Database Info

[Q] failure after root and tried to recovery

Hi there I have a Nexus S with 4.04 on it, so the other day I followed the instruction online and tried to root the phone, I have phone driver installed, and able to unlock my bootloader, the LOCK STATE is UNLOCKED. and I was able to flash Clockworkmod recovery v5.0.2.0.
But after this step, and I tried to reboot, my phone just stuck at the google logo with the unlock sign at the bottom, and wouldn't do anything afterward. (seems like a root loop?)
I tried pulling off the batt a few times but no good. I am still able to lock and unlock bootloader through cmd.(just like in normal state)
I tried to install factory img as shown in the thread http://forum.xda-developers.com/showthread.php?t=1572307. but when I type in the first line "adb reboot bootloader", it says adb devices not found.
so, any idea on how I can restore back to the factory img?
bootloader version i9020xxkl1
model GT-i9020T or if any more info is needed I will be here.....>.<

Did you correctly installed the recovery?
Hi.
First at all let me tell you that I'm not an expert. So, I understand that you should double check this.
I think that you should try to:
- If you have successfully installed the ClockworkMod recovery, you should turn on the device on recovery mode. Vol up + on pushbutton to go inside bootloader. Going down with Vol down, go to recovery and select with on pushbutton.
- Download the correct superuser app for your version. I would double check the md5sum of the file that you have downloaded on your computer.
- Mounting the usb storage of the device on your computer, add the superuser app on /sdcard.
- Umount the usb storage.
- Flash the superuser app, installing from /sdcard from your recovery menu.
- Download a custom kernel on your computer, once that you are unlocked. I'm using CyberGR, and I'm happy with it. You can see all the intallation instructions in the Nexus S development part.
- I that works, I would try to install the kernel in a clear way. For installing the CyberGR ROM, you need to wipe everything and format all. After that, you mount the device on the computer, and try the installation.
Then, if everything is ok, the device will turn on.
Again, I'm not an expert, and I don't know how you can be in contact with the developers that are posting in the developers area. I'm not responsible if your device doesn't works or get bricked.
However, I understand that all that I have described, should not put your device in a worst situation.
And is it doesn't turn on, if it doesn't do anything, then, you can use the linux tooll for bicked devices explained on the developers area.

Is my Xoom bricked?

Hey All,
I know there are a lot threads like this on here, so I made sure I tried everything possible before asking for help.
First off, It is a MZ604 wifi version.
Ok, upon powering up my Xoom, it will get to the Motorola screen/ dual core and stall.
I am able to get into recovery, however the version I am running, 5.8.3.1 apparently does not allow sd card mounting, so I am unable to restore or flash a new rom.
A factory reset/ data wipe does nothing.
I have tried to flash a new rom via ADB, however my computer will not install the Xoom drivers. It will say "installing device drivers" for about 2 minutes or so before failing. I have tried using moto helper and the other Motorola usb drivers
I am unable to boot into android to enable usb debugging
I have tried all of the above on my laptop too and to the same result.
My question is, is this a brick? or can it be solved.
Thanks for your time

Yes it can be fixed, if you can access recovery then it means you can access fastboot. So what you do is once you're in the fastboot protocol, is flash in TWRP recovery http://forum.xda-developers.com/showthread.php?t=1782235
With that recovery you can mount SD cards, so use a computer to download the ROM you want then flash. Hopefully you get the idea, but I can post in more detail if you want.

Chaosgod27 said:
Yes it can be fixed, if you can access recovery then it means you can access fastboot. So what you do is once you're in the fastboot protocol, is flash in TWRP recovery http://forum.xda-developers.com/showthread.php?t=1782235
With that recovery you can mount SD cards, so use a computer to download the ROM you want then flash. Hopefully you get the idea, but I can post in more detail if you want.
Click to expand...
Click to collapse
Thanks for responding, I appreciate it. The thing is that my xoom cannot connect to my computer, and therefore and cannot use fastboot to send it the image correct?
I could fix all of this if I could just get the drivers to install, but because of my xoom's condition, the drivers cannot install no matter what.

