Database Info

auto-launch scripts

Ok, searched and couldn't find, so if you know a thread where this is touched upon, please link to the post?
I'm trying to disable a2sd on JAC's latest rom (compcache just makes it so much more livable) and enable linux swap and compcache. what I ended up doing was modifying the a2sd script so that it checks for a third partition instead of a second, that way, I can disable a2sd by not having a third partition. I also changed the swap script to check for a second partition. I'm pretty much making a2sd optional in order to use compcache (since it's the a2sd script that launches the userinit.sh script at /system/sd, if there's no ext partition, it jumps to else and ignores the part to run userinit.sh). Anyway, I'm wondering how it is that a2sd is being launched on startup, and wether it's being launched on every single boot or just on first boot. I'm wondering because i want to replace it with my own script, now, i could either copy the contents of my script to a2sd script, or i could find out how it is that scripts are auto-launched on android so that i can add them later instead of just appending everything to the a2sd script and hoping it works (since some things will conflict).
Here's my modified script, anyway, if anybody is interested in running compcache and swap without a2sd, only need two partitions, fat32 and linux-swap, if you add a third ext2 partition, then you enable a2sd (data, dalvik-cache, and data-private, I like leaving app_s internal for speed):
notice, this is not MY script per se, just modified from jac's a2sd and the userinit.sh for cyanogen's compcache roms
Code:
#!/system/bin/sh
#
# Apps2SD using symlinks and bind mounts
# Thanks to Cyanogen modified by JAC
#
sysctl -p
if [ -e /dev/block/mmcblk0p3 ];
then
# fsck the sdcard filesystem first
e2fsck -y /dev/block/mmcblk0p3;
# set property with exit code in case an error occurs
setprop cm.e2fsck.errors $?;
# mount and set perms
busybox mount -o noatime,nodiratime -t auto /dev/block/mmcblk0p3 /system/sd;
busybox chown 1000:1000 /system/sd;
busybox chmod 771 /system/sd;
# clean up any old symlinks, create data directories
for i in dalvik-cache data;
do
if [ -h /data/$i ];
then
rm /data/$i;
fi;
if [ ! -d /data/$i ];
then
mkdir /data/$i;
busybox chown 1000:1000 /data/$i;
busybox chmod 771 /data/$i;
fi;
done;
# don't allow /data/data on sd because of upgrade issues - move it if possible
if [ -d /system/sd/data ];
then
busybox cp -a /system/sd/data/* /data/data/;
busybox rm -rf /system/sd/data;
fi;
# move apps and dalvik cache from internal memory to sdcard
for i in app dalvik-cache app-private;
do
if [ ! -d /system/sd/$i ];
then
mkdir /system/sd/$i;
fi
busybox chown 1000:1000 /system/sd/$i;
busybox chmod 771 /system/sd/$i
if [ -d /data/$i ] && [ ! -h /data/$i ];
then
busybox cp -a /data/$i/* /system/sd/$i/;
busybox rm -f /data/$i/*;
fi;
done;
# symlink app dirs - they must be on the same filesystem
for i in app dalvik-cache app-private;
do
if [ -d /data/$i ] && [ ! -h /data/$i ];
then
busybox rm -rf /data/$i;
busybox ln -s /system/sd/$i /data/$i;
fi;
done;
# clean up old whiteouts
for i in local misc property system tombstones data;
do
if [ -h /system/sd/$i ]; then rm -f /system/sd/$i; fi
done;
# please don't put odex files in the app directory people!
# it causes dexopt to crash when switching builds!
busybox rm -f /system/sd/app/*.odex
# call a userinit.sh script if it's present on the sdcard
if [ -e /system/sd/userinit.sh ];
then
/system/bin/sh /system/sd/userinit.sh;
fi;
setprop cm.a2sd.active 1;
else
# replace symlinks with directories so we can boot without sd
for i in app app-private;
do
if [ -h /data/$i ];
then
rm -f /data/$i;
mkdir /data/$i;
busybox chown 1000:1000 /data/$i;
busybox chmod 771 /data/$i;
fi;
done;
setprop cm.a2sd.active 0;
fi;
sync;
setprop cm.filesystem.ready 1;
#!/system/bin/sh
# Thanks to Denkai/Dwang
if [ -n /dev/block/mmcblk0p2 ];
then
mkswap /dev/block/mmcblk0p2;
fi;
if [ -e /dev/block/mmcblk0p2 ];
then
echo 20 > /proc/sys/vm/swappiness;
swapon /dev/block/mmcblk0p2;
fi;
insmod /system/modules/lib/modules/2.6.29-cm/compcache/xvmalloc.ko;
insmod /system/modules/lib/modules/2.6.29-cm/compcache/ramzswap.ko disksize_kb=24000;
mknod /dev/ramzswap0 b 253 0;
echo 20 > /proc/sys/vm/swappiness;
swapon /dev/ramzswap0;
exit;

