Database Info

Rogers HTC Dream - froyo update

Question to those who have updating their Dream from Rogers, was it at all slow or where their noticeable improvements?
I have one at my disposal but running stock OS (1.5/1.6 i assume). Anyone have a nice and easy to follow tutorial to update this phone without hassles? Also does updating android OS require rooting the device?
Thanks in advance.

Bloodyskullz said:
Question to those who have updating their Dream from Rogers, was it at all slow or where their noticeable improvements?
I have one at my disposal but running stock OS (1.5/1.6 i assume). Anyone have a nice and easy to follow tutorial to update this phone without hassles? Also does updating android OS require rooting the device?
Thanks in advance.
Click to expand...
Click to collapse
try this:
http://theunlockr.com/category/howto/android_how_tos/htc-g1-dream-how-tos/
Follow instructions. This seems to me to be the easiest guide. Be careful of the Rogers/T-Mobile thing. Seems there are different radio's and such. I don't know anything about Rogers. As far as Roms, I use HTCclay's Superfly TCBY. Lot of memory left on phone. Just try a few to see which you like. Good Luck.
By the way, you do have to be rooted. The guide will walk you through it.

crz6662 said:
try this:
http://theunlockr.com/category/howto/android_how_tos/htc-g1-dream-how-tos/
Follow instructions. This seems to me to be the easiest guide. Be careful of the Rogers/T-Mobile thing. Seems there are different radio's and such. I don't know anything about Rogers. As far as Roms, I use HTCclay's Superfly TCBY. Lot of memory left on phone. Just try a few to see which you like. Good Luck.
By the way, you do have to be rooted. The guide will walk you through it.
Click to expand...
Click to collapse
I would say to try the ROM in my sig (the stock ROM)
works for g1 and 32B Magic

he is going to need the EBI1 kernel to go with the rom.

Ok I am reviving this thread because I want to make sure I am following the right steps in doing so. Don't want to mess this up.
Successfully rooted the phone following video I found in the second post of this thread. Can't link you to it because I am still a new member =S! I checked the radio version of the phone and it is 3.22.20.17. Which ROM is recommended?As I said, I just want to get rid of this terrible stock rom from rogers and put froyo (which in turn also allows me to get touch screen keyboard activated) on here.
Thanks in advance.

With that radio you will need to flash ebi1 kernels after you flash the roms.
I completely forgot that Rogers blocked the virtual keyboard with their firmware. That's such bull****.
Sent from my HTC Hero using XDA App

asb123 said:
With that radio you will need to flash ebi1 kernels after you flash the roms.
Click to expand...
Click to collapse
Now you have more information in the link in your sig. Question: Can you re up the RS link you have there? Also, rooting the phone just means that you have the app called Superuser?
Now I get quite lost the moment you start explaining the options HTC Dream users have. Is there a recommended ROM to download for this phone considering its specs?
I completely forgot that Rogers blocked the virtual keyboard with their firmware. That's such bull****.
Click to expand...
Click to collapse
Yes it is sad that rogers has done this. Do whatever they can to screw the consumers over. Just found out it is 1.5.

Any help on this?

Ok still lost on trying to do this and want to follow the set up from cyanogen but its really complicated. I don't want to make a backup of contacts and stuff because it wasn't originally my phone.
Do I still need the amon_ra's recovery?

Bloodyskullz said:
Ok still lost on trying to do this and want to follow the set up from cyanogen but its really complicated. I don't want to make a backup of contacts and stuff because it wasn't originally my phone.
Do I still need the amon_ra's recovery?
Click to expand...
Click to collapse
Think of what you need to do:
1) Obtain root access so that you can flash a new recovery
2) Replace recovery so that you can flash new SPL
3) Flash new SPL so that you can be more compatible with roms / kernels
4) Flash a new rom (IE/ Cyanogenmod 6), and a compatible EBI1 kernel (for instance, Brian Crook's ones on the Cyanogenmod website)
Without getting into huge detail, you do it in this order to prevent your device from being unable to boot / recover.

You can flash the new RADIO and SPL from here: http://forum.xda-developers.com/showthread.php?goto=newpost&t=831139
Along with that, you use the appropriate supported +14MB EBI0 kernel.
More RAM is good

Well that makes sense.
Now I am following the Cyanogen wiki link (can't post there) and it says to launch flash rec but I can't understand from where I have to do this. Anyone care to help? And how does the Andriod SDK help?

