Sorry guys but I am very confused about some fundamental basics in the Android customization world. I understand that rooting a device simply unlocks it with optional enhancements. Installing a ROM changes system properties for customization or further enhancement.
Where does kernal fit in?
If Asus releases a new OTA firmware, do I have to reverse the rom AND root before installing the OTA update? Or do I simply have to reverse only the rom before the update? Or do I simply have to reverse only the root before installing the update?
I used BRK's pure root method on my Transformer last week. I've been thinking about installing Revolver or Prime roms on my Transformer, but I am reading that Asus is releasing a new firmware OTA over the next week or two, which leaves me a bit lost on what to do. Do I reverse the root before getting the OTA? Do I keep the root and get the OTA? Do I apply Prime/Revolver rom before the OTA? If I apply Prime/Revolver now, do I have to reverse that before getting the OTA?
My end goal by the end of this month is to get the latest firmware AND have Prime/Revolver rom on my tablet. Please advise on the simplest, straightforward method. Thanks for everyone's patience.
IMO.......(I said mine). Wait until the custom roms come out based on the current update. Hopefully it will solve some of the stupid bugs 3.2 introduced. Then install CWM and then a custom rom of your choice. I recommend Prime but thats what I use. Try them both or just stay stock with root.
No need to due all the switching back and forth since the ASUS update will be the basis of the new custom roms. One overwrites the other
A kernel in basic term link OS and software to phone's hardware.
Usually when Asus release an update, doesn't take very long for one of the dev to
incorporate it into a custom ROM. If you want to run Prime or Revolver I say go ahead and flash it.
Does that mean I can leave my root alone and just continue to apply updates from whatever rom that I use? So new Asus firmware updates will be incorporated into roms? For example I can expect to get Asus updates through prime or revolver, and never have to download directly from Asus again? That's assuming revolver and prime continue getting developed of course.
Sent from my SCH-I510 using Tapatalk
They mean rather than getting OTA updates from ASUS, wait a while after an official update has been released by ASUS and keep checking the Prime and Revolver threads for an updated version from the devs.
The updated custom roms will include the ASUS update.
But it means waiting longer for each update, as you will have to wait for the XDA Devs to incorporate the new ASUS update into their custom prime or revolver roms.
But it means you can leave ROOT alone if you want.
ROOT is not specifically "Unlocking" the device, it is giving the user, and apps ROOT Access to the ROOT Filesystem. So apps that need to access or modify the filesystem, can. Stock non rooted devices such as mine, have no access to the root filesystem - which is good and bad.
Good because you have much less chance of bricking the device, and you continue to get OTA (Over The Air) updates.
Bad because certain very useful programs can not be used, such as Adblocking apps.
Personally I find official updates, and a stock device have more advantages than rooting it and having to use custom roms which may have multiple problems and no official solution.
Ok ill put it in easy to understand terms
Kernel = Bios
rom = windows
root = file write access.
drksilenc said:
Ok ill put it in easy to understand terms
Kernel = Bios
rom = windows
root = file write access.
Click to expand...
Click to collapse
+1. Good way to put it for new users, since everyone understands Windows.
The kernel is like a manager. It is what starts all the hardware and software of the tablet. It makes everything you click and do work. All the underlining things you don't see happen is mostly the kernel.
Rom is just the OS. The user interface, the apps you use, etc. It's the same as Windows or Mac OSX. (not the same functionality, but the same concept/idea)
Root is a bitter-sweat deal. It allows you to customize your device more and use apps like Titanium Backup, Adblock, and other system improving apps. The bad thing is, if you don't know what your modifying in the root system, you could mess up your device. Usually a backup restoration can fix this or you can find help here. I got my first Android phone, the Droid 1, on a Wednesday, by Saturday I was rooted and running roms. Like everything, rooting has its risks, you just have to be careful and smart. Don't download sketchy apps that ask for root access. I try to only use root apps that are mentioned on XDA or from a trusted dev. (usually someone on XDA)
I mentioned back restoration. That is done from a custom recovery. The one we use is called ClockworkMod. Essentially what it is, is a installer and backup combo. Through it, we can install roms, themes, and system edits. We can also backup our current system, so that if anything goes wrong, we can go back to before we hit that problem.
