- This is pretty much an exact duplicate of a thread I posted on Xoomfoums, but I think it maybe better here...
Anyway, really looking for a miracle!! I got my xoom back from Moto yesterday for the 4G upgrade and I tried to root the device the same way I have done before. I got as far as unlocking it. The last thing I flashed was a “bootloader_patch” from a guide on Xoomforums. Now I’m stuck and I only found one person who had this issue …… he returned his device for a new one
So summary thus far.
- I can get into Fastboot support and flashing always yields “success”.
- I seem to have no ADB connectivity. (don’t know if I really need it for fixing this issue since I can fastboot and flash).
- I have tried, stock images, CWM recoveries, rogue recoveries, also some HLK75 imgs, etc!! All leave me at the same place.
Where am I stuck:
- I reboot and let it go normally and she hangs at “Moto screen”
- I reboot and tap the “volume down” leaves our three choices….
-- Android recovery -> tried to enter recovery and sits at the famous “Reading ODM fuse:1”
-- Fastboot -> That works, I can flash from here OK
-- RSD support -> Haven’t played with that, I have read people going to dark places when they screw with this. If I have to I’ll do so carefully.
All the methods of going back to OEM are epic fails. Nothing new happens, but I am always left with the same result.
Any help you could lend would be greatly appreciated!! I really would rather truck through this than return it however I’m afraid if I don’t get rid of it soon it will be harder for me to make an excuse to the retailer.
Thanks - John
jadkar said:
- This is pretty much an exact duplicate of a thread I posted on Xoomfoums, but I think it maybe better here...
Anyway, really looking for a miracle!! I got my xoom back from Moto yesterday for the 4G upgrade and I tried to root the device the same way I have done before. I got as far as unlocking it. The last thing I flashed was a “bootloader_patch” from a guide on Xoomforums. Now I’m stuck and I only found one person who had this issue …… he returned his device for a new one
So summary thus far.
- I can get into Fastboot support and flashing always yields “success”.
- I seem to have no ADB connectivity. (don’t know if I really need it for fixing this issue since I can fastboot and flash).
- I have tried, stock images, CWM recoveries, rogue recoveries, also some HLK75 imgs, etc!! All leave me at the same place.
Where am I stuck:
- I reboot and let it go normally and she hangs at “Moto screen”
- I reboot and tap the “volume down” leaves our three choices….
-- Android recovery -> tried to enter recovery and sits at the famous “Reading ODM fuse:1”
-- Fastboot -> That works, I can flash from here OK
-- RSD support -> Haven’t played with that, I have read people going to dark places when they screw with this. If I have to I’ll do so carefully.
All the methods of going back to OEM are epic fails. Nothing new happens, but I am always left with the same result.
Any help you could lend would be greatly appreciated!! I really would rather truck through this than return it however I’m afraid if I don’t get rid of it soon it will be harder for me to make an excuse to the retailer.
Thanks - John
Click to expand...
Click to collapse
When it sits at "Reading ODM Fuse1" can you press power to see if it will select that option and take you into CWM recovery (assuming you have that installed)?
When you say you are flashing from fastboot protocol, are you connected to your pc? What are you flashing? I'm a bit lost with your description...
^^^
Thanks for the reply. Good suggestion on the power button.. press as its sitting at "Reading ODM fuse:1" but....... not good
So I didn't list all the things I have flashed because I tried many many fixes from multiple guides. I could look through all the links if you want the exact names but none of the made a difference. Yes, flashing from my PC connected via USB.
So after the first root guide blew it up I tried to flash a bunch of recoveries and system images. I also tried to bring her all the way back to OEM using the appropriate guide. No matter what I flashed I was given a successful message but it still gets stuck at the same screens. Nothing gives me any different results. I'm wondering if the actual bootloader is hosed. If so can you flash a new bootloader?
Here's some stuff I have flashed along with some links....
recovery-Tiamat-R4c-100611-1150-cwm.img
MZ600_HRI66_OEM_Image
how to root guide that I origianlly followed.... http://www.xoomforums.com/forum/mot...ow-root-3g-4g-wifi-only-xoom-stock-3-1-a.html
Someone got the build img after the LTE upgrade, so I tried this....
http://www.xoomforums.com/forum/xoo...rade-stuck-recovery-reading-odm-fuse-1-a.html
I also tried from fastboot erasing all the partitions before I flashed them and that didn't help.
Thanks for your time!!
jadkar said:
^^^
Thanks for the reply. Good suggestion on the power button.. press as its sitting at "Reading ODM fuse:1" but....... not good
So I didn't list all the things I have flashed because I tried many many fixes from multiple guides. I could look through all the links if you want the exact names but none of the made a difference. Yes, flashing from my PC connected via USB.
So after the first root guide blew it up I tried to flash a bunch of recoveries and system images. I also tried to bring her all the way back to OEM using the appropriate guide. No matter what I flashed I was given a successful message but it still gets stuck at the same screens. Nothing gives me any different results. I'm wondering if the actual bootloader is hosed. If so can you flash a new bootloader?
Here's some stuff I have flashed along with some links....
recovery-Tiamat-R4c-100611-1150-cwm.img
MZ600_HRI66_OEM_Image
how to root guide that I origianlly followed.... http://www.xoomforums.com/forum/mot...ow-root-3g-4g-wifi-only-xoom-stock-3-1-a.html
Someone got the build img after the LTE upgrade, so I tried this....
http://www.xoomforums.com/forum/xoo...rade-stuck-recovery-reading-odm-fuse-1-a.html
I also tried from fastboot erasing all the partitions before I flashed them and that didn't help.
Thanks for your time!!
Click to expand...
Click to collapse
Well, you are flashing wildly but not well, (JK)
This thread should help you:
http://forum.xda-developers.com/showthread.php?t=1299485
Here is a great post by Saintfyre (I think it fits the bill):
"Yeah join the FUBAR Club.
I was in the same boat as you did the same thing.
