[Q] Samsung Captivate Stays on Battery Stand By after using Odin3 - General Questions and Answers

I have a Samsung Captivate and I've been having some issues that have gave me some trouble, Yeah I know it says to look up previous cases of the device but I have yet to find Anyone with the same problem and I've been at this for a week now trying to fix this phone.
When I press the power button the AT&T Logo comes on but only stays there for about 8 seconds then turns off it'll stay on if I hold the power button.
First I tried the Odin3 program, I followed all instructions for it. My phone can go into DL mode and my computer can recognize it as a device, I booted up the program and so far I've had no problems during the process the Odin detected my phone and finished the process but when it finishes my phone will boot to the AT&T logo for a couple of seconds then it'll go to the battery stand by screen and ... that's it.
I tried looking on google for anyone who is experiencing the same problem and so far close but not the same and I ran out of ideas...
Can someone please help me out because I really want this phone to work and Yes I am a noob -.-

Related

"Converting data partition..." Problem

Alright, allow me to summerize to you guys the series of screw ups that happened in the day that I've had my captivate.
Basically, it's like this. I got this phone from my brother (it used to be his). Now when I got it, I began basically erasing his contents and setting up mine. The Phone is on the Cognition OS and everything seemed fine.
Now, when I tried to set up my google account, it said I had to do a factory reset, I did that. Then I realized the market place app was no longer there :/
I did another factory reset, still didn't help, and started looking around for info.
I told my buddy this and he said he could fix it. So he get's the update.zip for rooting the phone, sets it up on the SD card, and goes to root the phone normally. Except when he restarts the phone after, it doesn't go to the set up screen, so he just starts it normally and enters the setup screen by holding home+volume up+power.
Then he presses the reinstall packages, and the phone seems to get to work on the update pack...
Now, every time I turn on the phone the voice says "converting data partition to optimize extension four", turns off, then repeats.
I've looked up this problem and it seems to have something to do with voodoo, but the causes in the other cases the causes were different.
Can someone please help me out here? I've also tried doing a hard reset by holding the volume down button and pressing power, but nothing seems to take me to the recovery mode.
HELP.
Did you pull the battery during this our did you let it run? Should let it run.
Does your phone boot up at all?
At&t or rogers?
Do you have a windows pc with usb drivers installed?
What its your build number, located under battery, something like 1008?
Answer these questions and we can get you back up and running
-Well after he did the reinstall thing we let it run for like 15 minutes, then he pulled the battery out.
-The phone only shows the AT&T screen, say's the "converting data partition..." thing, then goes blank and does it again. I've let it run for like 10-15 minutes before having to turn it off because I couldn't have the speech going off.
-I have a windows PC, and but I'm not sure if I have the drivers installed. I have Kies installed and when I plugged the phone in before Kies could recognize the phone (though it wouldn't fully connect, it would just say "connecting" on the kies screen).
-The Model is SGH-I897, that's the only relevant thing I see under the battery, that good enough?
Thanks a lot.
No, your phone has a build, on phone under battery, the word build is not listed. Something between 1006-1012
If we are going to do this you need to be active, I can not wait 20 minutes in between responses
Sorry the internet kinda crapped out actually.
And I see a 1007 between the bar codes, that it?
Yes
Before we get started try this
Take battery, sim, ext sd our of phone
Plug usb into pc but not phone
Put battery back in
Hold volume up and down, while holding plug in usb
Screen should come on with android with shovel
You can pull the battery again
Confirm this happened
Yep, it happened.
It may be easier if we use gtalk, log in on your pc using google id, send me an invite [email protected]. This way we know when each other respond
Just sent u the inv
I am having the same issue.. Chairchair did your problem get resolved?
Can anyone help?
James
liquorsh0tz said:
I am having the same issue.. Chairchair did your problem get resolved?
Can anyone help?
James
Click to expand...
Click to collapse
Have you gone back to stock and then reflashed? Seems like some files are getting corrupted. Because you have a voodoo kernel I would follow these steps. Make sure to back up.
1. Use Odin to flash a non vodoo kernel.
2. Flash stock rom and master clear
3. Reflash rom of choice if it is 2.2
3a. If you want 2.3 follow the tut on it.
4. Breath a sigh of releive lol

