Database Info

[ROM][03/01]acurarom V7.1 V21a+b cpu stock-1.1-1.158-1.18-1.188-1.2 Ghz

Happy New Year everone!!!!!
ROM V7.1-- OC 1188
Same as V7 but all this!
Changes : Removed the LAGS. Tweaks improved in Dalvik Cache
Improved memory pressure on the Dalvik Amenta for the Ram launcher to 48 Mg Optimized RAM, now well without so many programs in RAM.
Accelerated speed 3G-WIFI - data. (Now works) enhancements in the House and its components.
V7:
The base of programs and Ginger Framework is the original 21-B of 13 December, the remainder of the 21-A. This is so for the simple reason that I did not like the way you work the 21-B. I keep the libraries of the 21-A that are very good and work well. As major developments have important operational improvement, but LAGS not, improvements in the management of the RAM and especially the elimination of losing calls without having knowledge them.
CHANGES:
Tweaks: Camera : Raise the quality of the image at 100% before to 90%. Ascent Capture mode to 33 frames in all recording formats. Changes FLASH voltjes. Control the intensity of the flash. FOCAL Changes Distortion at 0% Video Acceleration Activation DUCATI services. Reduced to 80% before Sharpness to 100%.
General: Regulated the 160xsegundo maximum events. Significant improvement in the transition of screens. retouched the Dalvik for better performance of the RAM. Much better now. VM pressure to 40 Dalvik without charge in the SWAP Without KILLERS in the RAMDISK, Android original killers. Changes in the way to mount your partitions, no more LAGS while maintaining the maximum speed as always. Reading and Writing by overclocking. Assembled partitions to EXT4. Is 40% faster than EXT3. Updated the binaries. processor overclocked to 1.18 of the standard, can be changed with the boots. Busybox. Free advertising in the programs. And fast with GPS location. RAMDISK has mounted Carrirer elimination of IQ, is a both cookie tracking.
V7.1 with go launcher:
http://min.us/mbpr42ehTd
If you want LG launcher install this after the 7.1 rom:
http://min.us/m6P44q9iC
V7.1 Boot versions: only changes CPU frequency:
Boot with OC 1.2 Ghz
http://minus.com/mycwwqBmh
Boot with OC 1.188 Ghz
http://minus.com/m9Ptz4Eet
Boot with overclock 1.180 Ghz
http://minus.com/mWL15ujyw
Boot with overclock 1.158 Ghz
http://minus.com/mcjtgjvqx
Boot with overclock 1.1 Ghz
http://minus.com/mcT57P4A2
BOOT-V7.1-without OC
http://minus.com/mW2Onj285
Also install baseband either before or after rom installation!
http://csmg.lgmobile.com:9002/swdata...00/V21A_00.kdz
This link will guide you how to flash KDZ:
http://forum.xda-developers.com/show....php?t=1287236
Thanx and credits go to tekahuna for his excellent discovery of overclock modules.
Credits also for adixtra for being the first to test the OC modules on our beloved Optimus 3D:
Thanx to the acurateam for their great rom(s)!!!
Their original page link:
http://www.htcspain.com/roms-lg-optimus-3d-384/nueva-acurateam-v7-51894/
AcuraTeam members:
Franlov
Davidn70mo
Flipado
Jechus
Macriv-(erchoquero)
Acura2201
If you like their rom(s) please donate to acura(team):
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=FA88LHD2M4R64

First impression:
Smoother than V18!

Please post the screenshot.
Tks

is this any different from this one
http://forum.xda-developers.com/showthread.php?t=1344672

Screenshot of new acurarom
Screenshot of new acurarom.
Dutch language settings is working as you may notice from the screenshot!

Cav3 said:
is this any different from this one
http://forum.xda-developers.com/showthread.php?t=1344672
Click to expand...
Click to collapse
Yes that is based on korean v18a
This is v21a european (see screenshot above)

greenbat said:
Screenshot of new acurarom
Click to expand...
Click to collapse
Thanks thanks, please some about the Home, for example have a battery%?

brambi42 said:
Thanks thanks, please some about the Home, for example have a battery%?
Click to expand...
Click to collapse
Home is still same as all other versions, no battery%. You can choose however between LG and Go launcher
Please note, I am myself using SPB Shell 3D as home screen.