I now have my Xoom back to HLK75C and have 4G/3G and Wifi connectivity again so all is not lost!
What I did to fix my situation:
-I wiped the Device and just went through Solarnz's Root Method here: http://forum.xda-developers.com/showthread.php?t=1074979.
-Download the HLK75C (This is the build the 4G Xoom's shipped back with) file that AceXMachine provided here, post #6
-Extract the File to your Android SDK Platform-Tools folder, password is AceXMachine
-Follow his instructions to apply the images. I copy pasted but all credit goes to him for putting this out there.
On Windows shift and right click the Platform-Tools folder -> Open Command Window here.
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase cache
fastboot reboot
After following all of this I had my Xoom back just like it had come back from Moto after the upgrade. I've since then flashed the Tiamat Tachi OC GPU Kernel to have Overclocking again. No issues since then, have full 4G/3G Connectivity and Wifi has no issues as well."
From this thread:
Yup.....I tried that one as well, it didn't work either.
I really think the bootloader is shot. Is there a way to repair it? I think what killed this was the last .zip file I updated as part of the root guide I was using, it was "bootloader_patch.zip" found here..... Bootloader_patch Does anyone know what this does??
**edit: Is the boot.img the bootloader?? If so ... forget it as I already tried flashing a couple new ones during my attempts to bring it back to OEM.
So my logic now is rather than keep flashing like crazy let me try and get recovery working. For this I will try and erase everything using fastboot (my only option) and then flash a boot.img and a recovery.img
Questions:
- Will keeping everything earsed from the device except for a boot.img and a recovery.img allow me to get into recovery? I want the minimum amount of partitions flashed. I want to just work slowly and systematically trying to get into recovery first.
- I do not have ADB support, can this be a hint? Shouldn't adb support be working or do you need to have somthing in the system / app partition for ADB to communicate with. I know its called Android debugging bridge so the name makes me believe that I need an android OS loaded and this is why my ADB doesn't work.
Please take a look below and let me know if anyone has any suggestions on different boot.img or recovery.img Ihave not tried. Also, I'm wodnering which ones I should try in combination.
Going forward I'm going to keep track of each combination I try as to avoid duplicated / wasted effort.
recoveries I have tried:recovery-Tiamat-R4c-100611-1150-cwm.img
recovery image from steady Hawkin (3g/4g Stock Images for HR166)
Rogue-recovery image from rogue-recovery-1.2.0
Boot images I have tried:boot from steady Hawkin (3g/4g Stock Images for HR166)
boot from AxeMachine HLK75Csystemboot
boot from AxeMachine HLK42Bsystemboot4g
jadkar said:
So my logic now is rather than keep flashing like crazy let me try and get recovery working. For this I will try and erase everything using fastboot (my only option) and then flash a boot.img and a recovery.img
Questions:
- Will keeping everything earsed from the device except for a boot.img and a recovery.img allow me to get into recovery? I want the minimum amount of partitions flashed. I want to just work slowly and systematically trying to get into recovery first.
- I do not have ADB support, can this be a hint? Shouldn't adb support be working or do you need to have somthing in the system / app partition for ADB to communicate with. I know its called Android debugging bridge so the name makes me believe that I need an android OS loaded and this is why my ADB doesn't work.
Please take a look below and let me know if anyone has any suggestions on different boot.img or recovery.img Ihave not tried. Also, I'm wodnering which ones I should try in combination.
Going forward I'm going to keep track of each combination I try as to avoid duplicated / wasted effort.
recoveries I have tried:recovery-Tiamat-R4c-100611-1150-cwm.img
recovery image from steady Hawkin (3g/4g Stock Images for HR166)
Rogue-recovery image from rogue-recovery-1.2.0
Boot images I have tried:boot from steady Hawkin (3g/4g Stock Images for HR166)
boot from AxeMachine HLK75Csystemboot
boot from AxeMachine HLK42Bsystemboot4g
Click to expand...
Click to collapse
How have you flashed zip files without ClockworkMod recovery? It's hard to brick a Xoom but you may be close.
If there is anyway to flash your device's stock images through fastboot, that is your best hope at this point.
okantomi said:
How have you flashed zip files without ClockworkMod recovery? It's hard to brick a Xoom but you may be close.
If there is anyway to flash your device's stock images through fastboot, that is your best hope at this point.
Click to expand...
Click to collapse
Yeah, so I have another thread running on xoomforums and I have explained over there that just about 30 minutes ago I erased everything and reflashed the "HRI66" files. I used everything from that build so there was just the stock recovery, etc. I even did a fastboot oem lock. This didn't work either.
After this I was able to return to fastboot and "unlock", so now I am just back to where I was before.
Me and one other dude think I have a corrupetd / damaged partition or semi-destroyed bootloader. The thing is I can't get an answer to a real simple question.....
is the bootloader a "flashable" component?? I'm not sure if the boot.img IS the bootloader or the bootloader is something else that's not flashable at all. If the later is true then maybe my bootloader is FUBAR.
Thanks!! John
I'm the other guy jadkar was referring to from Xoomforums. He's pretty much put it succinctly but here's my version
ggrant & fish over at Xoomforums suggested we PM solarnz (etal) or post over here for help. I am writing this for myself and another Xoom user. We've both sent our Xoom's to Moto for the 4G upgrade, received them back with 3.2.2, and then proceded to root the wrong ROM over the top. The result was a hang at the red Logo. In hindsight, we should have used Universal Root.
We've both exhausted the experience at Xoomforum (hence our plea here Anything you can suggest would be most appreciated. Personally, I think something is awry in the recovery partition size (perhaps changed by Moto at the upgrade?):
To save the basic suggestions off the bat, we've done the expected already: Installed moto's drivers, tried new cables, AND an entirely different computer. We've tried completely erasing boot, system, recovery, cache and userdata partitions, and flashing back the stock HRI66 images with fastboot.
