So I was able to successfully overclock my phone last night.
Today, after several black screen of deaths, it's no longer OC'd. Not sure if it's the black screens.
I flashed faux's DS kernel .044 on CM7 nightly 174
If you have setcpu make sure you check "set on boot"
fcisco13 said:
If you have setcpu make sure you check "set on boot"
Click to expand...
Click to collapse
It'd be best if the OP waits til they find a setcpu configuration that doesn't cause issues before they set it to set on boot. Until then I'd just start setcpu manually with each reboot.
Oops I forgot to include, I set it to 1.55ghz found stability issues with that, then set it to 1.4ghz. Checked it to "set on boot"
Now it's back to normal and it says the max is 1ghz.
So I can "no longer" overclock. Wow I can't believe I left that out.
Seems like u flashed a new kernel and setcpu doesnt read it. Go to device selection in setcpu choose auto detect and should be fine, I hope
Sent from my LG-P999 using xda premium
I actually didn't flash a new kernel. I didn't flash anything.
Have u tried device selection anyway?
Sent from my LG-P999 using xda premium
Thanks waldano. I restored a backup which changed it from auto detect to tegra. Now I set it back.
Thanks
What should I set my min to?
Sent from my LG-P999 using XDA App
Related
Would setcpu work in this case just to lower clock speed of the phone? I'd like to lower it when the screen is off.
Cheeze[iT] said:
Would setcpu work in this case just to lower clock speed of the phone? I'd like to lower it when the screen is off.
Click to expand...
Click to collapse
yea, if you're rooted, setcpu works without any problems. I have my at 1000 mhz min & max but you can set it however you like
jroid said:
yea, if you're rooted, setcpu works without any problems. I have my at 1000 mhz min & max but you can set it however you like
Click to expand...
Click to collapse
It works, but you have to re run it every boot up, because it gets confused (you'll see an error when you run it after a reboot)
Gotta wait for a real update to it to support the stock kernel correctly.
Setcpu
Anyone successfully using setcpu on the nexus s? Seeing any benefit in battery life?
Sent from my Nexus S using Tapatalk
hah2110 said:
Anyone successfully using setcpu on the nexus s? Seeing any benefit in battery life?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=880968
Mine doesn't wake up when in conservative...
Sent from my Nexus S using Tapatalk
What governor are you using? Per directions of app, I try conservative but the phone never wakes up when using a sleep/conservative profile. Same thing happens with the superpower app with or without OnDemand force.
hah2110 said:
What governor are you using? Per directions of app, I try conservative but the phone never wakes up when using a sleep/conservative profile. Same thing happens with the superpower app with or without OnDemand force.
Click to expand...
Click to collapse
I have the same problem, I've tried a few different setups/governor settings and I still get the same issue. I have to pull the battery to get the phone to turn back on. Also I think the phone actually shuts off, according to an app called System Panel after I rooted and set up setcpu the phone shutoff shortly after I went to bed for the night.
same problem. I set min 100 max 400 for screen off profile, never wakes up.
On the epic, 100mhz is too low for the phone to wake up so 200 is the min
Snce the ns uses a humingbird, that might be the problem too
Try conservative on 200min 1000max and see if it'll wake up
Sent from my SPH-D700 using XDA App
Is that nexus s auto step down the speed automatically?
Sent from my Nexus S using XDA App
jcsmart said:
Is that nexus s auto step down the speed automatically?
Click to expand...
Click to collapse
OS Monitor puts the cpu at 100,000khz - 1,000,000khz and shows it changing so yes stock will do it too. However, what they want to do is make sure that, at certain times, the cpu can't reach its full speed and that stock will not do
there is a new version of set cpu 2.10
did anyone try it?
on 2.04 it was still acting crazy
I was having the same issues with the phone never waking up -even with the most updated version of setCPU- and having to pull the battery to get it back on so I uninstalled. However, I flashed the Team Whiskey ROM with the 1.3Ghz kernel and it has been rock solid since. I've overclocked the processor to 1.3Ghz while awake and using on demand governor with 200mhz min/400mhz max when sleeping. No problems so far.
SetCPU 2.10 works properly on Nexus S
just confirmed, it doesn't show weird numbers anymore
Moved to Q&A
SetCPU help
Hey I just got set CPU and I'm not going to lie I don't understand hhow to use. I messed around without a bit but it would freeze after a while and the screen wouldn't turn on. I don't care about overclocking it all I really want to do is save battery power. Can someone share there setcpu profile Either the info or just the file.
Sent from my Nexus S using XDA App
[Q] SetCPU Instructions
Okay, can someone give me the low-down on how to use SetCPU to it's potential. I'm no noob, but I need someone to point me in the right direction.