Downloading.. will give feedback soon..

greenbat said:
Home is still same as all other versions, no battery%. You can choose however between LG and Go launcher
Please note, I am myself using SPB Shell 3D as home screen.
Click to expand...
Click to collapse
Ok. Thank you for all info.
I prefer to wait c_o_h.

Benchmarks Acurarom V21a european:
Quandrant standard 2836
GLbenchmark 2.1
Egypt standard 37.3 fps
Pro standard 49.3 fps
neocore 57.8 fps
nenamark1 57.5 fps
nenamark2 33.5 fps
Smartbench 2011
prod 2790
games 2940
Antutu 5294
Kwaak 3 (quake 3 android port) 57.0 fps
For comparison with older GB firmwares benchmarks:
http://forum.xda-developers.com/showthread.php?t=1334923&highlight=gingerbread+benchmarks
In summary: a few faster, a few slower.
Benchmarks are more are less unchanged.
However the screen is much more responsive in general use/homescreen compared to v18a!
I have a very snappy device now, no lag so far ))))

why, oh why in the hell you had such a stupid idea to add only spanish-english swype in this rom??
I cannot install any other version of swype even after clearing in:
/system/lib
/system/app
/dalvik-cache
/data/data

You faster posting ...jejejej
Tomorrow a new version better, faster!
---------- Post added at 12:31 AM ---------- Previous post was at 12:27 AM ----------
I think you're wrong friend in this rom there is no integrated Swype.
---------- Post added at 12:33 AM ---------- Previous post was at 12:31 AM ----------
I think I do it for Spain ROM, posting on I HTCSPAIN. But at no time has been with bad intention, enter the Swype.

No worries. I finally managed to install other version of Swype
I had to put Swype install file in system/app and installation was fine.
Sent from my LG-P920 using Tapatalk

acura2201 said:
You faster posting ...jejejej
Tomorrow a new version better, faster!
---------- Post added at 12:31 AM ---------- Previous post was at 12:27 AM ----------
I think you're wrong friend in this rom there is no integrated Swype.
---------- Post added at 12:33 AM ---------- Previous post was at 12:31 AM ----------
I think I do it for Spain ROM, posting on I HTCSPAIN. But at no time has been with bad intention, enter the Swype.
Click to expand...
Click to collapse
But this rom is already very fast!!!
Thanx acurateam!!!

For the baseband, it must be changed or automatic ?

Can I install this on my AT&T Lg Optimus 3d
greenbat said:
But this rom is already very fast!!!
Thanx acurateam!!!
Click to expand...
Click to collapse
From Canada with UNlocked Telus Sim running. Got a rooted LG p925G and was wondering if this will work for me. CUrrently running the Android 2.2 version as LG has not rolled out any further updates.
Can I go back to the orginal if I don't like this ROM?
Thanks

Baseband must be changed
Sent from my LG-P920 using XDA App

Yep
Sent from my LG-P920 using XDA App

i have your previus rom +baseband ,here you say we shoul change baseband ,but where we can find the new basband? i,m very confused.

Huawei u8120 android 2.3.3

HUAWEI U8100/U8110/U8120 ANDROID 2.3.7 ROM
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS ROM HAS CAUSED. FLASH AT YOUR OWN RISK.
UPDATE 1 BASED ON ANRYL'S ROM AND CM7 FINAL 2
Info:
Android OS version: 2.3.7
ROM Name:T-shock rom
ROM will wipe all data:yes
CyanogenMod:Yes
Kernel: 2.6.32
Working(on this rom):
RIL
Audio
Bluetooth
Wi-Fi
Wi-Fi Hotspot
Key lights
Sensors
D-pad
OC Kernel (122-710MHZ)
GPS
AGPS
Camera
Video recording
Calibration support
Not Working:
FM Radio
THE LINK:
HTML:
https://rapidshare.com/files/3560864379/CM7.zip
I HAD TEST ON HUAWEI U8120
UPDATE 2:https://rapidshare.com/files/451782268/UPDATE2.zip
WORKING:
EVERYTHING
NOT WORKING:
FM RADIO
Update 3
Link: Coming Soon