Bloodyskullz said:
Well that makes sense.
Now I am following the Cyanogen wiki link (can't post there) and it says to launch flash rec but I can't understand from where I have to do this. Anyone care to help? And how does the Andriod SDK help?
Click to expand...
Click to collapse
Andriod sdk has the adb component needed to initiate commands to your device from your computer. then you need the android windows usb drivers.after installing sdk to see if you have connection with your device, open console on your computer start>run>type cmd and hit enter at the prompt type adb you should get several lines back kind of an options menu. at next prompt type adb devices. if your device is recognized you will get back:
device XXXXXXXX (this will be an actual number).
if you dont get any devices back with your phone attached to usb then you probably need the driver. just google it.
as for flashrec I dont believe I used this. I used exploid to gain root and install 1.33.2005 spl

Where do I get the android driver for windows (7 64bit specifically)? Adb command aint working in my cmd.
So what do I do about flashrec? Man updating this thing is driving me nuts. So many unexpected curves.

I also have Windows 7 64bit and I didn't need a driver it just works for me. Please tell us exactly what you are typing in and what output you are getting. You could also try the instruction to install the usb driver here:
http://developer.android.com/sdk/win-usb.html
What is your build number in settings? If it is 1.89.631.1 you are following the wrong guide. (see the top of that guide)

beav_35 said:
I also have Windows 7 64bit and I didn't need a driver it just works for me. Please tell us exactly what you are typing in and what output you are getting. You could also try the instruction to install the usb driver here:
http://developer.android.com/sdk/win-usb.html
What is your build number in settings? If it is 1.89.631.1 you are following the wrong guide. (see the top of that guide)
Click to expand...
Click to collapse
When I type in ADB command it just states that the command is not recognized (even when SDK is open).
Build number 1.85.631.5.
Now when I turn on phone it accepts it after I plug it into computer. I can mount sd card to copy files without issue.
Do I need another tutorial (preferably video since its easier for me but text is just fine)?

Bloodyskullz said:
When I type in ADB command it just states that the command is not recognized (even when SDK is open).
Click to expand...
Click to collapse
This doesn't mean that it can't find your phone, it means that it can't find the adb.exe.
Bloodyskullz said:
Build number 1.85.631.5.
Click to expand...
Click to collapse
That is a pre-911 build. Don't see too many of those any more. Rogers harassed everyone into updating.
Bloodyskullz said:
Now when I turn on phone it accepts it after I plug it into computer. I can mount sd card to copy files without issue.
Do I need another tutorial (preferably video since its easier for me but text is just fine)?
Click to expand...
Click to collapse
http://www.bleepingcomputer.com/tutorials/tutorial76.html
http://forum.xda-developers.com/showthread.php?t=502010
http://www.youtube.com/watch?v=Z3SpI7m7mFI

Does the zip file for the android SDK make a difference if I can't install it through the .exe? It keeps saying that it doesnt detect the Java SDK when I try to install.

Yes, you can use the .zip. Extract it, run setup.exe, install Platform-tools, cd to the platform-tools directory then you can use adb. Fastboot is in the tools directory. That was just changed in the 2.3 sdk update so I don't know if the guide has been updated yet.

beav_35 said:
Yes, you can use the .zip. Extract it, run setup.exe, install Platform-tools, cd to the platform-tools directory then you can use adb. Fastboot is in the tools directory. That was just changed in the 2.3 sdk update so I don't know if the guide has been updated yet.
Click to expand...
Click to collapse
The only .exe file in the zip is the SDK Manager which isnt exactly an install.

[Q] help a noob with adb!!!

ok...so im getting my mesmerize today and i have no clue how to get into adb...i got the android sdk and cant find it anywhere...could someone help a noob plz....you can slap me after i get clockworkmod on my mesmerize

Firedog7881 said:
Somebody please correct me if I am wrong.
You do not NEED to have your phone connected to your computer any more as long as you have the right programs on your phone. If you use z4Mod to root your phone, download the application Superuser to give applications SU permissions, install ROM Manager, and then use Root Explorer to move the files into their necessary locations and then use Terminal Emulator to execute the commands.
I have rooted, installed ROM Manager, backed up my ROM, installed the kernel in this thread all without knowing what ADB is.
All applications are available in the Market
z4Mod
Superuser
ROM Manager
Root Explorer ($4)
Terminal Emulator
Click to expand...
Click to collapse
I dident use adb to get it working. Found it faster to use root explorer to place files and then change permissions of the files on system and SD.
Then use terminal to run the command
Sent from my SCH-I500 using XDA App

for people (like me) that aren't good with command prompt adb... you should check this out QtADB (GUI) Based ADB

elijahblake said:
for people (like me) that aren't good with command prompt adb... you should check this out QtADB (GUI) Based ADB
Click to expand...
Click to collapse
WOW, This is nice. Thanks for the link!
You get slap rights.

