Related
I just upgraded my router to a wireless one. Firstly, it's connected via ethernet to a PC and it is happily getting internet access.
On my i5500 I get a strong wifi signal. Wifi Analyser shows the signal at max constantly. I can also connect with Gmote and it works just fine.
The problem is that I can't actually access the net at all from the phone.
So basically I know that my phone is talking to the router with no problem. It's just getting out onto the internet.
Does anyone know of a solution?
try logging into your router and change the broadcast channel to something else and test it again. it should be something like a/b/g mode... define a single channel and see if it works.
I had originally thought that was working. It did for the first few minute where I had connection but then it just dropped.
I have noticed that I have some very small bursts where I can connect.
Do you think that trying the different channels may be the solution?
I have the same problem. Have you found a solution?
Still no solution. I went through every channel and every encryption method.
So far I've found that having the channel set on 'Auto' and then disabling encryption seems to give me internet connection through WIFI for at least the initial period but it eventually drops. But that's also not always.
I've also Googled it to death and found nothing. If you do find the solution please post it here and I'll do the same.
Maybe we can help each other.
make sure you entered the right password of wlan.
use a pc to connect the router and in the wlan you'll find the password.
Ok, just to clarify. My phone connects to the Router via WLAN. In fact I can use Gmote to control my PC. So the WLAN connection is great.
The problem is accessing the internet when using that connection.
I had similar problems with a router last year. I resolved the issues by flashing DD-WRT firmware. The manufacturer's firmware was junk.
Sent from my ADR6300 using XDA App
I had that idea but they don't have firmware for my router yet. I have asked them if they intend to make one.
Any chance the firewall on your phone is blocking your browser from using the Wifi?
Sent from my DInc via XDA App
I have no firewall on my phone.
Ok I've tried some new stuff and they I've had the longest connectivity so far (which is about half an hour).
First I made sure my Wifi wasn't set to turn off when the screen goes to sleep. Second, according to a forum I read, Netgear recommends channel 7. If that channels doesn't work try 1,3,6,9,11,13.
I then disabled encryption.
Fortunately no one near me uses Wifi at all and I've got the kind of walls that stop the signal from getting outside.
Anyway. It's working so far but I'll monitor and report.
[edit] And I forgot. The router was checking for firmware but it wasn't actually finding so I downloaded it myself. Seems that also made a difference.
Ok. I can confirm after 2 and a half hours my internet connection is stable. I even left half way through and when I came back it connected perfectly.
So as a summary here's what I did:
1) Get latest firmware
2) Change channel to 7
3) Disable encryption
I will change encryption and see if it still works
First of all may I say I have searched for this problem on google, as well as xda forum. I did find several threads about this problem, but none of the solutions presented appear to be my case.
So, basically the problem is: I cannot connect to my home router, a Linksys WRT300N N-router. I could not connect with a N1, HTC Desire, nor with my actual NS. My previous Galaxy S was connecting fine though. I'm talking here about stock ROM, no rooting, no custom kernel etc. Also, using static IP address works like a charm, but then WiFi cannot be used on other outside routers, since Static Ip setting is not setup PER router, but rather per WiFi connection, meaning the phone will try to use the static IP defined for any WiFi I run into.
From My experience, it seems it could be related to wireless N router as opposed to b/g. This happened since I replaced my router with the actual one. Ever since this happened, my phone would not connect to my router. Also, this problem seems to be presentfor any N-router, since I cannot connect to WiFi in other locations as well (which might have N-routers as well).
Assuming that it is a problem with N-routers, I don't understand why the Galaxy S would connect, but NS not, since they are almost the same hw.
Does anyone have a clue on this? But please skip solutions like reset router, reset phone, reset modem, use different ROM etc. I am talking stock ROM for all the examples above.
Thanks.
I use my NS with three 802.11N routers without issue (D-Link, Belkin and Netgear).
Have you checked if MAC filtering on the router is active? What security mode are you using? Who makes yr router and does it have latest fw?
Sent from my Nexus S using XDA App
Just seen you use Linksys, I have a wag160n and I find it unsusable on terms of wifi, dreadful hardware, despite the parent company being Cisco
Check Linksys forums for problems.