Okay, Now I test it
result will be tommorow

Where are you're sources?
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
That's anryl's Rom(look in the notification sounds)xD

no it's my rom
it looks like anryl rom!!!
ONLY THE KERNEL

t-shock said:
no it's my rom
it looks like anryl rom!!!
ONLY THE KERNEL
Click to expand...
Click to collapse
Sure,that is with the sounds^^
and Anryl's Rom Setups!

ROM
update 1 based on anryl's rom and cm7 final 2
update 2 is my rom

sdtopc works???
and some pictures ???

t-shock said:
update 1 based on anryl's rom and cm7 final 2
update 2 is my rom
Click to expand...
Click to collapse
hi,
could you, please, publish your tweaks of kernel and and another tweaks, and of cause md5 or better sha checksum. it looks very untrustworthy, together with fact, that room with root access to the device is hosted on malware dump.

fabiet0i said:
sdtopc works???
and some pictures ???
Click to expand...
Click to collapse
sdtopc works in update 1
in update 2 doesn't work
pictures look in the attach files

cobaltum's rom better

Ha, ha, ha
Lololololololololol said:
Where are you're sources?
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
That's anryl's Rom(look in the notification sounds)xD
Click to expand...
Click to collapse
Ha, look who is asking for sources. And when I asked you for your sources so as to ascertain why two roms are so similar you make like you do not know what sources are? What games are you playing mr lololololololo? i.e. Your 2.3.7 is exactly the same as anryls u8120 cm7 rc1 update 15. So I take it you do know what sources are? Copying is not a crime dood unless you forget to give credit where credit is due, i.e. your sources. Get real bro.

Great ROM thanks!
Καλη δουλεια φιλε μου

Much thing not work on update 2....
notification bar cannot open by slide way...
clock layout broken..
cant mount to pc...
camera video recorder layout broken...
and much more...

Did you do wipe data?

close
Deleted Post

hey t-shock...
why dot you just make a good rom for u8120...
the rom was great... the thing is I forgotten to wipe data...

PLEASE CLOSE THE Thread
Post Deleted

Anything news about ROMs?

[ROM] OxygenZM 1.2 [Complete]

Oxy ZM
(ICS Styled Oxygen 2.3.2)​
Oxygen 2.3.2 - with an ICS launcher and theme.
Requirements:
CM7r2 / Stock hboot
ext3 or ext4 partition (1gb recommended)
Recovery (4ext Touch Recovery recommended)
Installation:
Enter recovery. Wipe data / cache / dalvik. Flash zip file. Reboot.
Downloads:
Mod edit: download link removed.
Recommended kernel:
Thalamus r4 (modded by Island3r to include Smartass V2)- http://www.mediafire.com/download/2p5p7zxax23wh7w/isl-r4mod-kernel-bravo-2.zip
Links:
Swype themes - http://jbthemes.com/djdarkknight/daswypethemes/
Motto: "Keep it clean, keep it fast."

Oxygen ZM
Version 1.2
Updated launcher to newest version (Holo 1.1.0)
Added Caculations (replaces calculator app)
Added GalleryICS (replaces Gallery3D app)
Added FasterGPS
Version 1.1
Fixed ongoing notification text colour
Updated Google Play to newest version 3.7.13
Changed CameraICS to older version to fix panorama fc (requires app update on first boot)
Version 1.0
Oxygen 2.3.2 with a ZM ICS theme
Holo launcher
apps2sd
Update all apps (maps, music2 etc)
New market version (play store 3.7.11)
Added Adaway app
Added CameraICS app
T9 dialer
720p HW playback
init.d tweaks:
minfree handler
internet speed tweak
vm management tweak
kernel tweaks
battery tweaks
remove journalism
perfect mount options
sdcard speed tweaks
ondemand governor tweaks
build.prop tweaks:
Raise jpeg quality
Render UI with GPU
Decrease dialing out delay
Improved scrolling responsiveness
Battery saving
Increase touch responsiveness
Raise video recording quality
3G signal tweaks
Net speed tweaks
Disable black screen after call issue
Fix some application issues
Decrease wifi scan interval to save battery
And other stuff...

come on ,downloading ..