ADB doesn't recognize the 'devices' command, only fastboot see's the Xoom. Accordingly, the only way to get into fastboot protocol is to Vol Up + power, and wait the three seconds and toggle. We can both toggle (with Vol) into Recovery, RSD and Fastboot). After flashing MULTIPLE flavours of Recovery images, the result is always the same: Recovery hangs reading fuse: 1. There's never the Recovery menu or graphic of the the Droid robot.
As for RSD, I've tried all the way through RSD Lite 5.0 with the thought of using solarnz' (I think) recovery.SBF. The result there is always the same as well: By toggling into RSD mode (Vol+Power into RSD), RSD Lite see's the device OK, but shows an error stating initialization values cannot be read. Note this occurs immediately upon plugging the Xoom in, even before TRYING the SBF file, which BTW, fails even if you try.
Via fastboot, we can oem lock and unlock (note however that in the command window, it states that it failed due to too many links, the the action seems to have worked on the Xoom anyway.)
So, it's down to THIS; the common thread for both of us is that we cannot successfully get into recovery, no way, no how. Again, ADB won't recognize the Xoom, only Fastboot
Any help would be APPRECIATED!
P.S. John, if we don't get help here, I have a 9mm with two spare rounds (for the Xoom's, not us!)
^^^
Thanks .... we'll see if anyone bites.... I hope so
As for the 9mm ........ Thanks but I have a flight this morning and I'm seriously thinking about dropping the Xoom out my plane from lets say 3500ft!!
LOL! Safe flight.
Guys, you all are crazy!
I appreciate your resourcefulness, but it sounds like you're almost out of options, lol.
If you can get to 'starting fastboot protocol' you are not bricked. If you cannot connect your Xoom via adb while your Xoom is in fastboot, it usually indicates that there is something wrong /missing from your setup.
Are you sure you have all your moto drivers installed and the proper image files in your platform tools (or tools folder) and you are actually in the right directory when opening the command window?
Please try to follow the instructions in the following
thread before you commit mayhem on your innocent Xooms.
http://forum.xda-developers.com/showthread.php?t=1249798 for setting up everything you need to ensure that adb will work and a proven method to install cwm recovery and root once you have been able to get back to a proper stock image. What I can't find at this moment are the 4G stock image files. You need the following to flash through adb/fastboot: system.img, boot.img, recovery.img, and userdata.img.from the Honeycomb 3.2.2 4G Xoom.
Commands to use:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot reboot
Don't give up...good luck!
Found out another guy tried 2 different PC's and it did the same thing. He even reloaded android sdk. He decided to try a 3rd PC that he had to load sdk to. It worked! So he found there is an issue somewhere with his 2 PC's sdk or windows install. When I got my xoom in June sdk would see it, but I never rooted at that time. However I did update and install all the new stuff for sdk.
Sent from my Xoom using xda premium
okantomi said:
Guys, you all are crazy!
Click to expand...
Click to collapse
Probably... That's half the fun!
okantomi said:
Are you sure you have all your moto drivers installed and the proper image files in your platform tools (or tools folder) and you are actually in the right directory when opening the command window?
Click to expand...
Click to collapse
Most assuredly. I develop Android apps with Eclipse. I know how to use SDK.
okantomi said:
Please try to follow the instructions in the following
thread before you commit mayhem on your innocent Xooms.
http://forum.xda-developers.com/showthread.php?t=1249798
Click to expand...
Click to collapse
Too late, mayhem already commited!
okantomi said:
What I can't find at this moment are the 4G stock image files.
Click to expand...
Click to collapse
That would be the ONLY thing we haven't tried. I know how to lock/unlock, flash images, etc. We've both done all of your above instructions to the letter. I've already replaced my Xoom and it's at Moto having 4G surgery, so I can't do any more of this now. John will have to try again, but as (I hope) you've already read above, the status quo techniques are not working.
Any clues about why a successfully flashed recovery image isn't working?
okantomi said:
..... If you cannot connect your Xoom via adb while your Xoom is in fastboot, it usually indicates that there is something wrong /missing from your setup.
Are you sure you have all your moto drivers installed and the proper image files in your platform tools (or tools folder) and you are actually in the right directory when opening the command window?
Please try to follow the instructions in the following
thread before you commit mayhem on your innocent Xooms.
http://forum.xda-developers.com/showthread.php?t=1249798 for setting up everything you need to ensure that adb will work and a proven method to install cwm recovery and root once you have been able to get back to a proper stock image. What I can't find at this moment are the 4G stock image files. You need the following to flash through adb/fastboot: system.img, boot.img, recovery.img, and userdata.img.from the Honeycomb 3.2.2 4G Xoom.
Commands to use:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot reboot
Don't give up...good luck!
Click to expand...
Click to collapse
Lots of stuff to answer back here, please don't mind the bullet points....
from your guide... "Did your device not show up? Make sure that you have USB debugging enabled in Settings/Applications/Development on your Xoom."
- I have no devices connected when typing ADB devices and based on the above how can I make sure I have USB debugging enabled if I can't even get to the Android OS??? I have fastboot support that's it, I don't think its possible for me to get ADB to connect with all the partitions erased. ADB or "Android Debugging Bridge", the name implies you NEED android on the device to use it. I don't have android since the system partition was erased.
- I have two different 4g images from AceXMachine's posts. However his build posts only have system.img and boot.img. So based on your instructions I need to know what userdata.img and recovery.img I should use.
- I keep asking and I will continue until I get an answer on the next question..... I think the bootloader is screwed up. I want a new one (or at least the one that came from my 4g upgrade). Where can I find one? How do I flash it? Is this synonymous with the boot.img?
Thanks!!!
Well, your issues are way, way, way beyond the scope of my limited knowledge, lol!
Have you tried to chat with the developers on #Xoom on freenode.net? Bigrushdog and solarnz are both really nice and so is SteadyHawkin, if he's on there. Someone may be able to help.
Good luck!