[SCRIPT] 32A - 32B detection script

Hi,
I don't know how-to detect if a device is 32B or 32A automatically.... Logically, if we do a free command during recovery install, we can AUTOMATICALLY check if it's a 32B/A, then, we create a gile on sdcard called 32B/A, or a prop, and when it flash kernel, or wifi module or sound things, we include this prop in the script
Can anyone create this script?
[EDIT]
Many Thanks to Firerat who mades the script, and a little to me, who has the idea!
So the script is here:
Code:
#!/sbin/sh
# Idea : Artifex14
# script : Firerat => THE BEST!
# 28.06.10
ram=`free|awk '/Mem/ { print $2 }'`
if [ "ram" -gt "97884" ];
then
model=32a
echo "32a"
else
model=32b
echo "This device is a 32b"
fi
if [ "model" = "32a" ];
then
ln -s /tmp/boot.img /tmp/boot32a.img
ln -s /dev/null /tmp/boot32b.img
else
ln -s /tmp/boot.img /tmp/boot32b.img
ln -s /dev/null /tmp/boot32a.img
fi

I thought about this too. It could be done at the time the rom is flashed, but up to now I only know how to make update-script, not updater-script or update-binary. You could pack all sorts of boot images, and then, say, a system-dream, system-sapphire, and system-magic folder and depending on the board version property, flash the appropriate versions of files, at least in theory that should work, plus it prevents you from having to flash extra files just for cross-device compatibility.

jubeh said:
I thought about this too. It could be done at the time the rom is flashed, but up to now I only know how to make update-script, not updater-script or update-binary. You could pack all sorts of boot images, and then, say, a system-dream, system-sapphire, and system-magic folder and depending on the board version property, flash the appropriate versions of files, at least in theory that should work, plus it prevents you from having to flash extra files just for cross-device compatibility.
Click to expand...
Click to collapse
Can you do the script? For the updaterscript, it's OK!

et a script to run
Code:
free|awk '/Mem/ { print $2 }'
and test that, e.g.
Code:
#!/sbin/sh
# KernelPrep.sh
ram=`free|awk '/Mem/ { print $2 }'`
if [ "ram" -gt "97884" ];
then
model=32a
else
model=32b
fi
if [ "model" = "32a" ];
then
ln -s /tmp/boot.img /tmp/boot32a.img
ln -s /dev/null /tmp/boot32b.img
else
ln -s /tmp/boot.img /tmp/boot32b.img
ln -s /dev/null /tmp/boot32a.img
fi
get your updater script to run that, then copy your kernels to /tmp/
Code:
package_extract_dir("kernels", "/tmp");
or
Code:
copy_dir PACKAGE:kernels TMP:
next you can
Code:
write_raw_image("/tmp/boot.img", "boot"),
or
Code:
write_raw_image TMP:boot.img BOOT:
edit:
ps, you don't really need the second if statement, but its easier to read like that
oops , nearly forgot about the kernel modules
Code:
mount /system
install -d /system/lib/modules
ln -s /system/lib/modules /tmp/modules32a
ln -s /dev/null /tmp/modules32b