I am very interested in a how to as well!
Sent from my Nexus S using XDA App
can someone help?
Everything was fine for awhile...I used to flash many roms and never had this issue. I thought it might have been one rom but then realized that it happened with a few roms...didn't matter which one I flashed. The screen will freeze or the phone will freeze while charging and I need to do a battery pull to get it up again. Does anyone have any clue why this is suddenly happing to me?
My wifes does this
Sent from my ADR6400L using Tapatalk
Hmmm. Are you overclocked? If so, you may want to dial it back a notch.
You could try a fresh flash and wipe as well.
Sent from my ADR6400L using XDA Premium App
lrs421 said:
Hmmm. Are you overclocked? If so, you may want to dial it back a notch.
You could try a fresh flash and wipe as well.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
No I am not overclocked. Happened using Synergy and Gingeritis when it wasn't happening before. I had no issues doing normal setting in speedtweak.sh with interactivex but now even with that it's happening.
Bignev said:
No I am not overclocked. Happened using Synergy and Gingeritis when it wasn't happening before. I had no issues doing normal setting in speedtweak.sh with interactivex but now even with that it's happening.
Click to expand...
Click to collapse
these "hard locks" seem to be related mostly to the GB roms. either the kernel or radio is giving issues. i dont remember having this issue on froyo. I am using the latest synergy nightlys and i can't remember the last time i had one of those hard locks. been a while. am using ziggys kernel and mr2 radio.
[Q] When the screen times out, my Wifi Calling shuts down until I wake it again. I'm running CM 107 with faux's kernel, and am pretty happy with it. I have wifi set to never shut off in advanced settings...is this something I'll just have to live with, or am I missing something?
Sent from my G2X with xda Premium.
EDIT: I found a workaround...sort of. If I disable data, wifi will stay active. Only downside that I can think of is that I won't be able to send/receive mms with wifi calling.
EDIT 2: Nevermind. Still does it.
carltonhimself said:
[Q] When the screen times out, my Wifi Calling shuts down until I wake it again. I'm running CM 107 with faux's kernel, and am pretty happy with it. I have wifi set to never shut off in advanced settings...is this something I'll just have to live with, or am I missing something?
Sent from my G2X with xda Premium.
Click to expand...
Click to collapse
how is it you know wifi calling is off when screen is off. I ask because I use wifi calling al well and have been through most all the roms and have never run into that as far as I know. Also, do you have juice defender or something similar, maybe set cpu has a profile set to lower cpu on screen off and that's causing it?? could be a couple different things. would be helpful to know what apps you have along those lines.
bls2633 said:
how is it you know wifi calling is off when screen is off. I ask because I use wifi calling al well and have been through most all the roms and have never run into that as far as I know. Also, do you have juice defender or something similar, maybe set cpu has a profile set to lower cpu on screen off and that's causing it?? could be a couple different things. would be helpful to know what apps you have along those lines.
Click to expand...
Click to collapse
I've got nothing that would affect the wifi settings. The only thing I can think of is that, maybe, the faux kernel is preset to disconnect wifi at idle periods? If that's a possibility, would I have to dl a CPU governor to determine that?
Sent from my G2X with xda Premium.
carltonhimself said:
I've got nothing that would affect the wifi settings. The only thing I can think of is that, maybe, the faux kernel is preset to disconnect wifi at idle periods? If that's a possibility, would I have to dl a CPU governor to determine that?
Sent from my G2X with xda Premium.
Click to expand...
Click to collapse
I dont want to tell you anything I am not sure about. That may be a possibility. Now that I think about it I do remember seeing the icon pop back up after a few secs of screen on when I was on that rom. your best bet if you get no solid answer is to post it in the kernel thread and Faux himself may see it and Im sure he will answer you if he does see it. You could also PM faux but im sure he prob gets too many to check.
bls2633 said:
I dont want to tell you anything I am not sure about. That may be a possibility. Now that I think about it I do remember seeing the icon pop back up after a few secs of screen on when I was on that rom. your best bet if you get no solid answer is to post it in the kernel thread and Faux himself may see it and Im sure he will answer you if he does see it. You could also PM faux but im sure he prob gets too many to check.
Click to expand...
Click to collapse
Thanks for the suggestion. Incidentally, what are you running?
Sent from my G2X with xda Premium.
I have the exact same problem and I'm using CM7 latest nightlies. When screen goes off, WiFi will switch off, no matter how you set it in the WiFi options.