Flash it back to stock moto!!!! Then start over with bringing your xoom to 3.2.2!!!! That is why you can't get anywhere! You keep killing off everything! AceXMachine did the same as you and he has his xoom back to 3.2.2. Or send it to moto and pay them to flash you back. You are not doing it right period! You have posted the same issue and people have tried helping, but you seem to want to keep going into rsd and other crap you don't need. The baseband is in the boot.img. Flash the hir66 then update to the hlk75c.
Sent from my ADR6400L using xda premium
hammer4203 said:
Flash it back to stock moto!!!! Then start over with bringing your xoom to 3.2.2!!!! That is why you can't get anywhere! You keep killing off everything! AceXMachine did the same as you and he has his xoom back to 3.2.2. Or send it to moto and pay them to flash you back. You are not doing it right period! You have posted the same issue and people have tried helping, but you seem to want to keep going into rsd and other crap you don't need. The baseband is in the boot.img. Flash the hir66 then update to the hlk75c.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
mmmkay... well THAT was a little terse. Don't you think returning to the HRI66 stock was the FIRST thing we tried? We downloaded the stock images from the provided links, checked the MD5, and then did this:
adb reboot bootloader
Xoom will then reboot into bootloader screen
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
Use volume rocker to select ok and then xoom will reboot. At this point you should be back to a factory state which includes being locked and unrooted.
Click to expand...
Click to collapse
Isn't THAT what you suggested? Yes? No?
^^Hammer....
I know this threads is really long and probably didn't read all of it (don't blame you) but a while back I explained that I did try and flash everything in Steadyhawkn' HIR66 build. I flashed the 4 images included (boot, system, userdata, recovery) I also went as far as an OEM lock at the end. This did nothing. I tried this a couple times.
Can someone lead me to the patience pool; I need a drink.
Related
I've looked through other posts about this and nothing seems to help. I went to actually UNroot my Xoom so I can install the latest update because I had no use for a root, but when I went to do fastboot flash system system.img with the stock .img file, it takes forever then gives me an error... I don't know how to get past this. I just want my Xoom back to normal, even if I can get it back to a rooted normal I can live with that.
(Also, the first first time I tried unrooting, I realized I used the wrong device files. I used the Verizon ones, when I only have WiFi.)
Somebody please help me, or I feel like I have an expensive paperweight.
Also, whenever I go to restart, I'm stuck at the boot logo screen and no matter which boot.img I flash, it won't go past it.
hocplyr98 said:
I've looked through other posts about this and nothing seems to help. I went to actually UNroot my Xoom so I can install the latest update because I had no use for a root, but when I went to do fastboot flash system system.img with the stock .img file, it takes forever then gives me an error... I don't know how to get past this. I just want my Xoom back to normal, even if I can get it back to a rooted normal I can live with that.
(Also, the first first time I tried unrooting, I realized I used the wrong device files. I used the Verizon ones, when I only have WiFi.)
Somebody please help me, or I feel like I have an expensive paperweight.
Also, whenever I go to restart, I'm stuck at the boot logo screen and no matter which boot.img I flash, it won't go past it.
Click to expand...
Click to collapse
Did you have ClockworkMod recovery installed? If so, do you know how to boot into CWM recovery? Disconnect from thr computer if connected, and press power and volume up to hard reboot and when you get to the dual core image, wait about three seconds, then press volume down and you should see android recovery in upper left corner, then press volume up and press power to select it.
I'm suggesting this in the hope that you did a nandroid backup before you decided to mess around and that you could somehow still access it.
If not, do you now have the correct system image files in your platforms or tools folder in order to flash from fastboot? Can you get to the "starting fastboot protocol?"
Look for your correct 3.2 wifi images here:
http://forum.xda-developers.com/showthread.php?t=1080963
Commands:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
Good luck!
okantomi said:
Can you get to the "starting fastboot protocol" screen?
Click to expand...
Click to collapse
yes if you somehow get into fast boot your problems can be solved.
I do not know whether by pressing vol up at boot time you can go to fastboot protocol screen.
okantomi said:
Did you have ClockworkMod recovery installed? If so, do you know how to boot into CWM recovery? Disconnect from thr computer if connected, and press power and volume up to hard reboot and when you get to the dual core image, wait about three seconds, then press volume down and you should see android recovery in upper left corner, then press volume up and press power to select it.
I'm suggesting this in the hope that you did a nandroid backup before you decided to mess around and that you could somehow still access it.
If not, do you now have the correct system image files in your platforms or tools folder in order to flash from fastboot? Can you get to the "starting fastboot protocol?"
Look for your correct 3.2 wifi images here:
http://forum.xda-developers.com/showthread.php?t=1080963
Commands:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
Good luck!
Click to expand...
Click to collapse
Not sure if I have CWM installed, but I can access fastboot and that's not really helping. I'll try again with the link you provided, but I'm able to flash everything BUT system.img. I'll try again and get back to you.
UPDATE: Yeah... It's doing the exact same thing. It's stuck at fastboot flash system system.img. It just says that it's sending it and it takes a long time before an error message pops up saying that there are too many links.
UPDATE UPDATE: Okay, now, even in fastboot, it doesn't let me flash boot.img. I don't know what to do anymore
hocplyr98 said:
Not sure if I have CWM installed, but I can access fastboot and that's not really helping. I'll try again with the link you provided, but I'm able to flash everything BUT system.img. I'll try again and get back to you.
UPDATE: Yeah... It's doing the exact same thing. It's stuck at fastboot flash system system.img. It just says that it's sending it and it takes a long time before an error message pops up saying that there are too many links.
UPDATE UPDATE: Okay, now, even in fastboot, it doesn't let me flash boot.img. I don't know what to do anymore
Click to expand...
Click to collapse
This is where you need to talk to the experts. Go to #xoom at freenode.net and get some assistance.
okantomi said:
This is where you need to talk to the experts. Go to #xoom at freenode.net and get some assistance.
Click to expand...
Click to collapse
Not very much help from the "experts" there. I was completely ignored, and nobody responded to me...
hocplyr98 said:
Not very much help from the "experts" there. I was completely ignored, and nobody responded to me...
