[Q] question about Rogers Samsung Infuse 4G (I997R) - Samsung Infuse 4G

I can install custom rom at&t (I997) in Rogers Infuse (I997R)?
and rom that works.
thanks a lot.

Rogers Infuse is identical (as far as I know) to AT&T Infuse.
I have used custom roms (MIUI, CM7, GSInfuse, Infused, Dlev, S7, Sensation and etc) in this forum on my Rogers Infuse.

JOJO_SSC said:
I can install custom rom at&t (I997) in Rogers Infuse (I997R)?
and rom that works.
thanks a lot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17443732&postcount=20

Related

[Q] What are the differences between the Rogers and the ATT version of the Infuse 4G?

Hi All,
I have just purchased the Samsung Infuse 4G as my new secondary device after my SGSII and I am wondering what the substantial differences are between the Rogers and the ATT version of this device, keeping in mind that I am in Canada and am on Rogers?
What ROMS CAN and CANT I flash? What Kernels CAN and CANT I flash?, etc, etc, etc...
Please advise as I used to have the Galaxy S I9000M (Canadian version of the International version) and I was able to flash International ROMS, etc... Can this be done on the Infuse 4G without losing my proper service bands, etc?
Thanks for the replies...
Galaxy S lable, Gingerbread that i know of.
Optimus-Prime said:
Galaxy S lable, Gingerbread that i know of.
Click to expand...
Click to collapse
Im sorry but I dont understand wht you are trying to tell me. What is "Galaxy S lable" and what do you mean "Gingerbread that I know of"? If you mean that the ROGERS version already comes preloaded with Gingerbread 2.3.3 and NOT with Froyo 2.2.1 then that I already know.
Please advise...
Well the Canadian Infuse is a Galaxy S device and are is not even though it is the same device. So this just proves that Galaxy S is just a label.
and the android version. those seems to be just the major differences.
Optimus-Prime said:
Well the Canadian Infuse is a Galaxy S device and are is not even though it is the same device. So this just proves that Galaxy S is just a label.
and the android version. those seems to be just the major differences.
Click to expand...
Click to collapse
Thank You again for your reply Optimus but what I am really wondering is if I am able to flash "ATT based" custom ROMS, etc after I root and install CWM. I know the rooting proceedure for the ROGERS version of the Infuse 4G is different but is the actual "firmware"? Will I mess up the device by flashing it with ROMS created from ATT firmware, etc?
Does anyone know?
i dont think it would matter since we are running your roms on your phones. Gingerbread. but i mean you can always ultimate unbrick if something goes wrong. so its worth a try. and just a hint. att roms are froyo based
From what I can tell you,
We have Gingerbread 2.3.3 we do not have HDMI output. (Not a big deal for me).
Our video recording is a bit messed up (Recording at 15fps) but there is a fix now. Other than that there's not a huge difference.
Differences:
1) Cosmetics (that's what the other guy meant by "Galaxy S label") - no differences internally hardware-wise
2) Gingerbread bootloaders
Basically 2) means you can't flash old Froyo-based ROMs because no one bothered to make them compatible with the GB bootloaders - we focused on going the other way around. Our Gingerbread kernels are capable of working with Froyo or Gingerbread bootloaders.
Any ROM you might want to flash is based on your stock firmware currently, since official AT&T Gingerbread isn't out yet. Samfirmware claims it's officially out on Kies, but Kies refuses to connect to our phones so I call BS.

Need assistance with Infuse 4G details inside

I just got my infuse 4G yesterday and i have been trying to find the same firmware that is on the Att Samsung Galaxy S2. I have just learned how to use odin, and thats all i know how to get roms on my device.
Can anyone give me a working Samsung galaxy S2 rom that is able to be used on odin.
Currently i have
Firmware: 2.3.3
Gingerbread. UXKG3
Kernal: 2.6.35.7-I997RUXKG3-CL366622
Baseband: I997RUXKG3
I downloaded this from Rom Manager i think, the phone has a signal but it has no data.
Also everytime i try to install a rom using the ROM MANAGER the screen begins to look like a tv with a whole bunch of colors and it just reboots with no success at.
I ever got to install the 2.3.5 gingerbread for the infuse 4G but keep getting a #*999* email error and i dont know how to fix that.
Can someone point in the right direct step by step
The Infuse can't run Galaxy S2 ROM's. It can run Galaxy S (I9000/Captivate) ROM's using the Hellraiser patch and kernel. There are several ROM's to choose from in the Infuse development section of the forum, including both Infuse ROM's and Galaxy S ROM's already modified to work on the Infuse.
GGXtreme said:
The Infuse can't run Galaxy S2 ROM's. It can run Galaxy S (I9000/Captivate) ROM's using the Hellraiser patch and kernel. There are several ROM's to choose from in the Infuse development section of the forum, including both Infuse ROM's and Galaxy S ROM's already modified to work on the Infuse.
Click to expand...
Click to collapse
Ok so how about this.
Do you know where i can get a list of roms that work on Odin for the Samsung Infuse 4G, because that seems to be the only way i know how to install roms on the device.
ok to use odin means you cant flash hellraiser. that means if you dont see the firmware in this forum in a .tar you cant use it the way you are describing. basically all the odin roms here are return to stock packages(so far)
however if you flash a voodoo kernel or otherwise get cwm you can use cwm to flash any 2.3.3-2.3.5 rom in the gsm type galaxy s forums (not cdma) as long as you immediately flash the hellraiser package over it,. dont reboot the phone till after both the rom and hellraiser are both flashed!. many of these roms have heavy sgs2 theming. look especially in the captivate, vibrant and i9000 sections. do not flash anything for the i9003, epic, facinate (unless it's telus which is more like a vibrant), mezmerize or other.

