Database Info

[Q] Rollback to Froyo from GB 2.3.5 XXKPM on my SGSL i9003

I flashed my SGSL to Gb 2.3.5 XXKPM using Odin, but now India is getting official update from Samsung of GB 2.3.5 so i would like to rollback to froyo as my Kies is not recognizing the current firmware on my SGSL. Is there any solution how to rollback to Froyo back?

tariq_devil said:
I flashed my SGSL to Gb 2.3.5 XXKPM using Odin, but now India is getting official update from Samsung of GB 2.3.5 so i would like to rollback to froyo as my Kies is not recognizing the current firmware on my SGSL. Is there any solution how to rollback to Froyo back?
Click to expand...
Click to collapse
y do u want to update thru kies?
some member had reported that it was taking an age to update via kies and also downloads used to stop halfway its'm.
so just update to the firmware you want thru odin.

isn't there any difference between updating via kies and flashing via odin?

............
never tried via kies, so dont know.
but flashing via odin will save you the trouble of flashing froyo again. so use odin!
and almost everyone uses odin!

i want the stock rom of Froyo which i had when i bought my SGSL.. can u provide me the link and instructions to flash with odin

tariq_devil said:
i want the stock rom of Froyo which i had when i bought my SGSL.. can u provide me the link and instructions to flash with odin
Click to expand...
Click to collapse
http://www.sammobile.com/showthread.php?t=19
instructions : http://forum.xda-developers.com/showthread.php?t=1004622

but i dont remember the froyo version i used.. and which rom should i download

tariq_devil said:
but i dont remember the froyo version i used.. and which rom should i download
Click to expand...
Click to collapse
i dont understand y u want to use kies.
use ODIN!! no need to downgrade to froyo.
if you have xxkpe, then flash it first and then to the whichever gb update

DXKB2 flash ODIN help

ok, phone rooted with one click root now trying to flash cwm with CF Root universal via ODIN. Flased with the provided bagaria-09 GTi9003 tar file. flash was successful but stuck in bootloop. i searched for the entire forum believe me but to no avail. all DXKB2 links are dead. help needed.

why are you going back to DXKB2?
if you really plan on going back to froyo
download links are in sammobile.com but you have to register there first to be able to download
Code:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9003&r=2#regiona
but as a TIP
before going back to DXKB2 download DXKF1 first
flash DXKF1 then DXKB2
***regarding your problem
what was your firmware when you rooted it and applied universal CF by amit?

noypi_ako said:
why are you going back to DXKB2?
if you really plan on going back to froyo
download links are in sammobile.com but you have to register there first to be able to download
Code:
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9003&r=2#regiona
but as a TIP
before going back to DXKB2 download DXKF1 first
flash DXKF1 then DXKB2
***regarding your problem
what was your firmware when you rooted it and applied universal CF by amit?
Click to expand...
Click to collapse
thanks for the reply man. dont plan to go back to DXKB2 trying to upgrade. should i just flash other tar files instead? where can i go from DXKB2? FYI the phone is DXKB2 Froyo.

ahhh
you should not flash amit universal CF root with DXKB2
DXKB2 = froyo
universal CFroot is for gingerbread versions
you should use firmware DXKP9 for your region if you like
or you could also use XXKPQ or XXKPU firmwares
those are gingerbread versions where you can use universal CFroot
if you want to use DXKP9
flash DXKF1 first then afterwards flash DXKP9
but if you want XXKPQ or XXKPU
flash DXKPE first then any of the 2 you like
for firmware flashing you should read and follow guide carefully
http://forum.xda-developers.com/showthread.php?t=1133787

wow.. thanks alot man. somebody need to post this one up.

Firmware version

How can i check the firmware version if my phone is stuck on samsung logo. I cannot dial *#1234#, and was wondering if there was any other way to tell. I bought the phone off ebay, and it worked for a while. Now the phone gets stuck on the samsung logo, so i can't dial that number.

If you are hung up with the boot loop, it's difficult that you'd able to know the firmware.
I suggest flashing a stable stock ROM via Odin.
Go for either xxkpq or,ddlf2.
Detailed procedure to install can be found on the stickies of Android development section.(you'd have to install pit file, then xxkpe, then either xxkpq or ddlf2)
But if you still have warranty left, and want to still retain it, try to see if you can figure from the box or sticker under the battery, the county or region it was made for.
And flash firmware accordingly.
You can find the list of firmware (region specific) on the stickies on development section, with download links.
Press thanks if helped

Hello. Can i flash directly ddlf2 i have pda: jvkpb phone: jxkp3 csc: jvkp7

juztinlee said:
Hello. Can i flash directly ddlf2 i have pda: jvkpb phone: jxkp3 csc: jvkp7
Click to expand...
Click to collapse
No, you can't directly flash ddlf2 directly if you need a clean install.
As ddlf2 is a value pack, you'd need to install xxkpe first, add it has all the components of gingerbread, viz. Bootloader, modem, csc, kernel, pda, param, system etc.
I request you to follow this order.
Latona.pit from xxkpe, then xxkpe, then ddlf2, then appropriate cf root kernel for ddlf2.
Press thanks if helped

If you don't need a clean install, and you are on any gingerbread version, you can flash ddlf2 without any issues.
But it's just recommended to go for a clean install to avoid future problems.
Press thanks if helped

Problem with rooting galaxy sl ginger bread(2.3.6) xxle4

i have rooted my galaxy scl i9003 gingerbread 2.3.6 having baseband version i9003xxle4
with odin v1.85 program with CF-Root file for xxle4 only.But my phone is having random reboots after rooting my device.Can any one tell me how to get out of this issue or how to unroot my device .i also tried unroot.zip from recovery mod .Its not unrooting still i see that cwm,super user .My problem is not fixed.im not sure that unroot.zip is for my baseband version.I want to know how to get out of this issue.
:crying::crying::crying:

Do a wipe data from recovery
sent from Samsung galaxy S i9003 Remics JB v3

agatl said:
i have rooted my galaxy scl i9003 gingerbread 2.3.6 having baseband version i9003xxle4
with odin v1.85 program with CF-Root file for xxle4 only.But my phone is having random reboots after rooting my device.Can any one tell me how to get out of this issue or how to unroot my device .i also tried unroot.zip from recovery mod .Its not unrooting still i see that cwm,super user .My problem is not fixed.im not sure that unroot.zip is for my baseband version.I want to know how to get out of this issue.
:crying::crying::crying:
Click to expand...
Click to collapse
For unrooting your device.. simply re-flash your current baseband firmware (xxle4), and you're unrooted.
For the random reboots problem, which rooting PDA are you using? Try the universal cf-root, it would probably be better. After flashing it, just wipe cache and dalvik.
Cheers

[HELP] i9003 update and root

i everyone my name is sharjeel
i have a problem with my galaxy sl i9003
i have gingerbite 2.3.4 version i want to update my version to 2.3.6 xxkp7 but i not found any firmware file of gingerbite 2.3.6 xkp7 on any website
and i also want to root i flash it as PDA on odin with file " CF-ROOT-XXKPH-21.08.2011" but mu phone is brick
then ia flash with its orgnal firmware with odinthen my phone is ok
xxkpu is available on the web i flash it with odin but this is not work
please i need help
help me experts