Firerat said:
et a script to run
Code:
free|awk '/Mem/ { print $2 }'
and test that, e.g.
Code:
#!/sbin/sh
# KernelPrep.sh
ram=`free|awk '/Mem/ { print $2 }'`
if [ "ram" -gt "97884" ];
then
model=32a
else
model=32b
fi
if [ "model" = "32a" ];
then
ln -s /tmp/boot.img /tmp/boot32a.img
ln -s /dev/null /tmp/boot32b.img
else
ln -s /tmp/boot.img /tmp/boot32b.img
ln -s /dev/null /tmp/boot32a.img
fi
get your updater script to run that, then copy your kernels to /tmp/
Code:
package_extract_dir("kernels", "/tmp");
or
Code:
copy_dir PACKAGE:kernels TMP:
next you can
Code:
write_raw_image("/tmp/boot.img", "boot"),
or
Code:
write_raw_image TMP:boot.img BOOT:
edit:
ps, you don't really need the second if statement, but its easier to read like that
oops , nearly forgot about the kernel modules
Code:
mount /system
install -d /system/lib/modules
ln -s /system/lib/modules /tmp/modules32a
ln -s /dev/null /tmp/modules32b
Click to expand...
Click to collapse
I'll try that, THANK!

oops typo
if [ "ram" -gt "97884" ];
should be
if [ "$ram" -gt "97884" ];

[Q] How do i Odex a build from my computer

all of the tutorials i have seen on how to odex is pushing a script to the phone after its installed i am looking to do this before first boot. any help its appreciated

here is the script from an and build, try in linux and see what happens (of course edit for your folder structure)
#!/system/bin/sh
#
# system/app odex-er by Paul O'Brien @ www.MoDaCo.com
#
# experimental - nandroid backup before you run this script!
#
# version 0.1, 29th January 2010
# updated by Martin Johnson, M.J.Johnson @ massey.ac.nz June 2010 for Vogue
#
rm /tmp.odex
cd /data/app
# Check for and delete leftover .odex files after uninstalled apps
for filename in *.odex
do
name=`basename $filename .odex`
if [ ! -f $name.apk -a -f $filename ]
then
rm $filename
echo "Removed $filename"
fi
done;
# Loop through all installed apps
for filename in *.apk
do
name=`basename $filename .apk`
if [ ! -f $name.odex -o $filename -nt $name.odex ]
then
# step 1 - odex the apk
rm -f /tmp.odex
/system/bin/dexopt-wrapper $filename /tmp.odex
# step 2 - did we succesfully odex?
if [ $? -eq 0 ]
then
# step 3 - remove the classes.dex from the apk
/system/bin/zip -d $filename classes.dex
# continue only if classes.dex was present
if [ $? -eq 0 ]
then
# step 4 - zipalign, just in case
/system/bin/zipalign -f -v 4 $filename /$filename.new
mv -f /$filename.new $filename
mv -f /tmp.odex $name.odex
touch $name.odex
echo "Odexed $filename"
else
echo "Error $filename did not contain classes.dex"
fi
else
echo "Error creating odex from $filename"
fi
else
echo "Nothing to do: $filename"
fi
done;

Any more thoughts??

Unroot for linux

Heres a modded linux script based on the defyroot script to unroot your defy
Code:
#!/bin/bash
# execute as bash root_Defy.v2
# Following Bin4ry instructions
# Using http://c-skills.blogspot.com/2010/07/android-trickery.html exploit
# See http://intrepidusgroup.com/insight/2010/09/android-root-source-code-looking-at-the-c-skills/ for an explanation of the exploit
ADB="./adblinux"
if [ ! -e $ADB ] ; then
echo "adb not found! Cannot continue." ;
exit 1 ;
fi
chmod +x $ADB
if [ $(grep -ic 22b8 /etc/udev/rules.d/51-android.rules) -eq 0 ] ; then
echo "SUBSYSTEM=="usb", ATTRS{idVendor}==\"22b8\", MODE=\"0666\"" >> /etc/udev/rules.d/51-android.rules ;
fi
if [ $($ADB devices | grep -c device$) -ne 1 ] ; then
echo "Too many devices attached: exiting!" ;
exit 1;
fi
SERIALNO=`$ADB devices | grep device$ | cut -f1`
if [ $? -eq 0 ] ; then
echo "Found device $SERIALNO" ;
else
echo "Error searching device number!" ;
exit 1;
fi
for file in rageagainstthecage su Superuser.apk ; do
echo -n "Pushing $file: " ;
$ADB -s $SERIALNO push $file /data/local/tmp/$file ;
echo "done" ;
done
#$ADB -s $SERIALNO push rageagainstthecage /data/local/tmp/rageagainstthecage
#$ADB -s $SERIALNO push su /data/local/tmp/su
#$ADB -s $SERIALNO push Superuser.apk /data/local/tmp/Superuser.apk
echo -n "Making rageagainstthecage executable and executing it: "
$ADB -s $SERIALNO shell chmod 755 /data/local/tmp/rageagainstthecage
$ADB -s $SERIALNO shell /data/local/tmp/rageagainstthecage
echo "done"
echo "Waiting 15 sec for phone adbd to restart before continuing"
sleep 15
echo -n "Remounting filesystem in read-write mode: "
$ADB -s $SERIALNO shell mount -o remount,rw -t ext3 /dev/block/mmcblk1p21 /system
echo "done"
echo -n "Removing su command: "
$ADB -s $SERIALNO shell rm /system/bin/su
echo "done"
echo -n "Removing Superuser apk: "
$ADB -s $SERIALNO shell rm /system/app/Superuser.apk
echo "done"
exit 0

