This post is just to inform that the procedure in [GUIDE] Downgrade G2 (2.3.3) & DZ (2.3.3) & mT4g (2.3.4) w/ S-ON to Stock Froyo works too for Inspire 4G with S-ON and Android 2.3.
Here's my log:
Code:
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb shell cat /dev/msm_rotator[/B]
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
/dev/msm_rotator: invalid length
[B]
C:\Program Files\Android\android-sdk-windows\platform-tools>adb push fre3vo /data/local/tmp[/B]
212 KB/s (9796 bytes in 0.045s)
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb shell[/B]
[B]$ chmod 777 /data/local/tmp/fre3vo[/B]
chmod 777 /data/local/tmp/fre3vo
[B]$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF[/B]
/data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
fre3vo by #teamwin
Please wait...
Attempting to modify ro.secure property...
fb_fix_screeninfo:
id: msmfb
smem_start: 802160640
smem_len: 3145728
type: 0
type_aux: 0
visual: 2
xpanstep: 0
ypanstep: 1
line_length: 1920
mmio_start: 0
accel: 0
fb_var_screeninfo:
xres: 480
yres: 800
xres_virtual: 480
yres_virtual: 1600
xoffset: 0
yoffset: 0
bits_per_pixel: 32
activate: 16
height: 106
width: 62
rotate: 0
grayscale: 0
nonstd: 0
accel_flags: 0
pixclock: 0
left_margin: 0
right_margin: 0
upper_margin: 0
lower_margin: 0
hsync_len: 0
vsync_len: 0
sync: 0
vmode: 0
Buffer offset: 00000000
Buffer size: 8192
Scanning region faa90000...
Scanning region fab80000...
Scanning region fac70000...
Scanning region fad60000...
Scanning region fae50000...
Scanning region faf40000...
Scanning region fb030000...
Scanning region fb120000...
Scanning region fb210000...
Scanning region fb300000...
Potential exploit area found at address fb30d200:e00.
Exploiting device...
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb shell[/B]
# [B]exit[/B]
exit
----
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb push misc_version /data/local/tmp/misc_version[/B]
303 KB/s (15837 bytes in 0.051s)
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb shell chmod 777 /data/local/tmp/misc_version[/B]
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb shell[/B]
# [B]/data/local/tmp/misc_version -s 1.00.000.0[/B]
/data/local/tmp/misc_version -s 1.00.000.0
--set_version set. VERSION will be changed to: 1.00.000.0
Patching and backing up partition 17...
# [B]sync[/B]
sync
# [B]dd if=/dev/block/mmcblk0p17 bs=1 skip=160 count=10[/B]
dd if=/dev/block/mmcblk0p17 bs=1 skip=160 count=10
1.00.000.010+0 records in
10+0 records out
10 bytes transferred in 0.002 secs (5000 bytes/sec)
# [B]exit[/B]
exit
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>adb push PD98IMG.zip /sdcard/PD98IMG.zip[/B]
[B]1638 KB/s (274812440 bytes in 163.823s)
C:\Program Files\Android\android-sdk-windows\platform-tools>adb reboot bootloader[/B]
[B]C:\Program Files\Android\android-sdk-windows\platform-tools>[/B]
hello i flash my drivice mtk6592 ( star n3+ ocracore ) with a same rom.
is not first time to i flash rom, but dhis new phone worked just a 30 min
after flash my touch screen dont work . and imei ( imei fix ok)
i try so send a lots rom , rom accept never found error . same my touch screen dont work.
and factory rom no success.
maybe i need to edit scatter file?
maybe my touch screen is bricked?
maybe my touch screen have hardware problem?
dhis is my test
Code:
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003a3e00000(14910MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
OK!!