When Asus updates the firmware, it's better to wait for a dev (in our case, Roach) to release a prerooted version. Just makes it easier for us, since we can just flash (install) it without having to go back to stock and all that jazz.
Welcome to Android. Always nice to have someone new join our gang.
Kernel, this one i posted on another forum
Originally Posted by life64x View Post
A kernel is simply a director for the computer in movie analogy. It controls the scripts( what gets done and how), the cast(Bluetooth , video, Internet so on), and production( who goes where, how and why.) it is the main software that gets loaded and talks to other software for hardware( such as video output, phone dialing drivers etc.). Every operating system is a kernel. ALL other software in the phone, no matter what is..is the supporting cast. In a nutshell, it is what guides, and makes computers work with other parts of it..both hardware and software.
A rom is a storage file for all the GUTS of the software, bootup stuff, stock or modified items dealing with user interface and other software. it is bundled together to make it one complete unit so you dont have to do files individual to install, tweak and what have you. This is a real bad description of what a rom is, but dont want to confuse you. Instead of having files all over the place, it is in a form much like a box.
"My end goal by the end of this month is to get the latest firmware AND have Prime/Revolver rom on my tablet. Please advise on the simplest, straightforward method. Thanks for everyone's patience."
Simplest reply to this is..
1. Install custom firmware pf your choice now.
2. When the newest version of your rom comes out. Install.
Thank you everyone. That was made clear as crystal. I will install a rom and get updates through them. I'm leaning toward revolver for ota updates.
Sent from my SCH-I510 using Tapatalk
Would appreciate some clarification about the rooting thing. I've read and rooted my HTC sensation...S-off and clockwork. Have a few questions that I would like to clear up:
1) when a new OTA update is available for example...can I actually just install that instead of flashing a rooted ROM? I understand that I will lose root...but can't I just reflash the superuser file to obtain root again? Or must I use a rooted ROM or custom ROM.
2) right now, I am using the ROM that came with the phone and only went through the rooting process. If I want to keep this ROM as an original so I can go back to...do I have to back up this one now? I've done a Nand backup in clockwork before I rooted it as instructed...can I simply use that and then flash the SU file again if I ever want if I want to stay on this current ROM after I change it?
3) I performed backup using titanium backup including apps and system data...does that include all the contacts info?
4) finally, what exactly is Radio and Kernel? Do I need to change it...from what I read, if things are working...I don't need to change anything right?
Thx for clarifying this. I've read various threads but haven't gotten a clear answer to these questions.
newr said:
Would appreciate some clarification about the rooting thing. I've read and rooted my HTC sensation...S-off and clockwork. Have a few questions that I would like to clear up:
1) when a new OTA update is available for example...can I actually just install that instead of flashing a rooted ROM? I understand that I will lose root...but can't I just reflash the superuser file to obtain root again? Or must I use a rooted ROM or custom ROM.
2) right now, I am using the ROM that came with the phone and only went through the rooting process. If I want to keep this ROM as an original so I can go back to...do I have to back up this one now? I've done a Nand backup in clockwork before I rooted it as instructed...can I simply use that and then flash the SU file again if I ever want if I want to stay on this current ROM after I change it?
3) I performed backup using titanium backup including apps and system data...does that include all the contacts info?
4) finally, what exactly is Radio and Kernel? Do I need to change it...from what I read, if things are working...I don't need to change anything right?
Thx for clarifying this. I've read various threads but haven't gotten a clear answer to these questions.
Click to expand...
Click to collapse
1. You could, but the ota could include some security changes or something making it hard to achieve root again. Easiest to just flash a pre rooted ROM that includes the updates
2. Yes that would work, but why not create a backup after root instead?
3. Tb can backup contacts, but the file might not be compatible with newer roms due to software changes. I just let google keep mine, that way the ROM doesn't matter
4. by radio we mean the software that is connecting your phone to the mobile network using the physical radio. Sometimes newer version can be more effective, and some are region specific. Between the radio and the ROM is the ril (radio interface layer), which helps the two interact. The kernel is the layer of software that directly controls the hardware of the phone (battery drain, cpu frequency and governor, all that stuff). rarely is changing any of that stuff necessary, but some of us just want to tweak everything we can
Thx for the clarification.