added to linux tools, thanks!

By editing the original I could ensure that only what was created in the original, was altered, although in theory you should be able to strip or add anyfiles you want in the same way.
Works for sure on fedora 15 and opensuse11.4 and any the original script works on.

[SCRIPT/ZIP][v1.3] Init.d enabler @ stock kernel / ALL DEVICES / NO BUSYBOX needed

I present you universal script to enable Init.d in ALL ANDROID DEVICES (I hope...) while running the stock kernel. NO BUSYBOX needed! It is packed in easy to use ZIP flashable
EDIT: This script will NOT work with Magisk! However, notice that using Magisk you do not need init.d support at all (you can put your scripts in /magisk/.core/post-fs-data.d OR /magisk/.core/service.d, depending on your needs).
Requirements:
- a rooted Android device (SuperSU)
- ANY tool to flash a ZIP (custom recovery or FlashFire app)
Installation:
1. Custom recovery - open file using "Install Zip" option and confirm "Yes - install..."
2. FlashFire - open file using "Flash ZIP or OTA" option (default mount options). Tap "FLASH"
How to check:
Just check if /data/initd_test.log file exists (optionally you can check its content)
Changelog:
v1.3:
★ This version automatically detects privileges of launched sh script used to trigger init.d and if these are not sufficient to remount /system rw - all commands are automatically expanded to "/su/bin/su -c [command]" or "/system/xbin/su -c [command]" (depending on SuperSU install mode)
★ Fixed problem with "exit 0" at the end of used sh script resulting that simply added new lines never worked. This version automatically detects such case and moves "exit 0" at the end of modified file
★ SELinux context autodetection - starting from v1.3 modified file has always exact same context as original file
★ BusyBox will not be used anymore, even if exists (checking the presence removed)
v1.2:
★ Starting from this version installer performs more secure and only 100% reversible actions. Original *.sh file is never touched (just renamed to *.bak to keep its original attributes, including context). Installer will try to set to modified file as many attributes taken from original file as possible (instead of forcing "known values").
★ Added initd_remover.zip. Use it if you want to remove Init.d support (enabled by script from this thread!) and restore 100% original system files
v1.1:
★ Avoids potential WiFi problems in case of Samsung S6 (and probably other Samsung's Exynos based devices running Android 6.0.1) - see post #3
v1.0:
★ Initial version
Enabler [sh script]:
Code:
#!/sbin/sh
# Init.d enabler by ALEXNDR (_alexndr @ XDA)
OUTFD=/proc/self/fd/$2
ui_print() {
echo -n -e "ui_print $1\n" >> $OUTFD
echo -n -e "ui_print\n" >> $OUTFD
}
set_perm() {
chown $1.$2 $4
chown $1:$2 $4
chmod $3 $4
if [ -z "$5" ] ; then
chcon u:object_r:system_file:s0 $4
else
chcon u:object_r:$5:s0 $4
fi
}
resolve_link() {
if [ -z "$1" ] || [ ! -e $1 ] ; then return 1 ; fi
local VAR=$1
while [ -h "$VAR" ] ; do
VAR=$(readlink $VAR)
done
echo $VAR
}
is_mounted() {
if [ -z "$2" ] ; then
cat /proc/mounts | grep $1 >/dev/null
else
cat /proc/mounts | grep $1 | grep "$2," >/dev/null
fi
return $?
}
ui_print " "
ui_print "=========================================="
ui_print "Init.d enabler by ALEXNDR (_alexndr @ XDA)"
ui_print "=========================================="
ui_print " "
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/app$")) ||
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/system$"))
if (! is_mounted /system) ; then mount -o rw /system ; fi
if (! is_mounted /system rw) ; then mount -o rw,remount /system ; fi
if (! is_mounted /system rw) ; then mount -t ext4 -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then mount -t f2fs -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then
ui_print "Failed! Can't mount /system rw, aborting!"
ui_print " "
exit 1
fi
SYSLIB=/system/lib
cat /system/build.prop | grep "ro.product.cpu.abilist=" | grep "64" >/dev/null && SYSLIB=/system/lib64
cat /system/build.prop | grep "ro.product.cpu.abi=" | grep "64" >/dev/null && SYSLIB=/system/lib64
# These files are prefered to trigger init.d scripts (in following order, if exists):
# /system/etc/init.*.post_boot.sh
# /system/etc/*.post_boot.sh
# /system/etc/init.*.boot.sh
# /system/etc/*.boot.sh
#
# /system/bin/debuggerd is used if there is no suitable *.sh file in /system/etc
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