Code:
?????????adb?fastboot?????,??:
??adb??:adb devices
??shell:adb shell
??????:adb logcat
???????SD?:adb push D:\myfile.pdf /sdcard/
???SD?????:adb pull /sdcard/myfile.pdf D:\
??fastboot??:fastboot devices
??adb????:adb help
??fastboot????:fastboot help
C:\Program Files (x86)\Shuame>adb shell
[email protected]_v92_zlh_hd:/ $ cat /proc/devices
cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
5 /dev/tty
5 /dev/console
5 /dev/ptmx
10 misc
13 input
14 sound
29 fb
90 mtd
108 ppp
116 alsa
128 ptm
136 pts
141 mtk_stp_usktrk
153 mtk_wmt_WIFI_chrdev
160 Vcodec
166 ttyACM
168 MJC
180 usb
182 sec
184 ccci0
184 CCCI_IPC_DEV0
184 ccci1_fs
184 vir_chr0
184 ccci_tty_drv0
188 M4U_device
189 usb_device
190 mtk_stp_wmt
191 mtk_stp_GPS_chrdev
192 mtk_stp_BT_chrdev
193 fm
196 devmap
204 ttyMT
226 ttyGS
227 camera-pipemgr
228 mt3326-gps
229 camera-sysram
230 camera-isp
231 FM50AF
232 kd_camera_hw
233 DumChar
234 accdet
235 mtk-adc-cali
236 mtk_disp
237 MTK_SMI
238 dummy_eeprom
239 dummy_cam_cal
240 hall_dev
241 AGOLD_DRIVER
242 mtk_jpeg
243 pmt
244 kd_camera_flashlight
245 flash_info
246 btn
247 mtk_almk
248 btif
249 MT_pmic_adc_cali
250 mtkfb_vsync
251 mmp
252 sched
253 BOOT
254 rtc
Block devices:
259 blkext
7 loop
8 sd
31 mtdblock
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
179 mmc
253 zram
254 device-mapper
[email protected]_v92_zlh_hd:/ $
C:\Program Files (x86)\Shuame>adb shell
[email protected]_v92_zlh_hd:/ $ cat /proc/partitions
cat /proc/partitions
major minor #blocks name
7 0 1254 loop0
253 0 1048576 zram0
179 0 15246336 mmcblk0
179 1 1 mmcblk0p1
179 2 10240 mmcblk0p2
179 3 10240 mmcblk0p3
179 4 6144 mmcblk0p4
179 5 819200 mmcblk0p5
179 6 131072 mmcblk0p6
179 7 1212416 mmcblk0p7
179 8 13001728 mmcblk0p8
179 64 2048 mmcblk0boot1
179 32 2048 mmcblk0boot0
179 96 7764992 mmcblk1
179 97 7760896 mmcblk1p1
[email protected]_v92_zlh_hd:/ $ mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/[email protected] /system ext4 ro,noatime,noauto_da_alloc,commit=1,data=ordered 0 0
/[email protected] /data ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=or
dered 0 0
/[email protected] /cache ext4 rw,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ord
ered 0 0
/[email protected]_f /protect_f ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_all
oc,commit=1,data=ordered 0 0
/[email protected]_s /protect_s ext4 rw,nosuid,nodev,noatime,nodelalloc,noauto_da_all
oc,commit=1,data=ordered 0 0
/dev/block/loop0 /mnt/cd-rom iso9660 ro,relatime 0 0
/dev/block/vold/179:8 /storage/sdcard1 vfat rw,dirsync,nosuid,nodev,noexec,relat
ime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioch
arset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:97 /storage/sdcard0 vfat rw,dirsync,nosuid,nodev,noexec,rela
time,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioc
harset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:97 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,rela
time,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,ioc
harset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /storage/sdcard0/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
[email protected]_v92_zlh_hd:/ $
BliNeR-KeY said:
hello i flash my drivice mtk6592 ( star n3+ ocracore ) with a same rom.
is not first time to i flash rom, but dhis new phone worked just a 30 min
after flash my touch screen dont work . and imei ( imei fix ok)
i try so send a lots rom , rom accept never found error . same my touch screen dont work.
and factory rom no success.
maybe i need to edit scatter file?
maybe my touch screen is bricked?
maybe my touch screen have hardware problem?
Click to expand...
Click to collapse
Same happened to me. Have you managed to fix this issue?
anyone found solution?
same happened to me too. i've tried removing the digitizer, but i don't think the problem is in digitizer. when it's connected i can see touchscreen: ili2113a in factory mode. when i disconnect the digitizer, i can see touchscreen: (null)
so digitizer should be working. i've tried flashing like 15 roms, but didn't manage to fix the problem.
anyone found a solution?
hello
you solved?