BakedTator said:
ok...so im getting my mesmerize today and i have no clue how to get into adb...i got the android sdk and cant find it anywhere...could someone help a noob plz....you can slap me after i get clockworkmod on my mesmerize
Click to expand...
Click to collapse
Why does this need another thread.. ?? You already have all the resources in the previous thread you made, which people actively responded to. Certainly you could post any follow up questions there..

dcow90 said:
Why does this need another thread.. ?? You already have all the resources in the previous thread you made, which people actively responded to. Certainly you could post any follow up questions there..
Click to expand...
Click to collapse
sorry bout that...i had info there and didnt get it working so i posted new with a lil more detail...next time i will correct it...again my bad
ok guys....your help made clockworkmod happen for my mesmerize...much thanks...not to the roms!!!

BakedTator said:
sorry bout that...i had info there and didnt get it working so i posted new with a lil more detail...next time i will correct it...again my bad
ok guys....your help made clockworkmod happen for my mesmerize...much thanks...not to the roms!!!
Click to expand...
Click to collapse
I'm not a moderator nor do I run things around here.. don't apologize to me. I was just curious b/c I thought it was kinda funny that you thought you needed two threads d=

1 of the topics was cause I didn't understand adb at all. This one was cause I couldn't find adb in the android sdk.but now I got it all worked out and things are running smooth with pick_n_pack, voodoo 5 and cwm and getting 1800 on quadrant now...all hail xda community!
Sent from my SCH-I500 using XDA App

I need help with roms

I cannot flash roms or kernel. It won't boot recovery!!! I have stock rooted shift. How do I make a custom recovery? And install roms and kernel

Probably the easiest way is to download ROM manager from the market. The first option in the app is flash clockworkmod. Very fast and automagic. Have fun! Happy flashing.

I have that and kernel manager. Flashed it twice after it didn't work the first time. It hangs up on the HTC boot logo after I try to boot recovery

turn off your phone
power it on while holding vol down.
does the first line say S-OFF or S-ON?

S on I didn't do nand

I've tried a few more things. I used visionary to root my phone. Was that the wrong thing? It all works. But I can't flash. Lol

thronnos said:
I've tried a few more things. I used visionary to root my phone. Was that the wrong thing? It all works. But I can't flash. Lol
Click to expand...
Click to collapse
That's just a temp root. Go into the development section and use the GUI Root and recovery tool...worked for me.
Sent from my PG06100 using XDA App

Alright, is there a way to do this without a computer

thronnos said:
Alright, is there a way to do this without a computer
Click to expand...
Click to collapse
Yeah if you want you can use terminal emulator on your phone just open it up hit su get your super user permissions then start the commands the first time I rooted I did it using adb the second time I rooted I lost my adb and just chrome to phoned all the codes from my pc to root it from my phone
Sent from my PG06100 using Tapatalk

Alright!! Thank you all who have been helping. I have only a few more questions because I'm a little slow ^_^ ok, first. From the emulator I typed Su and gave permission.... now what? I looked for the commands in development and couldn't find. I'm trying to turn s off. I don't care so much about perm or temp root right now as long as I get that annoying s on to be s off. Lmao. I need commands please!!! Assume I have no access to a computer!

Check out the development subforum. It's a sticky thread by bcnice20.
i dont need a signature

Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol

thronnos said:
Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol
Click to expand...
Click to collapse
if you search that thread, there should be an answer.

thronnos said:
Alright I have that, now its not explained there but in order to do that via the terminal do I need to dl the framework and sdk to my phone? I do not have a running computer right now. I had a crap amd system which is officially dead. It's now all spare parts. So doing the shell on a computer isn't going to work for me :/ yes, I'm difficult. Lol
Click to expand...
Click to collapse
the commands given in that thread is the exact ones you would need, but since you're using a terminal emulator in your phone, you don't need adb.
do step 1
skip step 2
do step 3,4,5 via your terminal
do step 6
extra points:
once you're perma-rooted, you can go straight to installing Rom Manager, and flash clockworkrom that way.
then reboot your phone to recovery, and do a nandroid backup.
once that's done, you're all set.