What to you mean by pre-rooted ROM? Wouldn't I need a rooted ROM now that my phone is rooted or it'll lose root?
As for the backup...yeah.. so if I perform a NAND now..it would be a rooted version of the ROM right? And it'll have all the contacts as well?
Thx
newr said:
Thx for the clarification.
What to you mean by pre-rooted ROM? Wouldn't I need a rooted ROM now that my phone is rooted or it'll lose root?
As for the backup...yeah.. so if I perform a NAND now..it would be a rooted version of the ROM right? And it'll have all the contacts as well?
Thx
Click to expand...
Click to collapse
I meant when an update comes along, instead of all the effort of UN rooting, updating, and re rooting, just wait for a dev to post a ROM with the update cooked in. Much easier, less work = less risk of a problem.
And yes
Hey all! This is my first time rooting an android device (Galaxy tab 10.1 N8013 in USA), and I wanted to first say thanks for all of the super helpful walk throughs!
My main reason for posting to ask a question is just to get a final answer concerning the german JB ROM for the 8013. I'll just bullet my concerns:
1. If I flash using PC Odin, I will not have to root my device. From there, I will be able to install the multiwindow application from TheSanitarium. However, the cons of this (depending on your view), are that one cannot get OTA updates, and may need to install an app to set the device to show that it is not modified. Is this correct?
2. If I desired to use this application: http://forum.xda-developers.com/showthread.php?t=2069173, what ROMs fit this criterion: "You need to be on a rooted deodex XXCLL3 ROM preferably unmodified framework files."? I noticed some posters said they are running redemption in their posts in that subject, and that in the youtube video from the first post the, "Dr Akrim" MOD is mentioned
3. Alternatively, if I use this method for multi-windowed apps: http://forum.xda-developers.com/showthread.php?t=2079807, do I just need to flash to the German 4.1.2 ROM WITHOUT a root? And if so, will I need to get triangle reset? And if I go this particular path, and I desire to get back to the 4.0.4 build, I just flash to the stock from samfirmware (with Odin)?
3. If I do need a MOD, I'm hoping to keep s-pen function witth evernote, mind mapping apps, lecture notes, s-note, and be able to watch videos or open gmail while taking notes as I peruse presentations (I work in the medical field, and bought this tablet with this in mind). Which ROM will allow me to do that?
4. Last, just asking for a confirmation I have this right (I have referenced the how to guides). If a root is necessary, follow the advice here: http://forum.xda-developers.com/showthread.php?t=1831152 with the clockwork MOD so I can restore my device if it bricks. From there, download PC Odin, and then upgrade to german JB from: http://forum.xda-developers.com/showthread.php?t=2016792. Is this all correct?
Thanks all!
IMO #3 is the way to go. You don't need root to flash the ROM, but you'll need it for the program itself to actually work. But that's super simple with http://forum.xda-developers.com/showthread.php?t=2050297
midas69 said:
IMO #3 is the way to go. You don't need root to flash the ROM, but you'll need it for the program itself to actually work. But that's super simple with http://forum.xda-developers.com/showthread.php?t=2050297
Click to expand...
Click to collapse
Thanks for the reply!In regards to using ExynosAbuse APK v1.40, I'm reading at the end of the comments that some people are showing modified devices. If that happens, should I just flash a stock ROM? I found one in the forums.
hradeksign said:
Thanks for the reply!In regards to using ExynosAbuse APK v1.40, I'm reading at the end of the comments that some people are showing modified devices. If that happens, should I just flash a stock ROM? I found one in the forums.
Click to expand...
Click to collapse
It will show custom because you're running a ROM not designed for your device. It will show modified because you're rooted. Triangle Away will get rid of the modified. But if you flash a stock ROM you'll lose the capabilities you're trying to achieve, at least until they release 4.1.2 for the 8013.
Hello
(sorry for my english)
I'm a noob in this world and i need some help.
In the past few days i've been reading a lot of posts in this forum but to a noob it's a little bit hard to understand somethings.