---------- Post added at 11:45 AM ---------- Previous post was at 11:34 AM ----------
maybe not yet solved
İ have same as your problem. My device is General Mobile etab5. Calibration failed it says invalid value: 165
Hello, I decided that I will analyse running processes and figure out why is my battery not lasting more then half a day usually. For that I figured maybe running
adb shell top
will work. I could send this to a file and later make some analysis of the results. The problem is that it looks like this
Code:
800%cpu 10%user 0%nice 17%sys 772%idle 1%iow 0%irq 0%sirq 0%host
←[7m PID USER PR NI VIRT RES SHR S[%CPU] %MEM TIME+ ARGS ←[0m
28364 system 20 0 2.2G 83M 61M S 15.3 2.4 1:08.09 com.samsung.and+
31155 u0_a193 20 0 2.1G 69M 40M S 4.6 2.0 6:00.62 com.facebook.or+
30834 shell 20 0 11M 4.3M 3.3M R 2.3 0.1 0:00.85 top
3246 system 12 -8 1.6G 14M 11M S 2.3 0.4 249:18.01 surfaceflinger
26367 system 10 -10 2.7G 106M 89M S 1.3 3.0 1:14.78 com.samsung.and+
22515 root 20 0 0 0 0 S 1.3 0.0 0:03.16 [kworker/u16:4]
3825 system 10 -10 3.4G 182M 81M S 1.0 5.2 572:07.02 system_server
971 root 20 0 0 0 0 S 1.0 0.0 151:39.30 [kswapd0]
29785 u0_a209 20 0 1.7G 67M 52M S 0.3 1.9 0:03.20 com.microsoft.o+
21383 root 0 -20 0 0 0 S 0.3 0.0 0:00.84 [kworker/1:0H]
20039 u0_a213 20 0 2.9G 56M 47M S 0.3 1.6 9:15.59 com.digibites.a+
3132 logd 30 10 31M 13M 836K S 0.3 0.3 25:29.47 logd
679 root 20 0 0 0 0 S 0.3 0.0 5:34.54 [kcompactd0]
13 root RT 0 0 0 0 S 0.3 0.0 2:00.01 [migration/1]
30749 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 [kworker/u17:2]
30699 u0_a379 20 0 2.2G 98M 82M S 0.0 2.8 0:00.95 org.androworks.+
30670 advmodem 20 0 2.2G 74M 65M S 0.0 2.1 0:00.33 com.samsung.and+
30661 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 [kworker/0:0H]
30652 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 [kworker/7:2H]
30651 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 [kworker/5:0H]
the process names are cut. Is there a way to make top command write wider columns? Linux top knows -w but adb top does not.
Seems like running -b makes it wide enough but it shows all processes and not just the top few which would be enough.
I can see that it's also formatted wrong and the column headers don't match the values below. Jeez...
Firmware A11 and new updated A13 Europe Version.
I have a *.txt which permanently stores every opened app internally with timestamp and other code unknown to me. After the deletion it will be created again immediately.
The exact name of the file is: proces_reclaim_info.txt
and is located in the internal memory in the main path.
The internal logger for problems is off [*#800#], so that can't be it.
Code looks like it:
[1574173879.537943][ a.fennec_fdroid 6 -2 ],[ 0 0 1 0 ],[ 0 0 ],[ 0 0 0 ],[ 0x0 0x12c00000 1024 332 ]**
[1574173879.562996][ .qcrilmsgtunnel 6 0 ],[ 1610 72 9 1959 ],[ 17 0 ],[ 25 17 0 ],[ 0x0 0x0 1024 332 ]**
[1574173879.582098][ ndroid.keychain 6 0 ],[ 2414 248 9 1966 ],[ 7 0 ],[ 40 24 2 ],[ 0x0 0x0 1024 332 ]**
[1574173879.583457][ .qualityprotect 6 0 ],[ 1682 220 9 2053 ],[ 7 0 ],[ 16 14 0 ],[ 0x0 0x0 1024 332 ]**
[1574173879.593519][ com.coloros.sau 6 0 ],[ 2274 581 9 2150 ],[ 3 0 ],[ 55 12 1 ],[ 0x0 0x0 1024 332 ]**
[1574173879.600195][ id.defcontainer 6 0 ],[ 2067 70 9 1930 ],[ 0 0 ],[ 16 0 1 ],[ 0x0 0x0 1024 332 ]**
[1574173879.605341][ oros.appmanager 6 0 ],[ 1849 223 9 1946 ],[ 21 0 ],[ 20 11 0 ],[ 0x
any ideas?
Maybe other people have the same file in the storage?