Hmm usually fastboot drivers should automatically install. Does your recovery have an option to boot into fastboot? Once you're in fastboot it should automatically install the drivers, and in the android sdk folder in CMD (assuming you're running windows) put in this command: fastboot devices
It should show up your XOOM if not install this http://www.motorola.com/Support/AU-EN/Support-Homepage/Software-and-Drivers/USB-PC-Charging-Drivers
And try again

Hi all!
I got the same problem...
I can connect it to PC and do fastboot, I've flashed it many times, but it didn't affect my Xoom, i've reflashed the recovery to a lower version (tiamat rc4) but the recovery still shows version 5.8.3.1...
I even tried RSD, but it still the same...
no errors, and no effects...
is my Xoom bricked?

^I heard of this before, sounds like your new recovery image just gets overwritten by the current recovery. Though I thought it was only for stock recovery.

but, how can I overwrite it? it seems like they are read only...

It's all about timing, to access recovery once you see the Moto logo wait 2-3 seconds then vol + then vol + again. This is right after you flashed in your new recovery.
You can also access your fastboot like that as well, instead of pressing vol + again, press vol - then vol +.

Chaosgod27 said:
It's all about timing, to access recovery once you see the Moto logo wait 2-3 seconds then vol + then vol + again. This is right after you flashed in your new recovery.
You can also access your fastboot like that as well, instead of pressing vol + again, press vol - then vol +.
Click to expand...
Click to collapse
that's not the problem... of course I can access the recovery, fastboot and RSD, the problem is that I whatever I do to the xoom just don't work... and it reports no error at all... it's just succeed, but nothing happened... It's like a PC running windows with DeepFreeze installed...
Anyone got the same problem? can anybody help me?:crying:

No you're missing the whole point, after you flashed your new recovery it may get overwritten if you don't reboot into recovery straight way. It never happened to me but I have read that people has that issue.

[Q] Asus bricked, wiped system and data, no fastboot, working adb, cant mount sd card

First things first, I am using the SL101 but as I could not find a place for that, I figured this is the best place for this post.Also I hate posting and creating new threads but there is absolutely no other thread like this, I have been searching for 3 days.
So I rooted my SL101 using vipermod with ease, then downloaded ROM manager but I think here is where I hit an issue, When cwm was installed it asked for me to confirm my device and the only device available to click was "Asus Transformer". As every other transformer tf101 firmware has worked on my tablet, I thought it would be fine. Then I was in the process of flashing Revolver 4.2.1 and my battery went flat so that was not ideal and this is when the issues began.
I booted into cwm recovery (vol- + power and then vol+ on the splash screen) and tried to "install zip from sdcard", I got the "Cant mount sdcard" dialog. I then rebooted and tried to flash the rom from ROM manager, when it rebooted, cwm went through a 20 second loop waiting for sdcard, and it did not find the sdcard so the operation was aborted. I tried a factory reset through cwm and when it rebooted, I would get the splash screen and the ASUS logo with the spinning dots loading, but it would not go past that (bootloop?). From here I could not access the OS at all.
Again into cwm and used the peri OneClick R&R Easyrecoveryv0.4. It went through all the unbricking dialog with three reboots, but one of the commands said it could not find "sdcard/recoveryblob". The system still did not work. I then put it into APX mode (vol+ and power) and installed the APX driver, used the download.bat method but the minute it opens commandprompt, it immediately disconnects the APX driver, the tablet remains in APX mode. This method did not work.
Somewhere along the lines I also managed to format the system and data so not when I turn it on it just goes into the splashscreen with the EEEpad logo and nvidia Tegra.
Also tried adb push to push revolver rom onto the system /sdcard/ directory, that works fine but then again it cant mount sdcard so I cant actually do anything with it. adb devices lists the device as 0123456789ABCDEF recovery. Finally I did try boot twrp.img using fastboot with the "fastboot boot twrp.img" command but it hangs on "waiting for device". fastboot devices also does not list any devices.
So I basically have a tablet whose cwm cant mount sdcard, adb works, fastboot doesnt see the device and I can only go onto cwm on the tablet or splashscreen. Can somebody help me out? I have spent a long time trying to fix this.