BOOTCON=$(ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
if [ -z "$BOOTCON" ] ; then
BOOTCON=$(LD_LIBRARY_PATH=$SYSLIB /system/bin/toolbox ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
fi
if [ -z "$BOOTCON" ] ; then
BOOTCON=$(LD_LIBRARY_PATH=$SYSLIB /system/bin/toybox ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
fi
if [ -z "$BOOTCON" ] ; then
BOOTCON=system_file
fi
cat $BOOTFILE | grep "^exit 0" >/dev/null && EXIT=true || EXIT=false
if [ -z "$(cat $BOOTFILE | grep "Init\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ ! -f /system/bin/debuggerd_real ] ; then
mv -f $BOOTFILE /system/bin/debuggerd_real
echo "#!/system/bin/sh" > $BOOTFILE
else
sed -i '/debuggerd_real/d' $BOOTFILE
fi
else
mv -f $BOOTFILE "$BOOTFILE.bak"
cp -pf "$BOOTFILE.bak" $BOOTFILE
if ($EXIT) ; then sed -i '/^exit 0/d' $BOOTFILE ; fi
echo "" >> $BOOTFILE
fi
echo "# Init.d support" >> $BOOTFILE
echo 'SU="$(ls /su/bin/su 2>/dev/null || ls /system/xbin/su) -c"' >> $BOOTFILE
echo 'mount -o rw,remount /system && SU="" || eval "$SU mount -o rw,remount /system"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d/*"' >> $BOOTFILE
echo 'eval "$SU mount -o ro,remount /system"' >> $BOOTFILE
echo 'ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do eval "$SU /system/bin/sh $xfile" ; done' >> $BOOTFILE
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
echo '/system/bin/debuggerd_real [email protected]' >> $BOOTFILE
set_perm 0 2000 755 $BOOTFILE $BOOTCON
else
if ($EXIT) ; then echo "exit 0" >> $BOOTFILE ; fi
chcon u:object_r:$BOOTCON:s0 $BOOTFILE
fi
mkdir -p /system/etc/init.d
echo "#!/system/bin/sh" > /system/etc/init.d/00test
echo "# Init.d test" >> /system/etc/init.d/00test
echo 'echo "Init.d is working !!!" > /data/initd_test.log' >> /system/etc/init.d/00test
echo 'echo "excecuted on $(date +"%d-%m-%Y %r")" >> /data/initd_test.log' >> /system/etc/init.d/00test
echo "#!/system/bin/sh" > /system/etc/init.d/99SuperSUDaemon
echo "/system/xbin/daemonsu --auto-daemon &" >> /system/etc/init.d/99SuperSUDaemon
set_perm 0 0 777 /system/etc/init.d
set_perm 0 0 777 "/system/etc/init.d/*"
ui_print "Init.d has been successfully enabled"
ui_print "using following file run at boot:"
ui_print " "
ui_print "$BOOTFILE"
ui_print " "
ui_print "Check result in /data/initd_test.log file"
ui_print " "
else
ui_print "Init.d is enabled already, aborting!"
ui_print " " # exit is not necessary
fi
umount /system
exit 0
Remover [sh script]:
Code:
#!/sbin/sh
# Init.d remover by ALEXNDR (_alexndr @ XDA)
OUTFD=/proc/self/fd/$2
ui_print() {
echo -n -e "ui_print $1\n" >> $OUTFD
echo -n -e "ui_print\n" >> $OUTFD
}
resolve_link() {
if [ -z "$1" ] || [ ! -e $1 ] ; then return 1 ; fi
local VAR=$1
while [ -h "$VAR" ] ; do
VAR=$(readlink $VAR)
done
echo $VAR
}
is_mounted() {
if [ -z "$2" ] ; then
cat /proc/mounts | grep $1 >/dev/null
else
cat /proc/mounts | grep $1 | grep "$2," >/dev/null
fi
return $?
}
ui_print " "
ui_print "=========================================="
ui_print "Init.d remover by ALEXNDR (_alexndr @ XDA)"
ui_print "=========================================="
ui_print " "
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/app$")) ||
SYSTEM=$(resolve_link $(find /dev/block/platform -type l | grep -i -m 1 "/system$"))
if (! is_mounted /system) ; then mount -o rw /system ; fi
if (! is_mounted /system rw) ; then mount -o rw,remount /system ; fi
if (! is_mounted /system rw) ; then mount -t ext4 -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then mount -t f2fs -o rw $SYSTEM /system ; fi
if (! is_mounted /system rw) ; then
ui_print "Failed! Can't mount /system rw, aborting!"
ui_print " "
exit 1
fi
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
if [ ! -z "$(cat $BOOTFILE | grep "Init\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ -f /system/bin/debuggerd_real ] ; then
rm -f $BOOTFILE
mv -f /system/bin/debuggerd_real $BOOTFILE
else
ui_print "Failed! Missing debuggerd_real file!"
exit 1
fi
elif [ -f "$BOOTFILE.bak" ] ; then
rm -f $BOOTFILE
mv -f "$BOOTFILE.bak" $BOOTFILE
else
ui_print "Failed! Missing *.sh.bak file!"
exit 1
fi
rm -Rf /system/etc/init.d
ui_print "Init.d has been successfully removed :)"
else
ui_print "Init.d by ALEXNDR has not been detected!"
fi
ui_print " "
umount /system
exit 0
NOTE:
If it does not work for your device - please post here a feedback! I will try to find a reason and tune my script
Credits: @Chainfire, @JustArchi
Hit Thanks button if you like my work. If you really appreciate my work - feel free to buy me a beer