I'll try it ,thank you.

So this is basically oxygen with ICS theme and launcher?

MidnightDevil said:
So this is basically oxygen with ICS theme and launcher?
Click to expand...
Click to collapse
I would say yes

do you have any screenshot ?

can you upload a screenshot ?:cyclops:

Nice one Zed! Thanks...will try right away as soon as the rom's ready for download.

loungedogg said:
I'll try it ,thank you.
Click to expand...
Click to collapse
+1

Flashback....
Zedmarcus
.......
Because I don't see any reason to continue it if I'm honest. There was nothing wrong with the original Redux2. All I did was give it a face lift and a bit of an update, tweaking a few things here and there. It was not what I would call true development, more of a learning process to see if I could do to a rom what Mildwild was doing with his Oxygen / CM mods. And I think I accomplished that. What I'm not keen on doing is keep pumping out updates that are not really needed (ala Mildwild).
True ICS is now available in stable form (ICS BCM by dk zero cool), and at this point I don't think we need to stay on GB any longer.
Cheers
but even then, its you're choice how you wanna spend your time
Sent from my HTC Desire using xda app-developers app

you should have created this thread at the first place instead of redux2
if it is themed like redux2 from you and nothing else is changed then this would be the rom for me
only thing i missed in oxygen roms was implemented script for dalvik and a2sd
but it is not a problem i will put them manually
waiting for some screenshots

Its very nice, for now its fast and smooth will see after few days Tnx

Screenhot plz
Sent from my HTC Desire using Tapatalk 2 Beta-5

Screnshoots on my way

Robi959 said:
Screnshoots on my way
Click to expand...
Click to collapse
can you tell what is changed
i see a couple of app installed like adaway , ics camera ... or did you installed them
what about the notification bar ? any problems with it
are there any scripts included with this rom , gapps ?
---------- Post added at 01:35 AM ---------- Previous post was at 01:29 AM ----------
Yasir Javed Ansari said:
Flashback....
True ICS is now available in stable form (ICS BCM by dk zero cool), and at this point I don't think we need to stay on GB any longer.
Click to expand...
Click to collapse
as soon as they release a stable release then the development of gingerbread wont be needed but that wont happen soon
and dont tell me that there are already stable releases becouse there arent
depends how you define stable

Hmm i don't have any problems with notification bar. There is somethings that is good on this rom. In 55 minutes its used 10 - 12 % of battery wich is great for me.
Sent from my HTC Desire using xda premium

Ok, sorry I didn't clarify this last night (I was watching "Misery" with the g/f as she hadn't seen it before - great film).
I decided not to continue Redux2ZM as it was as far as it could go theme wise, and I was due for an phone upgrade on my O2 contract. I didn't want to just keep swapping in and out apps and putting a new launcher on top every release just for the hell of it. When I found out my upgrade was not due until late July I installed an ICS rom (ICS BCM), and yes it was running fast and stable for me, but it used battery like mad and nothing I did seemed to stop this. Therefore I went back to R2ZM, but I wanted a change so thought I'd try an Oxygen themed rom.
If you tried my R2ZM themed rom and liked it, this is pretty much the same but on a different base. If it's not your cup of tea that's fine, don't use it. There's lot's more rom's here to chose from. I did this for myself, and thought I'd share. I'm not doing this for praise or money, but because I like doing it.
Cheers.

Trying this now... :good::good:

Battery
Does this ROM keep the 100% after it reaches it while charging? CM7 for instance doesn't.