[Q] Galaxy SII LTE Rogers rom with AT&T app?

I just flashed my Galaxy SII LTE (Rogers) following the instructions at this page.
http://forum.xda-developers.com/showthread.php?t=1570498
It says: ICS rom for AT&T or Rogers. Everything works well except for one this.
This ICS rom was filled with AT&T app. I don't need those app and most of it can't be removed. Did i miss something?
It says at&t OR Rogers. Now i have a blended At&t/Rogers smartphone....wow.

i727r ics

who has rom ics 4.04 from i727r ? and upload the picture how the rom ?
the rom i727r to be work if install to i727 at&t
this not make problem?
thanks ?
eli7897 said:
who has rom ics 4.04 from i727r ? and upload the picture how the rom ?
the rom i727r to be work if install to i727 at&t
this not make problem?
thanks ?
Click to expand...
Click to collapse
Sorry, it's very difficult to understand what you're asking.
Are you looking for the official (stock) Rogers ICS rom that was released in June? You should be able to get this update through KIES, but if you're looking for the .tar file...
Some searching of this forum for the firmware revision name (I727RUXLF3) turned up this:
http://d-h.st/m9P
Samsung also has a firmware repository so you could download from them directly (Probably safer), you will need to make an account though:
http://www.sammobile.com/firmware/?page=8&view=4967#
You will need to know how to use ODIN in order to flash this, do some research and reading about how to use ODIN, because you can mess up your phone if you click the wrong thing.
My understanding is that the official Rogers ROM will NOT work with an AT&T phone. You would need to use a custom ROM based on the latest AT&T leak (UCLF5), as they have not yet released an ICS rom to my understanding (Someone correct me if I am wrong...).
If that's not what you're asking then please try to clarify.
im pretty sure hes asking who has the rogers ics rom and if they do can they upload pictures (probly battery and stuff) and whether the rogers ics release can be used on the at&t skyrocket
Stock Rogers ICS rom available from sammobile.
Sent from my SAMSUNG-SGH-I727 using xda premium
yes this my question
rogers ics release can be used on the at&t skyrocket
It is possible to use or that it is suitable only for 727R
I have the ATT
If the install of Rogers will not be a problem so ask
2. Is there 14 toggle for ics 4 from rogers?
Hi Eli,
I also have Rogers Stock ICS 4.0.4 from Sammobile and am looking for the 14 Toggle Mod in the notification bar.
So far, I cannot find anything and nobody has posted a reply. I tried to mod this ROM myself but I'm not experienced enough with ODEX ROMs.
Here is the thread I've posted:
http://forum.xda-developers.com/showthread.php?t=1757197
I hope you get an answer to your questions.
ok but your phone this i727 att
my phone i727
the rom i727r worked with i727 att?
I have the Rogers i727r with stock ICS rooted.
If you have an ATT i727, I think the Rogers ICS will work but maybe not perfectly.
What is your reason to put the Rogers ICS on an i727 ATT phone? Wouldn't it be best to use the stock ATT ROM?
beacuse att not yet out ics
this very Annoying
and i want ics
ok thank you man
For you eli:
http://forum.xda-developers.com/showthread.php?t=1761655
Cschmitt posted a functional tar file.
--
SGH-I727 using Tapatalk, running cm9. Trouble searching? http://forum.xda-developers.com/showthread.php?t=1754490
yes thanks buy the rom 4.0.3
and have 4.0.4
att not good

any rom for sgh-i997r please help

hi guys any for sgh-i997r
4.0.4
4.1.2
4.2.2
plzzzzzzzzzzz
I could be wrong but I believe pretty much all of these will work with the i997r as well.
Tap'n and Talk'n from my Infuse 4G
I can vouch for this, having once owned a i997R. Only ROM that is device specific (AT&T vs. Rogers) is stock.

Categories

Resources