saw you came from ARHD. Sorry to hear about the bad luck. But yes, you can install mods without a full ROM.
Click to expand...
Click to collapse
Yeah I did tried 3 of the most recent arhd Rom, it is smooth and fast but has too many glitches on my phone. I tried installing the recommended radio it does fixed my signal issue, but after 3 days of using my phone keeps goin on a black screen when somebody calls me or text me so I decided to revert to stock
Sent from my HTC Sensation 4G using xda premium
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Interesting. Did you try turning the CPU back down to 1.2 GHz? I have ran 3.6.1 and only had one reboot before I switched to the beta kernel, never had any issues with 3.6.2 which came with the same kernel I upgraded to with 3.6.1, but I switched to bricked 0.91 kernel and its even better. Tried 3.6.3 and had a bunch of FC problems and issues so I restored back to 3.6.2.
Basically they all have worked well for me, but I've read of some people needing to stay at 1.2 GHz because of problems you have described.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I haven't tried restoring to 1.2ghz , I just restored my phone back to stock I got tired of trying all the versions and seems all of the versions I flashed had issues on my phone, don't get me wrong but I do love the speed and smoothness of arhd its just those fcs, unstable signal and not to mention the black screen issue. But like you said I haven't tried using different kernel I just used the one that came with the Rom and the other faux kernel that one of xda member suggested the beta 10. I even tried the insertcoin 3.3.9 and same issue with signal. I'm on tmobile carrier I don't know if that causes the signal issue with most of the Rom I flashed.
Sent from my HTC Sensation 4G using xda premium
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
02CWRX said:
Well, I'm on T-Mobile also and have had no issues, thats strange. Did you flash the recommended radio also? Maybe you need to try a different one if so.
I really like the Bricked kernel, it runs faster/smoother and the battery life is better than the Faux kernels I used - at least what I've seen so far. I run Sense 3.0 so Im limited to Bricked 0.91, but its still plenty good from what I've seen. He is developing more for Sense 3.5 kernels at this point I think.
Anyway, if it was me, I would try one of the ARHD ROMs with a bricked kernel (the kernel can also affect your reception I believe). If you still have issues, try clocking it back to 1.2 Ghz. I too ran IC for a little while, but finally just settled back to ARHD for a few reasons.
~T.J.
Click to expand...
Click to collapse
What arhd version you using and kerne so maybe I can try and use itl? I believe mike suggested to.flash it with the radio 10.58 which I did and it made my signal stable but few fcs and blackscreen so I reverted back to stock.
Sent from my HTC Sensation 4G using xda premium
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
I'll give 3.6.2 a try and the kernel you said and hope it works good now. Thanks. Let me know if the 3.6.4 works flawless. Thanks
Sent from my HTC Sensation 4G using xda premium
02CWRX said:
Currently running ARHD 3.6.2 with bricked 0.91 kernel at 1.5 GHz and the mods in my sig with whatever the recommended radio is in the ARHD thread. I have no issues and use it quite a bit every day. I might give 3.6.4 a shot though.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
jhobert said:
Any chance you could share the link for the bricked kernel 0.91 that u used. Thanks.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Thanks so much, you've been so helpful with me and I do appreciate it.
Sent from my HTC Sensation 4G using xda premium
malybru said:
Hi,
I've just switched my son's Sensation to a 3.6.2 + 0.9.1 bricked kernel.
He 's very happy with it.
You'll find it HERE
Click to expand...
Click to collapse
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
Hi I tried 3.6.2 with the bricked kernel that you said and also used the recommended radio 10.58 but I'm still having signal issues, signal still unstable constantly the bars goes up and down. Any idea how to fix the issue. Yha.ka again
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
malybru said:
Hi,
You really are having no luck...
Can I ask:
What was your signal like when you first got your phone out-of-the-box?
Click to expand...
Click to collapse
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I'm always either 3 to full bars, I barely get 2. Even when I restore my phone to stock using the stock RUU signal is good. I'm on tmobile us carrier I don't know I'd that matters on my case
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
malybru said:
Hi,
Have you tried a custom ROM with the original radio?
I know it won't be matched,but sometimes it's a needs must situation.
Use the radio that will give you the BEST signal.
It might just be that it's the only one that will work properly in YOUR area.
Click to expand...
Click to collapse
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
jhobert said:
I did tried the stock radio at first but signal goes from 2 bars to no signal so I decided to use the radio that's been suggested by mike for his Rom.
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
Hi,
So,what combination of ROM and radio was the best for signal?
And with your current set-up,do you ALWAYS have bad signals?
Or does it vary from area to area?
Hi,
I have this wierd problem with my sensation. I found out that if I have my camera on and it falls a sleep it won't unlock any more. No ring nothing, buttons glow but a solid black screen. The only way out is a battery pull.
It's with photo camera and video camera mode. no other apps suffer fom this.
I've tried other roms but nothing. I currently run ARHD 3.6.7
I found out on accident but it is realy annoying me now
Any of u with the same problem or ideas?
Same problem with the ARHD 4.1.7
This is a known issue with faux's kernels. (included in ARHD)
Don't let the phone go to sleep while running camera or install an app that keeps the screen on, while you use the camera.
Sent from my HTC Sensation Z710e using xda premium
I'm quite new to kernels but can't I just install a other custom kernel? Don't really know if ARHD works with other kernels out there...
You can try every kernel you want. Just make sure to wipe dalvik and cache before flashing.
Sent from my HTC Sensation Z710e using xda premium
Thanks, just flashed bricked kernel and problem solved. And mutch faster
hy my phone rendomly freeze after few minutes of working of it and then i must restart it , i dont know why it is happening, i am using vipers rom, but i try ordroid, but nothing changed, also I tryed diffrent kernel, but still nothing, so can anyone help me ?
Any recent radio change? What firmware are you on?
All in all, I think it would be best to backup, than run a marching RUU. If that one still fails, it might indicate a hardware issue.
Sent from my HTC Sensation XE with Beats Audio using xda premium
I didnt change radio ever, here is information
are you using the right kernels for the sense your using
What do you keep your CPU at?
Sent from my HTC Sensation 4G
Dont know, which kernel could you recomend me for ordroid 9 or vipers?
reflash the firmware and see 3.33 firmware
rinma50 said:
Dont know, which kernel could you recomend me for ordroid 9 or vipers?
Click to expand...
Click to collapse
Well there's 2 different kinds there's for 4.0 and 3.6 make sure your using the right one for the sense your on also if you are using the right one you can have your cpu clocked to high that causes random reboots
Sent from my HTC Sensation 4G
I have a strange problem. My touchscreen won't work with certain roms or kernels. Viper is one of them. After installing the rom i have to flash bricked kernel to make the touchscreen work. What might be the problem? After searching found some people with the same problem. But instead of finding a solution they kept using working kernels.
My wife's phone has this problem but only with viper.
She was already running viper (1.5.2 I think) when the screen just stopped responding one day (it was fine in recovery though).
Since then, its fine with any other Rom we've tried, but every time we try to flash a viper Rom, the screen doesn't work straight away.
Personally I think whatever the problem is is caused by viper, which is a shame cos its a damn fine Rom!!!
Sent from my HTC Sensation XE with Beats Audio Z715e
Same thing here. On recovery it works just fine. Besides Viper rom I've had the same problem with the stock rom and maybe few other roms that I don't remember. Also got the bricked kernel tip from your post.
We've gone back to sense 3.6 and loving it to be honest. Using elegancia bliss 3.8.0 at the minute but will be flashing darkforest 7.3.0 as soon as it is released
Sent from my HTC Sensation XE with Beats Audio Z715e