[ROM][PORT] Miui v4 for hd mini

This is Miui v4 i'd ported for hd mini. Rom base from Phonerty of IPlasm. Rom have bug as Phonerty and some small bug. You can test this rom and feedback here.
http://www.mediafire.com/?x9bs3y92703leb5
I'm not a developer and my Eng is too bad. I followed this guide http://forum.xda-developers.com/showthread.php?t=1499411.
You can feel Miui v4 on hd mini.
Link has been updated. Recommend use LK 27-May munjeni
Rom bug: - all bugs of Phonerty rom.
- graphics bug on gallery.
- can't change themes.
Big thanks to Munjeni, Ipaslm for Cm9 on photon and ELdaArk for test this rom.
I will edit this post soon. Now not have free time, sorry.

???
a cant root it rom ,you can help me ? ( sr my english is bad)

dstar000 said:
This is Miui v4 i'd ported for hd mini. Rom base from Phonerty of IPlasm. Rom have bug as Phonerty and some small bug. You can test this rom and feedback here.
http://www.mediafire.com/?cyu41q5ccpcdap1
I'm not a developer and my Eng is too bad. I followed this guide http://forum.xda-developers.com/showthread.php?t=1499411.
You can feel Miui v4 on hd mini.
Click to expand...
Click to collapse
I wonder why this post hasnt gotten more attention than this. Ive been looking for a truly english MIUI port and was willing to settle for GB or CM7 but youve done it in ICS and CM9! and on IPlasm's Phonerty ROM which is my daily ROM right now. WOW! Kudos man. Im currently downloading, I'll test and let you know how it goes. I know you said youre not a dev but if you can succesfully pull of this port, im sure theres a lot more you can do. Id like to encourage you to develop this further. thanks a lot!
Edit: I forgot to mention its MIUI v4!!! lol. I cant wait.

downloaded and installed, unfortunately, didn't boot. its stuck at the boot animation. I've flashed it twice. The second time, I formatted all the caches but it still didnt run. please share any ideas you might have.

ELdaArk said:
downloaded and installed, unfortunately, didn't boot. its stuck at the boot animation. I've flashed it twice. The second time, I formatted all the caches but it still didnt run. please share any ideas you might have.
Click to expand...
Click to collapse
Sorry, this my first rom and have some bugs. You can call to your devices to test when boot success. No one care about this rom and if you like this, i will sent you the last rom i've fixed bug by pm. Can't post link because not enough 10 posts.

i appreciate the quick response. will test soon and let you know. in the mean time, you could add a few screenshots and change the title of the thread to to include more info about the ROM like the base ROM. also, make ur reccomendations for the LK to use and any process you'd reccomend during the flash process in the first post. maybe that'll grab some more attention from passers-by in the forums and pull some of the big names like Munjeni in. I'm quite sure there is a demand for a ROM like this seeing as HD Mini ROMs are in short supply.
Great work again man.
---------- Post added at 10:21 AM ---------- Previous post was at 09:26 AM ----------
Dstar000, I think I've realized what the problem is: this thread is located in the wrong forum. Its in "HD Mini General" when it should be in "HD Mini Android Development". I'm sure the Admins can help you move it there. Once that happens, this ROM'll get the recognition it deserves.

ELdaArk said:
i appreciate the quick response. will test soon and let you know. in the mean time, you could add a few screenshots and change the title of the thread to to include more info about the ROM like the base ROM. also, make ur reccomendations for the LK to use and any process you'd reccomend during the flash process in the first post. maybe that'll grab some more attention from passers-by in the forums and pull some of the big names like Munjeni in. I'm quite sure there is a demand for a ROM like this seeing as HD Mini ROMs are in short supply.
Great work again man.
---------- Post added at 10:21 AM ---------- Previous post was at 09:26 AM ----------
Dstar000, I think I've realized what the problem is: this thread is located in the wrong forum. Its in "HD Mini General" when it should be in "HD Mini Android Development". I'm sure the Admins can help you move it there. Once that happens, this ROM'll get the recognition it deserves.
Click to expand...
Click to collapse
Thank you, as you see, I'm not enough posts to post on develope forum. Are you test my rom? If possible, can you post some screen shot? Hope you like it.

