[Q] [q] problems getting cwm installed?? - Xoom Q&A, Help & Troubleshooting

I've gone through unlocking my xoom wifi only (MZ604). Then when I try installing cwm it says all OK with the flash via fastboot but when I restart and hit vol down after 3 seconds I never gets the option to go into recovery?
Can anyone help pls?

Power & Vol up until you see the M. Release them then 3 or 4 seconds after your release press vol down.

UOTE=jerrycycle;18912033]Power & Vol up until you see the M. Release them then 3 or 4 seconds after your release press vol down.[/QUOTE]
thx for the info. when I do that, I only get options to go into rsd, fastboot or nvd or something? hmmm...

Flash the recovery again. Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.

CHAMPION!!
jerrycycle said:
Flash the recovery again. Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
Click to expand...
Click to collapse
Thanks mate - jerrycycle u r a legend!!!

Related

[Q] How to get into stock recovery?

Can someone tell me how to get into the stock recovery?
Power up in to H-boot (power + volume down) and choose recovery from there. It could be power + volume up, can't remember 100%
Why do you need stock recovery? nothing interesting there as far as I could tell....
borodin1 said:
Power up in to H-boot (power + volume down) and choose recovery from there. It could be power + volume up, can't remember 100%
Why do you need stock recovery? nothing interesting there as far as I could tell....
Click to expand...
Click to collapse
I Tried... I hit Recovery from Bootloader and all I got was a Triangle with Exclamation piont. Had to pull battery and power on.
Press volume up + power together in recovery to see options.
borodin1 said:
Press volume up + power together in recovery to see options.
Click to expand...
Click to collapse
Do you meen press volume up and power when your in the bootloader? I could not get into stock recovery from bootloader.
No. When you're in bootloader, scroll down to recovery using volume keys and select it using power button. Phone will reboot into recovery. Then, while you are seeing pic of a phone with exclamation point, press volume up and power button simultaneously to show text.
Sent from my HTC Sensation 4G
boot loop
I'm actually having a simular problem. I installed Apex onto my C Spire Milestone X. Loaded into a boot loop and i tried to get into recovery mode. It jus gave me a triangle wit (!) in it. How can i reset my device? Please help!!!!
most likely u need to load the htc bootloader / cid maybe even hboot...
Blacking06 said:
I'm actually having a simular problem. I installed Apex onto my C Spire Milestone X. Loaded into a boot loop and i tried to get into recovery mode. It jus gave me a triangle wit (!) in it. How can i reset my device? Please help!!!!
Click to expand...
Click to collapse
That is the stock recovery. Hold power and press vol up (I think, been a while since I've used it) to get the menu.
You should flash a recovery first, man.....if I understand the problem correctly

can't get into recovery

Hi i just flashed my transformer to this rom
http://forum.xda-developers.com/showthread.php?t=1514658
and now i can't go into recovery help please
Vol down plus power button and when you see words at top left corner you must push Vol up within 5 second.
Alternative is use the "Transformer boot into recovery" app from market.
Btw what is it doing when you try to get into recovery?
Are you trying to get into recovery by an app, or using the buttons as baseballfanz described?
If you cannot get into recovery using the buttons you may have to reinstall the "RecoveryInstaller.apk" for CWM to get it working again.
I can boot into Clockwork Recovery using the app but actually what is the exact button combinations to boot in to Clockwork Recovery?
Thanks.
bluebrew said:
I can boot into Clockwork Recovery using the app but actually what is the exact button combinations to boot in to Clockwork Recovery?
Thanks.
Click to expand...
Click to collapse
Turn off. Hold VOL DOWN and POWER for about 10-12 seconds until small text appears. Tap the VOL UP within 5 seconds of when it says to press VOL UP to enter RCK.