Click to expand...
Click to collapse
It's impossible to brick a Xoom. You can make or buy a factory cable and flash stock images from Motorola and follow up with OTA upgrades or flash whatever custom stuff you desire. The below links should save your Xoom. Don't forget to hit the thanks button
http://forum.xda-developers.com/showthread.php?t=1077414
http://developer.motorola.com/products/software/?pubid=987654
http://forum.xda-developers.com/showthread.php?t=1108518
Although if you're going to give up and aren't comfortable to continue working with it I would be very interested in purchasing it, you can PM me if interested.
Saintfyre said:
Although if you're going to give up and aren't comfortable to continue working with it I would be very interested in purchasing it, you can PM me if interested.
Click to expand...
Click to collapse
Keep an eye out on ebay, I just got a xoom on there with launcher force closing repeatedly for $264
Sent from my ADR6400L using XDA App
davidsos said:
It's impossible to brick a Xoom. You can make or buy a factory cable and flash stock images from Motorola and follow up with OTA upgrades or flash whatever custom stuff you desire. The below links should save your Xoom. Don't forget to hit the thanks button
http://forum.xda-developers.com/showthread.php?t=1077414
http://developer.motorola.com/products/software/?pubid=987654
http://forum.xda-developers.com/showthread.php?t=1108518
Click to expand...
Click to collapse
Not impossible but not as likely as you would think with the 100 "I think I bricked My xoom threads floating around.
To the OP...if you do not even know whether clockwork modified recovery is installed on your device then I am not sure you have the knowledge necessary to be messing with your device...I guess most people need to learn the hard way...
ACTUALLY I GOT THE ANSWER TO THESE QUESTIONS (ignore this thread)
I've been reading through this guide: http://forum.xda-developers.com/showthread.php?t=1249798
Question 1: When they say wipe everything, do they mean media too? (like music and such) Because when I had a samsung vibrant, they also said that but it never wiped media.
Question 2: Will I have to run a nandroid backup if this is my first time rooting, or will it be unnecessary?
Question 3: After finishing doing everything (unlocking and rooting)
do I just directly flash this http://forum.xda-developers.com/showthread.php?t=1484770 or is there something I need to do beforehand?
Also, in the guide, it says something about green android of ! if you have received an OTA. Which I have received many from Moto before. Will I have to download the original motorola files (HC or ICS, I'm currently on ICS)? If so, where do I put it? I'm confused
okantomi said:
"The green bot of !
there is one problem that exists with all xoom roots/cwm hacks. I had this problem as well as a bunch of other people when trying to flash CWM. If these files are present after an OTA update, then your xoom when entering recovery will show the green android robot with a exclaimation point instead of CWM.
If you have applied an official ota update.zip then you have a file like this on your xoom that will prevent CWM from working:
/system/recovery-from-boot.p /system/etc/install-recovery.sh
From the command window, type
adb remount adb shell rm /system/recovery-from-boot.p
adb shell rm /system/etc/install-recovery.sh
Or, if you do not already have root on your xoom when you get the green bot of ! then you have to do the following with the stock moto files for your device (from moto dev).
(This Wipes your Xoom )
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot -w
fastboot reboot
Do not relock! After your Xoom boots back up and goes into the setup screens skip setup and enable usb debugging.
Proceed to Step 4.1, above.
Click to expand...
Click to collapse
Thanks so much! I'm new to this, it's so much different from rooting my Samsung Vibrant phone
cmd hangs
"Or, if you do not already have root on your xoom when you get the green bot of ! then you have to do the following with the stock moto files for your device (from moto dev).
(This Wipes your Xoom )
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot -w
fastboot reboot
Do not relock! After your Xoom boots back up and goes into the setup screens skip setup and enable usb debugging.
Proceed to Step 4.1, above. "
I did the above steps. All my command prompt does is hang...waiting for the xoom to respond.
rosystreasures said:
"Or, if you do not already have root on your xoom when you get the green bot of ! then you have to do the following with the stock moto files for your device (from moto dev).
(This Wipes your Xoom )
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot -w
fastboot reboot
Do not relock! After your Xoom boots back up and goes into the setup screens skip setup and enable usb debugging.
Proceed to Step 4.1, above. "
I did the above steps. All my command prompt does is hang...waiting for the xoom to respond.
Click to expand...
Click to collapse
There may be something wrong with my instructions...they've gotten convoluted over time. Try one of the other guides in General..there are a couple of newer ones that might work better. Mine still gives a lot of information but I think I'll retire it 'cause I don't want to cause issues.
I recently rooted and flashed a rom on my xoom. I'm a simple point and click windows user and I didn't have much trouble, so it's not that hard to do.
[HOW TO][UPDATED GUIDE] Unlocking & Rooting your XOOM!
http://forum.xda-developers.com/showthread.php?t=1477024
is the thread I used. Follow the instructions exactly and read the entire thread before you start, it'll save you a few headaches. This'll get you in (I think) ICS with superuser and all that jazz. If you want a rom, like me, then you'll have to head over to the development forum and take your pick. I'm running EOS 2.0, still deciding what to do with my xoom atm.
I wish I'd known of this thread last night. I struggled for several hours to root. It finally did. I also got the rom installed.
rosystreasures said:
I wish I'd known of this thread last night. I struggled for several hours to root. It finally did. I also got the rom installed.
Click to expand...
Click to collapse
I'm glad you got it rooted. That newer guide skips some steps that were needed earlier but are no longer needed. Like I said, I will retire my guide as too confusing now.
Quickboot vs. ROM manager
okantomi said:
I'm glad you got it rooted. That newer guide skips some steps that were needed earlier but are no longer needed. Like I said, I will retire my guide as too confusing now.
Click to expand...
Click to collapse
I started out with the standard 3.2 on my Xoom Wifi
with a nagging system message to update (I am guessing 3.2.2)
So I followed thread 1249798 and now am unlocke & rooted!