Great Work..
Thanks

@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks

thereassaad said:
@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks
Click to expand...
Click to collapse
In my case work good no problem with WiFi connection on S5 MM 6.0.1
Regards

thereassaad said:
@_alexndr mate today i tried ur init.d enabled but on my s6 mm 6.0.1 its bricked my wifi as after flashing ur script i can't get wifi connected any fix for MM ?? Thanks
Click to expand...
Click to collapse
Strange as my installer in case of G920F should only add to /system/etc/init.sec.boot.sh following lines:
Code:
# Init.d support
mount -o rw,remount /system
chmod 777 /system/etc/init.d
chmod 777 /system/etc/init.d/*
mount -o ro,remount /system
busybox run-parts /system/etc/init.d
or following if busybox has not been installed:
Code:
# Init.d support
mount -o rw,remount /system
chmod 777 /system/etc/init.d
chmod 777 /system/etc/init.d/*
mount -o ro,remount /system
ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do $xfile ; done
Original file should be renamed to /system/etc/init.sec.boot.sh.bak, so you can just delete modified init.sec.boot.sh and then rename init.sec.boot.sh.bak -> init.sec.boot.sh to revert changes (+ delete /system/etc/init.d folder but it's just a cosmetic)
...but before you do it - it would be great if you help in further development and try if following command put in terminal emulator or adb shell will help:
Code:
su
mount -o rw,remount /system
chmod 550 /system/etc/init.sec.boot.sh
chown 0:2000 /system/etc/init.sec.boot.sh
chcon u:object_r:sec-sh_exec:s0 /system/etc/init.sec.boot.sh
mount -o ro,remount /system
...then reboot device
EDIT:
Anyway - #1 has been updated as I found potential permissions / SELinux context mismatch in case of Samsung's Exynos based devices running Android 6.0.1. NOTE: It will not fix broken installation already done - you need to revert changes first (as I mentioned above - by deleting init.sec.boot.sh and renaming init.sec.boot.sh.bak -> init.sec.boot.sh) and then re-flash v1.1