Try another router for whether it's that or phone at fault.
Sent from my Nexus S using XDA App
MikhailCompo said:
I use my NS with three 802.11N routers without issue (D-Link, Belkin and Netgear).
Have you checked if MAC filtering on the router is active? What security mode are you using? Who makes yr router and does it have latest fw?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
MAC filtering is disabled, I've checked it. Security is, on the router, PSK-Personal with TKIP encryption. Key renewal: 7200 sec. Not sure if this can influence anything.
I've checked on linksys page for fw upgrade, they only have pdf manuals.
ionutz6 said:
First of all may I say I have searched for this problem on google, as well as xda forum. I did find several threads about this problem, but none of the solutions presented appear to be my case.
So, basically the problem is: I cannot connect to my home router, a Linksys WRT300N N-router. I could not connect with a N1, HTC Desire, nor with my actual NS. My previous Galaxy S was connecting fine though. I'm talking here about stock ROM, no rooting, no custom kernel etc. Also, using static IP address works like a charm, but then WiFi cannot be used on other outside routers, since Static Ip setting is not setup PER router, but rather per WiFi connection, meaning the phone will try to use the static IP defined for any WiFi I run into.
From My experience, it seems it could be related to wireless N router as opposed to b/g. This happened since I replaced my router with the actual one. Ever since this happened, my phone would not connect to my router. Also, this problem seems to be presentfor any N-router, since I cannot connect to WiFi in other locations as well (which might have N-routers as well).
Assuming that it is a problem with N-routers, I don't understand why the Galaxy S would connect, but NS not, since they are almost the same hw.
Does anyone have a clue on this? But please skip solutions like reset router, reset phone, reset modem, use different ROM etc. I am talking stock ROM for all the examples above.
Thanks.
Click to expand...
Click to collapse
Have you checked that you set up the router with b/g/n protocols? not only N..
Try to change the password encrypting method, to WPA or WPA2 or WEP, try also to change the default password.
Have you tried to disable the firewall (DMZ)?
I have exactly the same issue on my stock Desire.....
I have recently upgraded my router from a Belkin G+ to a Belkin N+ and using the b/g/n setting the desire WILL see the connection but will NOT connect to it, NO MATTER WHAT settings you try. Changing it to b/g and it will connect without any issues.
It is my understanding that the Desire/Nexus et al doesnt have the access to the N ability enabled (it has the correct chipset but for some reason it is not active).
Maybe when broadcasting the tri-band the chipset only sees the stronger N connection, therefore tries to connect but gets conflicted (due to lack of N firmware) and instead of switching to b/g it just loops to the stronger signal. IF that makes any sense
Riki1kenobi said:
I have exactly the same issue on my stock Desire.....
I have recently upgraded my router from a Belkin G+ to a Belkin N+ and using the b/g/n setting the desire WILL see the connection but will NOT connect to it, NO MATTER WHAT settings you try. Changing it to b/g and it will connect without any issues.
It is my understanding that the Desire/Nexus et al doesnt have the access to the N ability enabled (it has the correct chipset but for some reason it is not active).
Maybe when broadcasting the tri-band the chipset only sees the stronger N connection, therefore tries to connect but gets conflicted (due to lack of N firmware) and instead of switching to b/g it just loops to the stronger signal. IF that makes any sense
Click to expand...
Click to collapse
Well, the funny part is that I don't even know how to disable the N range to my Linksys 300N.
Anyway, it is weird that the Samsung Galaxy S had no issues with this, while Nexus S (still Samsung made, brother-in-law to SGS) has this issue. For HTC, all have had this problem, including Desire, Desire HD, Wildfire.
Still no explanation or resolution to this matter.
I may have fixed this issue (well I have for me anyway, so yay).
After posting this I decided to apply some weird logic to it. So I reset the router back to b/g, to do this you need to log into the router IP settings, for Belkin it is 192.168.2.1. On linksys routers I think it is 192.168.1.1 but check to be sure.
Once you are logged in there you can change the broadcast settings from N, b/g/n or b/g etc.
Okay, so here is what I did. I reset the router to broadcast b/g only, my Desire would connect. So I decided to try resetting the router to broadcast b/g/n (because I use N on other devices) and then switched the wifi on the desire off and back on again. Low and behold it connects.......Tried it loads of times now and connects everytime!