Thank you dude!!!!!!! That rocks!!! I'm at work and I'm doing it right now. This is way more important than work ^_^ anyone else addicted to Android?

thronnos said:
Thank you dude!!!!!!! That rocks!!! I'm at work and I'm doing it right now. This is way more important than work ^_^ anyone else addicted to Android?
Click to expand...
Click to collapse
+1
When the perm root method was finally developed I was at work with no access to a PC. I ended up rooting via phone terminal just because I couldn't bear to wait a couple hours until I got home.
^ Shift Faced

Could someone explain step 1 and 3 for me if I'm using android terminal emulator. I tried it but nothing happened. My device is temprooted. I download the file into the download folder. I use root explorer to extract it... where?? I tried a couple places even the root folder (Its not in SD card) then once its good how do I check the md5 from the terminal. I type Su to get permission then what? The string in the post doesn't seem to do anything no matter how I type it. Or maybe I just don't know the command. I'm fairly new to this kinda thing. :/

That's awesome. I'm feeling the same way. I don't want to wait for a computer it might be a few weeks I'm impatient now lol

Wait, I got part of it. I just need to know how to save the file to the root of the SD card and then how to check the md5sum. Once I know that I'm good to go
Sent from my PG06100 using XDA App

thronnos said:
Wait, I got part of it. I just need to know how to save the file to the root of the SD card and then how to check the md5sum. Once I know that I'm good to go
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Download root explorer and long press the file in your download folder, then back out to your sd card directory and select move. You should be able to check mdsum5 in the term app using the commands given
Sent from my PG06100 using XDA Premium App

[Q] Wanting To Root

Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.

priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
Android adb http://developer.android.com/guide/developing/tools/adb.html
which is in the sdk http://developer.android.com/sdk/index.html
You dont really need to know what the other tools are listed do, you just need to do what it says with them and the tools are linked in the thread you're reading to download I assume. If they aren't, then read through the manual method that is stickied in the developer's forum. A link for the tools (misc.img, busybox, and psnueter) can be found there.

I was a little nervous at first myself. I read over the directions several times and then found some information on how to get adb installed and working. Once I got that step understood the actual rooting process was super easy. You can cut and paste all the commands to ensure you don't typo. Just make sure to validate your checksums to save any potential headaches. My first attempt at it took about 20 minutes and I had absolutely ZERO issues.
It is well worth your time and effort. It is also far better to use this method than the easy root 1 steps as you will gain a slightly better understanding of how your phone works and what steps you can take when you inevitably mess something up flashing ROMS, mods and radios

Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.

There are also videos on YouTube showing JCases method and adb setup. I would link but I'm on my phone but it shouldn't be to hard to find.
Sent from my ADR6400L using XDA App

priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
reading through this might help http://forum.xda-developers.com/showthread.php?t=1143188

There is no "easy", reliable way to root sans ADB and command lines. You will need to know this stuff before you try to root. You're going to need ADB in any event. If learning it isn't knowledge you desire, you shouldn't root your phone. For terms, you should refer to the dictionary stickied at the top of the forum. The best way to learn is to get the Android SDK, set it up, make sure your drivers are there, then play with ADB. Do simply stuff like check your serial number, the md5 of files on your SDcard, and harmless stuff like that. If you've got any questions along the way, feel free to PM me any time. I'm here often. And I'm usually faster than hunting through forums or the internet.

priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2

I would not recommend "easy" root methods, since there is greater room for error. Understanding ADB will help you in the long run

MeAt.HoOk said:
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
Click to expand...
Click to collapse
Don't think z4root works on the Thunderbolt just search youtube for Thunderbolt root and watch the tutorials. Links are provided for everything that needs to be downloaded.
Sent from my ADR6400L using XDA Premium App

I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.

loonatik78 said:
I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.
Click to expand...
Click to collapse
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App

nerogold said:
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.

loonatik78 said:
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.
Click to expand...
Click to collapse
Sorry man I just wanted to say thanks to the other user I mentioned ,his method of rooting was and still is a great help to me already rooted 5 bolts and currently on #6 as I'm typing.
Sent from my ADR6400L using XDA Premium App

Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.

Greywolf66 said:
Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.
Click to expand...
Click to collapse
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.