Fixed
Hi again, sorry for the double post but after posting that I realised the answer was pretty much staring me in the face and now this has been fixed. so this thread can be closed by the bigdogs.
For future reference to anybody who has this or a similar problem, especially if you format the system and fastboot is not working, the issue is cwm v6.0.1.3 (cant mount sdcard issue), I used the PERI oneclickrecovery v0.4. The unbrick selection did not work for my slider as I had already pretty much wiped any data from the system that could have been salvaged by the unbrick, but if you press "r" in the main menu it flashes a new recovery tool over cwm, and this new tool can access external sdcard so just upload the rom zip file onto there and flash. :fingers-crossed: Revolver 4.2.1 is now flashed and working. :victory:

[Q] [A510] Just stopped working (can boot into CWM)

Hi guys,
My A510 just turned itself off with no apparent reason. Now I'm experiencing the following, looping :
- It tries to boot,
- freezes on the boot logo (previously "NoThrills", now "Acer"),
- vibrates and reboots.
I can boot in recovery (CWM). When I do, CWM apparently can't access the logs. Here's what I tried :
- wiping everything (data, cache, dalvik)
- restoring Nandroid backup (it was previously a NoThrills JB, now it's back to a stock JB) but I get an error when it tries to restore /data ("Error while restoring /data!").
My computer doesn't detect the tablet when it's plugged in... so I think I can't push or adb anything.
I guess it might be a hardware problem, but does anyone have any idea ? Maybe I could try to diagnose the problem?
Thanks a lot!

You can try to put a full update.zip on your sdcard, and flash it with your recovery
(a custom ROM or a full Acer Stock ROM)
You can also try to format every partitions via fastboot and then, reflash a proper ROM

Hey Shreps,
Thanks for your answer.
- I tried flashing NoThrills' CM10 from the external SD card, it didn't throw any error (although it skipped formatting the boot partition as well as extracting the files to the data partition, I don't know if it's a valuable information or not). Now instead of having the Acer logo during boot, the screen is doing weird stuff and it still won't boot. I can still boot into recovery though.
- I'm not sure how to use fastboot on this device. I get the option to boot into fastboot on my Moto G, but not on my A510. Do I need to flash a more recent CWM to enable it?
Thanks!

Boot in Fastboot via physical button http://forum.xda-developers.com/showthread.php?t=1747802

Thanks!
Volume down + Power on + Rotation switch got me to a black screen with the Acer logo and the following on top :
"Bootloader Version JB-d0ca683 (Unlock Mode)" -> that's normal
"Bootloader VJB-d0ca683(UnlockMode): Starting Fastboot USB download protocol" -> It's stuck there and I'm not sure it completes the operation.
My PC doesn't detect the A510, and "fastboot devices" returns nothing in the terminal.
Any idea?
Thank you!

Ghoorg said:
Thanks!
Volume down + Power on + Rotation switch got me to a black screen with the Acer logo and the following on top :
"Bootloader Version JB-d0ca683 (Unlock Mode)" -> that's normal
"Bootloader VJB-d0ca683(UnlockMode): Starting Fastboot USB download protocol" -> It's stuck there and I'm not sure it completes the operation.
Click to expand...
Click to collapse
That's normal/ok
Ghoorg said:
My PC doesn't detect the A510, and "fastboot devices" returns nothing in the terminal.
Any idea?
Thank you!
Click to expand...
Click to collapse
Should work, try to proper install the Acer drivers & check your USB Cable/port
"fastboot devices" should return a device with its ID

Still no luck after reinstalling the acer drivers... I think some components may be fried at this point?

There's something I'm wondering, it seems I can't mount anything from my pc but I can see files and folders from CWM. Is there any way I could copy everything on the external SD card that's in my A510?
Thanks!

Reply
Ghoorg said:
There's something I'm wondering, it seems I can't mount anything from my pc but I can see files and folders from CWM. Is there any way I could copy everything on the external SD card that's in my A510?
Thanks!
Click to expand...
Click to collapse
With the Tablet in CWM Recovery you can do a Backup on an SD Card
search for cwm recovery backup on the net
lists you the possibilities.
I had the same Problem, fastboot did not list my device because the mode was for receiving data only. But you can try this:
Tablet off.
Enter the Fastboot Commands in the Command-Line
Then turn your tablet in fastboot-mode.
Good luck.