[Q] Reboot loop after 4.4.2 update to 4.4.4

Okay so I have just updated my phone yesterday as I got a notification saying there was an update to 4.4.4 so I downloaded it and installed it and now the phone is stuck in a boot loop, is there any possible way that you can make simple for me as I am new to rooting and flashing phones, this was my first ever time.
Thanks for any help or advice in advance.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Okay so after doing a couple days research and listening to you guys, I found out when I rooted I didn't flash a recovery... So yeah I installed CWM recovery and then wiped cashe partision and it worked. When I wiped it, it came up saying to "fix root" as I may have lost in then I clicked yes then booted straight away. That's it fixed now.
Thank you for your help everyone!
Gyrotize said:
Okay so I have just updated my phone yesterday as I got a notification saying there was an update to 4.4.4 so I downloaded it and installed it and now the phone is stuck in a boot loop, is there any possible way that you can make simple for me as I am new to rooting and flashing phones, this was my first ever time.
Thanks for any help or advice in advance.
Click to expand...
Click to collapse
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Jeetu said:
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Click to expand...
Click to collapse
I can't even get in recovery mode...
Gyrotize said:
I can't even get in recovery mode...
Click to expand...
Click to collapse
When the phone is rebooting, press and hold power down, you'll then get into Fastboot. From there, go to Recovery using the volume down key and when selected, press the volume up to select. If it tries to install the update again, don't let it reboot into the ROM - when the recovery restarts itself, make sure you hold volume down again.
Jeetu said:
Go to recovery and wipe data and wipe cache hope it works,
Good luck
Click to expand...
Click to collapse
zedlor said:
When the phone is rebooting, press and hold power down, you'll then get into Fastboot. From there, go to Recovery using the volume down key and when selected, press the volume up to select. If it tries to install the update again, don't let it reboot into the ROM - when the recovery restarts itself, make sure you hold volume down again.
Click to expand...
Click to collapse
It doesn't work it just keeps rebooting and coming up with the "bootloader unlocked" screen after itself
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
buggerlugz said:
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
Click to expand...
Click to collapse
This is the better first post ever :good:
denzel09 said:
This is the better first post ever :good:
Click to expand...
Click to collapse
Still none the wiser how to update to 4.4.4 though! I mean surely with a rooted phone there is an app to do it these days???
u can try this
if you have unlock bootloader and can go to fastboot mode,.try to flash your moto g using your 4.4.2 stock rom by manually (you can search how to do it),.flash partition gpt and motoboot (ignore the error),reboot bootloader and finished the rest command..flash phil touch recovery and reboot ro recovery,go to install zip,choose install zip from sideload then send your phone update using sideload command.
that"s solved my problems when i'm getting stuck on blank screen after unlock bootloader warning or only booting to recovery,i'm on 4.4.2 when get that error.
but now in my case,i should go to fastboot mode and choose normal powerup to make my phone booting normally,.because if i'm power on using power button,moto g booting to recovery,not a big deal for me as long as my phone back to the track hehehe
my moto g is o2 germany,but i'm flashing with 4.4.2 germany retail and 4.4.4 update for germany retail.
buggerlugz said:
1. With the phone powered off, press the VOL UP + VOL DOWN KEY together + POWER KEY .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to SELECT
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL DOWN key, then tap and release the VOL UP key.
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 5, try a force reboot by pressing the power Key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to wipe cache partition and the POWER Key to SELECT this option.
8. The device will then perform the partition wipe
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
11. The device will reboot and start the normal power up sequence .
worked for me.....
Click to expand...
Click to collapse
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Okay so I have been researching for a little while now and I found this video on youtube, could you please tell me if this will work?
/watch?v=laU6NQ0LxR0
Thanks you.
Gyrotize said:
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Click to expand...
Click to collapse
that's mean you can't access your stock recovery...try to flash your stock rom moto g 4.4.2 then install philz,use sideload to install the update file.
Gyrotize said:
Okay so I get to step 3 and it reboots. It shows the "bootlocker unlocked" then it shows it again then goes onto the normal Moto G boot screen with the logo and is still bootlocked.. HALP
Click to expand...
Click to collapse
It looks as if it will boot into recovery, then the screen goes black then goes into the normal boot screen then boots....

Can't go to recovery mode using power button and volume down button

I have installed a custom recovery. But can't go to the recovery option using these two keys. I can go via app,but i'm afraid if i brick the phone,then that method won't work. Please enlighten me. Thanks in advance.
Kitkat recovery vol down + power logo appear pres vol up and vol down same time.
Lolipop vol up +power... Logo appear release vol up keep pressing power... Korean language appear press power again.
Download mode press power+ vol up... Then release power.
pato2015 said:
Kitkat recovery vol down + power logo appear pres vol up and vol down same time.
Lolipop vol up +power... Logo appear release vol up keep pressing power... Korean language appear press power again.
Download mode press power+ vol up... Then release power.
Click to expand...
Click to collapse
Don't Worry,
Download ADB toolkit
go to shell
and run command by on debugging on in developer option..
developer option can be on 'About Phone'---> Software Information---->Build Number (Click 10 times)
command: adb reboot recovery
If you have custom recovery, use only kitkat method.
1. Power off device
2. Hold volume down and power button at the same time
3. When lg logo appears release for second and now hold volume up and volume down at the same time
It is a little tricky and you maybe need to restart device multiple times
4. You will get "Factory data reset" screen
Now, if you have custom recovery you can select "Yes" and enter recovery, this will not format your data. But if you have stock recovery it will format.

Need some help upgrading to KK6

I am currently running KK 5. something on my TF101 with TW 2.8. I have downloaded all the KK 6 files but can't get into recovery. I have tried to power down and boot into recovery, TW app boot into recovery, three button method and nothing seems to work. With the three button method I hold power and vol down until the screen with text pops up, then press the vol up key. After about 5 sec the screen flashes and goes black....then nothing. any thoughts?

Categories

Resources