Might be worth a try?
You guys should just check the logs on the router and see what they say. Should give you a much better idea of what the issue is. You can then Google the error line.
Mine is fixed now, been connecting to various N routers with NO probs since I did the workaround.
My guess would be a protocol conflict (wireless handshake if you prefer) when N routers are broadcasting (based on the fact that the Desire/Nexus etc dont have N protocol enabled in the chipset firmware).
To get around the conflict connect to an N router using the b/g only setting in the routers IP settings and then check you can connect okay and switch the b/g/n back on in the router. I've done this twice today (different N routers, a Linksys and a D-Link) and it works on both where it wouldnt before, so it wasnt just my router.
hum... i am having the exact same problem as described only my router is already using
802.11g&802.11b
i have no idea why it keeps trying to obtain ip address
then it scans agains because it can't connect and tries to obtain the ip again
after trying for a minute or 2, the home ssid becomes:
"disabled, secured with..."
(device = motorola atrix)
I have tried everything and still not working... do routers block Mac addresses if it doesn't connect right away?
Sent from my MB860 using XDA App
Did you reboot your router? Mine does that sometimes but a reboot always fixes it.
Sent from my Nexus S using XDA App
Hum. Tried restarting the router... no go
Sent from my MB860 using XDA App
While everywhere I go I can get a wifi internet connection, when I try at home I connect to wifi but I cannot get any data connection! My router is fine because all my friends use it to connect on the net with their phones.
Any ideas anybody?
A possibility
There are some cases where the router is not compatible wit Android devices and allows them to connect properly onto the wifi network, but not getting the proper IP, subnet and so on. Have you tried to manually enter these details into the phone and try out if there will be any Internet access afterwards or not.
In some other cases, maybe the DHCP pool is empty so it can not provide you with an IP, where manually entering the IP details should again help. But I think this is very rare case. About the first case though, I met some issues with the routers and the Android devices.
Hope this will solve the prob..
Have a lovely day!
Did you try rebooting your router? This happend to me sometimes too, my laptop can connect just fine but not my phone & a router reset always fixes it.
I have tried to manually enter the IP address, subnet and so on into the phone but still I cannot get an internet connection! I have also rebooted my linksys rooter but still nothing!
Log into your router and change the output channel. Sometimes if the router is putting out on a high channel say 13 for example this can cause some devices to not be able to communicate with it. So try changing it to a low number say 3. This should solve the problem.
kabuk1 said:
Did you try rebooting your router? This happend to me sometimes too, my laptop can connect just fine but not my phone & a router reset always fixes it.
Click to expand...
Click to collapse
This is more than likely because your router is set up to automatically switch to the channel that is the least congested, again if this is a high channel this can cause problems for some devices. What you are doing when you turn it off and on again is resetting the channel. I recommend you also manually select the channel by logging into you router and changing the settings.
I changed manually the router number several times but still no connection!
This issue is due to WIFI encryption. Try WEP or WPA encryption. I was facing the same issue. When i changed the encryption to WPA I am able to access the net.
uttamhoode said:
This issue is due to WIFI encryption. Try WEP or WPA encryption. I was facing the same issue. When i changed the encryption to WPA I am able to access the net.
Click to expand...
Click to collapse
Yes, it might be encryption, might be the channel selection as well as previously stated.
The thing with the channels is not only if they are on higher or lower, but they are just a little hops on the frequency side so for example if some other device is working on the same or close to yours channel, it might interfere and give you disconnections from the wifi, slower speed, no connection at all etc. etc.. So in some case the channel selection (changing the wifi channel) may do the trick. Unfortunately in your case as I can understand this is not true.
About the encryption, there is also one more thing as a security and that is not allowing the devices automatically, but with it's MAC addresses.
I would recommend just for testing purposes to try and disable all the security and check out the connection that way.
What sort of IP details did you entered on the phone? I mean - I was thinking of entering an IP different from the pool, subnet usually 255.255.255.0 (depends) and the Default Gateway to be the router's IP. Then for the DNS if you can try with the OpenDNS and one from Google.