So, i'm using this topic to ask some questions. If there is another thread that answer all my questions and explain things for a newbie, feel free to tell me and apologize to create this new thread.
I have a smartphone android, Galaxy S2 with android 4.1.2, all locked to the provider (I know that there is a specific forum for this smartphone and i read some threads).
Now, i want to make it a ROOT and maybe try new ROM's.
Let's start with the questions:
-To make a root, it's better with kernel exchange or with a simple file?
-In the future, if i want to install another ROM, having the root made from the kernel that is with the phone (using a file in the SD Card) may cause some problems? To do this it's better to go to root insecure kernel?
-Why i need to change kernel? which is the benefits?
-It's possible to restore to the previous kernel?
-What are necessary to backup the ROM that actually i have?
-Changing one time the kernel, i can install all the roms i want or i need to install another kernel's?
Thank you for your atention, and one more time, sorry for my english!
@pedrocrv,
Your English is fine! Don't worry about that, man.
Here is my opinion.
Generally speaking, you don't need to replace your kernel. Replacing the kernel can both drastically change your device's performance for the better, as well as render your device completely unusable, which in Android terminology is called "bricked". If your device is "bricked", it is completely useless as an electronic device, making it nothing more than a brick.
But to get back on topic, it's normally only developers like myself who need to replace the kernel, and even then only every once in a while. It's somewhat unsafe for new users, because one little mistake can lead to a huge problem. Trust me, I've seen them here on XDA myself. Don't become one of them.
However, using and flashing ROMs is a whole different story. ROMs normally change aesthetic parts of your device, like the look and features. If you follow the instructions given to install the specific ROM very well, it is practically impossible to brick your device.
If you find a good ROM, go for it. It's almost definitely going to change your device in a very good way.
So to wrap up this post, basically (for you):
Replace the kernel = bad idea, don't do it until you have more experience
Install/flash a ROM = a great idea, go for it if you find a nice one!
The most important thing to remember, however, is to m a k e a b a c k u p. Once you make a backup, you can mod your system however you want without fear of bricking.
Hope this helps.
@thenookieforlife3
Thank you for your explanation!
I understand what you said, but in one thread of my smartphone i see a lot of people talking about rooting their phones but for this is needed to use another kernel.
I want to root my device, and in a near future maybe install one ROM of CyanogenMod (and try others too), but i'm afraid of rooting because that story of changing the device kernel and using Odin... I don't want a brick
Another question:
If i find a file to root my device without Odin, but i don't have the 100% that it's the file indicated for my device, there is some problem if I try to root with that?
And, as i see, there is some diferent files, how i choose one? it's indifferent or one file have specific itens that another don't have?
Thanks a lot!
pedrocrv said:
@thenookieforlife3
Thank you for your explanation!
I understand what you said, but in one thread of my smartphone i see a lot of people talking about rooting their phones but for this is needed to use another kernel.
I want to root my device, and in a near future maybe install one ROM of CyanogenMod (and try others too), but i'm afraid of rooting because that story of changing the device kernel and using Odin... I don't want a brick
Another question:
If i find a file to root my device without Odin, but i don't have the 100% that it's the file indicated for my device, there is some problem if I try to root with that?
And, as i see, there is some diferent files, how i choose one? it's indifferent or one file have specific itens that another don't have?
Thanks a lot!
Click to expand...
Click to collapse
like Thenookieforlife3 said you do not need a kernel, you dont need one to root or install roms/custom recovery's, they are just for tweaking things or being able to overclock. So, first of all, you are going to have to tell us your model number (or which carrier your phone is on) so we can direct you to the right root guide, s2's are fairly easy to root so dont be scared we will hold your hands the entire way!
Trozzul said:
like Thenookieforlife3 said you do not need a kernel, you dont need one to root or install roms/custom recovery's, they are just for tweaking things or being able to overclock. So, first of all, you are going to have to tell us your model number (or which carrier your phone is on) so we can direct you to the right root guide, s2's are fairly easy to root so dont be scared we will hold your hands the entire way!
Click to expand...
Click to collapse
This. ^
We can definitely give you a hand, but we do need a few details to make sure everything works out.
hello again!