Ive used the one click root four times with no issues. Four diffrent tb's from 3 diffrent states. 2 of them had alrdy takin the ota's. Dont have the link handy but if was a time saver. Though a half arse understanding of the method helps avoid issues. Ill post the link when i get home.
Sent from my ADR6400L using XDA Premium App

loonatik78 said:
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.
Click to expand...
Click to collapse
I rooted mine manually first. As you said in a previous post most "easy" roots are just scripts. That's what the one I used on my wife's was. I was following along the text of the batch file as I was running it so that if something happened I would know at what part of the script I was at. I had no problems with it though.
I'll agree that I could see where if someone where to run into a problem using script without any knowledge of what the script was doing they would probably end in a very bad place.

I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.

TabGuy said:
I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.
Click to expand...
Click to collapse
Come on, cut him some slack. Everyone was new once. He has already been warned.
Sent from my ADR6400L using XDA App
priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
ADB "Android Development Bridge" Simply put just helps you develop apps and fix bugs. (In this case, you will use this to reinstall Android without a locked bootloader (a.k.a. S-Off) (the bootloader is code that is run when you first turn on your device that tells Android to run).
You don't have to know how to use ADB, but you must install it on your computer.
As far as copying and pasting commands go, the tutorial that you choose to visit will tell you to type this command ex: cp image.zip/sdcard/
You will just copy this code out of your browser (FireFox/Internet Explorer/Chrome/etc.) and paste it into a command line.
Your command line will depend on what operating system you use on your pc. Ex for Windows, you will use "Command Prompt" or on Linux/MAC you will use "Terminal".
As far as validation checksums goes, it is used to make sure that the file that you downloaded is 100% the same file that the developer made.
Basically, open up your command line and type (without quotes) "md5 image.zip" also, make sure you change to "image.zip" with whatever/where you file is at.
I would be more specific with these instructions I'd I knew what OS (operating system) you are using on your computer is.
After you type in the command and hit enter, it will spit out a long string of gibberish. Just make sure this "checksum" is the EXACT same as whatever the devolver put in the tutorial you are following.
As far as putting together an idiot proof guide, you will have to forgive us, but I don't think the people here want to have a bunch of people here flooding the forums with very basic questions that have been answered already on the internet. However, don't let that stop you from asking questions. Just make sure you help yourself first (Google what you don't understand) and then ask for clarification.
P.S. I claim touchscreen amnesty for any typos.
Sent from my ADR6400L using XDA App

BEST Guide for Returning to Stock ! (Add to guide thread?)

Here are the directions and files used to fix this problem (do not type any of the "quotation marks"):
1. Download the .zip file from here: http://www.megaupload.com/?d=YUYEMJNM
and put it on the root of your sdcard. (Do not unzip the file). Then rename it to PD15IMG.zip .
2. Download the miscnew file to your computer (uploaded as attachment to this post). Unzip it and place the miscnew.img file that was in the zip onto the root of your sdcard. You can delete the .zip file after you do this.
3. Boot your phone up like normal and connect your phone to your computer.
4. Make sure your sdcard is NOT mounted (but make sure those 2 files were copied to your sdcard).
5. Go into adb and type "adb shell"
6. Then type, "su"
7. Then type, "dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17"
8. Once this is done after about 5 seconds, turn your phone off and unplug from the computer.
9. Once the phone is off, hold down the volume-down key and the power button until you arrive at the bootloader. Once there, the phone should automatically start checking that .zip file you downloaded to the root of your sdcard. After its done checking, it will ask you if you want to continue, and just follow the prompt to say "yes" and YOU'RE DONE!
This guide was made by travisjames and was just put into my own words. His guide was a derivative of Apache14's OTA and Radio downgrade guide for the T-Mobile G2.
Also, thanks to Clarknick27 for tipping me off on how to get back into my phone after it was unbootable.
***Please click "thanks" if this helped you!

Ignore/Wrong thread...

two questions-
if i used gfree, do i need to undo gfree 1st? (you make no mention of rooting techniques, and if this undoes all those or not)
second, my phone, about a month ago, lost data connectivity on the usb port-- in other words, it charges fine, but i can not get any computer to pick it up any more to transfer files are use adb, which is a royal pain. -- can i use terminal emulator to accomplish your commands, or am I SOL ?
thanks

Yes, you need to undo Gfree.
Yes, you can run the commands from Terminal Emulator.
Added to Wiki.

thanks jack,
would the syntax be exactly the same as above via term em?

Yes, just skip the "adb shell" command.

Is this to undo 2.3.4 GB update and take it back to 2.2.1?