Honor 8 Can't Download Firmware, Can't Flash, Bricked? [Solved]

Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)

Download the 70mb package for firmware downgrade and the latest marshmallow firmware from your regional huawei's website.
Extract the small package and put the .app file in a folder called dload on the SD card and insert it in your phone.
Boot by holding volume + volume - and pressing power, holding all 3 buttons until the phone vibrates.
The package will flash and afterwards you repeat the process, this time using an .app file from the full marshmallow firmware.
The 70mb package installs not matter how messed up your file system is, and makes your phone ready for the MM firmware. This process brings any brick back to life. Good luck.

I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.

menriquez said:
I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.
Click to expand...
Click to collapse
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563

sysak said:
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Click to expand...
Click to collapse
This is truly one of the worse phones I have ever had when it comes to root and such. My frustration over what, for a unbranded unlocked phone that *should* probably SHIP with root, this phone has and is putting me through is super high.
That being said...so I flashed the new 3.1.0.0 recovery. Before doing that, I had just tried to Unbrick the phone with flashing B162 image with 3.0.3.0...so now the phone is totally frozen in the "Your device has been unlocked and can't be trusted..." screen. Nothing I seem to do can get it out of this mode.
I want to install the rooted b378 boot.img file I just downloaded, but am unable to find the button commands to get the bootloader loaded. Does anyone have any suggestions in somehow trying to save the day with this damned phone?
much thanks in advance.
EDIT: So I got the phone in bootloader mode by pressing vol up/vol down/power and inserting the usb cable...i flashed the rooted boot.img and twrp 3.1.0.1 to both recovery and recovery2 and now i can get into recovery. I feel like I may actually have a chance now to fix this damn thing...
So can anyone point me in a direction where, from this point with the new recovery loaded and the modded boot image installed, where i can get this phone working?? ill use ANY ROM it dont really matter at this point...

Don't worry. It's really easy, once you know what to do, just realy easy to screw up if you don't. If your phone is a mess just roll back to android 6 using the procedure i described above. Once your phone works, update to nougat and install twrp and root following this guide: https://forum.xda-developers.com/honor-8/development/twrp-t3566563

Same issue
Ramonator said:
Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)
Click to expand...
Click to collapse
I pretty much have the same issue. No keyboard showing, just the stupid voice thing, and the Bootloader is Relocked. How did you get it fully unlocked. I can't get it. I guess let me get that resolved first (the bootloader) and I can try to go from there. Please help me.
UPDATE: Never mind I fixed it. I'm not really for sure how either but I think it mainly was just persistence.

Didn't work
Hello, so earlier today I tried to install RROS newest version in hope to get magisk/unrooting my phone because I'm addicted to snapchat and I rooted my phone with SuperSU earlier but didn't know u can't login to snapchat after that. It failed idk why, (I followed instructions very clearly and searched info from internet before doing that) causing me to brick my phone so when I booted it, it only showed black screen. After couple hours not finding way to get into twrp with my circumstances I managed to flash boot, recovery and system images, I tried to reboot and see what happens, (just in case, I kinda knew I didn't had ROM installed at the time, I also was hoping RROS to boot) nothing happened expect my phone got stuck in boot screen for booting EMUI, which was not installed obviously. Again after couple hours I stumbled to your post and managed to finally get myself into TWRP, I followed again ur instructions and everything was going fine, no erros, not anything. When Gapps was finished installing, I rebooted and again it just got stuck into booting screen. I did press and hold Power button, vol+, vol- and got myself into some kind of ROM installing screen, (hard to explain I don't exactly know what is name of it) and no it wasn't Huawei erecovery screen (Power button & Vol+ and no it didn't work me either saying that "getting package info failed") so in that ROM installing screen it just was stuck at 5% installing, and now I don't know what to do. My phone got locked again and I'm stuck at booting screen.
Note:
I don't have SD Card, should I get one and install stock rom?
Sorry for being kinda unclear but I'm tired it was 7 hours ago I got my phone bricked and have surfed on the web finding for answers ever since.
Also as you might notice, yes, I'm new to modding devices etc but still I'm not totally noob. Please help ASAP.
[SOLVED] So after hour of watching netflix as depressed teen I tried to reboot my phone again just in case, got stuck in booting screen. Then I held Power Button + Vol+ and got myself into EMUI stock recovery mode, I chose wipe cache partition and wipe data/factory reset, after that I rebooted my phone, it was stuck in booting screen for like 2 minutes but then it actually finished booting and now my phone is again functioning and god bless locked & unrooted.