I have the same problem as you,You delete it and then it reappears, honestly it seems to me that you send a lot of data, and this thing bothers me a lot... I'm thinking of selling the phone because this reason...
Hello
I need to get the cpu usage from my device (Lenovo Tab M8, Android os) and send it via http-request to my server.
I test it with my smartphone.
I found the app macrodroid, which can automatically send data via http-reuest. So the first step is done.
After a long searching i found the "adb shell" app. So i can test my shell command. So the second step is done
I want to use the command "top -n 1" because my devices are not rooted and i got alway "permission denied" with other commands.
The top command show a output.
THERE IS THE PROBLEM:
if i use the top command on my smarthpohne, i don't got a correct output. The %idle is always same like %cpu
if i connect my phone to my pc and run it in the windows command, it shows the correct data.
for example:
the output on the phone:
Code:
[s[999C[999B[6n[u[H[J[?25l[H[J[s[999C[999B[6n[uTasks: 2 total, 1 running, 1 sleeping, 0 stopped, 0 zombie Mem: 3.5G total, 3.4G used, 129M free, 39M buffers Swap: 2.0G total, 1.6G used, 396M free, 1.1G cached800%cpu 0%user 0%nice 0%sys 800%idle 0%iow 0%irq 0%sirq 0%host[7m PID USER PR NI VIRT RES SHR S[%CPU] %MEM TIME+ ARGS [0m[1m 7831 u0_a357 10 -10 36M 3.7M 3.0M R 4.0 0.1 0:00.00 top -n 1[m 7717 u0_a357 10 -10 33M 2.9M 2.4M S 0.0 0.0 0:00.01 sh[?25h[0m[1000;1H[K[?25h[?25h[0m[1000;1H[K
output on the pc:
Code:
Mem: 3.5G total, 3.4G used, 93M free, 40M buffers
Swap: 2.0G total, 1.6G used, 380M free, 1.0G cached
800%cpu 82%user 0%nice 124%sys 594%idle 0%iow 0%irq 0%sirq 0%host
←[7m PID USER PR NI VIRT RES SHR S[%CPU] %MEM TIME+ ARGS ←[0m
2305 u0_a357 10 -10 25G 258M 164M S 64.7 7.1 23:29.96 com.arlosoft.ma+
517 system 5 -15 1.7G 20M 14M S 44.1 0.5 207:08.58 surfaceflinger
←[mm 7844 shell 20 0 36M 4.3M 3.3M R 23.5 0.1 0:00.10 top -n 1
983 system 18 -2 12G 273M 130M S 17.6 7.5 595:30.94 system_server
←[mm 276 root RT 0 0 0 0 R 17.6 0.0 53:19.28 [decon0]
7843 root 20 0 0 0 0 S 11.7 0.0 0:00.20 [kworker/0:1]
488 system -3 -15 506M 4.3M 3.6M S 11.7 0.1 45:01.04 android.hardwar+
7385 root 0 -20 0 0 0 S 8.8 0.0 0:02.53 [kworker/u17:3]
7807 root 20 0 0 0 0 S 2.9 0.0 0:00.90 [kworker/3:2]
7542 root 20 0 0 0 0 S 2.9 0.0 0:00.00 [kworker/4:0]
2291 root 20 0 0 0 0 S 2.9 0.0 0:02.05 [kworker/u16:2]
2188 root 20 0 0 0 0 S 2.9 0.0 0:02.93 [kworker/u16:0]
7088 u0_a237 10 -10 7.4G 159M 75M S 2.9 4.3 95:05.07 com.samsung.and+
1365 radio 20 0 5.7G 43M 30M S 2.9 1.2 40:36.23 com.android.pho+
496 wifi 20 0 63M 2.8M 2.6M S 2.9 0.0 6:31.76 android.hardwar+
7757 u0_a239 20 0 4.9G 93M 79M S 0.0 2.5 0:00.32 com.samsung.and+
7745 u0_a62 20 0 4.9G 88M 74M S 0.0 2.4 0:00.17 com.sec.android+
7717 u0_a357 10 -10 33M 2.9M 2.4M S 0.0 0.0 0:00.01 sh
7628 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 [kbase_event]
←[?25h←[0m←[1000;1H←[K←[?25h←[?25h←[0m←[1000;1H←[Kstarlte:/ $ 0
how can i get this output on my device???
is it so difficult or is my question not good?
:-( i think there is no solution....