Another update
Changelog:
v1.2:
★ Starting from this version installer performs more secure and only 100% reversible actions. Original *.sh file is never touched (just renamed to *.bak to keep its original attributes, including context). Installer will try to set to modified file as many attributes taken from original file as possible (instead of forcing "known values").
★ Added initd_remover.zip. Use it if you want to remove Init.d support (enabled by script from this thread!) and restore 100% original system files

@_alexndr , definitely mate will give a shot , later , thanks for ur work xD ,

good work bro will test more with new update

Good work ?
Sent from my A66A using XDA-Developers mobile app

Another update
Changelog:
v1.3:
★ This version automatically detects privileges of launched sh script used to trigger init.d and if these are not sufficient to remount /system rw - all commands are automatically expanded to "/su/bin/su -c [command]" or "/system/xbin/su -c [command]" (depending on SuperSU install mode)
★ Fixed problem with "exit 0" at the end of used sh script resulting that simply added new lines never worked. This version automatically detects such case and moves "exit 0" at the end of modified file
★ SELinux context autodetection - starting from v1.3 modified file has always exact same context as original file
★ BusyBox will not be used anymore, even if exists (checking the presence removed)

First of all really thank you for this script which works very well...except if included in the installation script.
The initd.sh is this
I use this command in the updater-script:
ui_print("@ Add init.d support");
package_extract_file("tools/initd.sh", "/tmp/initd.sh");
set_perm(0, 0, 0777, "/tmp/initd.sh");
run_program("/tmp/initd.sh");
delete("/tmp/initd.sh");
ui_print("--> Init.d Installed");
But not working. Got this error in recovery log
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Any advice or a proper .sh script please ?
Thanks very much.