Bricked Captivate - Random dots on the screen instead of Download mode

Hi there,
To brief the story:
Tried to upgrade my Rogers Captivate non-root Froyo to Gingerbread trough Kies the first attempt failed as after 30 min there was no progress on the installation bar, I disconnected the phone and restarted it, it booted up well and again I tried to upgrade. This time the bar filled up to 10% and then the screen on my phone went all Pink!! and the progress got stuck, then the phone was in semi-bricked state. I tried to flash back to 2.2 stock ROM on Odin 3 v1.82 the progress failed half way with a all purple screen (the green bar on Odin was almost at the beginning of the procedure). I thought to get it into DL mode once more to see if I could succeed but no DL mode anymore, all I get is random dots all over the screen!! and even when it gets connected on COM, ODIN cannot reach it anymore and it fails at Setup Connection. My belief is that my phone is bricked totally, but wanted to see if anybody on XDA has any thoughts for this.
Thanks for the help and time in advance.
Chrs.
metpink said:
Hi there,
To brief the story:
Tried to upgrade my Rogers Captivate non-root Froyo to Gingerbread trough Kies the first attempt failed as after 30 min there was no progress on the installation bar, I disconnected the phone and restarted it, it booted up well and again I tried to upgrade. This time the bar filled up to 10% and then the screen on my phone went all Pink!! and the progress got stuck, then the phone was in semi-bricked state. I tried to flash back to 2.2 stock ROM on Odin 3 v1.82 the progress failed half way with a all purple screen (the green bar on Odin was almost at the beginning of the procedure). I thought to get it into DL mode once more to see if I could succeed but no DL mode anymore, all I get is random dots all over the screen!! and even when it gets connected on COM, ODIN cannot reach it anymore and it fails at Setup Connection. My belief is that my phone is bricked totally, but wanted to see if anybody on XDA has any thoughts for this.
Thanks for the help and time in advance.
Chrs.
Click to expand...
Click to collapse
From my experience with the Galaxy Ace , Kies is a major killer for the phones .
I think that it's fully bricked and cannot be fixed unless you bring it to Samsung .
Forever living in my Galaxy Ace using XDA App
Yes it seems there is no way out of this. I cannot believe how a simple routine upgrade can bring all the hassle!!
I will give these guys a call to see what they say.
I guess I found the cure for it. I plugged the phone into the power and after a while (5 min or so) the screen turned all white (the same as all pink and all purple thing which if one notices can see the very blurry shade of the notification bar on top!). I turned it off and try the volume up and down DL mode method, it turned on in the same all white screen, I started the Odin and voila, it passed the setup connection step (cannot relate the connecting to the power with the resolution I got in any way!!!). I got the stock version back now wanna try to root and clean up the mess.
Chrs,

[Q] I "CAN" get into download mode, wont stay though

So I've been on this forum 24/7 for the passed 4 days since my phone bricked. Never tried putting any roms or anything on the phone, all stock. It just crashed on me. This is exactly whats happening:
I put the battery in, and as soon i do that, the samsung logo appears, then goes blank, only to reappear, and so on. I don't even have to press the power button it just automatically turns on. So eventually while searching the forums i followed laymans tutorial on how to make a jig, so i did. I thought i had it! But as soon as i saw download mode come up, it just went right back to a blank screen within 3 seconds, only to see that damn samsung logo. So I'm just curious, am I royally screwed?
Would love some input on this as i cannot find anything >.<

[Completed] [Q] Sprint Galaxy S5 Sport Brick? Bootloop.