I am also using Recovery: Eos Recovery R6
I still get the nagging system message to update.
I would like to load a custom ROM, probably Moray.
My questions are this:
1. Will the Nagging system update message cause a
problem loading a custom ROM?
2. I could use the process as described in thread 1249798
to load the ROM, but I have read that since I am rooted
I could use Quick Boot app. Is this true? What about the
ROM Manager app, could I use this to load Moray? What is
the difference?
3. Since my base is 3.2 I am guessing I cannot load any
EOS ICS Rom's, is this correct? I need to bring my base
to 4.0 right?
4. Both Hammerhead and Moray state that they are both:
"Pre rooted with su and Superuser". Does this mean I did
not have to root my Xoom, I could have just loaded either
of these Roms and become rooted?
5. I have read some comments about:
/system/etc/install-recovery.sh
If I remove this file, will this stop the nagging System Update message?
6. Do I need to back anything up prior to loading a ROM?
Thanks!
Still with that, you can flash TEAM EOS ROM ICS. just boot into recovery and flash the TEAM EOS ROM. Mine was 3.2.1 as well. GOOD LUCK
Hi all, I will start with saying I have searched the forums pretty extensively and did not find anything similar, so I am asking with a new thread. If it is here, I am sorry..my head hurts and this is really getting to me.
What I am trying to do is change a US 604 to either a Canadian 604 or a Brazilian 604, the person wants PT BR as default system.
OK, I unlocked and rooted the 604, that is all OK. My issue is when I try to flash either the Build H.6.2-21 for Canada or Build H.6.2-21 for Brazil (both directly from motodev), all EOS Recovery CWM R6 gives me is starting then aborts, no message why is given and no logs are present. I did manage to get the EOS wingray dated 6/19 to flash, added googleapps 10.5, rebooted then it just sat at the animated EOS logo for 10 minutes, I hard booted and restored from backup. Restored fine. Back to stock which is: Xoom 4.0.4 Kernel 2.6.39.4-g42a0480 Build # IMM76
Someone please help, I have been killing myself researching this for over a week and while having made progress, the job is not complete and I have hit a wall.
All the ROMS I have downloaded MD5 check OK.
This is my first serious adventure with Android, I have rooted other Android devices but have never messed with ROMs.
Help..please? :|
thank you for the time.
I suggest that you install the earlier recovery R4c v3.2.0.0 from the Development Section. The new EOS recovery that you are using has some issues. Ok, are you flashing zipfiles? I thought that the stock images from motodev were .img files. You use adb to flash those. Please excuse me if I have misunderstood.
The images you download from motodev may come in the form of a zip. However that is not a zip that can be flashed in recovery. On a computer, you should extract the contents of the zip you downloaded off of motodev. When you look at the extracted contents (it may be in its own folder), you should come across some .img images. In a terminal/command line, you should use the fastboot commands to flash those images on your xoom.
As the Motodev website says, you should execute the following commands in this order.
FROM MOTODEV WEBSITE said:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
Note: If no userdata.img file is present in your download, please issue the command:
fastboot erase userdata
Click to expand...
Click to collapse
If you want to keep the bootloader unlocked, you should probably leave out "fastboot oem lock" because that command will lock the xoom's bootloader.
Thank you guys for replying!
okantomi, I was unaware of the issues with the latest recovery, thank you. I will grab the version you suggested. They are img files inside a zip from motodev, perhaps I cannot do it the way I am trying to and need to follow yosterwp's advice?
I assume I extract the imgs into where adb is correct?
Again, thank you so much guys, I am learning this as I go and at times is confusing and I get a little lost.
Thank you!! I will keep you posted with results
Solved!!
SUCCESS!! Thank you so much you two, I cannot believe it was that simple and I did not see it. You saved me guys!! Awesome.
Muito orbigado!!!!
Xipetotec said:
SUCCESS!! Thank you so much you two, I cannot believe it was that simple and I did not see it. You saved me guys!! Awesome.
Muito orbigado!!!!
Click to expand...
Click to collapse
That's good to hear! You're welcome!
I tried to flash a custom rom (KatKiss), and it seems that I did something wrong along the way because the tablet is stuck in a bootloop.
So I rebooted my tablet and access the bootloader ("fastboot devices" recognize my device) and try to go to the recovery (with the TWRP splash screen, "adb devices" recognize my device). Unfortunately after 20 seconds on the splash screen, the tablet reboots (tries to load my katkiss android but bootloop everytime).
Bootloader : 10.6.1.14.10
TWRP : 3.1.1.0
Since the fastboot recognize my device while in bootloader, I think that I should try to flash twrp since it seems to be corrupted somehow.
Every time I flashed a rom nothing went wrong but now that I have a problem I don't want to worsen it and would like some help on the issue.
Did you flash the rom in your current TWRP?
Something is off... Did you possibly flash the TF201 rom version??
Whatever you do - do not use Wipe Data from the bootloader!!
Reflash TWRP, format data, then reflash the rom
And report in more detail what you did
Sent from my Nexus 5X using Tapatalk
Thank you for the fast reply!
I did flash the rom with my current TWRP and only downloaded the rom version for the TF700. Below is what I tried from your suggestion:
I check that my device is recognized:
fastboot device
So I tried flashing TWRP:
fastboot flash recovery twrp-3.1.1-0-tf700t
After it succeeded, I reboot the tablet:
fastboot reboot
And as a result... nothing changes, I don't know if I should try with older version of TWRP. Seems like I only have access to the tablet with the fastboot.
That is very strange indeed. Yes, try a 3.0.2 version of TWRP and see if that works.
If not, I would flash the Asus stock blob in fastboot and start from scratch....
Sent from my TF700T using Tapatalk
Kromlech said:
And as a result... nothing changes, I don't know if I should try with older version of TWRP. Seems like I only have access to the tablet with the fastboot.
Click to expand...
Click to collapse
Not sure if this will help but I had a reboot problem with trying to load into TWRP. I posted my solution into a different thread but will toss it out here..