@Trozzul and @thenookieforlife3,
Thank you!
So there is the information asked for: (see the attachment for more details)
Bandbase: I9100BULS1
Kernel: 3.0.31-889555 [email protected] #3 SMP PREEMPT Thu Jan 31 14:48:54 KST 2013
Compilation Number: JZO54K.I9100XWLSD
I have another questions to do:
-What vary from file to file on root?
-What is a AOSP ROM? Where I can find a rom that is almost empty of trash, like i think it is a Stock Rom?
-In the information given above, wich is more important to see if I can install that rom? Can I install a rom that is not XWLSD?
Many thanks!
Answers to your questions are in red.
Thank you! You're very welcome!
So there is the information asked for: (see the attachment for more details)
Bandbase: I9100BULS1
Kernel: 3.0.31-889555 [email protected] #3 SMP PREEMPT Thu Jan 31 14:48:54 KST 2013
Compilation Number: JZO54K.I9100XWLSD
I have another questions to do:
-What vary from file to file on root? Normally not much changes from root method to root method - basically, if anything does, it's negligible to you, meaning that it won't really matter. What does matter is that the root method actually roots your phone.
-What is a AOSP ROM? ASOP stands for Android Open Source Project, and it pretty much means that it's a ROM that is as minimalistic and "free of trash", as you say, as you can get it.
-Where I can find a rom that is almost empty of trash, like i think it is a Stock Rom? Here are a few good ones:
AOSP NeatROM for S2
CarbonRom KitKat for S2
SuperNexus for S2
-In the information given above, which is more important to see if I can install that rom? Can I install a rom that is not XWLSD? The ROMs that you can install will be labelled "S2" and "I9100". Don't try to install any other ROMs unless they have those labels.
Hope these help!
I understand what you said!
For example, the AOSP NeatROM have a version that is not AOSP. What it means?
To Install other ROM's i need to root first?
And now, how i simply root by a file?
@pedrocrv,
Answers to your questions in red.
For example, the AOSP NeatROM have a version that is not AOSP. What it means? That means that there is another version of that ROM that is more full of extra features, a.k.a "trash".
To Install other ROM's i need to root first? Yes.
And now, how i simply root by a file? It depends from method to method - some methods are apps that you install and then hit a "big red button", some methods are files that you have to flash through a custom recovery, for example, ClockworkMod. Basically, just read and follow the instructions that come with each root method.
again, thank you!
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done?
how I know that i need a custom recovery? mine doesn't work?
what is flashing?
Thank you for your attention!
@pedrocrv,
Once again, answers to your questions in red.
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done? Yes, that's right.
how I know that i need a custom recovery? mine doesn't work? The rooting method will tell you in the instructions whether or not you need a custom recovery, and if it does, it will tell you which one to use and how to use it.
what is flashing? Simply put, flashing is installing a file (normally a .zip) that has been specially formatted via a recovery method (custom or stock).
Thank you for your attention! No problem!
thenookieforlife3 said:
@pedrocrv,
First, please make sure to hit "Thanks" on each of my helpful posts.
Once again, answers to your questions in red.
So, if i find some thread that talk about a file to root, it's just follow the instructions and it's done? Yes, that's right.
how I know that i need a custom recovery? mine doesn't work? The rooting method will tell you in the instructions whether or not you need a custom recovery, and if it does, it will tell you which one to use and how to use it.
what is flashing? Simply put, flashing is installing a file (normally a .zip) that has been specially formatted via a recovery method (custom or stock).
Thank you for your attention! No problem!
Click to expand...
Click to collapse
im sure we should introduce him to cyanogenmod, cyanogenmod can be more stock than Asop most of the time, Asops nice but there are most of the time little additions that the creator likes, plus if cyanogenmod installer is compatible for your device he shouldn't have todo much!
@pedrocrv , im not trying to steal his thunder but im trying my best to explain it to you too if he left anything out, otherwise if you guys want me to i will back out .
Custom recovery's are basically a way of getting out of a bad spot and being able to Flash new Roms, if you get stuck in a bootloop (stays stuck at the samsung screen for a very long time, the first time you flash a rom you should let it sit for it can take awhile for the first time you turn it on.) you can most likely get out of the problem and be able to backup your stock firmware if you decide you dont like rooting/custom roms, it does stuff the Stock recovery does not do.