I wanted to solve this problem on my own but after almost 6 hours I just can't figure it out. Its either totally bricked or I'm just missing something simple. I've seen many people complain about this problem but none of them seem to have had the same problem I do. Thing is I was just really starting to love the way I had the phone set up. DAMN!
I used this thread to root: (CF)
http://forum.xda-developers.com/sprint-galaxy-s5/help/q-root-galaxy-s5-sport-sm-860p-t2859473
SPRINT GALAXY S5 SPORT SM-G860P
Android 4.4
I had CW recovery installed
(wish I had more info about the software)
Here's whats happening:
START
(vibrate)
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
(Also on Screen are the logos)
Samsung Galaxy S5 Sport
Powered by Android
This stays on for about 10 seconds.
Then blank screen (2 seconds)
(vibrate)
Screen still blank (2 seconds)
REPEAT (Auto reboot and goes back to start)
Other notes:
Trying to boot into recovery (home+vol up+power) Nothing Happens
Try to power off and nothing happens.
Pulled battery, did the 30 sec and restarted no change.
I have all updated usb drivers.
Odin will not see the device because its not on long enough. (Kies didn't see it either.)
Plug into PC via usb - Nothing Happens, device doesn't even show up because its not on long enough (win 8.1 and 7)
Pull battery to get it to stop, once battery goes back in, it auto starts again.
I TRIED AS MANY SD CARD / BATTERY/USB CABLE/POWER CABLE/BATTERY PULL/BUTTON COMBINATIONS AS I COULD FIND ONLINE AND THEN SOME. No Luck with anything.
I know this isn't a "help desk" I just wanted to give as much info as possible hoping to help you help me!
Please point me in the right direction.
Thanks!
Try to hard-reset your phone. There is a button combination for that., search it over the internet.
Thanks for the reply.
Unfortunately the hard reset combo does nothing. I've tried every button combination that I have been able to find with no luck. Factory reset, hard reset, etc. etc. no luck. I've also searched for a possible "hidden" button underneath the back cover or something of the like...nothing.
hmmmm
At least, it is not hard-bricked. So there is hope.
Have you checked if it is entering the download mode? If not, then try it. You can use this mode to flash file via the PC.
Check this link
It worked! Obviously I didn't search or try as many things as I thought I did. : / I can't thank you enough! wow. Amazing!
Thread closed.

[Completed] Stuck at LG logo on LG L5 II e460

So, yesterday I decided to reboot my phone since it was very sluggish for whatever reason. I think it shut down properly but when it came back on, there was a very interesting problem that had come up - it didn't boot any further than the logo screen, which didn't even play its standard animation; it just stood there with the LED on the home button changing colors (like normal). I left it on overnight hoping the problem would be gone, but to no avail. It still hadn't booted when I woke up. If it matters, the only thing I can boot to is download mode. It doesn't let me get to safe mode or however it's called (the menu you navigate with volume up/down and the power button). Needless to say, I was very puzzled. Then I went on and tried to flash the latest kdz since I thought that would fix the problem. I hoped that would easily fix the problem. But no, it decided to be funny and give me more headache. I tried using this guide: http://forum.xda-developers.com/showthread.php?t=2409308 but after step 20 the LG Mobile Support Tool crashes and I can't continue. Sure thing, I will try the Upgrade Recovery that the tool has built in. It properly detects my phone, the software download and extraction goes smoothly. Then I reach the S/W Upgrade part of the process. The few first seconds everything is fine, but then the bar reaches 5% and just stops. Just like that. Now it's been 8 hours since I began the recovery and no progress has been made.
Can anybody help me? I'm lost here...
rexsis13 said:
So, yesterday I decided to reboot my phone since it was very sluggish for whatever reason. I think it shut down properly but when it came back on, there was a very interesting problem that had come up - it didn't boot any further than the logo screen, which didn't even play its standard animation; it just stood there with the LED on the home button changing colors (like normal). I left it on overnight hoping the problem would be gone, but to no avail. It still hadn't booted when I woke up. If it matters, the only thing I can boot to is download mode. It doesn't let me get to safe mode or however it's called (the menu you navigate with volume up/down and the power button). Needless to say, I was very puzzled. Then I went on and tried to flash the latest kdz since I thought that would fix the problem. I hoped that would easily fix the problem. But no, it decided to be funny and give me more headache. I tried using this guide: http://forum.xda-developers.com/showthread.php?t=2409308 but after step 20 the LG Mobile Support Tool crashes and I can't continue. Sure thing, I will try the Upgrade Recovery that the tool has built in. It properly detects my phone, the software download and extraction goes smoothly. Then I reach the S/W Upgrade part of the process. The few first seconds everything is fine, but then the bar reaches 5% and just stops. Just like that. Now it's been 8 hours since I began the recovery and no progress has been made.
Can anybody help me? I'm lost here...
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
Please post your question here:
http://forum.xda-developers.com/showthread.php?t=2257421
The experts in that thread will be able to help.
Good luck!
Thread closed.

Categories

Resources