How do I undo gfree? And if I just run the pg15img will I keep root? I need a way to return to stock but rooted.
Sent from my Incredible 2 using XDA App

andrewp3481 said:
How do I undo gfree? And if I just run the pg15img will I keep root? I need a way to return to stock but rooted.
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
First question, Here is the thread you need to undo gfree (get s-on) http://forum.xda-developers.com/showthread.php?t=858996 (about half way down OP)
Second question, no you will not keep root
witch stock rom do you want rooted, stock 2.3.4 can not be rooted right now

So... to summarize, this would be to revert back to Android 2.3.4, sense 3.5 STOCK, without root, eng. hboot, or s=off.
In other words, if you purchased a MT4G now, or received a replacement MT4G with 2.3.4.... Following these steps will give you this new gingerbread stock state (approximately).
Please confirm. Thanks!

can i use this steps with terminal emulator on my phone instead of adb?

unciviilized said:
can i use this steps with terminal emulator on my phone instead of adb?
Click to expand...
Click to collapse
Yes...check the 3rd and 4th post of this thread....

Just curious, so if I flash this ROM in recovery, will I lose root, s-off, etc.?
What I'm trying to do is flash the phone to the MT4G stock rom (which I assume this is), use gfree to sim unlock it, then revert back to my nandroid backup, so I wanna make sure this will not interfere with my root access before I proceed to flashing it. Thanks in advance to whoever answers me~!

ronin178 said:
Yes...check the 3rd and 4th post of this thread....
Click to expand...
Click to collapse
ok so when im on emulator i do "s" and it says permission denied,
then i got to command prompt and it says adb shell is not recognized as and internal or external command. Any suggestions?

unciviilized said:
ok so when im on emulator i do "s" and it says permission denied,
then i got to command prompt and it says adb shell is not recognized as and internal or external command. Any suggestions?
Click to expand...
Click to collapse
You don't need to type adb shell because you are on terminal emulator.
Just type su to gain superuser access.
Then type dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17
Make sure you have the file miscnew.img in the root of your sd card.

Absolutely Perfect
I have looked and looked all over both XDA and the Interent in general. I was trying to restore my Glacier (MyTouch 4g) from stock 2.3.4 to stock 2.2. NOTHING worked. It got to the point that I didn't even remember everything that I tried. I followed this guide to the T. PERFECT!!! I am now back to having my phone exactly how I left the Tmo store with it.
I CANNOT THANK YOU ENOUGH!!

Great work in helping people out that don't understand. And making it a less strenious process
Sent from my HTC Glacier using xda premium

Jack_R1 said:
Yes, you need to undo Gfree.
Yes, you can run the commands from Terminal Emulator.
Added to Wiki.
Click to expand...
Click to collapse
Sorry, a complete noob to "gfree". I'm a new convert to GSM as I was with SPrint CDMA for 10 years until a couple weeks ago. I've rooted Samsing phones but never an HTC.
Anyways, I just purchased a MyTouch that had been rooted and loaded with Virtuous ROM. It's for my wife and she wants it back to stock. I tried all your directions exactly but still will not work. I'm assuming it's this "gfree" issue. I followed the link to the other thread but it's not clear on exactly what I need to do in my situation.
When I run the bootloader, it says bad or no such image... I have confirmed I have PD15IMG.zip and miscnew.img in the sdcard root directory.
Can someone please show me in simplified terms. Thanks!

socal88 said:
Sorry, a complete noob to "gfree". I'm a new convert to GSM as I was with SPrint CDMA for 10 years until a couple weeks ago. I've rooted Samsing phones but never an HTC.
Anyways, I just purchased a MyTouch that had been rooted and loaded with Virtuous ROM. It's for my wife and she wants it back to stock. I tried all your directions exactly but still will not work. I'm assuming it's this "gfree" issue. I followed the link to the other thread but it's not clear on exactly what I need to do in my situation.
When I run the bootloader, it says bad or no such image... I have confirmed I have PD15IMG.zip and miscnew.img in the sdcard root directory.
Can someone please show me in simplified terms. Thanks!
Click to expand...
Click to collapse
If you are new to this rooting stuffs, i suggest don't go with methods, that have potential to brick your phone.
Just do this simple method, Follow the link in my signature, you will see a Rooted version of the stock 2.3.4 rom.
Just flash the Rom through your recovery.........no big deal.......easy way to get the stock feel.....
Follow the instructions carefully.........Happy Flashing........

Thanks for the great help. One more question -- How do I turn "quick boot" off?