Payvay said:
I have the exact same problem and I'm using CM7 latest nightlies. When screen goes off, WiFi will switch off, no matter how you set it in the WiFi options.
Click to expand...
Click to collapse
The newest nightly updates the RIL. This may possibly be a fix, but I can't try it until I get home tonight.
Sent from my G2X with xda Premium.
carltonhimself said:
Thanks for the suggestion. Incidentally, what are you running?
Sent from my G2X with xda Premium.
Click to expand...
Click to collapse
Sorry, didnt see this last night. I am running Weapon right now. I really like it. I have had 0 problems with it. The only thing I dont like about it is it wont support any custom kernels. So no OC. Also I cant get Netflix. Its worth having a stable rom though.
Weapon is the only rom that I can get it to stay on with. faux has a new kernel for weapon that has oc I think
Sent from my LG-P999 using XDA Premium App
babyzay said:
Weapon is the only rom that I can get it to stay on with. faux has a new kernel for weapon that has oc I think
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
To all following this thread: babyzay is correct. After flashing every ROM possible, I am certain that this issue is unique to CM7-based ROMS. I am sticking with Weapon and faux's latest, and everything is working great.
Sent from my LG-P999 using xda premium
I've never experienced this issue yet, I'm on Nightly 118.
For some reason whenever i try to change any settings they revert back to default on their own. Ive tried multpile different OC apps n it happens in all of them. This some weird kernel bug?
Sent from my SCH-I510 using XDA
Voltage control or setcpu are good ones to use. There is an option to set it on boot. Also there is a known issue when you plug in the phone to a usb port on the computer it will switch it to ondemand. Make sure you only have one installed. One could be correctly applying it then another switching it back.
Ive tried them both (seperately) n get the same result. I set things up the way i want, hit apply, save it to boot, and within an hour or so it goes back to default. And my phone hasnt bee plugged in to usb in a few days so thats the problem. Whats weird is that this was not always an issue. It started when i flashed the TS PJB combo.
Sent from my SCH-I510 using XDA
I'm using PBJ 0130 with Eclipse v1.3. I'm using SetCPU to overclock to 1300MHz and undervolt accordingly. I haven't had any issues with the overclock/undervolt reverting itself.
So, on every TW ROM with whatever kernel combination no matter what I set my minimum frequency to, it always bumps it back up to 1020 whenever I go back into whatever app I used to set it with. Even if I just flash a kernel or a ROM and I don't mess with it, I look on CPU Spy and it says it's still set to 1020. Also on CPU Spy it says that it operates in frequencies lower than 1020, so it makes no sense. Anyone know anything about this?
Sent from my SCH-I535 using Tapatalk 4 Beta
jakereeves31 said:
So, on every TW ROM with whatever kernel combination no matter what I set my minimum frequency to, it always bumps it back up to 1020 whenever I go back into whatever app I used to set it with. Even if I just flash a kernel or a ROM and I don't mess with it, I look on CPU Spy and it says it's still set to 1020. Also on CPU Spy it says that it operates in frequencies lower than 1020, so it makes no sense. Anyone know anything about this?
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sounds like you have a benchmark apply or something that is over ridding your setting. I know kt has a lock frequency option, maybe look at others?
Sent from my Ktweaked PACmaned SGS3!
Go to the init.d folder and see whats in there and what the settings are. Also do you block mpdecision at boot? What kernel are you using? Try setting your cpu app to delay at boot
Surge1223
It's none of that because it still happens after wiping my phone and everything
Sent from my SCH-I535 using Tapatalk 4 Beta
Used to happen to me too, i solved it by setting system to mount r/w at boot and using only one app to lock my cpu setting and set that app to delay loading a couple seconds on boot. What app do you usually use to mod you min/max cpu settings?
Surge1223
Surge1223 said:
Used to happen to me too, i solved it by setting system to mount r/w at boot and using only one app to lock my cpu setting and set that app to delay loading a couple seconds on boot. What app do you usually use to mod you min/max cpu settings?
Surge1223
Click to expand...
Click to collapse
I usually use trickster mod! What do you mean by setting system to mount r/w at boot?
Sent from my SCH-I535 using Tapatalk 4 Beta
I remember reading a post In synergy rom about CPU revs. And that certain revs you can't mess with the CPU.its some where in the thread.
Sent from my SCH-I535 using xda premium
jakereeves31 said:
I usually use trickster mod! What do you mean by setting system to mount r/w at boot?
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I mean I set a script to launch at boot. I used rom toolbox pros scripter.
Oooh, well I'm back on AOSP and the problem doesn't exist. It only happens on Suckwiz
Sent from my SCH-I535 using Tapatalk 4 Beta