so, after numerous flashes and reflashes, i think i've got my bootloader sorted out finally and MIUI v4 is running! :good:
So far, I'm loving it. I was having problems with Phonerty (my Play Store wasnt working and i couldnt sync) but its all sorted out and my phoen feels brand new. and then of courese there's the beauty of MIUI, it almost looks like a new screen.
The OS is fast and responsive. I seem to have noticed a graphic bug already though: the gallery seems to spill out of the screen where it says "explore storage card" at the bottom of the screen. I'll post screenshots very soon as well as the results of my testing
Thanks again dstar000, and great work!

Screenshots
Ok, here are the screenshots. I also sent a message to the Moderator of the Android Dev forum on your behalf and I hope he'll move this thread over soon.

Bug Report
1. Capacitive buttons backlight don't work
2. Gallery layout is mixed up
3. Still some Chinese menus deep in the interface
4. Other known issues from Phonerty ROM
Still worth it though!
PS - dstar000, the thread has been moved. Congrats.

dstar000, You're going to have to get your post count up to 10 before you can post in here, but this thread belongs in the dev section, so I had to move it, even if you don't have the post count.

dstar000 said:
Thank you, as you see, I'm not enough posts to post on develope forum. Are you test my rom? If possible, can you post some screen shot? Hope you like it.
Click to expand...
Click to collapse
I can post them

Nice job !!!!! Cant wait for to test it myself. Have MIUI on my SGS2 also and LOVE IT-- hopefully it will get fixed for HD mini also and will defenitely cheer for this

Great work dstar000, thank you!
Can't start music
CPU is running on 800mHZ isn't this to much?
How could i lower the cpu mhz?
Again thank you for this rom

Workarounds
To resolve the grahical issues with the Gallery, install Gallery ICS from Play Store and set it as the default image viewer.
To apply themes, create the folder data/system/themes. You will need root access to do this so either use a root level file manager or
Download terminal emulator from the market and write:
su
cd data/system
mkdir theme
(Press "enter" after each command)
---------- Post added at 07:25 AM ---------- Previous post was at 07:11 AM ----------
LingLOng said:
Great work dstar000, thank you!
Can't start music
CPU is running on 800mHZ isn't this to much?
How could i lower the cpu mhz?
Again thank you for this rom
Click to expand...
Click to collapse
Try starting the music player again right after it crashes, if that doesn't work, try a third party music player. If that works, try flashing the ROM again. I noticed I had a lot of FCs after my first flash but less after I reflashed.
To control the CPU, search for a CPU throttle in the Play Store. I personally use CPU Tuner but some may find it too complicated.

dstar000 said:
This is Miui v4 i'd ported for hd mini. Rom base from Phonerty of IPlasm. Rom have bug as Phonerty and some small bug. You can test this rom and feedback here.
http://www.mediafire.com/?x9bs3y92703leb5
I'm not a developer and my Eng is too bad. I followed this guide http://forum.xda-developers.com/showthread.php?t=1499411.
You can feel Miui v4 on hd mini.
Link has been updated. Recommend use LK 27-May munjeni
Rom bug: - all bugs of Phonerty rom.
- graphics bug on gallery.
- can't change themes.
Big thanks to Munjeni, Ipaslm for Cm9 on photon and ELdaArk for test this rom.
I will edit this post soon. Now not have free time, sorry.
Click to expand...
Click to collapse
Hi, may ask you which miui rom you used for porting to photon... I just want to make one for desire c ? Thanks...