And if you would like to share some info if there are any other devices connecting with the wifi at the premises and how they are working.
Hopefully you will resolve the issue, soon!
Have a lovely day!
bump
having same issues ever since I flashed latest insertcoin ROM
I tried the 2.3.5 ROM and was having issues connecting to wifi, so I went to the 2.3.4 SSE, but wifi issues did not clear up. It hangs on obtaining IP.
This happens for all settings, static and dynamic, router reset did not help, modifying channels did nothing, neither did changing encryption settings. The wifi connection works for every other device in our home, including a stock Sensation.
Thanks in advance for any help. Since I'm a noob on forums I can't post to the dev section about this.
syuusuke said:
bump
having same issues ever since I flashed latest insertcoin ROM
I tried the 2.3.5 ROM and was having issues connecting to wifi, so I went to the 2.3.4 SSE, but wifi issues did not clear up. It hangs on obtaining IP.
This happens for all settings, static and dynamic, router reset did not help, modifying channels did nothing, neither did changing encryption settings. The wifi connection works for every other device in our home, including a stock Sensation.
Thanks in advance for any help. Since I'm a noob on forums I can't post to the dev section about this.
Click to expand...
Click to collapse
Hi, since the stock sensation is working properly, why don't you flash the relevant stock rom and see if that works, seems like all else failed
Okay, a little about my setup. I have tested on Slim ICS 2.7, 2.9; Codename Android 1.4, 1.5.5; as well as AOKP (I dont know exact builds, but am on the latest now - build 28). I have a Cradlepoint MBR 1000 which is a b/g/n 4g router (though I only have cable hooked up - was bought originally to allow me to broadcast my Clear 4g service, but Clear doesnt work where I live now).
EVO 3D, iPhone 4s, All my laptops, HeroC, Kyocera Echo, Roku...I mean everything connects to my Wi-Fi EXCEPT my NS4G...WTH?
Does anyone else have this issue?...could it be some settings with the N router?...I cant believe everything but this phone works.
Please help. It is so frustrating to be limited to 3g that works intermittently while I am at home. I have all my apps from the Google Play backed up to my sdcard so I dont have to connect to install them...it is a huge pain. Thanks in advance
Need some more description. What settings do you have on the router, how have you tried to connect, does it connect then drop out, can you see the network at all, etc?
Either your phones wifi hardware is gone or your house.
So here's what you can do to narrow down on the problem.
Tell me if you can connect to any other wifi hotspots outside your house. If it does connect then problem is router if it doesn't than problem is with the phone.
Good luck.
Sent from my Nexus S using Tapatalk
Does it detect any Wi-Fi networks at all?
Does it detect any Wi-Fi networks at all? or just can't make the connection
I have the same problem but only at home .I don't anderstand a lot about this, I change my rom with ice scream sandswich 4.0.4 it was working with 4.0.3. Where is the problem. Thanks for your help.
Sent from my GT-I9000 using xda premium
shockem said:
Either your phones wifi hardware is gone or your house.
So here's what you can do to narrow down on the problem.
Tell me if you can connect to any other wifi hotspots outside your house. If it does connect then problem is router if it doesn't than problem is with the phone.
Good luck.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Not necessarily. Setup of each router can change in numerous ways so as to stop certain devices from working, as can certain phone settings not allow connecting to certain routers. It is not quite so black and white, and we already know the router works.
daviki said:
I have the same problem but only at home .I don't anderstand a lot about this, I change my rom with ice scream sandswich 4.0.4 it was working with 4.0.3. Where is the problem. Thanks for your help.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Sounds like a channel setting problem. Easiest way is to open up your router config and change the channel between 1 and 12 and this shouldn't happen again. Alternatively you could mess around with your build.prop.
Harbb is right, you might want to test several things within your router:
Change channels (use 1, 6 or 11-12)
Set it to only use on b/g connections (don't use n)
Different authentication methods (WPA2 with AES, etc)
And make sure you don't have a limit on your DHCP settings (just to make sure you don't have a ton of devices connected so it's not handing more IPs) or MAC filter.
Okay, sorry for not replying sooner. I posted this, then went to bed.