I just had this problem with a Transformer 201Prime. The cycle went something like this..
Power on.... get ASUS logo in middle, Tegra3 logo on lower right, and bootloader unlocked in upper left....
then a buzz... then reboot.....
So I would try the power button and hold the volume down... that got me into the bootloader but when I hit the volume up button it would give me the TWRP logo... then buzz and reboot...
After much monkeying around... I realized I would have to re install everything. Fortunately I had the original NVFLASH bloob files backed up so I was able to get into the NVFLASH commands.
Here is a great tutorial, it is for the 201 so be sure to download the correct files but the steps are basically the same.
https://forum.xda-developers.com/tra...prime-t3486237
The other problems is I had to download a bloob tool to 'unpack' the necessary .bin and .ebt files that are mentioned in the commands... I used the following link to download the tool.
https://github.com/AndroidRoot/BlobTools
I hope this helps shake loose a few answers.
Once I was able to get a working recovery I could flash an updated ROM. (KatKiss is my current favorite)
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
double post
Kromlech said:
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
Click to expand...
Click to collapse
Unidave's link would only help you if you generated your device specific nvflash blobs when the tablet was still functioning. Did you:
flash a specifically modded recovery - flash the moddded bootloader, use wheelie to generate and save your blobs, return everything to factory specs?
I highly doubt it since you would have mentioned...
To flash the stock blob in fastboot you download the Asus firmware from here: https://www.asus.com/my/support/Download/28/1/0/11/29/8/
Extract the zip twice until you see a blob and a meta-inf file.
Move the blob into your fastboot folder, discard the rest of the file
Issue these commands one by one, letting each one finish before starting the next. Some will finish quick, others may take up to 3 minutes:
Code:
fastboot erase system
fastboot erase boot
fastboot erase recovery
fastboot erase misc
fastboot erase cache
fastboot erase userdata
fastboot flash system blob
fastboot reboot
The first boot will take a while, but that should put you back on a stock JB 4.2 system.
Trash all the files you used in your last attempt and redownload the rom, gapps and supersu
Fastboot flash TWRP
Reboot
Format /data in TWRP (this will take up to 1 hour - let it finish!!), then convert /data to f2fs
Flash the rom, gapps, supersu
If you flash Nougatella remember that you have to turn on wifi right after the language selection during setup or Google framework will crash.
Spend the end of the day doing it, but it worked flawlessly! Thanks a lot @berndblb, now I can use my tablet again!
Kromlech said:
I tried to flash version 3.0.2 of TWRP and the problem is still the same.
@Unidave199 the link you put in your post points to a post that doesn't seems to exist anymore, has it been moved?
@berndblb how do I do for flashing a rom with the fastboot? any stock rom to recommend?
Click to expand...
Click to collapse
My apologies for the problem with my link, looks like you resolved it, but wanted to post a correct working link to take someone else into the full conversation and context...
https://forum.xda-developers.com/showpost.php?p=71150385
berndblb said:
To flash the stock blob in fastboot you download the Asus firmware from here: https://www.asus.com/support/Download/28/1/0/11/fq2B3oq64av1O95/8/
Click to expand...
Click to collapse
Broken link ? that post isn't very old, either. ??
berndblb said:
Did you flash the rom in your current TWRP?
Something is off... Did you possibly flash the TF201 rom version??
Whatever you do - do not use Wipe Data from the bootloader!!
Reflash TWRP, format data, then reflash the rom
And report in more detail what you did
Click to expand...
Click to collapse
I did wipe data from bootloader, now I can't go to bootloader. How to revive my tf700t?
Please help
Thanks
ketulharini said:
I did wipe data from bootloader, now I can't go to bootloader. How to revive my tf700t?
Please help
Thanks
Click to expand...
Click to collapse
You'll need to refer to post #8. However, the link to the tf700 stock blob is broken. You'll have to search Google for one. They're out there, but it does require digging .Make sure the one you get is for the proper SKU of your tablet (US, Worldwide, JP, etc.). I completed the process myself maybe a month ago. Good luck!
monogwai said:
You'll need to refer to post #8. However, the link to the tf700 stock blob is broken. You'll have to search Google for one. They're out there, but it does require digging .Make sure the one you get is for the proper SKU of your tablet (US, Worldwide, JP, etc.). I completed the process myself maybe a month ago. Good luck!
Click to expand...
Click to collapse
I got the stock blob ww version.
Just tab doesn't stay on fastboot mode keeps rebooting.
Don't know how to do it.
Is it possible to get stable fastboot screen some how? Or just flash the bootloader to get fastboot working.
May be this noob question but I don't know how to do.
Thanks
ketulharini said:
I got the stock blob ww version.
Just tab doesn't stay on fastboot mode keeps rebooting.
Don't know how to do it.
Is it possible to get stable fastboot screen some how? Or just flash the bootloader to get fastboot working.
May be this noob question but I don't know how to do.
Thanks
Click to expand...
Click to collapse
There is one more piece to the puzzle- hold short while I dig it up.
Here it is: http://www.transformerforums.com/forum/transformer-pad-infinity-tf700-tegra-3-development/46302-guide-help-my-transformer-tf700-boots-only-recovery.html
Do be *very* careful. Read thrice, do it once. Especially if you're feeling noob-y.
monogwai said:
There is one more piece to the puzzle- hold short while I dig it up.
Here it is: http://www.transformerforums.com/fo...my-transformer-tf700-boots-only-recovery.html
Do be *very* careful. Read thrice, do it once. Especially if you're feeling noob-y.
Click to expand...
Click to collapse
Thanks for this information.
One more question,
My tab is keep bootlooping neither it stays on twrp nor bootloader.
It has blue screen of recovery that is twrp after 5 to 10 seconds it boots again.
Is this enough time to execute the commands while it is on blue screen?
Thanks
ketulharini said:
Thanks for this information.
One more question,
My tab is keep bootlooping neither it stays on twrp nor bootloader.