Flashing is basically as thenookieforlife3 said its so you can install Roms, when you hear the term flashing think "installing".
@Trozzul and @thenookieforlife3,
Thank you for both atention! i'm learning a lot of things with both of you!
I know cyanogen, and as i search in the wiki of cyanogen page i think my phone is compatible.
What I need to do with the installer? And if i use the installer, how I backup my actual ROM to future problems or needs to come to origins?
stock ROM-> My actual ROM?
Custom ROM-> a new one
So, if i understand everything:
With my actual recovery i'm not able to install other ROM's. But, with my recovery, i'm able to root my device unless the root method needs a custom recovery and it say's how to install it right?
With the root by my recovery, i'm able to install other ROM's but I will need to further install a custom recovery right?
Many thanks :good:
pedrocrv said:
@Trozzul and @thenookieforlife3,
Thank you for both atention! i'm learning a lot of things with both of you!
I know cyanogen, and as i search in the wiki of cyanogen page i think my phone is compatible.
What I need to do with the installer? And if i use the installer, how I backup my actual ROM to future problems or needs to come to origins?
stock ROM-> My actual ROM?
Custom ROM-> a new one
So, if i understand everything:
With my actual recovery i'm not able to install other ROM's. But, with my recovery, i'm able to root my device unless the root method needs a custom recovery and it say's how to install it right?
With the root by my recovery, i'm able to install other ROM's but I will need to further install a custom recovery right?
Many thanks :good:
Click to expand...
Click to collapse
Yes your stock rom is what the device comes with when you buy it. every device method of being able to get custom roms is different, so when you do get a new phone always do your research, sometimes you can root it and dont need a custom recovery (thats only if you want to stay on stock rom) sometimes you need a custom recovery to get root. with my S2 what i needed todo was get a custom recovery first, installing cyanogenmod already comes rooted so you can make a backup of your stock rom without rooting it.
so i dont also exactly know which device you have, where are you from? it looks spanish in your phones setttings with that screenshot, region is important. is it a GT-i9100 or a GT-i9100b? take out the battery and tell us what the model number says there. this is important for the cyanogenmod installer.
Trozzul said:
Yes your stock rom is what the device comes with when you buy it. every device method of being able to get custom roms is different, so when you do get a new phone always do your research, sometimes you can root it and dont need a custom recovery (thats only if you want to stay on stock rom) sometimes you need a custom recovery to get root. with my S2 what i needed todo was get a custom recovery first, installing cyanogenmod already comes rooted so you can make a backup of your stock rom without rooting it.
so i dont also exactly know which device you have, where are you from? it looks spanish in your phones setttings with that screenshot, region is important. is it a GT-i9100 or a GT-i9100b? take out the battery and tell us what the model number says there. this is important for the cyanogenmod installer.
Click to expand...
Click to collapse
No i'm from portugal
so:
Model: GT-I9100
SSN:-I9100GSMH
Wich is the diference?
pedrocrv said:
No i'm from portugal
so:
Model: GT-I9100
SSN:-I9100GSMH
Wich is the diference?
Click to expand...
Click to collapse
There's very little difference between the i9100 and the i9100b, but the difference is enough that there is a separate CyanogenMod installer for both models.
thenookieforlife3 said:
There's very little difference between the i9100 and the i9100b, but the difference is enough that there is a separate CyanogenMod installer for both models.
Click to expand...
Click to collapse
@thenookieforlife3 i think the cyanogenmod installer installs a CWM right for his question on it? also look at these stated on the Cyanogenmod wiki for the GT-i9100
WARNING:
Some second-generation Samsung Exynos devices are potentially susceptible to a "superbrick" caused by performing a factory reset with the stock kernel, which effectively kills the internal memory in the device. It is highly recommended you do not perform this operation while using a stock kernel for safety reasons. To make sure you aren't running the stock kernel (only needed when coming from the stock ROM), fully install CM without performing a factory reset and reboot to recovery before you perform the factory reset.