WILMANS2M said:
First of all really thank you for this script which works very well...except if included in the installation script.
The initd.sh is this
I use this command in the updater-script:
ui_print("@ Add init.d support");
package_extract_file("tools/initd.sh", "/tmp/initd.sh");
set_perm(0, 0, 0777, "/tmp/initd.sh");
run_program("/tmp/initd.sh");
delete("/tmp/initd.sh");
ui_print("--> Init.d Installed");
But not working. Got this error in recovery log
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Any advice or a proper .sh script please ?
Thanks very much.
Click to expand...
Click to collapse
My script (as it is in post #1) is designed to be standalone installer. If you want to enable init.d by a sh script called from the updater-script - please try as follow:
Code:
#!/sbin/sh
# Init.d enabler by ALEXNDR (_alexndr @ XDA)
set_perm() {
chown $1.$2 $4
chown $1:$2 $4
chmod $3 $4
if [ -z "$5" ] ; then
chcon u:object_r:system_file:s0 $4
else
chcon u:object_r:$5:s0 $4
fi
}
# These files are prefered to trigger init.d scripts (in following order, if exists):
# /system/etc/init.*.post_boot.sh
# /system/etc/*.post_boot.sh
# /system/etc/init.*.boot.sh
# /system/etc/*.boot.sh
#
# /system/bin/debuggerd is used if there is no suitable *.sh file in /system/etc
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.post_boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "/init\..*\.boot\.sh$") ||
BOOTFILE=$(ls /system/etc/*.sh 2>/dev/null | grep -m 1 "\.boot\.sh$") ||
BOOTFILE=/system/bin/debuggerd
BOOTCON=$(ls -Z $BOOTFILE 2>/dev/null | grep "u:object_r" | cut -d: -f3)
if [ -z "$BOOTCON" ] ; then
BOOTCON=system_file
fi
cat $BOOTFILE | grep "^exit 0" >/dev/null && EXIT=true || EXIT=false
if [ -z "$(cat $BOOTFILE | grep "[Ii]nit\.d")" ] ; then
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
if [ ! -f /system/bin/debuggerd_real ] ; then
mv -f $BOOTFILE /system/bin/debuggerd_real
echo "#!/system/bin/sh" > $BOOTFILE
else
sed -i '/debuggerd_real/d' $BOOTFILE
fi
else
mv -f $BOOTFILE "$BOOTFILE.bak"
cp -pf "$BOOTFILE.bak" $BOOTFILE
if ($EXIT) ; then sed -i '/^exit 0/d' $BOOTFILE ; fi
echo "" >> $BOOTFILE
fi
echo "# Init.d support" >> $BOOTFILE
echo 'SU="$(ls /su/bin/su 2>/dev/null || ls /system/xbin/su) -c"' >> $BOOTFILE
echo 'mount -o rw,remount /system && SU="" || eval "$SU mount -o rw,remount /system"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d"' >> $BOOTFILE
echo 'eval "$SU chmod 777 /system/etc/init.d/*"' >> $BOOTFILE
echo 'eval "$SU mount -o ro,remount /system"' >> $BOOTFILE
echo 'ls /system/etc/init.d/* 2>/dev/null | while read xfile ; do eval "$SU /system/bin/sh $xfile" ; done' >> $BOOTFILE
if [ "$BOOTFILE" = "/system/bin/debuggerd" ] ; then
echo '/system/bin/debuggerd_real [email protected]' >> $BOOTFILE
set_perm 0 2000 755 $BOOTFILE $BOOTCON
else
if ($EXIT) ; then echo "exit 0" >> $BOOTFILE ; fi
chcon u:object_r:$BOOTCON:s0 $BOOTFILE
fi
mkdir -p /system/etc/init.d
echo "#!/system/bin/sh" > /system/etc/init.d/00test
echo "# Init.d test" >> /system/etc/init.d/00test
echo 'echo "Init.d is working !!!" > /data/initd_test.log' >> /system/etc/init.d/00test
echo 'echo "excecuted on $(date +"%d-%m-%Y %r")" >> /data/initd_test.log' >> /system/etc/init.d/00test
echo "#!/system/bin/sh" > /system/etc/init.d/99SuperSUDaemon
echo "/system/xbin/daemonsu --auto-daemon &" >> /system/etc/init.d/99SuperSUDaemon
set_perm 0 0 777 /system/etc/init.d
set_perm 0 0 777 "/system/etc/init.d/*"
fi
exit 0

Thanks for the answer. Will try it asap and give you feedback.
Envoyé de mon GT-I9505 en utilisant Tapatalk

hello @_alexndr
So tried again with the sh modified script, but same thing. Same error and no initd installed unfortunately
If you have any other advice, i really thank you in advance.

i tried something different. I keep your original zip file, and put it in tools/initd folder in my custom rom
Then i added this in the updater script:
ui_print("@ Add init.d support");
package_extract_dir("tools/initd", "/tmp/initd");
run_program("/sbin/busybox", "unzip", "/tmp/initd/initd.any.stock.1.3.zip", "META-INF/com/google/android/*", "-d", "/tmp/initd");
run_program("/sbin/busybox", "sh", "/tmp/initd/META-INF/com/google/android/update-binary", "dummy", "1", "/tmp/initd/initd.any.stock.1.3.zip");
ui_print("--> Init.d Installed");
IT WORKS with this
Thanks

great job

You sir are an animal. This script is intelligently designed

Deleted

Hey, Firstly thanks for all your work!
I've not tried this yet but I'm working on stock based ROM nd I want to enable to init.d support in it.
I've used the SuperR's Kitchen to enable the init.d support in the kernel nd I could find the script in the kernel too. Not sure if it'll work or not as I haven't tested in yet. So I hope you can tell me if I need to enable this way too or not,
Thanks.

@_alexndr
Thanks a lot
Confirmed Working on Samsung Galaxy S5 G900H
OS: Stock Deodexed Marshmallow 6.0.1 with GreenApple Kernal