Very nice rom !
However, i managed to encouter some problem.
First, i don't know why, but this rom can't give me access to superuser/root permission.
Then some apps began to be quite buggy, with lots of graphical issue whenever a new window in the prog had to pop up.
And last, i had a "black screen" default (which needed batery removal and all that to reboot), just after i had a received a sms.

fumasaku said:
Very nice rom !
However, i managed to encouter some problem.
First, i don't know why, but this rom can't give me access to superuser/root permission.
Then some apps began to be quite buggy, with lots of graphical issue whenever a new window in the prog had to pop up.
And last, i had a "black screen" default (which needed batery removal and all that to reboot), just after i had a received a sms.
Click to expand...
Click to collapse
I encountered all of those bugs as well. I think its because MIUI handles permissions in a slightly different way from non-MIUI ROMs. I had the black screen twice in one day but havent had it since. I know it happens a lot less or not at all in 2G mode. I think it goes back to Munjeni's Phonerty ROM which is the base for this port. I'll look through that thread to see if there are any solutions.

ELdaArk said:
I encountered all of those bugs as well. I think its because MIUI handles permissions in a slightly different way from non-MIUI ROMs. I had the black screen twice in one day but havent had it since. I know it happens a lot less or not at all in 2G mode. I think it goes back to Munjeni's Phonerty ROM which is the base for this port. I'll look through that thread to see if there are any solutions.
Click to expand...
Click to collapse
Not (Munjeni's Phonerty ROM!).. "it's two difficult ROMs"
Munjeni's ROM name for htc mini is simply CM9 4.0.4 htc mini. http://forum.xda-developers.com/showthread.php?t=1625638
but Phonerty is mine (iPlasm), I name it that [Photon+Liberty=?] http://forum.xda-developers.com/showthread.php?t=1756672
simply different we can say Phonerty is a Liberty ROM (a copy of htc aria) with munjeni's drives.
but munjeni's ROM like a native htc mini (Photon), but it's also taken on Liberty for Android.

iPlasm said:
Not (Munjeni's Phonerty ROM!).. "it's two difficult ROMs"
Munjeni's ROM name for htc mini is simply CM9 4.0.4 htc mini. http://forum.xda-developers.com/showthread.php?t=1625638
but Phonerty is mine (iPlasm), I name it that [Photon+Liberty=?] http://forum.xda-developers.com/showthread.php?t=1756672
simply different we can say Phonerty is a Liberty ROM (a copy of htc aria) with munjeni's drives.
but munjeni's ROM like a native htc mini (Photon), but it's also taken on Liberty for Android.
Click to expand...
Click to collapse
My bad! thanks for clearing that up.

[DRIVER][N9005][KK/LP] Qualcomm Adreno 300/330 drivers

KitKat (AND NOT LOLLIPOP):
These are based on the hammerhead/deb/flo/mako developer drivers from HERE.
Version: OpenGL ES 3.0 [email protected] [email protected] JHICKS_AU_LINUX_ANDROID_KK_3.5.04.04.02.003.389+PATCH[ES]_msm8974_KK_3.5__release_ENGG ([email protected])
What I did:
I copied the deb-flo-mako firmware folder ingredients into the hammerhead ones to have all firmwares updated which are included in the stock system folder, too and moved the firmware folder from /vendor to /etc. I modified the updater script, too to be sure it finds the right system drive and mounts it nicely.
Download: HERE
CHANGELOG
Lollipop (AND NOT KITKAT):
EDIT: Link taken down for now due to HW+ problems @ video playback!
New Lollipop driver v95 from Moto G extracted by SeannyM: OFFLINE for now!
Version: OpenGL ES 3.0 [email protected] [email protected] ([email protected])
AnTuTu before: ~41200ish and after ~42600ish
HOWTO:
Flash via Mobile Odin or TWRP/CWM.
WARNING:
NO GUARANTEE THAT IT WON'T KILL YOUR PHONE!!! Mine still works and that better than ever, but if it does, your fault! ^^
MAKE A BACKUP IF YOU FEAR A DEAD PHONE!
KNOX 0x1!!!!
My intention is/was to fix several bugs in their drivers to get Dolphin Emulator run nicely.
It became way better already, but is still badly distorted on KitKat.
The added Lollipop driver fixes most hiccups. Looks really nice now.

What is this?