WARNING:
If you used a non-official method to remove a provider lock, your /efs partition may become corrupt! It is highly recommended you make a backup of this for safe keeping before attempting to modify your device, especially if you plan to remove such a lock.
WARNING:
The newest Gapps package (20140606) is too big for the /system partition of i9100. Please use the 20140105 package instead. This message will disappear when this is resolved.
Click to expand...
Click to collapse
Should we tell him to run a benchmark and tell us his CPU?
@pedrocrv (Edit:https://play.google.com/store/apps/details?id=com.antutu.ABenchMark download this app real fast and tell us what CPU you have) so the cyanogenmod installer will be the easiest thing for you, even though installing a custom rom is insanely easy this is basically a one click method, note that all of your data will be deleted so back that up somewhere where you can save it and put it on your phone when its done installing. so as i asked thenookieforlife3i believe that the cyanogenmod installer will also install the latest and best custom recovery for you (CWM: Clockworkmod will be a huge term like CM: Cyanogenmod you will hear a lot, they are both very popular for being the most stable.) it would be stupid enough for it not to install it as well, but if it does not we will show you an easy app that will install a custom recovery, basically one click just like cyanogenmod. now as i looked on the cyanogenmod site, the installer IS compatible with your phone and will install a Stable version of Cyanogenmod 10.2 which is android 4.3. note that the highest right now is CM 11 which is android 4.4.4 kit kat but right now is what we call a "Nightly".
i will try my best to explain this to you, there are four stages that cyanogenmod puts out i will rate them from lowest to highest: "experiments" "snapshot" "nightly" and "Stable", you only need to worry about nightly and stable, Stable is basically the final product the last update for that android version so its the most stable and with less bugs and this is what you want to aim for, Nightlys are Nightly generated updates that update bugs every night asked by people like us to be fixed, Honestly Nightlys are Very stable and are perfectly fine.
Now you might like Cyanogenmod 10.2, personally a lot of my phones run 10.2 if its available, you might like kit kat (Cyanogenmod 11) better instead, honestly try out 10.2 first and if you dont like it, you can update to Cyanogenmod 11 (they push updates out like how samsung would push out updates.) without deleting your information on CM 10.2, im sorry if i confused you at all please ask a lot of questions if needed!
Trozzul said:
@thenookieforlife3 i think the cyanogenmod installer installs a CWM right for his question on it? also look at these stated on the Cyanogenmod wiki for the GT-i9100
Should we tell him to run a benchmark and tell us his CPU? …
Click to expand...
Click to collapse
Yes, installing CyanogenMod installs ClockworkMod as the default recovery.
Yes, let's have him run a benchmark and tell us the results.
@thenookieforlife3 and @Trozzul
Again, thank you for your patience!
I'm now running the benchmark!
Let's put new question's..
-With CM 10.2, it comes with root, and how to unlock the SIM?
-With CM 10.2, in wich phase of the installation I will be able to backup my stock ROM?
-Imagine that after sometime I want to go back to my stock ROM, What I need to do, because i will have another recovery?
-WIth the CM 10.2 I will have my RAM memory more free?
In the attachment are the images of the test
thank you again!
Pedro
@pedrocrv,
As always, answers to your questions in red.
-With CM 10.2, it comes with root, and how to unlock the SIM? @Trozzul, if you'd please answer this question, that would be great, because I don't know much about SIM unlocking.
-With CM 10.2, in wich phase of the installation I will be able to backup my stock ROM? You will want to make a Nandroid backup before you do anything at all in relation to rooting and CyanogenMod.
-Imagine that after sometime I want to go back to my stock ROM, What I need to do, because i will have another recovery? You will use either the "Install update from SD card" or the "Install .zip from SD card" feature. I don't know exactly, but if that time comes, please let me know and I'll do the research necessary to help you out.
-WIth the CM 10.2 I will have my RAM memory more free? It all depends on what apps you have running at one time. I personally use Advanced Task Killer Free to kill apps directly after I'm finished using them, and that frees up a lot of RAM. CM probably overall will make your RAM memory less free, but if you use the app killing trick, you won't ever have a problem with it.
In the attachment are the images of the test Great, thank you for doing that.