@Harbb:
It does see the network, lets me connect, put in the password, and says it is connected. It always says the connection is poor when I know it should be a good connection. The phone then shows the wifi icon and up and down arrows inside of the icon...I never see a portion of blue. When I try to download from the market, it will act like it is working, then the icon will disappear/reappear numerous times before it tell me there is not a connection.
As for my router setup. I do not know what information will help in this but here is some info: I do not have MAC filtering on, WISH is active (dont use it), WPA2 Only Personal AES (this is what I use), Channel 6 (I have tried channel 11 because I read somewhere the Wii needed 1 or 11 or one of my devices needed it), Transmission rate is Best, Channel is Auto 20/40 MHz, Mixed b/g/n (to utilize N and G, it has to be on this setting, there isn't an option for Mixed n/g), it is set on 192.168.0.x, NetBIOS mode type is Mixed (Broadcast then Point to Point).
@shockem I have not tested it with any other hotspot to see if it is just a problem with that router and this phone. I will try if I can find an open hotspot and let you know.
@Billchen0014 It does detect the network and connects, but drops it constantly...I cant even download a <1MB file from the market.
@Harbb (2) Going by your advice to daviki...it looks like I need to check another router. I go by a Starbucks, so I will try their hotspot...unless it isn't free, then Ill look around.
Thanks everyone who is helping me with this.
@Oogway, I will try G only and see what happens...if I use Mixed it has to be g/b or b/g/n. As for DHCP there is only 2 maybe 3 devices connected and No MAC filtering
Could it be the Wifi country code issue?
Is that something on the phone? Also, I tested different channels (1, 6, 11) as well as b/g and g only. Still no go.
Sent from my Nexus S 4G using XDA
Thanks for the info. Test another hotspot (preferably one with a wpa2 password too if possible) and let us know. I'll reply later with some things to try as I gotta get going.
Okay, I did test one more thing. I sat right next to the router and it had full bars. Stayed full and my speed tests were great. Moved to where I sit on the couch about 30 walking steps away and no connection. I know the signal reaches because it is where I use laptops and other devices. The PS3 and Wii are further away and have no issue. It is not a clear path, but there aren't any doors between the router and the couch.
Just some more info...leading me to believe it is an issue with the phone. I get horrible service with Sprint also, so it may be connected. I don't know.
Any ideas? Is it just because of how far away I am?
Again, thanks everyone for the help. It has been so frustrating ever since I got the phone.
Sent from my Nexus S 4G using XDA
Wifi Analyzer can give you a dB reading on the signal strength if you'd like to try that from a distance too. Wifi at uni likes to show low bars quite often, however alot of the time i have great signal and it shows through wifi analyzer. May not be related since uni is a peap connection, but worth a shot anywho. Might give another hint on whether you should seek out warranty or router settings.
Hey All,
I am currently running AOKP Jelly Bean, and I am having an issue with my WiFi network. When I turn WiFi on on the phone, I see all of my neighbors' SSIDs that my computer sees, however, my SSID doesn't appear at all. I didn't have this issue on stock; the phone would connect when I parked my car outside my place.
I have tried:
1. Manually entering my SSID and connection info. After this it just says the network is out of range.
2. Activating the WPS connection option on the phone and pressing the WPS button on the router.
3. Doing the manual WPS method with the PIN from the phone in the router setup.
4. Changing the WiFi broadcast channels, strength, GHz, and b/g/n.
5. Enabling only the approved MAC addresses to connect to the router.
6. Restarting the router.
Nothing has worked so far. I downloaded WiFi Analyzer on my phone, and my network doesn't show up. If I didn't have two other computers connected, I would think something is wrong with the router. Any suggestions? I would have posted this in the AOKP thread, however I don't yet have permission. Thanks!
I doubt it is your phone because you see your neighbors wi-fi. So I'd power cycle the router (I see you did that once already). And also ensure it's not operating on high band wireless N (5.8 Ghz I think) but sounds like that's not the case because it worked on stock. Are you broadcasting your SSID?
Veritas327 said:
Hey All,
I am currently running AOKP Jelly Bean, and I am having an issue with my WiFi network. When I turn WiFi on on the phone, I see all of my neighbors' SSIDs that my computer sees, however, my SSID doesn't appear at all. I didn't have this issue on stock; the phone would connect when I parked my car outside my place.