I can try it, but still have my thoughts about it, because of the port-ism of it. Will try when the green light for this has been lit. Still why don't we massively contact the dolphin developer?

sonicadvance1 from the Dolphin dev team recommended to always update the Adreno drivers, because they are buggy as hell in OpenGL ES 3 matters. He filed a dozen bug reports over at Qualcomm's and some even were fixed by now. Some bigger ones causing the bad distortion are still there, but it starts to progress well. These are NO Dolphin bugs, these are evil misbehaviors in the drivers against the OpenGL ES 3 standards causing flipped framebuffers and way more funny things. The drivers work and are 100% compatible to the Adreno we use.
Video from sonicadvance1 explaining the steps to do.

So how do we install it? By manually move the files over to the system file or is it a flashable zip file?
---------- Post added at 07:41 PM ---------- Previous post was at 07:32 PM ----------
Ok my bad its a flashable zip files sorry for the noob questions

MxFadzil92 said:
So how do we install it? By manually move the files over to the system file or is it a flashable zip file?
---------- Post added at 07:41 PM ---------- Previous post was at 07:32 PM ----------
Ok my bad its a flashable zip files sorry for the noob questions
Click to expand...
Click to collapse
Flashable ZIP file. Use Mobile Odin OTA/ZIP File mode or a custom recovery.

I can decide for flashing ? Will this help for performance and battery too ? or is it only driver ?

This thread gets my attention. Any mirror?
Thanks

it worked for me thnx
---------- Post added at 04:42 PM ---------- Previous post was at 04:42 PM ----------
King ov Hell said:
I can decide for flashing ? Will this help for performance and battery too ? or is it only driver ?
Click to expand...
Click to collapse
it's got nothing to do with battery................read!!!

How i know which driver i use now because i wont replace drivers if is same does i can use this on any rom?

flashed and works fine, n900t
mokee open source rom 4.4.4
gonna test some stuff now
ok so some quick testing done and... no difference in game performance in fpse, espxe and reicast. same games, same speed issues and glitches.
example. silent hill 1 on fpse or espxe, bar in the beginning of the game, especially fight with a bat. same framedrops.
so not sure if there is any benefit.
thanks anyway.

Flashed....!!!
So, I have flashed it and it's successfully done, now dear dev can you tell how to feel the difference, will it improve the benchmarks, or will it improve graphics, plz share.

Changes are HERE. It won't help much in performance matters, mostly there are bugfixes and stability improvements.... yet. As soon as there's another new one, I will make it available here, too. At least Qualcomm seems to progress quite well in fixing the big flaws still left. These wont just help Dolphin, PSX emulation uses framebuffers, too. So, it might fix stuff here, too. Mostly any app which REALLY uses OpenGL ES 3 will benefit of that new one.

BLiNKT said:
How i know which driver i use now because i wont replace drivers if is same does i can use this on any rom?
Click to expand...
Click to collapse
Sorry, I overread that. I tested it on OFFICIAL FW with some modifications, like dumped KNOX crap and root + Ultimate Kernel. It should run on ANY Touchwiz ROM based on the official Version or S5 ROM. AOSP/AOKP... no clue. Never tested. Open Dolphin About page or Antutu Device Information page and check if the driver version it shows there is the one you can read above. If not... then the pathes are different there and it needs fxing.

No problems on NG1 odexed. Used for over a week, i have seen no difference so far.

i'm planing to test it on liquidsmooth 3.2.
but i have checked in antutu and my n3 have version of driver OpenGL ES 3.0 [email protected] [email protected] which is newer than OpenGL ES 3.0 [email protected] [email protected] as i understand so i will not try this one
that's why in latest liquidsmooth aosp rom have good camera photos now

On xxuend3 442 are working just fine. All my gta games are higher frames now, gameplay is better now.
Note 3 rooted knox 1, my last Samsuck crap. I want freedom. Stay away from Samsuck!

Can be flashed on AOSP? Or must use stock?

Yeah, already included in CRASH ROM V17 Testing

bibiner said:
Can be flashed on AOSP? Or must use stock?
Click to expand...
Click to collapse
On stock you can, on aosp you can try.... But backup first
Note 3 rooted knox 1, my last Samsuck crap. I want freedom. Stay away from Samsuck!