It has blue screen of recovery that is twrp after 5 to 10 seconds it boots again.
Is this enough time to execute the commands while it is on blue screen?
Thanks
Click to expand...
Click to collapse
Well, that depends on several things. What I did was write a short little DOS batch file to process all the fastboot commands. So, with your batch file ready, open your command prompt (change directory to your adb/fastboot directory if it's not set in system's 'path=' environment variable) and have the batch command typed in, ready to hit enter. Tether to pc via USB, proceed to boot to adb. The second you hear windows make the USB notification sound, slap that enter key. It should just process and reset the tab and get you out of TWRP bootloop. Which is just step one.
If you aren't familiar with writing bat files for DOS, let me know.
monogwai said:
Well, that depends on several things. What I did was write a short little DOS batch file to process all the fastboot commands. So, with your batch file ready, open your command prompt (change directory to your adb/fastboot directory if it's not set in system's 'path=' environment variable) and have the batch command typed in, ready to hit enter. Tether to pc via USB, proceed to boot to adb. The second you hear windows make the USB notification sound, slap that enter key. It should just process and reset the tab and get you out of TWRP bootloop. Which is just step one.
If you aren't familiar with writing bat files for DOS, let me know.
Click to expand...
Click to collapse
You mean a batch file with the adb commands right? Once he can boot into fastboot he has all the time in the world to run the commands for the buster99 (description in post #8). Depending on what situation he came from before, it might be a good idea to start all fresh...
The tricky thing are the adb push bootit.ko and the insmod command. Those have to be timed just right to get executed, so a batch file might come in handy. Both commands only take a second or two to execute, so your window of 5 seconds could work. Maybe not in the same session, but they should work.
If the insmod command does not kick the tablet into the bootloader, there are 2 possible reasoons:
adb push bootit.ko did not work
the insmod command did not work
To find out if the file push worked you could add a simple list command for the contents of /sdcard/. Again - tricky, I know since you still are working with the 5 sec window, but that's what you got to work with...
That would look something like in the attached picture. So after pushing bootit.ko you issue:
Code:
adb shell ls /sdcard/
Try it with the batch file, try it with single commands... Don't give up. As long as you have any kind of adb access you should be able to solve it.
Good luck!
berndblb said:
You mean a batch file with the adb commands right?
Click to expand...
Click to collapse
Yeah.
berndblb said:
Once he can boot into fastboot he has all the time in the world to run the commands for the buster99 (description in post #8).
Click to expand...
Click to collapse
Again, mistake in my terminology. What I meant to say is, batch commands for the process involving the Bootit.ko- the adb portion.
Thanks for clearing that up.
@ketulharini
Anyhow, I was unable to get the process to take without having automated *every last step* of the process. Literally open the cmd window, have the command for your batch file typed in ready to go, and plug in. Hear the noise from windows and slap enter asap. That's the only way I could get it in time, and I'm a ridiculously fast typist.
monogwai said:
Yeah.
Again, mistake in my terminology. What I meant to say is, batch commands for the process involving the Bootit.ko- the adb portion.
Thanks for clearing that up.
@ketulharini
Anyhow, I was unable to get the process to take without having automated *every last step* of the process. Literally open the cmd window, have the command for your batch file typed in ready to go, and plug in. Hear the noise from windows and slap enter asap. That's the only way I could get it in time, and I'm a ridiculously fast typist.
Click to expand...
Click to collapse
Care to share the batch file?
Long story short I messed up and now I don't have recovery. Only fastboot. Was bricked too before the no recovery thing.
How do I try to sort this? I don't have a pc either.
Using my old OnePlus 8T I was able to unlock, root and install a custom kernel.
Any ideas?
shadowofdeth said:
Long story short I messed up and now I don't have recovery. Only fastboot. Was bricked too before the no recovery thing.
How do I try to sort this? I don't have a pc either.
the good news is your phone can very likely be fixed. however in my experience you will need a computer. Folks here would love to help but knowing what device you are having an issue with would probably help with response to your situation. from fastboot you can boot a recovery image for your device and go from there. from fastboot you can also likely flash stock firmware to your device and start over fresh. It's also common to have to perform a factory reset after flashing the device to get it to properly boot.
Click to expand...
Click to collapse
OnePlus 9.
I tried searching but there are so many dead ends for finding the stock recovery. Even with that I'd still be bricked.
Where would one find the stock recovery, kernel and fastboot ready update.zip?
You do realize the boot.img is both recovery and kernel. Just extract it from payload.bin
MrSteelX said:
You do realize the boot.img is both recovery and kernel. Just extract it from payload.bin
Click to expand...
Click to collapse
If only I thought of that. It's not like I've been trying all day without success extracting what I need from the payload.bin. Definitely no dead ends there. Thanks for the massive help.
shadowofdeth said:
If only I thought of that. It's not like I've been trying all day without success extracting what I need from the payload.bin. Definitely no dead ends there. Thanks for the massive help.
Click to expand...
Click to collapse
borrow a laptop from someone , use the msm tool
taintsx said:
borrow a laptop from someone , use the msm tool
Click to expand...
Click to collapse
Im so close I can smell it now. Managed to get Python installed (had to deep dive into the comments on articles and tutorials) and have everything extracted in the last hour.
Now, for flashing these images I have to use Termux and it's working for the most part. My issue is now that I can flash one batch of images but not the other as per the xda guide linked now:
Restore OnePlus 9 to Stock via Fastboot Commands
This guide assumes you have the SDK Platform Tools installed and working, along with USB drivers for your device (if needed), and have your full update zip which you've already extracted the payload.bin from, and then dumped the images using...
forum.xda-developers.com
I keep getting errors about the partition being locked or something.
So close man. So close.
Locked partitions can only be flashed in fastbootd (fastboot reboot fastboot to get there).
First of all... Hold the both volume and power button for around 2 minutes. It'll take you to the bootloader mode. Then from the bootloader mode turn off your device then boot into edl then flash with msm.
Lesson learned