I have tried:
1. Manually entering my SSID and connection info. After this it just says the network is out of range.
2. Activating the WPS connection option on the phone and pressing the WPS button on the router.
3. Doing the manual WPS method with the PIN from the phone in the router setup.
4. Changing the WiFi broadcast channels, strength, GHz, and b/g/n.
5. Enabling only the approved MAC addresses to connect to the router.
6. Restarting the router.
Nothing has worked so far. I downloaded WiFi Analyzer on my phone, and my network doesn't show up. If I didn't have two other computers connected, I would think something is wrong with the router. Any suggestions? I would have posted this in the AOKP thread, however I don't yet have permission. Thanks!
Click to expand...
Click to collapse
lampel said:
I doubt it is your phone because you see your neighbors wi-fi. So I'd power cycle the router (I see you did that once already). And also ensure it's not operating on high band wireless N (5.8 Ghz I think) but sounds like that's not the case because it worked on stock. Are you broadcasting your SSID?
Click to expand...
Click to collapse
I retried power cycling the router (and modem) this morning with no improvement. Right now it is set to broadcast b/g/n with the channel set to auto and at 2.4 GHz. Also, I am broadcasting my SSID according to the router settings and being able to see it on my MBA and iPad. No luck yet!
Now that I have access to the Development threads, I have gone ahead and posted this in the AOKP Jelly Bean thread. If a moderater sees fit to delete this, I understand. Thanks to all those who took a look!
Are you in the US (or using a US phone)? Reason I ask is that I believe phones here are restricted from certain channels of wi-fi not approved by the FCC. So if you're router is not a US model and were auto-selecting you wouldn't necessarily see it. Might try assigning channel 1 just to eliminate that as a possibility... Although if you are in the US and your router was purchased/leased here then it's not that.
Veritas327 said:
I retried power cycling the router (and modem) this morning with no improvement. Right now it is set to broadcast b/g/n with the channel set to auto and at 2.4 GHz. Also, I am broadcasting my SSID according to the router settings and being able to see it on my MBA and iPad. No luck yet!
Now that I have access to the Development threads, I have gone ahead and posted this in the AOKP Jelly Bean thread. If a moderater sees fit to delete this, I understand. Thanks to all those who took a look!
Click to expand...
Click to collapse
lampel said:
Are you in the US (or using a US phone)? Reason I ask is that I believe phones here are restricted from certain channels of wi-fi not approved by the FCC. So if you're router is not a US model and were auto-selecting you wouldn't necessarily see it. Might try assigning channel 1 just to eliminate that as a possibility... Although if you are in the US and your router was purchased/leased here then it's not that.
Click to expand...
Click to collapse
Yep. US phone (T-Mobile) with a D-Link router I bought from Amazon. And it did work when I was on stock with no issues.
When you figure it out please post back what the issue was.
Sent from my HTC VLE_U using xda app-developers app
It seems I posted at an inopportune time in the other thread. The discussion has moved on to the 5th build of the rom and my post looks to be forgotten. If anyone has any suggestions here, I would appreciate it!
Veritas327 said:
It seems I posted at an inopportune time in the other thread. The discussion has moved on to the 5th build of the rom and my post looks to be forgotten. If anyone has any suggestions here, I would appreciate it!
Click to expand...
Click to collapse
I answered your post in the aokp thread. I'm having an issue where my phone connects to my router but no data is transferred. I just broke out my old belkin g router and problems solved. Yes running 2 routers isn't ideal but it works.
Sent from my HTC One S using xda premium
Just in case it helps anyone: if you run two routers on a common band, whether with the same SSID or not, make sure they are not on the same channel or near channels; i.e. channels 1,6, and 11 work well together. (Although six is frequently a default and I assume most people never change it so your neighbors may already have it saturated.)
I believe Veritas327 said in their original post that they already tried G-band - so, mikeyinid, do you think it has more to do with the older hardware rather than the frequency? I'm really just curious at this point...
mikeyinid said:
I answered your post in the aokp thread. I'm having an issue where my phone connects to my router but no data is transferred. I just broke out my old belkin g router and problems solved. Yes running 2 routers isn't ideal but it works.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse